# \#xbee **URL:** https://community.openhab.org/tag/xbee/738.md [Latest](https://community.openhab.org/latest.md) · [Categories](https://community.openhab.org/categories.md) · [Tags](https://community.openhab.org/tags.md) --- ## [\[SOLVED\] Failed to initialize Zigbee transport layer \[Xbee S2C\]](https://community.openhab.org/t/solved-failed-to-initialize-zigbee-transport-layer-xbee-s2c/134037)
**Author:** [@Mehdi\_Marzougui](https://community.openhab.org/u/Mehdi_Marzougui)\ **Replies:** 7\ **Last updated:** [March 9, 2022, 9:11am UTC](https://community.openhab.org/t/solved-failed-to-initialize-zigbee-transport-layer-xbee-s2c/134037 "2022-03-09T09:11:16Z")
I am using an S2C XBee radio, so far I could not use the zigbee binding properly to connect it to the openhab server, the state of the thing(Xbee coordinator) keeps toggeling betwenn unknown and offline. In the log it k… --- ## [Can't install xbee palette on node-red](https://community.openhab.org/t/cant-install-xbee-palette-on-node-red/124132)
**Author:** [@mogmog](https://community.openhab.org/u/mogmog)\ **Replies:** 2\ **Last updated:** [July 1, 2021, 9:50am UTC](https://community.openhab.org/t/cant-install-xbee-palette-on-node-red/124132 "2021-07-01T09:50:36Z")
Has anyone installed XBee palette on node-red? Xbee palette It run normally on raspbian OS. But got error when running on openHABian. I am running openhabian (openHAB 3.1.0) on Raspberry Pi 3B. This is the error log wh… --- ## [Xbee with dht22](https://community.openhab.org/t/xbee-with-dht22/102884)
**Author:** [@fabrizio\_bianchi](https://community.openhab.org/u/fabrizio_bianchi)\ **Replies:** 12\ **Last updated:** [April 27, 2021, 11:01pm UTC](https://community.openhab.org/t/xbee-with-dht22/102884 "2021-04-27T23:01:50Z")
Hello. I have installed on my raspberry openhabian and i would like read dht22 temp sensor through xbee. How i can install diyxbee? Thanks --- ## [Zigbee Smartthings multipurpose sensor integration](https://community.openhab.org/t/zigbee-smartthings-multipurpose-sensor-integration/86394)
**Author:** [@jinujosefrancis](https://community.openhab.org/u/jinujosefrancis)\ **Replies:** 10\ **Last updated:** [August 4, 2020, 12:19am UTC](https://community.openhab.org/t/zigbee-smartthings-multipurpose-sensor-integration/86394 "2020-08-04T00:19:25Z")
Why smartthings multipurpose sensor can sense only door-window open or not? It is not sensing vibration or temperature changes. The packet I got from the sensor for open and close is added below. Open case: Explicit… --- ## [Xbee S2C - zigbee hardware install](https://community.openhab.org/t/xbee-s2c-zigbee-hardware-install/98194)
**Author:** [@Maligen](https://community.openhab.org/u/Maligen)\ **Replies:** 19\ **Last updated:** [May 29, 2020, 3:14pm UTC](https://community.openhab.org/t/xbee-s2c-zigbee-hardware-install/98194 "2020-05-29T15:14:47Z")
Dear Community, Are there anyone out there with succesfull installation of Xbee S2C to Raspberry 4, Openhabian system? I’m using this USB adapter, and Xbee radio: What I’ve already tried: manual installation of zi… --- ## [Zigbee - XBee - Coordinator stuck on UNKNOWN](https://community.openhab.org/t/zigbee-xbee-coordinator-stuck-on-unknown/62596)
**Author:** [@M\_Kaufmann](https://community.openhab.org/u/M_Kaufmann)\ **Replies:** 28\ **Last updated:** [October 11, 2019, 5:32pm UTC](https://community.openhab.org/t/zigbee-xbee-coordinator-stuck-on-unknown/62596 "2019-10-11T17:32:47Z")
First of all thank you to all people helping out the community. I’ve been “working” with openHAB since a year and only now stumbled on a problem that I could not fix with the answers already in the forum. That being sai… --- ## [XBee S2B](https://community.openhab.org/t/xbee-s2b/61121)
**Author:** [@sverzijl](https://community.openhab.org/u/sverzijl)\ **Replies:** 13\ **Last updated:** [August 2, 2019, 11:03am UTC](https://community.openhab.org/t/xbee-s2b/61121 "2019-08-02T11:03:03Z")
Hi, I’m new to all this and have started to do some experimentation. I had an XBee S2B module from an old project. I noticed in the bindings that S2C is supported but no mention of S2B. I know one of the key differences… --- ## [How to join XBee3 to a Zigbee network managed by a Nortek HUSBZB-1 dongle](https://community.openhab.org/t/how-to-join-xbee3-to-a-zigbee-network-managed-by-a-nortek-husbzb-1-dongle/70378)
**Author:** [@rigareau](https://community.openhab.org/u/rigareau)\ **Replies:** 1\ **Last updated:** [March 25, 2019, 8:51pm UTC](https://community.openhab.org/t/how-to-join-xbee3-to-a-zigbee-network-managed-by-a-nortek-husbzb-1-dongle/70378 "2019-03-25T20:51:51Z")
Hi everyone, Just a quick note to try and help anyone that is planning to use some XBee3 on a Zigbee network that is handled by a Nortek HUSBZB-1 usb stick. Here is how I’m configured. Docker image openhab/openhab:sna… --- ## [64 bit source address of Xiaomi's Aqara Zigbee sensors changed to FF FF FF FF FF FF FF FF](https://community.openhab.org/t/64-bit-source-address-of-xiaomis-aqara-zigbee-sensors-changed-to-ff-ff-ff-ff-ff-ff-ff-ff/68814)
**Author:** [@jinujosefrancis](https://community.openhab.org/u/jinujosefrancis)\ **Replies:** 0\ **Last updated:** [February 26, 2019, 7:12am UTC](https://community.openhab.org/t/64-bit-source-address-of-xiaomis-aqara-zigbee-sensors-changed-to-ff-ff-ff-ff-ff-ff-ff-ff/68814 "2019-02-26T07:12:55Z")
I have one coordinator, router and few xioami zigbee sensor devices.The Aqara sensor’s parent is router and data is received at the coordinator via this router. Initially 64 bit source address in the data received from … --- ## [Help with zigbee Zen Thermostat connectivity](https://community.openhab.org/t/help-with-zigbee-zen-thermostat-connectivity/12665)
**Author:** [@headly](https://community.openhab.org/u/headly)\ **Replies:** 4\ **Last updated:** [December 23, 2018, 3:24pm UTC](https://community.openhab.org/t/help-with-zigbee-zen-thermostat-connectivity/12665 "2018-12-23T15:24:54Z")
So looking for some guidance, I have a number (2) Zen Thermostats (zenthermostat.com) currently connected through to a SwannOne smart hub, however I need to get rid this thing because it is a piece of rubbish. I have set… --- ## [DIYOnXBee (oh1-addon) binding does not generate event for incoming packet on OpenHab2](https://community.openhab.org/t/diyonxbee-oh1-addon-binding-does-not-generate-event-for-incoming-packet-on-openhab2/24230)
**Author:** [@Kiran\_Patil](https://community.openhab.org/u/Kiran_Patil)\ **Replies:** 10\ **Last updated:** [March 9, 2017, 9:01am UTC](https://community.openhab.org/t/diyonxbee-oh1-addon-binding-does-not-generate-event-for-incoming-packet-on-openhab2/24230 "2017-03-09T09:01:31Z")
Hi, We installed DIYOnXBee binding on OH2 as below and it is sending packet to END DEVICE as configured in items.cfg file but when we send a packet from END DEVICE it is not getting received at OH2 Event Bus, since we c… --- ## [New binding for home made hardware](https://community.openhab.org/t/new-binding-for-home-made-hardware/2264)
**Author:** [@juergen\_richtsfeld](https://community.openhab.org/u/juergen_richtsfeld)\ **Replies:** 54\ **Last updated:** [March 1, 2017, 2:20pm UTC](https://community.openhab.org/t/new-binding-for-home-made-hardware/2264 "2017-03-01T14:20:03Z")
Hi there, recently I was creating a new binding called DiyOnXBee which I’m using for several weeks now. The idea was to create sensors/actors by myself and integrate it to my existing openhab installation. I decided to… --- ## [\[OH2\] MQTT bindig - Select value from JSON string](https://community.openhab.org/t/oh2-mqtt-bindig-select-value-from-json-string/19723)
**Author:** [@Roberto\_Santini](https://community.openhab.org/u/Roberto_Santini)\ **Replies:** 4\ **Last updated:** [January 21, 2017, 9:36am UTC](https://community.openhab.org/t/oh2-mqtt-bindig-select-value-from-json-string/19723 "2017-01-21T09:36:09Z")
Hi! I’m very new to openHAB. I have set up MQTT binding; from my Mosquitto server, I receive: ab123/XBEE\_A/response: {"type":146,"remote64":"0013a20040f635d0","remote16":"fffe","receiveOptions":193,"digitalSamples":{"…