Hi all, I’ve been developing a binding for older Vallox SE model air ventilation units. To be exact, I continued @SuperOok ’s work. N̶o̶w̶ ̶I̶ ̶m̶a̶d̶e̶ ̶[̶P̶R̶ ̶#̶6̶4̶5̶9̶]̶(̶h̶t̶t̶p̶s̶:̶/̶/̶g̶i̶t̶h̶u̶b̶.̶c̶o̶m̶/̶o̶p̶e̶n̶h̶a̶b̶/̶o̶p̶e̶n̶h̶a̶b̶2̶-̶a̶d̶d̶o̶n̶s̶/̶p̶u̶l̶l̶/̶6̶4̶5̶9̶)̶ ̶t̶o̶ ̶g̶e̶t̶ ̶i̶…

With the update to OpenHAB 2.5.4 I can no longer adjust values. I get the following error message from the binding: 2020-04-23 08:01:32.620 [ome.event.ItemCommandEvent] - Item 'FanSpeed2' received command 3 2020-04-23 08:01:32.651 [nt.ItemStatePredictedEvent] - FanSpeed2 predicted to become 3 2020-…

I have two things in my home currently: Vallox 350 SE-E ventilation system OpenHAB 2.5.4 running on a host with close physical proximity to the Vallox main unit Now I want to connect both using the binding. Is there any kind of documentation on the physical link that needs to be established? A li…

[image] Sebastian_Neu: What does Unsupported command mean? It means that my UoM implementattion didn’t go as planned :D, and DecimalType commands aren’t accepted. I’ll fix it but before that you can downgrade if 2.5.3-SNAPSHOT was working better: JFrog Hi @martingruening , first thing you ne…

[image] gitMiguel: first thing you need is a RS485 adapter for the physical connection. For now I’m using USB to RS485 converter. Connection diagrams can be found in your machines manual. You can start by familiarize yourself with RS485 . Thanks for letting me know. I just ordered a RS485 USB …

[image] martingruening: Can I add the new RS485 connection in parallel? Yes. I have the exact same setup with my 110 SE R unit.

With the newest version for me it’s possible to set the fan speed for one time. After the second try the following error message appears: 2020-04-28 13:57:53.208 [ome.event.ItemCommandEvent] - Item 'FanSpeed' received command 4 2020-04-28 13:57:53.230 [nt.ItemStatePredictedEvent] - FanSpeed predic…