Hi, I been using Openhab for long now. And I must say I love it. I run Openhab on Ubuntu and this week the system did an automatic upgrade to version 2.1. After that Openhab does not start any more. ● openhab2.service - openHAB 2 - empowering the smart home Loaded: loaded (/usr/lib/systemd/system…

[image] Dim: java -version Thanks Brend. I removed all rules and I get the same problem.

[image] Francisco_Javier_Mor: java -version java version “1.8.0_131” Java™ SE Runtime Environment (build 1.8.0_131-b11) Java HotSpot™ Server VM (build 25.131-b11, mixed mode)

[image] Dim: /var/lib/openhab2/tmp/* & /var/lib/openhab2/cache/* and start again OH2 to see if this helps. /var/lib/openhab2/tmp/* it is empty /var/lib/openhab2/cache/* does not exist Thanks Angelos for your help

I don’t know what could be going wrong… try /usr/share/openhab2/start_debug.sh to see if there are more useful info posted in the openhab.log

I get this: Launching the openHAB runtime… Listening for transport dt_socket at address: 5005 WARN: can’t update etc/config.properties with the generated command shutdown. We advise to manually add the karaf.shutdown.command property. !SESSION 2017-07-11 18:59:58.250 ----------------------------…

[image] Francisco_Javier_Mor: Unable to create lock manager permissions (maybe?) [image] OH2 does not start. Under-priviledged? Runtime Ok, I changed the setup that openhab user was able to login by: changing shell in /etc/passwd from bin/flase to bin/…

That sounds as if openHAB has lost permissions to access it’s folders, if you’re running apt, then the user:group config should be set to openhab:openhab, does a sudo chown -R openhab:openhab [dir] on each of openHAB’s directories solve the problem? i.e. sudo chown -R openhab:openhab /var/lib/openh…

It did not work. Now I get: Jul 12 00:14:57 CASA-GB systemd[1]: Started openHAB 2 - empowering the smart home. Jul 12 00:14:57 CASA-GB start.sh[28742: Launching the openHAB runtime… Jul 12 00:14:58 CASA-GB start.sh[28742: WARN: can’t update etc/config.properties with the generated command shutdow…

I’m completely baffled, as far as you know this is a standard install of openHAB? I’ve not seen this before. I’d suggest making a backup of the /var/lib/openhab2, and /etc/openhab2 at this point just in case we need to do a purge and reinstall. Would you be able to post the response of these comman…

[image] Benjy: ls -al /var/log/openhab2 /usr/share/openhab2/bin /var/lib/openhab2 ls -al /var/log/openhab2 /usr/share/openhab2/bin /var/lib/openhab2 /usr/share/openhab2/bin: total 8 drwxr-xr-x 2 777 openhab 4096 jul 11 10:48 . drwxr-xr-x 5 777 openhab 4096 jul 11 10:48 .. -rwxrwxr-x 1 77…

Upgrade to Openhab 2.1 fail to start

Setup, Configuration and Use Installation

Dim (Angelos) July 11, 2017, 5:03pm 9

permissions (maybe?)