[SOLVED] ZWave Thing Initialisation problem

Setup, Configuration and Use Items & Sitemaps
, ,
1

Hi all,

I have the following problems with including my new shutter motor.

mobilus Tubular Motor EZRS M35 10/14

I know from github, that it was added to the zwave database in 03.2019.
(https://github.com/openhab/org.openhab.binding.zwave/blob/master/doc/mobilus/m35ezrs_0_0.md)

I am on:

Platform = Raspberry Pi 3 Model B Plus Rev 1.3
Release = Raspbian GNU/Linux 9 (stretch)
Kernel = Linux 4.14.34-v7+

openHAB 2.4.0-1 (Release Build)

I have added the file here:
https://1drv.ms/u/s!AlpMXib4Kd5zgqNpvDMUBYBcLhuq8g?e=lvgxZh

The node is : 25

It does not seem to finish the initialisation…

Thanks in advance for your help.

BR
Lars

2

This build is considerably older than when you say it was added to the binding, so the binding will not support it.

2.4 was released in December 2018.

3

Your device is also different to the one in the database. I will update this tomorrow so you will need to use the latest SNAPSHOT on Monday.

1 Like