# \#shelly1 **URL:** https://community.openhab.org/tag/shelly1/2266.md [Latest](https://community.openhab.org/latest.md) · [Categories](https://community.openhab.org/categories.md) · [Tags](https://community.openhab.org/tags.md) --- ## [\[SOLVED\] Shelly1 wiring with 2-way switching (hotel switch)](https://community.openhab.org/t/solved-shelly1-wiring-with-2-way-switching-hotel-switch/77534)
**Author:** [@Stehof](https://community.openhab.org/u/Stehof)\ **Replies:** 39\ **Last updated:** [January 27, 2023, 11:06am UTC](https://community.openhab.org/t/solved-shelly1-wiring-with-2-way-switching-hotel-switch/77534 "2023-01-27T11:06:03Z")
Hi, I couldn’t really find a good schema how to wire a 2-way switch to a shelly1. Who can help me out? This is a real easy overview how to wire a single switch: This is my lamp on the 1st floor: This is my swi… --- ## [Button type for garage door?](https://community.openhab.org/t/button-type-for-garage-door/143625)
**Author:** [@lionel\_rigaux](https://community.openhab.org/u/lionel_rigaux)\ **Replies:** 10\ **Last updated:** [January 21, 2023, 11:28pm UTC](https://community.openhab.org/t/button-type-for-garage-door/143625 "2023-01-21T23:28:18Z")
Hi, I was wondering if there is a better solution than mine for my garage door.. I setup a shelly one in parralel to the dry contact switch on the wall. I tried all possibilities under “Button Type” but each tyoe I cl… --- ## [Shelly1 sensors#temperature1 -NaN](https://community.openhab.org/t/shelly1-sensors-temperature1-nan/103258)
**Author:** [@Schwabix](https://community.openhab.org/u/Schwabix)\ **Replies:** 3\ **Last updated:** [January 14, 2023, 1:47pm UTC](https://community.openhab.org/t/shelly1-sensors-temperature1-nan/103258 "2023-01-14T13:47:53Z")
Hello, After reading the thread “Shelly Binding” for hours (!) I have two concerns: A HUGE THANK YOU to Markus7017 for your unbelievable amount of work and patience that you put into this binding! I got several sh… --- ## [Installing Shelly Binding on openHab 2.5](https://community.openhab.org/t/installing-shelly-binding-on-openhab-2-5/131818)
**Author:** [@houch841](https://community.openhab.org/u/houch841)\ **Replies:** 1\ **Last updated:** [January 14, 2022, 9:19pm UTC](https://community.openhab.org/t/installing-shelly-binding-on-openhab-2-5/131818 "2022-01-14T21:19:01Z")
Hello, I am running openHab 2.5 on a Raspberry Pi 3. When I try to install the Shelly binding I get the following weird error message: \[ERROR\] \[core.karaf.internal.FeatureInstaller\] - Failed installing ‘openhab-bindin… --- ## [Shelly 1 Add On -\> Reed](https://community.openhab.org/t/shelly-1-add-on-reed/120765)
**Author:** [@shorty707](https://community.openhab.org/u/shorty707)\ **Replies:** 47\ **Last updated:** [January 14, 2022, 6:14pm UTC](https://community.openhab.org/t/shelly-1-add-on-reed/120765 "2022-01-14T18:14:03Z")
hi quick question about the shelly binding. the External Addon (call Temperature Addon) can also be used to get the state of a reed contact. see wiring scheme 3 here: https://www.shelly-support.eu/lexikon/index.php?en… --- ## [Shelly Binding - External Sensors](https://community.openhab.org/t/shelly-binding-external-sensors/127799)
**Author:** [@Spiwi](https://community.openhab.org/u/Spiwi)\ **Replies:** 3\ **Last updated:** [October 28, 2021, 12:57pm UTC](https://community.openhab.org/t/shelly-binding-external-sensors/127799 "2021-10-28T12:57:17Z")
Hi developers and community, is it possible to add a new channel for Shelly 1 to get the state of external sensor. I’ve a temparatue-addon with a reed-switch to get my doorposition. xxx.xxx.xxx.xxx/status: … “ext\_swit… --- ## [Shelly: from MQTT to shelly binding, refresh takes too long in sitemap](https://community.openhab.org/t/shelly-from-mqtt-to-shelly-binding-refresh-takes-too-long-in-sitemap/94873)
**Author:** [@tasosmich](https://community.openhab.org/u/tasosmich)\ **Replies:** 20\ **Last updated:** [September 22, 2020, 6:56pm UTC](https://community.openhab.org/t/shelly-from-mqtt-to-shelly-binding-refresh-takes-too-long-in-sitemap/94873 "2020-09-22T18:56:43Z")
Hello, i am using openhab 2.5.3-1, and i just installed the shelly binding v2.5.3. Until now i used mqtt to control a light with a shelly1 device (which worked fine for a year now). My new thing file: Thing shelly:sh… --- ## [Shelly 1 - Control natural gas boiler](https://community.openhab.org/t/shelly-1-control-natural-gas-boiler/102641)
**Author:** [@ESOUAS](https://community.openhab.org/u/ESOUAS)\ **Replies:** 6\ **Last updated:** [July 30, 2020, 8:45am UTC](https://community.openhab.org/t/shelly-1-control-natural-gas-boiler/102641 "2020-07-30T08:45:23Z")
Hi,hello all, this is my very first post. I bought the shelly 1 together with the H&T with the goal to control my boiler (ROCA Victoria 20/20F) but after many hours searching I’m not able to perform the correct wiring. … --- ## [Missing Availability of "Buttom" of Shelly1 in PAPERUI using shelly binding 2.5.5](https://community.openhab.org/t/missing-availability-of-buttom-of-shelly1-in-paperui-using-shelly-binding-2-5-5/101094)
**Author:** [@sjheinz](https://community.openhab.org/u/sjheinz)\ **Replies:** 5\ **Last updated:** [June 23, 2020, 7:53pm UTC](https://community.openhab.org/t/missing-availability-of-buttom-of-shelly1-in-paperui-using-shelly-binding-2-5-5/101094 "2020-06-23T19:53:42Z")
Dear all, after installing Shelly Binding (v2.5.5) i add my shelly1, which was discovered by paperui, the “Buttom mode” is not available - see pic (Using German language this is “Taste” - third entry) What can i do … --- ## [Shelly1-PM power item doesn't update in sitemap](https://community.openhab.org/t/shelly1-pm-power-item-doesnt-update-in-sitemap/100493)
**Author:** [@hermann59](https://community.openhab.org/u/hermann59)\ **Replies:** 1\ **Last updated:** [June 11, 2020, 11:13am UTC](https://community.openhab.org/t/shelly1-pm-power-item-doesnt-update-in-sitemap/100493 "2020-06-11T11:13:03Z")
When switching off a shelly1-PM it correctly updates channel meter#currentWatts but the corresponding text item dosn’t update the value in the sitemap: 2020-06-11 12:53:02.738 \[ome.event.ItemCommandEvent\] - Item 'Shelly… --- ## [\[Solved\] Shelly1 Longpush: MQTT vs Shelly Binding](https://community.openhab.org/t/solved-shelly1-longpush-mqtt-vs-shelly-binding/96306)
**Author:** [@Trickx](https://community.openhab.org/u/Trickx)\ **Replies:** 2\ **Last updated:** [April 25, 2020, 5:55pm UTC](https://community.openhab.org/t/solved-shelly1-longpush-mqtt-vs-shelly-binding/96306 "2020-04-25T17:55:24Z")
Is it true that Shelly1 do not support a “longpush” via the Shelly binding? Via MQTT it does. I tried to include a Shelly1 via Shelly1PM without success regarding longpress. However, I don’t see the technical reason f… --- ## [Thing: Shelly via MQTT](https://community.openhab.org/t/thing-shelly-via-mqtt/80071)
**Author:** [@denkteich](https://community.openhab.org/u/denkteich)\ **Replies:** 38\ **Last updated:** [August 25, 2019, 6:18am UTC](https://community.openhab.org/t/thing-shelly-via-mqtt/80071 "2019-08-25T06:18:19Z")
Hi, I have a problem getting my shelly1 to work. I created a thing via PaperUI: I created an items file without he following content: Switch ShellyBuero "Büro-Licht" {mqtt="\>\[ShellyBuero:shellies/shelly1-5548C3/… --- ## [Shelly1 PM Wiring is weird](https://community.openhab.org/t/shelly1-pm-wiring-is-weird/78631)
**Author:** [@Feronimus\_Sol](https://community.openhab.org/u/Feronimus_Sol)\ **Replies:** 1\ **Last updated:** [July 25, 2019, 12:07am UTC](https://community.openhab.org/t/shelly1-pm-wiring-is-weird/78631 "2019-07-25T00:07:44Z")
I just bought a new Shelly1 PM. Have’t wire it yet becouse i have heard that if you wire it backwards it might explode. I opened it up just to check things up and what i found is rather peculiar. The Two L lines (L and… --- ## [Confused about wiring shelly 1](https://community.openhab.org/t/confused-about-wiring-shelly-1/77226)
**Author:** [@wfsteadman](https://community.openhab.org/u/wfsteadman)\ **Replies:** 4\ **Last updated:** [July 5, 2019, 7:27pm UTC](https://community.openhab.org/t/confused-about-wiring-shelly-1/77226 "2019-07-05T19:27:17Z")
\*greetings folks, I am running openhab v2.2 on a Raspberry Pi 3 and trying to connect a light for testing shelly1 device When I have the shelly1 connect to live and neutral on the power cord and I plug it in and then te… --- ## [\[SOLVED\] Shelly 1, alternative to Sonoff](https://community.openhab.org/t/solved-shelly-1-alternative-to-sonoff/50993)
**Author:** [@r27](https://community.openhab.org/u/r27)\ **Replies:** 58\ **Last updated:** [June 4, 2019, 6:41pm UTC](https://community.openhab.org/t/solved-shelly-1-alternative-to-sonoff/50993 "2019-06-04T18:41:15Z")
Check this out https://www.youtube.com/watch?v=J20hxfUTP9I&t=607s I bought 2, and deployed one of them yesterday. Using stock firmware with disabled cloud feature and very happy with result. Ordered Shelly 2 to test.