I am coming from Domoticz. My hardware is a Raspberry Pi3 with a Razberry2 Zwave controller. My zwave devices are Neo Coolcam Motion Sensors, Neo Coolcam Sirens, Fibaro Smoke Detectors, and Heiman Smoke and Co2 detectors and Heiman Door sensors. When I set up OpenHab2.3 and configured my Razberry2…

Do you think there is something wrong with my installation? Its the 2.4 snapshot from Thursday. The zwave binding was uninstall and reinstalled last night. These are common devices that shouldn’t be giving problems. Thanks for any help

Hi Chris, This is the degug log for when I wake up a Neo Coolcam motion sensor; 2018-07-14 10:56:31.588 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 16 00 49 84 02 10 04 07 01 5E 86 72 5A 73 80 31 71 30 70 85 59 84 6F 2018-07-14 10:56:31.629 [DEBUG] [ve.internal.protocol…

What happens if you wake up the device? It looks like the binding is waiting for it to wake so that it can retrieve the manufacturer information. (ps. please use code fences, or format using the </> button so that the logs are nicely formatted :wink: .)

Hi Chris Can you tell me how the format rhe log. I don’t know how to code fence it and not sure how to use the </> button. I am seeing a lot of MISMATCH entries 2018-07-14 12:55:04.253 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Recv Message: class=Application…

[image] Scotsman: I don’t know how to code fence it and not sure how to use the </> button. Well, the </> button is super simple - just highlight the log, and click the </> button. [image] Scotsman: I am seeing a lot of MISMATCH entries This is not an error of any sort - it’s only a d…

[image] Scotsman: I don’t know how to code fence [image] How to use code fences Tutorials & Examples We all have to type this content over and over and over. Here is a posting we can all point to when the topic comes up. Why use code fences? Because rul…

This is what is output when I click the wake up button; ==> /var/log/openhab2/openhab.log <== 2018-07-14 15:15:13.448 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0F 00 04 00 02 09 71 05 00 00 00 FF 07 08 00 7B 2018-07-14 15:15:13.479 [DEBUG] [ve.internal.protocol.ZWaveC…

Day 3 Still all devices are listed as unknown. Here is what is logged when I wake up my Heiman smoke detector; 2018-07-16 18:03:29.602 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 04 03 80 03 58 2E 2018-07-16 18:03:29.632 [DEBUG] [ve.internal.protocol.ZWaveCo…

This section shows that initialisation is complete, but we don’t know what happened before hand. Please provide the full debug log from startup - not just short sections. The event log is irrelevant, so please don’t confuse things by also providing this.

Zwave with Razberry2 Unkown Device

Setup, Configuration and Use Installation

sihui (SiHui) July 14, 2018, 1:45pm 15