Dear all
I just had a look in my logfile and found the following messages:
2016-08-21 20:14:26.221 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:14:26.221 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '6/0/6' = '2'
2016-08-21 20:14:36.576 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:14:36.576 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '6/0/6' = '1'
2016-08-21 20:14:46.699 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:14:46.699 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '6/0/6' = '0'
2016-08-21 20:14:56.925 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:14:56.925 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Give up, could not read address '6/0/6' after '3' retries.
2016-08-21 20:15:21.111 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:15:21.111 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '6/0/6' = '2'
2016-08-21 20:15:31.475 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:15:31.475 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '6/0/6' = '1'
2016-08-21 20:15:41.594 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:15:41.594 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '6/0/6' = '0'
2016-08-21 20:15:51.815 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Fassade1_Wind_Ausfahrsperre_Status' from KNX bus: timeout waiting for group read response: timeout
2016-08-21 20:15:51.815 [WARN ] [.KNXBindingDatapointReaderTask] - Autorefresh: Give up, could not read address '6/0/6' after '3' retries.
This Warning/Error is repeated every minute.
The strange thing is: this item is disabled in the item file. Why do I still get these error messages?
//Switch Fassade1_Wind_Ausfahrsperre_Status "Fass.1 Wind Ausfahrsperre Status (1:Ein | 0:Aus) - Ausgang [%s]" (gFass1, gWS) {knx="<(60)6/0/6"}
I already checked every single file in my configuration whether this items is somewhere else used ore referred to. But couldn’t find anything, it’s only used in my item file.
Any ideas how I can get rid of this message?