Hi,
I have a new install running openhabian on a RPi4 (2GB)
I have about 30 z-wave devices in it already, and a few rules.
Today, I added an Aeon labs Wallmote Quad (ZW130).
Tapping the 4 buttons work, and I can see the scene number 1.0/1.2/1.1/… in the log when I press/hold/release the buttons. However: when I slide up or down on the surface, the button itself gives me feedback (sound and haptic) but OpenHAB2 is not seeing the event.
I can see the channels “Swipe Switch 1…4” / “Scene number 1…4” but when I connect them to a script, they are never triggered. Also the log does not show any sign of the slide operation being received.
I already tried the examples I saw here:
and I also reviewed the information in the thread “noob-question-about-z-wave-aeotec-wallmote-quad”, but so far I have not been able to get OH2 to register the slide operations.
I have also tried to exclude and re-include the device in my zwave network, but that also did not make a difference.
I would greatly appreciate all the help I could get to debug this.
Thanks & best regards,
Johan
- Platform information:
- Hardware: Raspberry Pi 4 Model B Rev 1.1
- OS: Raspbian GNU/Linux 10 (buster)
- openHAB version: 2.5.1-2 (Release Build)