# Modify your openHABian settings # Handle with care, only touch if you need to!! # This file will only be used on unattended initial install. # If you want to change anything after unattended install completed, use menu in openhabian-config. # Hostname to set this one to hostname=openHAB3 # if it exists, the default user (with its working environment) will be renamed to this username given here ... username=openhabian # ... and given this password. The password will be removed from this file after completion for security reasons. userpw=xxxxx # set this to download a SSH key and authorize the owner to login as the admin user #adminkeyurl=https://github.com/openhab/openhabian/adminkey.pub # Language and timezone. See Debian documentation for valid values. timezone=Europe/Berlin locales="en_US.UTF-8 de_DE.UTF-8" system_default_locale="en_US.UTF-8" # WiFi settings. An ethernet connection is recommended. # If you have a RPi4, RPi3, RPi0W or a supported external WiFi dongle, the WiFi # interface can be setup and used for the initial installation. # Fill in your SSID and password below, leave empty or put comment in front to # have your WiFi remain unchanged/uninitialized. Make sure your Ethernet works. # ATTENTION: you need to escape these special characters: $, `, ", \, (newline) # 'Escaping' means to put an additional \ in front of that character wifi_ssid="" wifi_psk="" # Wi-Fi setting. Select a two-letter country code suitable for your location # E.g. US (default), DE, AU, NZ... # You may infringe on local legislature otherwise # See https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 or /usr/share/zoneinfo/zone.tab wifi_country="" # Eventually disable all IPv6 e.g. on installation problems # values: "enable", "disable" ipv6=enable # repo to clone from (if not master for build and test) repositoryurl=https://github.com/openhab/openhabian clonebranch=openHAB3 # debug verbosity mode # off, on (verbose output in log) or maximum (show every command) debugmode=maximum # fake hardware # force treating your box as if it was a ... # pi4, pi4_8gb, cm4, pi400, pi3, cm3, pi3+, cm3+, pi2, pi1, cm1, pi0, pi0w #hw=pi4 # Hardware architecture # x86_64, amd64, armv6l, armv7l, aarch64, arm64 #hwarch=armv7l # OS Release # ubuntu, raspbian, debian # stretch, buster # bionic, focal #release=buster # Java architecture mode # Valid arguments: "Adopt11", "Zulu8-32", "Zulu8-64", "Zulu11-32", or "Zulu11-64" # Only change cached_java_opt at image build time or things might go wrong. cached_java_opt=Zulu8-32 java_opt=Zulu11-32 # install ZRAM per default, set to "disable" to skip installation #zraminstall=enable # start comitup hotspot if internet is not reachable hotspot=enable # external SD card device to backup and mirror the internal SD card to #backupdrive=/dev/sda #storageconfig=openhab-dir #storagedir=/storage #storagetapes=15 #storagecapacity=1024 # mail relay settings #adminmail=john.doe@foo.bar #relayuser=john.doe@foo.bar #relaypass=secret #smarthost=smtp.gmail.com #smartport=587 # Tailscale VPN #preauthkey=tskey-xxxxxxxxxxxxxxxxx # vim: filetype=sh