# \#aeotec **URL:** https://community.openhab.org/tag/aeotec/311.md [Latest](https://community.openhab.org/latest.md) · [Categories](https://community.openhab.org/categories.md) · [Tags](https://community.openhab.org/tags.md) --- ## [Aeotec Z-Stick Gen5 Backup/Restore and Firmware Update](https://community.openhab.org/t/aeotec-z-stick-gen5-backup-restore-and-firmware-update/165410)
**Author:** [@nh905](https://community.openhab.org/u/nh905)\ **Replies:** 0\ **Last updated:** [August 10, 2025, 8:49pm UTC](https://community.openhab.org/t/aeotec-z-stick-gen5-backup-restore-and-firmware-update/165410 "2025-08-10T20:49:17Z")
I bought an Aeotec Z-Stick Gen5 in 2022. I decided to purchase a ‘new’ Z-Stick Gen5 as a backup and to safely upgrade the firmware to v1.02. I found a lot of advice in various openHAB forums but some of the information… --- ## [Adding Old Z-wave BZMX1 to OH4 w aeotec z-stick 7 controller](https://community.openhab.org/t/adding-old-z-wave-bzmx1-to-oh4-w-aeotec-z-stick-7-controller/160290)
**Author:** [@Ashley\_Jones](https://community.openhab.org/u/Ashley_Jones)\ **Replies:** 6\ **Last updated:** [November 19, 2024, 12:38am UTC](https://community.openhab.org/t/adding-old-z-wave-bzmx1-to-oh4-w-aeotec-z-stick-7-controller/160290 "2024-11-19T00:38:12Z")
So, my Aeotec zstick controller 5 died on me last yesterday. I already had a 7 but had never used it. I figured this would be a good time to redo my openhab install and upgrade to openhab 4. I’m on a rpi5 and using… --- ## [No item updates from Aeotec MultiSensor 7](https://community.openhab.org/t/no-item-updates-from-aeotec-multisensor-7/160247)
**Author:** [@GeertClaes](https://community.openhab.org/u/GeertClaes)\ **Replies:** 2\ **Last updated:** [November 14, 2024, 9:34pm UTC](https://community.openhab.org/t/no-item-updates-from-aeotec-multisensor-7/160247 "2024-11-14T21:34:05Z")
Hi All, this is what I see in the zwave log. 2024-11-14 20:52:32.100 \[DEBUG\] \[WaveSerialHandler$ZWaveReceiveThread\] - Receive Message = 01 0A 00 04 00 07 04 30 03 FF 0C 32 2024-11-14 20:52:32.100 \[DEBUG\] \[nal.protocol… --- ## [I'm losing my mind - Aeotec Zigbee Communication Failure](https://community.openhab.org/t/im-losing-my-mind-aeotec-zigbee-communication-failure/157977)
**Author:** [@matticus](https://community.openhab.org/u/matticus)\ **Replies:** 17\ **Last updated:** [September 12, 2024, 5:49am UTC](https://community.openhab.org/t/im-losing-my-mind-aeotec-zigbee-communication-failure/157977 "2024-09-12T05:49:41Z")
Folks, I’m tinkering with a separate instance of OH, running 4.2.1. My ‘production’ version is 3.4, but I’m looking to get Zigbee up and running before I migrate and make the switch. I have an Aeotec Zigbee stick and … --- ## [Aeotec ZWAVE Trisensor - Setup Issues](https://community.openhab.org/t/aeotec-zwave-trisensor-setup-issues/155818)
**Author:** [@servoronine](https://community.openhab.org/u/servoronine)\ **Replies:** 10\ **Last updated:** [May 10, 2024, 8:52am UTC](https://community.openhab.org/t/aeotec-zwave-trisensor-setup-issues/155818 "2024-05-10T08:52:21Z")
Hi All, I have an Openhab installation (latest stable version) and use Aeotec ZWAVE stick to control my ZWAVE devices. So far I only had mains operated ZWAVE devices from Fibaro which operate flawlessly. I have however … --- ## [Z-Wave Unknown Device](https://community.openhab.org/t/z-wave-unknown-device/151914)
**Author:** [@kemotsysinc](https://community.openhab.org/u/kemotsysinc)\ **Replies:** 4\ **Last updated:** [December 11, 2023, 1:19pm UTC](https://community.openhab.org/t/z-wave-unknown-device/151914 "2023-12-11T13:19:06Z")
RPi with Aeotec Controller OH 4.04 I have two of the same outdoor zwave plugs. One connected fine and works with no issues. The other has remained as “Unknown Device” for a couple of days now. I’ve tried excluding a… --- ## [Aeotec SmartThings Multipurpose Sensor](https://community.openhab.org/t/aeotec-smartthings-multipurpose-sensor/149683)
**Author:** [@mjeshurun](https://community.openhab.org/u/mjeshurun)\ **Replies:** 0\ **Last updated:** [September 17, 2023, 9:50am UTC](https://community.openhab.org/t/aeotec-smartthings-multipurpose-sensor/149683 "2023-09-17T09:50:08Z")
Hi friends, Has anyone tried to use the Aeotec SmartThings Multipurpose Door/Window Sensor with OpenHAB? Are all Thing channels recognized by OpenHAB? Does it show the battery level state? https://www.amazon.com/Aeote… --- ## [Aeotec ZWA-009 unknown after upgrade to OpenHAB 4](https://community.openhab.org/t/aeotec-zwa-009-unknown-after-upgrade-to-openhab-4/148098)
**Author:** [@MaisOui](https://community.openhab.org/u/MaisOui)\ **Replies:** 10\ **Last updated:** [July 31, 2023, 6:23pm UTC](https://community.openhab.org/t/aeotec-zwa-009-unknown-after-upgrade-to-openhab-4/148098 "2023-07-31T18:23:07Z")
Hi, It’s been a long wait to get the Aeotec Tiny Sensor in the z-wave devices database (ZWA-009) and now after upgrade to OpenHAB 4, the device is again unknown. I got warnings in the log file : “Could not normalize con… --- ## [Zigbee Aeotec Zi-Stick, Zigbee Binding, ZVG1 Watervalve](https://community.openhab.org/t/zigbee-aeotec-zi-stick-zigbee-binding-zvg1-watervalve/147769)
**Author:** [@chess](https://community.openhab.org/u/chess)\ **Replies:** 10\ **Last updated:** [July 14, 2023, 7:02pm UTC](https://community.openhab.org/t/zigbee-aeotec-zi-stick-zigbee-binding-zvg1-watervalve/147769 "2023-07-14T19:02:09Z")
I use openhab with a pi for a will with zwave. I have a aoetec zi-Stick and a couple of sonoff Temperature sensors. Those work fine on the Zigbee Binding. Recently I bought a water valve to steer my garden watering. I bo… --- ## [Aeotec Z-wave stick on Synology/docker Goes offline every few days](https://community.openhab.org/t/aeotec-z-wave-stick-on-synology-docker-goes-offline-every-few-days/147299)
**Author:** [@Idolaat](https://community.openhab.org/u/Idolaat)\ **Replies:** 6\ **Last updated:** [June 20, 2023, 2:47pm UTC](https://community.openhab.org/t/aeotec-z-wave-stick-on-synology-docker-goes-offline-every-few-days/147299 "2023-06-20T14:47:51Z")
Hi, I,m running Openhab 3 in a docker container on Synology. I have an aeotec z-wave stick connected to the Synology. I Made the Synology run a script at startup to give docker Root Access to the serial ports. Synology … --- ## [Coolcam Neo PIR sensor does not show chanels](https://community.openhab.org/t/coolcam-neo-pir-sensor-does-not-show-chanels/141818)
**Author:** [@CodeNinja](https://community.openhab.org/u/CodeNinja)\ **Replies:** 14\ **Last updated:** [December 9, 2022, 7:10pm UTC](https://community.openhab.org/t/coolcam-neo-pir-sensor-does-not-show-chanels/141818 "2022-12-09T19:10:33Z")
Hi all, I’m new to OpenHab and using MiLight/MixBoxer and Coolcam things. All my MiLight/MiBoxer works fine out of the box. Also my Coolcam z-wave powerplug works directly and out of the box. Now i ordered a Neo Coolca… --- ## [OH not responding to WallMoteQuad input](https://community.openhab.org/t/oh-not-responding-to-wallmotequad-input/131811)
**Author:** [@loosenut](https://community.openhab.org/u/loosenut)\ **Replies:** 9\ **Last updated:** [October 3, 2022, 9:07pm UTC](https://community.openhab.org/t/oh-not-responding-to-wallmotequad-input/131811 "2022-10-03T21:07:24Z")
Hi, all. I got my Aeotec WallMoteQuad to connect to OpenHAB, but the Rules aren’t responding to input. Here’s one part of what is showing up in the debug log when I push (in this case) Button 3. NODE 7: Got a value ev… --- ## [Aeotec multisensor 6 and z-stick 5 NULL measurements](https://community.openhab.org/t/aeotec-multisensor-6-and-z-stick-5-null-measurements/133580)
**Author:** [@gpafit04](https://community.openhab.org/u/gpafit04)\ **Replies:** 1\ **Last updated:** [February 22, 2022, 2:39pm UTC](https://community.openhab.org/t/aeotec-multisensor-6-and-z-stick-5-null-measurements/133580 "2022-02-22T14:39:15Z")
Hi, I connect the aeotec z-stick 5 and multisensor 6 in the openhab 3 but when I am creating a semantic model I can’t get any measurements. All the measurements are NULL. Anyone with similar experience? --- ## [Reset My ZWave Controller and Now I Can't Add Devices](https://community.openhab.org/t/reset-my-zwave-controller-and-now-i-cant-add-devices/127781)
**Author:** [@km782](https://community.openhab.org/u/km782)\ **Replies:** 3\ **Last updated:** [October 23, 2021, 4:39pm UTC](https://community.openhab.org/t/reset-my-zwave-controller-and-now-i-cant-add-devices/127781 "2021-10-23T16:39:05Z")
I have a RPi 3 and a Aeotec Gen5 ZWave USB controller. I am running Openhabian with Openhab 3.1. The ZWave controller shows that it is online but when I click Scan and put any of my devices into discovery mode it never… --- ## [Aeotec Door/Window Sensor 7 - Binary Input channel stops updating](https://community.openhab.org/t/aeotec-door-window-sensor-7-binary-input-channel-stops-updating/124938)
**Author:** [@Levin1](https://community.openhab.org/u/Levin1)\ **Replies:** 6\ **Last updated:** [August 17, 2021, 8:19pm UTC](https://community.openhab.org/t/aeotec-door-window-sensor-7-binary-input-channel-stops-updating/124938 "2021-08-17T20:19:24Z")
Hi all I’m really struggling with two Aeotec Door/Window Sensor 7 (ZWA008) and it’s binary input. I’m on OH3.1 and using some other devices of Fibaro and Cyrus successfully. What works: Successfully included Able to… --- ## [Z-wave stick goes offline after sudo reboot from cron](https://community.openhab.org/t/z-wave-stick-goes-offline-after-sudo-reboot-from-cron/122321)
**Author:** [@quarku](https://community.openhab.org/u/quarku)\ **Replies:** 23\ **Last updated:** [July 22, 2021, 11:38am UTC](https://community.openhab.org/t/z-wave-stick-goes-offline-after-sudo-reboot-from-cron/122321 "2021-07-22T11:38:00Z")
Hello community, I have problem with z-wave stick in OH3. After each restart from cron (weekly) of after each karaf bundle restart - my one or even all three z-wave stick go offline. Recently I’ve Symlink a try in orde… --- ## [Aeotec ZW130 Wall Switch not saving configuration](https://community.openhab.org/t/aeotec-zw130-wall-switch-not-saving-configuration/121334)
**Author:** [@prokhor](https://community.openhab.org/u/prokhor)\ **Replies:** 6\ **Last updated:** [June 25, 2021, 7:02pm UTC](https://community.openhab.org/t/aeotec-zw130-wall-switch-not-saving-configuration/121334 "2021-06-25T19:02:13Z")
Hello, Recently added an Aeotec ZW130 Wall Switch. I included it successfully, and can operate a few lights via rules based on the Scene Number channel, but does not seem like the configuration saves to the wall switch … --- ## [Documentation for Zensys pc controller](https://community.openhab.org/t/documentation-for-zensys-pc-controller/102508)
**Author:** [@lorenzopt](https://community.openhab.org/u/lorenzopt)\ **Replies:** 1\ **Last updated:** [May 17, 2021, 4:51pm UTC](https://community.openhab.org/t/documentation-for-zensys-pc-controller/102508 "2021-05-17T16:51:00Z")
Does anyone know where I can find documentation for the Zensys zwave PC Controller? I used it to remove dead nodes, but I see there may be some options that might be fun to play with. (Using a backup controller). I’ve b… --- ## [Wallmote Quad - Hardwiring The Power To Run With No Battery](https://community.openhab.org/t/wallmote-quad-hardwiring-the-power-to-run-with-no-battery/113991)
**Author:** [@madmanmoon](https://community.openhab.org/u/madmanmoon)\ **Replies:** 3\ **Last updated:** [January 14, 2021, 8:25pm UTC](https://community.openhab.org/t/wallmote-quad-hardwiring-the-power-to-run-with-no-battery/113991 "2021-01-14T20:25:22Z")
Ello! I’m just putting this here on the absolute off chance that anyone else has some thoughts on the matter. Totally not asking with any entitlement to, or expection of, a reply. So I have a non-working WallMote, and … --- ## [Aeotec TriSensor added but no events, now not recognized](https://community.openhab.org/t/aeotec-trisensor-added-but-no-events-now-not-recognized/109795)
**Author:** [@mistyCardinal](https://community.openhab.org/u/mistyCardinal)\ **Replies:** 0\ **Last updated:** [December 9, 2020, 3:01am UTC](https://community.openhab.org/t/aeotec-trisensor-added-but-no-events-now-not-recognized/109795 "2020-12-09T03:01:59Z")
device: Aeotec TriSensor, Z-Wave Plus S2 Motion, Temperature, Light Sensor, 3-in 1 The current version of this device is ZWA005-A (can it be that being a revision “A” means it is too different?). My openHAB is 2.5.2. W… --- ## [Help Needed | How can I display battery and temperature status for Aeon Labs Garage Door Controller Gen5 (ZW062)](https://community.openhab.org/t/help-needed-how-can-i-display-battery-and-temperature-status-for-aeon-labs-garage-door-controller-gen5-zw062/105960)
**Author:** [@Lukie](https://community.openhab.org/u/Lukie)\ **Replies:** 20\ **Last updated:** [November 24, 2020, 9:51am UTC](https://community.openhab.org/t/help-needed-how-can-i-display-battery-and-temperature-status-for-aeon-labs-garage-door-controller-gen5-zw062/105960 "2020-11-24T09:51:54Z")
I have the Aeotec garage door opener (ZW062). It comes with a battery-powered tilt sensor and it appears that it has the ability to report via parameter 42 the state of the battery: 1, Value=0x00: battery power is nomin… --- ## [NanoMoteQuad buttons dont work and Battery does not report](https://community.openhab.org/t/nanomotequad-buttons-dont-work-and-battery-does-not-report/101208)
**Author:** [@ed.hab1](https://community.openhab.org/u/ed.hab1)\ **Replies:** 7\ **Last updated:** [November 6, 2020, 2:17pm UTC](https://community.openhab.org/t/nanomotequad-buttons-dont-work-and-battery-does-not-report/101208 "2020-11-06T14:17:04Z")
Platform information: Hardware: Pi 4 OS: Raspbian GNU/Linux 10 (buster) from openhabian-pi-raspbian image Java Runtime Environment: OpenJDK Runtime Environment (Zulu 8.46.0.225-CA-linux\_aarch32hf) (build 1.8.… --- ## [Aeotec Wallmote](https://community.openhab.org/t/aeotec-wallmote/47777)
**Author:** [@fkhm](https://community.openhab.org/u/fkhm)\ **Replies:** 25\ **Last updated:** [September 29, 2020, 1:12pm UTC](https://community.openhab.org/t/aeotec-wallmote/47777 "2020-09-29T13:12:50Z")
Platform information: Hardware: Raspberry Pi 3 OS: Openhabian 1.41 Java Runtime Environment: Zulu openHAB version: 2.3 I’ve set up my Openhabian with a Razberry2 module and a RFXTRX433e. Switching the Z-Wave Fibaro … --- ## [Aeotec TriSensor (ZWA005) motion not working](https://community.openhab.org/t/aeotec-trisensor-zwa005-motion-not-working/79150)
**Author:** [@Jacob\_Weigand](https://community.openhab.org/u/Jacob_Weigand)\ **Replies:** 29\ **Last updated:** [August 22, 2020, 3:13am UTC](https://community.openhab.org/t/aeotec-trisensor-zwa005-motion-not-working/79150 "2020-08-22T03:13:27Z")
Item: Aeotec TriSensor, Z-Wave Plus S2 Motion, Temperature, Light Sensor, 3-in 1 I have successfully paired this device with Openhab. The temperature, luminance, and battery level work perfectly. Openhab doesn’t like th… --- ## [NanoMote Quad and multifunction](https://community.openhab.org/t/nanomote-quad-and-multifunction/102949)
**Author:** [@lorenzopt](https://community.openhab.org/u/lorenzopt)\ **Replies:** 4\ **Last updated:** [July 28, 2020, 9:07pm UTC](https://community.openhab.org/t/nanomote-quad-and-multifunction/102949 "2020-07-28T21:07:56Z")
I just wanted to verify that the NanoMote Quad does not support multilevel function. long presses don’t send a scene and this page seems to confirm that only single presses on the buttons are supported. NanoMote Quad I… --- ## [2.5.3 Z-wave - thing receives a command, mostly does it, then goes offline](https://community.openhab.org/t/2-5-3-z-wave-thing-receives-a-command-mostly-does-it-then-goes-offline/101261)
**Author:** [@psyciknz](https://community.openhab.org/u/psyciknz)\ **Replies:** 27\ **Last updated:** [July 7, 2020, 12:00am UTC](https://community.openhab.org/t/2-5-3-z-wave-thing-receives-a-command-mostly-does-it-then-goes-offline/101261 "2020-07-07T00:00:54Z")
So I have a couple of aeotec smart switches… As the crow flies one is about 3m from the controller, another maybe 5. They both seem to maintain a direct connection to the controller. But it seems after sending a com… --- ## [New Aeotec z-stick Gen 5 for RPi4](https://community.openhab.org/t/new-aeotec-z-stick-gen-5-for-rpi4/101691)
**Author:** [@Magnus](https://community.openhab.org/u/Magnus)\ **Replies:** 2\ **Last updated:** [July 2, 2020, 11:56am UTC](https://community.openhab.org/t/new-aeotec-z-stick-gen-5-for-rpi4/101691 "2020-07-02T11:56:28Z")
Aeotec has released a new z-stick that can be directly plugged into RPi4. From mail to me from Aeotec: "The new Z-Stick Gen5 that can be directly plugged into RPi4 is now available here: https://popp.to/collections/all … --- ## [Zwave node - weird neighbours](https://community.openhab.org/t/zwave-node-weird-neighbours/100474)
**Author:** [@psyciknz](https://community.openhab.org/u/psyciknz)\ **Replies:** 2\ **Last updated:** [June 15, 2020, 10:32pm UTC](https://community.openhab.org/t/zwave-node-weird-neighbours/100474 "2020-06-15T22:32:45Z")
I can’t figure out why this node 6: Would not be able to set the controller node as a neighbour. Even though, they’re about 1.5m from each other. Where Are probable the distance away. If measuring in a straight… --- ## [\[SOLVED\] Aeotec Multisensor 6 for motion-sensitive lights](https://community.openhab.org/t/solved-aeotec-multisensor-6-for-motion-sensitive-lights/61779)
**Author:** [@davecpayne](https://community.openhab.org/u/davecpayne)\ **Replies:** 14\ **Last updated:** [February 4, 2020, 7:20am UTC](https://community.openhab.org/t/solved-aeotec-multisensor-6-for-motion-sensitive-lights/61779 "2020-02-04T07:20:46Z")
Platform information: Hardware: Raspberry Pi 3 OS: Raspbian Java Runtime Environment: which java platform is used and what version openHAB version: 2.4.0 I’ve recently set up an Aeotec Multisensor 6 on battery power… --- ## [Cannot set custom position to Aeotec Nano Shutter](https://community.openhab.org/t/cannot-set-custom-position-to-aeotec-nano-shutter/80850)
**Author:** [@Tazintosh](https://community.openhab.org/u/Tazintosh)\ **Replies:** 61\ **Last updated:** [November 17, 2019, 11:07pm UTC](https://community.openhab.org/t/cannot-set-custom-position-to-aeotec-nano-shutter/80850 "2019-11-17T23:07:05Z")
Hi folks, Sorry if this post may sounds as a duplicate, I’ve followed up on an existing topic about this issue, but since it’s old, I wonder if it’s still followed. I’ve bought an Aeotec Nano Shutter a few days ago and… [Next page](https://community.openhab.org/tag/aeotec/311.md?match_all_tags=true&page=1&tags%5B%5D=aeotec)