2020-01-01 14:49:46.505 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 71: Node advancer: Initialisation starting
2020-01-01 14:49:46.589 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@177fe58
2020-01-01 14:49:46.589 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.608 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.608 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1b2c59d
2020-01-01 14:49:46.609 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.609 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.553 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_SCENE_ACTUATOR_CONF, endpoint 0 created
2020-01-01 14:49:46.610 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.610 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.611 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.611 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:46.553 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_DEVICE_RESET_LOCALLY, endpoint 0 created
2020-01-01 14:49:46.613 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 0 created
2020-01-01 14:49:46.613 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.614 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.614 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.614 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.558 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.615 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.615 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.560 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.567 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.616 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.616 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.616 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.613 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.617 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.617 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.618 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.572 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 51: Node advancer: Initialisation starting
2020-01-01 14:49:46.569 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 63: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.619 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.619 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1946fb5
2020-01-01 14:49:46.535 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.522 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.620 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.620 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.621 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.621 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.570 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 5: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.622 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SENSOR_ALARM, endpoint 1 created
2020-01-01 14:49:46.622 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.619 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.623 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 1 created
2020-01-01 14:49:46.623 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.623 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.570 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3631 to queue - size 7
2020-01-01 14:49:46.624 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:46.624 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:46.625 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:46.534 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_FIRMWARE_UPDATE_MD, endpoint 0 created
2020-01-01 14:49:46.626 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:46.627 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.627 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.530 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.628 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_DEVICE_RESET_LOCALLY, endpoint 0 created
2020-01-01 14:49:46.628 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.531 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:46.629 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 0 created
2020-01-01 14:49:46.629 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:46.630 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:46.631 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.631 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:46.632 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:46.532 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 75: Device discovery completed
2020-01-01 14:49:46.634 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.635 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 75: Device discovery resolved to thingType zwave:aeon_zw117_00_000
2020-01-01 14:49:46.635 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:46.533 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.637 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_DEVICE_RESET_LOCALLY, endpoint 0 created
2020-01-01 14:49:46.637 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.638 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 0 created
2020-01-01 14:49:46.639 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.641 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.641 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 75: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.642 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.643 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.644 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.645 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.533 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.647 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.647 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.648 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.648 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.649 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.649 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.650 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.650 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.632 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.627 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:46.621 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.622 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 5: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:46.626 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.577 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.656 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.618 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.657 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 75: Init node thread finished
2020-01-01 14:49:46.616 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.614 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.655 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.658 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.655 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.655 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:46.654 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.561 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.660 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.661 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.653 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.662 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.652 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.663 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.665 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.615 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.557 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.653 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.653 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.652 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.667 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.663 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.661 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.668 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.661 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.660 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.669 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.669 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_CENTRAL_SCENE, endpoint 0 created
2020-01-01 14:49:46.669 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_METER, endpoint 2 created
2020-01-01 14:49:46.659 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 75: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.670 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.658 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_DEVICE_RESET_LOCALLY, endpoint 0 created
2020-01-01 14:49:46.680 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.657 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.681 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.683 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.609 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.679 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0 created
2020-01-01 14:49:46.608 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.684 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.599 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 0 created
2020-01-01 14:49:46.600 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 73: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.600 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.599 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.600 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 44: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.686 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.610 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.670 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.670 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_SENSOR_ALARM, endpoint 2 created
2020-01-01 14:49:46.610 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.689 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:46.681 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SCENE_ACTUATOR_CONF, endpoint 0 created
2020-01-01 14:49:46.680 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.671 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 75: Node advancer: Initialisation starting
2020-01-01 14:49:46.668 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.669 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.690 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 0 created
2020-01-01 14:49:46.690 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.668 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.668 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.691 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.692 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.692 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.692 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.692 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.693 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.694 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 22: Updated networkKey
2020-01-01 14:49:46.694 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.694 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 22: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.695 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.661 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.691 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.696 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.691 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.697 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 38: Updated networkKey
2020-01-01 14:49:46.697 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.690 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1db7256
2020-01-01 14:49:46.690 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:46.688 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 44: Node advancer: Initialisation starting
2020-01-01 14:49:46.698 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 38: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.699 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@f68d42
2020-01-01 14:49:46.699 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:46.684 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.686 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.687 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.687 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 73: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 0 created
2020-01-01 14:49:46.686 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.701 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.660 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.660 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3632 to queue - size 8
2020-01-01 14:49:46.657 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0 created
2020-01-01 14:49:46.651 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SENSOR_ALARM, endpoint 2 created
2020-01-01 14:49:46.657 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_FIRMWARE_UPDATE_MD, endpoint 0 created
2020-01-01 14:49:46.656 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.656 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.700 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.704 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_CENTRAL_SCENE, endpoint 0 created
2020-01-01 14:49:46.704 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:46.705 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_DEVICE_RESET_LOCALLY, endpoint 0 created
2020-01-01 14:49:46.702 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.702 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.706 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.707 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.705 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 5: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:46.704 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 2 created
2020-01-01 14:49:46.697 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.708 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.708 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 5: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:46.709 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_TIME, endpoint 0 created
2020-01-01 14:49:46.709 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.703 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.656 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.705 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.710 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 0 created
2020-01-01 14:49:46.710 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:46.656 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.711 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 0 created
2020-01-01 14:49:46.711 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 20: Updated networkKey
2020-01-01 14:49:46.712 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.712 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.712 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.713 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.659 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.702 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.701 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 73: Device discovery completed
2020-01-01 14:49:46.681 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 66: Updated networkKey
2020-01-01 14:49:46.713 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.714 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.714 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 0 created
2020-01-01 14:49:46.715 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.715 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.715 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 12: Updated networkKey
2020-01-01 14:49:46.653 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:46.707 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.707 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.716 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 48: Device discovery completed
2020-01-01 14:49:46.717 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_METER_PULSE, endpoint 0 created
2020-01-01 14:49:46.717 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.684 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 65: Device discovery completed
2020-01-01 14:49:46.687 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.688 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.719 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:46.719 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.719 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.720 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:46.720 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 0 created
2020-01-01 14:49:46.706 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.706 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.721 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.722 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.723 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_CENTRAL_SCENE, endpoint 0 created
2020-01-01 14:49:46.724 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 48: Device discovery resolved to thingType zwave:fibaro_fgbs001_00_000
2020-01-01 14:49:46.724 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.725 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0 created
2020-01-01 14:49:46.726 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.727 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.727 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.728 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.728 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.667 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.692 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.691 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 0 created
2020-01-01 14:49:46.691 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.671 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.669 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.688 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.720 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.697 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.717 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.734 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.735 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 49: Updated networkKey
2020-01-01 14:49:46.736 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.713 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.718 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.710 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.710 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.737 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.738 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.738 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.739 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 49: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.740 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.741 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.684 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.742 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.743 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.734 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.715 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 73: Device discovery resolved to thingType zwave:aeon_zw117_00_000
2020-01-01 14:49:46.744 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.715 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.733 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 0 created
2020-01-01 14:49:46.733 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 62: Updated networkKey
2020-01-01 14:49:46.733 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.747 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.747 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_FIRMWARE_UPDATE_MD, endpoint 0 created
2020-01-01 14:49:46.733 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.749 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.732 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.732 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.731 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.712 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3636 to queue - size 9
2020-01-01 14:49:46.712 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 1 created
2020-01-01 14:49:46.707 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 28: Updated networkKey
2020-01-01 14:49:46.731 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.731 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 48: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.731 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.751 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.754 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:46.755 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.732 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.756 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_FIRMWARE_UPDATE_MD, endpoint 0 created
2020-01-01 14:49:46.730 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.749 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0 created
2020-01-01 14:49:46.757 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 0 created
2020-01-01 14:49:46.758 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.759 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.759 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.760 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_SCENE_CONTROLLER_CONF, endpoint 0 created
2020-01-01 14:49:46.760 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_ASSOCIATION, endpoint 0 created
2020-01-01 14:49:46.761 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.762 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 21: Updated networkKey
2020-01-01 14:49:46.763 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 21: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.733 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_METER_PULSE, endpoint 2 created
2020-01-01 14:49:46.734 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.721 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.721 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:46.761 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.767 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.767 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 0 created
2020-01-01 14:49:46.715 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.715 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 66: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.766 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.753 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 28: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.752 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3624: Transaction COMPLETED
2020-01-01 14:49:46.751 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.717 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 12: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.771 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.771 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 73: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.721 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 65: Device discovery resolved to thingType zwave:tkb_tz69_00_000
2020-01-01 14:49:46.746 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.773 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.772 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.771 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 48: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.753 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.742 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 78: Device discovery completed
2020-01-01 14:49:46.856 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.857 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 65: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.858 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 41: Updated networkKey
2020-01-01 14:49:46.858 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 41: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.859 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 78: Device discovery resolved to thingType zwave:tkb_tz69_00_000
2020-01-01 14:49:46.738 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.860 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.861 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.862 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_METER_PULSE, endpoint 0 created
2020-01-01 14:49:46.864 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.865 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.756 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.756 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 42: Updated networkKey
2020-01-01 14:49:46.769 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.761 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.768 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_DEVICE_RESET_LOCALLY, endpoint 0 created
2020-01-01 14:49:46.855 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 73: Init node thread finished
2020-01-01 14:49:46.721 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.721 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.730 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.757 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 48: Init node thread finished
2020-01-01 14:49:46.756 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3635 to queue - size 10
2020-01-01 14:49:46.878 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.879 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.853 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 48: Node advancer: Initialisation starting
2020-01-01 14:49:46.879 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.880 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 65: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.880 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:46.752 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 20: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.773 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.881 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.881 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.771 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.874 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 0 created
2020-01-01 14:49:46.882 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.874 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.883 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.884 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.884 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.884 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.885 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_METER_PULSE, endpoint 1 created
2020-01-01 14:49:46.885 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.768 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.768 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.767 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 2 created
2020-01-01 14:49:46.887 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.885 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 1 created
2020-01-01 14:49:46.882 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.773 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.774 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.882 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.882 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.888 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.889 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 50: Updated networkKey
2020-01-01 14:49:46.868 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 78: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.890 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:46.890 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 50: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.880 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.881 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 65: Node advancer: Initialisation starting
2020-01-01 14:49:46.891 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_METER, endpoint 2 created
2020-01-01 14:49:46.868 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.868 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.757 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 73: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.878 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.893 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 78: Init node thread finished
2020-01-01 14:49:46.873 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.873 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:46.893 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 73: Node advancer: Initialisation starting
2020-01-01 14:49:46.867 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 65: Init node thread finished
2020-01-01 14:49:46.894 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.741 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.738 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_BASIC_WINDOW_COVERING, endpoint 0 created
2020-01-01 14:49:46.747 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.889 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@5b53d9
2020-01-01 14:49:46.889 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.904 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.905 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.906 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.747 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.774 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.743 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.743 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.744 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.907 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.888 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.908 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.888 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.906 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.910 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.892 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 78: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.887 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 2 created
2020-01-01 14:49:46.911 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.911 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.912 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 2 created
2020-01-01 14:49:46.908 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.873 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.873 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 0 created
2020-01-01 14:49:46.738 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.907 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.914 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.893 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.915 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.915 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.868 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.879 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.878 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.916 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.917 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.917 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.918 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.918 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0 created
2020-01-01 14:49:46.919 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.900 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 42: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.920 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.921 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.894 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1d597c6
2020-01-01 14:49:46.922 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.922 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.923 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.890 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.924 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.894 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.894 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.768 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 62: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.925 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.926 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.926 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.883 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.924 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.769 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 76: Device discovery completed
2020-01-01 14:49:46.927 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SWITCH_TOGGLE_BINARY, endpoint 0 created
2020-01-01 14:49:46.927 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.924 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@b131fa
2020-01-01 14:49:46.924 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.924 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.921 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 11: Device discovery completed
2020-01-01 14:49:46.916 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.929 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_CENTRAL_SCENE, endpoint 0 created
2020-01-01 14:49:46.930 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.931 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.931 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.931 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.767 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.932 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.933 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:46.933 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 0 created
2020-01-01 14:49:46.915 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.914 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.934 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:46.934 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.934 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.935 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.913 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.919 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.915 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3634 to queue - size 11
2020-01-01 14:49:46.937 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.906 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.905 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_BATTERY, endpoint 1 created
2020-01-01 14:49:46.907 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.907 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.909 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.913 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.939 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:46.912 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 78: Node advancer: Initialisation starting
2020-01-01 14:49:46.939 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 80: Updated networkKey
2020-01-01 14:49:46.940 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.911 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.910 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.938 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.941 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.936 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 11: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:46.942 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.935 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.942 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 46: Device discovery completed
2020-01-01 14:49:46.888 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:46.937 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.940 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 80: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.909 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.945 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.938 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.939 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.912 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.939 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.913 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.937 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:46.936 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.934 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.934 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.950 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.933 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.933 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.951 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.932 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.930 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:46.935 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:46.952 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.952 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ALARM, endpoint 0 created
2020-01-01 14:49:46.929 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 76: Device discovery resolved to thingType zwave:aeon_zw117_00_000
2020-01-01 14:49:46.928 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.927 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.925 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.925 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.954 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 11: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.954 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.951 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.949 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.955 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.955 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.917 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.957 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.957 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.958 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.958 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 1 created
2020-01-01 14:49:46.949 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 7: Updated networkKey
2020-01-01 14:49:46.959 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:46.948 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.947 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.960 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_VERSION, endpoint 0 created
2020-01-01 14:49:46.945 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.954 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.952 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:46.954 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.954 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 47: Device discovery completed
2020-01-01 14:49:46.961 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.962 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 11: Init node thread finished
2020-01-01 14:49:46.962 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.952 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.952 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 2 created
2020-01-01 14:49:46.951 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.973 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.973 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:46.969 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.950 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3633 to queue - size 12
2020-01-01 14:49:46.950 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.950 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.974 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:46.944 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:46.973 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 11: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.935 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.975 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.909 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.977 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.975 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.974 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:46.973 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 64: Updated networkKey
2020-01-01 14:49:46.975 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.978 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.978 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:46.979 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 64: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.979 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:46.977 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 35: Updated networkKey
2020-01-01 14:49:46.980 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.981 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.970 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 76: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.981 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:46.977 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.981 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:46.982 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 37: Updated networkKey
2020-01-01 14:49:46.982 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.983 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 37: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.955 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:46.984 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.982 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.985 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 76: Init node thread finished
2020-01-01 14:49:46.985 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.960 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.960 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:46.969 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 8: Updated networkKey
2020-01-01 14:49:46.994 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 8: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.994 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:46.970 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:46.995 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.940 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 69: Updated networkKey
2020-01-01 14:49:46.997 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.997 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.940 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1e8b22f
2020-01-01 14:49:46.997 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 69: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.998 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.999 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.000 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.000 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.001 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.001 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:46.941 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.944 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:47.002 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.002 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:47.002 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.003 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.003 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:46.962 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.005 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:47.005 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.947 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.960 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.006 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:47.006 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:46.959 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 7: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.007 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:47.008 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.008 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 47: Device discovery resolved to thingType zwave:fibaro_fgbs001_00_000
2020-01-01 14:49:47.008 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 27: Updated networkKey
2020-01-01 14:49:46.948 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:47.009 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:47.009 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.010 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.010 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.010 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0 created
2020-01-01 14:49:47.012 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.012 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.010 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 27: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.013 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:47.014 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.015 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.015 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.005 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.945 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 46: Device discovery resolved to thingType zwave:fibaro_fgbs001_00_000
2020-01-01 14:49:46.962 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.018 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.021 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.021 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.022 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.024 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.025 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.025 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.003 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 76: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:46.970 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:47.027 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.027 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:46.943 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:46.942 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.028 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:47.028 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.029 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.029 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 25: Device discovery completed
2020-01-01 14:49:47.029 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:46.997 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:47.030 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:47.030 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 9: Updated networkKey
2020-01-01 14:49:47.031 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.031 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:46.995 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3639 to queue - size 13
2020-01-01 14:49:46.994 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 70: Updated networkKey
2020-01-01 14:49:46.985 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.984 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SCENE_ACTIVATION, endpoint 0 created
2020-01-01 14:49:47.035 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.035 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_CONFIGURATION, endpoint 0 created
2020-01-01 14:49:46.979 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:46.979 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 70: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:46.979 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:47.036 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.036 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 39: Updated networkKey
2020-01-01 14:49:47.033 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.038 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.038 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.038 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.032 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.040 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.040 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:47.041 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0 created
2020-01-01 14:49:47.041 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:46.980 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 35: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.042 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.043 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:47.043 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.045 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:47.045 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 47: Starting initialisation from EMPTYNODE
2020-01-01 14:49:46.975 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.046 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 67: Updated networkKey
2020-01-01 14:49:47.047 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.048 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 67: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.049 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.050 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.050 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 46: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.051 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.051 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 47: Init node thread finished
2020-01-01 14:49:47.052 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.052 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 47: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.053 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 46: Init node thread finished
2020-01-01 14:49:47.054 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.054 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 47: Node advancer: Initialisation starting
2020-01-01 14:49:47.042 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:46.979 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 11: Node advancer: Initialisation starting
2020-01-01 14:49:47.041 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.040 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.038 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.039 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.039 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.057 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.059 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.059 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.060 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.060 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.060 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.061 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.061 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.033 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_SCENE_CONTROLLER_CONF, endpoint 2 created
2020-01-01 14:49:47.030 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.064 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:47.065 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.065 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 39: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.065 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.066 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.064 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:47.067 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.067 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.027 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 76: Node advancer: Initialisation starting
2020-01-01 14:49:47.068 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.068 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@17e6901
2020-01-01 14:49:47.028 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.069 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.064 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.070 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.019 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.071 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.018 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.006 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.062 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_METER, endpoint 0 created
2020-01-01 14:49:47.073 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.074 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:47.074 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.075 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:47.075 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:47.062 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.075 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.076 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.076 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.071 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.077 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.077 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.077 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.072 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.063 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.063 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.079 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.079 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.076 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.072 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.080 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:47.080 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.081 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.081 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:47.082 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.082 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 26: Updated networkKey
2020-01-01 14:49:47.018 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.018 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 0 created
2020-01-01 14:49:47.070 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.069 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.068 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 25: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.084 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.085 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.066 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.065 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 9: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.087 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.087 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.088 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.089 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.089 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.089 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.089 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.056 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3638 to queue - size 14
2020-01-01 14:49:47.090 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.090 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.091 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.091 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.091 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.092 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3637 to queue - size 15
2020-01-01 14:49:47.093 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.093 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.094 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.094 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 1243ms
2020-01-01 14:49:47.095 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.096 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.096 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.094 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.097 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 25: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.097 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.098 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.098 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3641 to queue - size 16
2020-01-01 14:49:47.100 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 25: Init node thread finished
2020-01-01 14:49:47.057 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@139073e
2020-01-01 14:49:47.056 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.055 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 46: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.102 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.102 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 2 created
2020-01-01 14:49:47.102 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 46: Node advancer: Initialisation starting
2020-01-01 14:49:47.103 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.103 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.104 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@690bc3
2020-01-01 14:49:47.104 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.105 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1bdbba4
2020-01-01 14:49:47.051 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:46.978 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.106 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 25: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.107 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.107 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.106 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.108 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 25: Node advancer: Initialisation starting
2020-01-01 14:49:47.108 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.100 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:47.100 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3640 to queue - size 17
2020-01-01 14:49:47.110 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.112 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.112 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3624: Transaction completed
2020-01-01 14:49:47.113 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.091 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 22: Device discovery completed
2020-01-01 14:49:47.114 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.089 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.112 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:47.086 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.117 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 22: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.117 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.067 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:47.118 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.118 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:47.083 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 52: Device discovery completed
2020-01-01 14:49:47.055 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.119 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 26: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.121 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.122 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.122 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 52: Device discovery resolved to thingType zwave:tkb_tz69_00_000
2020-01-01 14:49:47.122 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.123 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.124 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:47.124 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.121 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.125 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.125 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:47.079 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.127 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 0 created
2020-01-01 14:49:47.127 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.128 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.129 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.129 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.069 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_PROTECTION, endpoint 0 created
2020-01-01 14:49:47.075 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.119 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.133 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.133 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.135 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.135 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.136 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 1 created
2020-01-01 14:49:47.137 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.137 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:47.138 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.139 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.139 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.139 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.141 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:47.141 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_BASIC_WINDOW_COVERING, endpoint 0 created
2020-01-01 14:49:47.133 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 52: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.142 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 40: Updated networkKey
2020-01-01 14:49:47.142 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.142 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:47.143 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.143 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 40: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.133 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 41: Device discovery completed
2020-01-01 14:49:47.144 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:47.144 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.120 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.118 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.118 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 10: Updated networkKey
2020-01-01 14:49:47.117 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.134 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.117 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.116 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.115 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.148 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.148 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.149 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.149 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.149 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.113 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 02 B8 
2020-01-01 14:49:47.150 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.150 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3624 DONE
2020-01-01 14:49:47.151 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:47.151 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.151 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 10: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.152 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 41: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.152 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.153 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.154 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.155 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.155 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.111 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:47.157 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.157 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.156 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.158 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.159 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.161 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.161 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 1 created
2020-01-01 14:49:47.161 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 41: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.161 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.162 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.159 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.157 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:47.162 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1e54f9c
2020-01-01 14:49:47.140 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.108 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.111 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.151 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 21: Device discovery completed
2020-01-01 14:49:47.150 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 02 B8 
2020-01-01 14:49:47.113 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.148 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.169 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.169 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.169 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.170 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.170 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.170 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.171 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 8: Device discovery completed
2020-01-01 14:49:47.171 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:47.135 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 0 created
2020-01-01 14:49:47.142 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_METER_PULSE, endpoint 2 created
2020-01-01 14:49:47.173 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 1 created
2020-01-01 14:49:47.173 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 2 created
2020-01-01 14:49:47.174 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.174 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 8: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.142 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.164 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.178 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.179 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 2 created
2020-01-01 14:49:47.169 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 22: Init node thread finished
2020-01-01 14:49:47.172 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.181 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 64: Device discovery completed
2020-01-01 14:49:47.182 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 0 created
2020-01-01 14:49:47.183 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 42: Device discovery completed
2020-01-01 14:49:47.167 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 21: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.156 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.184 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.167 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.183 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 8: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.177 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.177 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 0 created
2020-01-01 14:49:47.188 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.176 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.176 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 1 created
2020-01-01 14:49:47.187 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 42: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.170 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.190 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 52: Init node thread finished
2020-01-01 14:49:47.167 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:47.191 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.164 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:47.171 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3624: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.163 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.192 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:47.170 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.193 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:47.162 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.192 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@5a6622
2020-01-01 14:49:47.191 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3625: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.194 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.194 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.189 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.195 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.196 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:47.197 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.189 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:47.198 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.198 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.199 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.199 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.167 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.188 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.191 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 52: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.191 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 64: Device discovery resolved to thingType zwave:fibaro_fgs213_00_000
2020-01-01 14:49:47.189 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.173 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 12: Device discovery completed
2020-01-01 14:49:47.177 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.178 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 2 created
2020-01-01 14:49:47.203 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_DOOR_LOCK, endpoint 0 created
2020-01-01 14:49:47.204 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 63: Device discovery completed
2020-01-01 14:49:47.205 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 12: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.179 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.185 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.165 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.165 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.208 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.184 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.208 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.202 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.175 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 1 created
2020-01-01 14:49:47.209 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.210 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.210 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.190 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Node advancer: Initialisation starting
2020-01-01 14:49:47.210 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.211 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@d84808
2020-01-01 14:49:47.211 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 2 created
2020-01-01 14:49:47.200 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 80: Device discovery completed
2020-01-01 14:49:47.200 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.212 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.213 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.215 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.185 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 38: Device discovery completed
2020-01-01 14:49:47.216 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.217 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 42: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.220 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.220 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.202 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.221 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.222 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.222 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.188 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.224 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 0 created
2020-01-01 14:49:47.223 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 41: Init node thread finished
2020-01-01 14:49:47.216 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 80: Device discovery resolved to thingType zwave:fibaro_fgs213_00_000
2020-01-01 14:49:47.196 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:47.196 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 28: Device discovery completed
2020-01-01 14:49:47.228 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 63: Device discovery resolved to thingType zwave:fibaro_fgs223_00_000
2020-01-01 14:49:47.229 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 41: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.231 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 28: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.233 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 41: Node advancer: Initialisation starting
2020-01-01 14:49:47.200 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.194 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:47.193 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.197 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.197 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.199 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_METER, endpoint 2 created
2020-01-01 14:49:47.227 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.236 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node advancer - advancing to PING
2020-01-01 14:49:47.237 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.225 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SECURITY, endpoint 0 created
2020-01-01 14:49:47.238 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 49: Device discovery completed
2020-01-01 14:49:47.239 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.240 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.219 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 0 created
2020-01-01 14:49:47.242 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 8: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.243 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 37: Device discovery completed
2020-01-01 14:49:47.243 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 2 created
2020-01-01 14:49:47.243 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 49: Device discovery resolved to thingType zwave:fibaro_fgs213_00_000
2020-01-01 14:49:47.241 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.241 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 8: Node advancer: Initialisation starting
2020-01-01 14:49:47.241 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 8: Init node thread finished
2020-01-01 14:49:47.238 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 68: Updated networkKey
2020-01-01 14:49:47.245 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.245 [DEBUG] [mmandclass.ZWaveSecurityCommandClass] - NODE 68: setupNetworkKey useSchemeZero=false
2020-01-01 14:49:47.246 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.247 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.247 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.248 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.248 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.249 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_METER_PULSE, endpoint 1 created
2020-01-01 14:49:47.250 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.250 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.251 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.251 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 37: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.223 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.252 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.219 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 38: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.211 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3645 to queue - size 17
2020-01-01 14:49:47.253 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.212 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.255 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.256 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.256 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.257 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.257 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3625: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.257 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 64: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.258 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:47.210 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.211 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 1 created
2020-01-01 14:49:47.260 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.244 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SWITCH_ALL, endpoint 2 created
2020-01-01 14:49:47.261 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.199 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 21: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.262 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.260 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3643 to queue - size 18
2020-01-01 14:49:47.218 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 7: Device discovery completed
2020-01-01 14:49:47.221 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.248 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_MULTI_CHANNEL, endpoint 0 created
2020-01-01 14:49:47.263 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1b71339
2020-01-01 14:49:47.237 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 5: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:47.237 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.225 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 1 created
2020-01-01 14:49:47.252 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 52: Node advancer: Initialisation starting
2020-01-01 14:49:47.264 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 2 created
2020-01-01 14:49:47.238 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 27: Device discovery completed
2020-01-01 14:49:47.238 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:47.270 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:47.271 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:47.272 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 27: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.272 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:47.274 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:47.275 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 66: Device discovery completed
2020-01-01 14:49:47.240 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 50: Device discovery completed
2020-01-01 14:49:47.277 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.251 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.259 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.279 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 50: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.268 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.280 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 49: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.266 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.266 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.267 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:47.278 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 42: Init node thread finished
2020-01-01 14:49:47.281 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 42: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.268 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 38: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.278 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 12: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.283 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 42: Node advancer: Initialisation starting
2020-01-01 14:49:47.283 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.284 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.284 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.284 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@679a09
2020-01-01 14:49:47.283 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.285 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3644 to queue - size 19
2020-01-01 14:49:47.286 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.286 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 66: Device discovery resolved to thingType zwave:fibaro_fgd212_03_005
2020-01-01 14:49:47.287 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.288 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.287 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.289 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.285 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 0 created
2020-01-01 14:49:47.290 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.291 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 39: Device discovery completed
2020-01-01 14:49:47.291 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.292 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 7: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.293 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.289 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.295 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.295 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 21: Init node thread finished
2020-01-01 14:49:47.295 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.288 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.297 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.297 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.288 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_DOOR_LOCK, endpoint 0 created
2020-01-01 14:49:47.287 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:47.298 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.298 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 0 created
2020-01-01 14:49:47.299 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:47.299 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_MANUFACTURER_SPECIFIC, endpoint 0 created
2020-01-01 14:49:47.300 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3625: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.299 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 80: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.300 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_CRC_16_ENCAP, endpoint 0 created
2020-01-01 14:49:47.301 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0 created
2020-01-01 14:49:47.297 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 39: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.297 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 21: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.304 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 7: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.304 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 21: Node advancer: Initialisation starting
2020-01-01 14:49:47.304 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_POWERLEVEL, endpoint 0 created
2020-01-01 14:49:47.299 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 26: Device discovery completed
2020-01-01 14:49:47.305 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@5b0578
2020-01-01 14:49:47.307 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ALARM, endpoint 1 created
2020-01-01 14:49:47.308 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.309 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_BASIC, endpoint 1 created
2020-01-01 14:49:47.309 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.309 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 12: Init node thread finished
2020-01-01 14:49:47.310 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.308 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 26: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.311 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.312 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.313 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.305 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 70: Device discovery completed
2020-01-01 14:49:47.315 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.316 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.317 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 49: Init node thread finished
2020-01-01 14:49:47.318 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.317 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 70: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.311 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 12: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.319 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.320 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.321 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 35: Device discovery completed
2020-01-01 14:49:47.322 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 49: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.323 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 37: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.324 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 7: Init node thread finished
2020-01-01 14:49:47.325 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_7_init complete
2020-01-01 14:49:47.268 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.327 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_8_init
2020-01-01 14:49:47.327 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 28: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.319 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 12: Node advancer: Initialisation starting
2020-01-01 14:49:47.301 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 69: Device discovery completed
2020-01-01 14:49:47.318 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.328 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.317 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 50: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.330 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.309 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1f2d139
2020-01-01 14:49:47.330 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@ec00fe
2020-01-01 14:49:47.331 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3642 to queue - size 20
2020-01-01 14:49:47.332 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.306 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: SECURITY doesn't encrypt PING
2020-01-01 14:49:47.326 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 7: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.333 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.333 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:47.323 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 49: Node advancer: Initialisation starting
2020-01-01 14:49:47.310 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_METER, endpoint 1 created
2020-01-01 14:49:47.335 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.336 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.335 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@35938c
2020-01-01 14:49:47.337 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@158ff4d
2020-01-01 14:49:47.337 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.337 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.338 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 63: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.338 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.316 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.308 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 27: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.328 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_8_init complete
2020-01-01 14:49:47.329 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.329 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1b84624
2020-01-01 14:49:47.341 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.328 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SCENE_CONTROLLER_CONF, endpoint 2 created
2020-01-01 14:49:47.319 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_9_init
2020-01-01 14:49:47.319 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.342 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.343 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.344 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_CONTROLLER_REPLICATION, endpoint 2 created
2020-01-01 14:49:47.344 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 7: Node advancer: Initialisation starting
2020-01-01 14:49:47.345 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.345 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@996840
2020-01-01 14:49:47.341 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.347 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.347 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.348 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 37: Init node thread finished
2020-01-01 14:49:47.349 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:47.349 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 39: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.350 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3625: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.347 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 69: Device discovery resolved to thingType zwave:fibaro_fgd212_03_005
2020-01-01 14:49:47.351 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:47.352 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: ProtocolInfo
2020-01-01 14:49:47.353 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Listening = true
2020-01-01 14:49:47.354 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Routing   = true
2020-01-01 14:49:47.340 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 35: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.336 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ASSOCIATION, endpoint 1 created
2020-01-01 14:49:47.357 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.357 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.358 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 9: Device discovery completed
2020-01-01 14:49:47.358 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 70: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.346 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_METER_PULSE, endpoint 2 created
2020-01-01 14:49:47.359 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 10: Device discovery completed
2020-01-01 14:49:47.360 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.353 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3646 to queue - size 21
2020-01-01 14:49:47.361 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.362 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 10: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.362 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SWITCH_COLOR, endpoint 2 created
2020-01-01 14:49:47.363 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3647 to queue - size 22
2020-01-01 14:49:47.363 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 2 created
2020-01-01 14:49:47.364 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_DOOR_LOCK, endpoint 0 created
2020-01-01 14:49:47.365 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 62: Device discovery completed
2020-01-01 14:49:47.365 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.368 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 9: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.368 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_APPLICATION_STATUS, endpoint 1 created
2020-01-01 14:49:47.346 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 37: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.358 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 26: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.363 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.347 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.356 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Beaming   = true
2020-01-01 14:49:47.370 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 40: Device discovery completed
2020-01-01 14:49:47.370 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Version   = 4
2020-01-01 14:49:47.372 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 66: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.374 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 40: Device discovery resolved to thingType zwave:fibaro_fgd212_00_000
2020-01-01 14:49:47.374 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 37: Node advancer: Initialisation starting
2020-01-01 14:49:47.375 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1941cbc
2020-01-01 14:49:47.375 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.377 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_SWITCH_BINARY, endpoint 2 created
2020-01-01 14:49:47.378 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 20: Device discovery completed
2020-01-01 14:49:47.379 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 62: Device discovery resolved to thingType zwave:fibaro_fgs223_00_000
2020-01-01 14:49:47.380 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.381 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 67: Device discovery completed
2020-01-01 14:49:47.383 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 20: Device discovery resolved to thingType zwave:fibaro_fgs213_00_000
2020-01-01 14:49:47.385 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 1 created
2020-01-01 14:49:47.385 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3648 to queue - size 23
2020-01-01 14:49:47.386 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_VERSION, endpoint 1 created
2020-01-01 14:49:47.386 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.387 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 1 created
2020-01-01 14:49:47.387 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 67: Device discovery resolved to thingType zwave:fibaro_fgd212_03_005
2020-01-01 14:49:47.388 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 1 created
2020-01-01 14:49:47.372 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: FLIRS     = false
2020-01-01 14:49:47.389 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SENSOR_BINARY, endpoint 1 created
2020-01-01 14:49:47.390 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Security  = false
2020-01-01 14:49:47.391 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 35: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.388 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Adding to device queue
2020-01-01 14:49:47.394 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Added 3649 to queue - size 1
2020-01-01 14:49:47.394 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ZWAVEPLUS_INFO, endpoint 2 created
2020-01-01 14:49:47.395 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.395 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 2 created
2020-01-01 14:49:47.396 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 10: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.396 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_VERSION, endpoint 2 created
2020-01-01 14:49:47.391 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Max Baud  = 40000
2020-01-01 14:49:47.397 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_BASIC, endpoint 2 created
2020-01-01 14:49:47.398 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:47.398 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ASSOCIATION_GRP_INFO, endpoint 2 created
2020-01-01 14:49:47.399 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:47.399 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.400 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 2: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:47.400 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_ASSOCIATION, endpoint 2 created
2020-01-01 14:49:47.401 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 2: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:47.402 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3650 to queue - size 24
2020-01-01 14:49:47.402 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 2: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.403 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.403 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 2: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:47.405 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 68: Device discovery completed
2020-01-01 14:49:47.405 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 2: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:47.404 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 69: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.405 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3651 to queue - size 25
2020-01-01 14:49:47.405 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 64: Init node thread finished
2020-01-01 14:49:47.406 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.407 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 2: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:47.408 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 2: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:47.409 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 2: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:47.410 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3625: Transaction COMPLETED
2020-01-01 14:49:47.410 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 68: Device discovery resolved to thingType zwave:fibaro_fgd212_03_005
2020-01-01 14:49:47.411 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 220ms
2020-01-01 14:49:47.412 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 67: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.414 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 80: Init node thread finished
2020-01-01 14:49:47.414 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 80: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.415 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 80: Node advancer: Initialisation starting
2020-01-01 14:49:47.416 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 64: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.416 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@67bfdf
2020-01-01 14:49:47.418 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 64: Node advancer: Initialisation starting
2020-01-01 14:49:47.419 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 20: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.417 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3652 to queue - size 26
2020-01-01 14:49:47.428 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 28: Init node thread finished
2020-01-01 14:49:47.428 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 69: Init node thread finished
2020-01-01 14:49:47.430 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.427 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 67: Init node thread finished
2020-01-01 14:49:47.427 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 20: Init node thread finished
2020-01-01 14:49:47.412 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3625: Transaction completed
2020-01-01 14:49:47.419 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1c47056
2020-01-01 14:49:47.435 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3625 DONE
2020-01-01 14:49:47.436 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 67: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.436 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 10: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.437 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 69: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.437 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 10: Node advancer: Initialisation starting
2020-01-01 14:49:47.438 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@f2e178
2020-01-01 14:49:47.438 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 69: Node advancer: Initialisation starting
2020-01-01 14:49:47.439 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 50: Init node thread finished
2020-01-01 14:49:47.440 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 50: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.440 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 50: Node advancer: Initialisation starting
2020-01-01 14:49:47.440 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 67: Node advancer: Initialisation starting
2020-01-01 14:49:47.441 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 38: Init node thread finished
2020-01-01 14:49:47.441 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 38: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.442 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 68: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.434 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 28: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.442 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 38: Node advancer: Initialisation starting
2020-01-01 14:49:47.434 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 40: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.443 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 28: Node advancer: Initialisation starting
2020-01-01 14:49:47.425 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 62: Starting initialisation from EMPTYNODE
2020-01-01 14:49:47.432 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 10: Init node thread finished
2020-01-01 14:49:47.431 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.444 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1cd04f9
2020-01-01 14:49:47.444 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@920297
2020-01-01 14:49:47.430 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 20: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.445 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 03 B9 
2020-01-01 14:49:47.446 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 20: Node advancer: Initialisation starting
2020-01-01 14:49:47.447 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@2f2cea
2020-01-01 14:49:47.447 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 03 B9 
2020-01-01 14:49:47.447 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@4ae914
2020-01-01 14:49:47.448 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@15b43b6
2020-01-01 14:49:47.449 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1d1e565
2020-01-01 14:49:47.449 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:47.450 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.449 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 63: Init node thread finished
2020-01-01 14:49:47.451 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.451 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 63: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.451 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3626: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.452 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 63: Node advancer: Initialisation starting
2020-01-01 14:49:47.453 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3655 to queue - size 26
2020-01-01 14:49:47.453 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 21 01 DC 
2020-01-01 14:49:47.454 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.454 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 70: Init node thread finished
2020-01-01 14:49:47.456 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 27: Init node thread finished
2020-01-01 14:49:47.456 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3654 to queue - size 27
2020-01-01 14:49:47.456 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 27: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.457 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.457 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 21 01 
2020-01-01 14:49:47.453 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@6b96a4
2020-01-01 14:49:47.458 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 27: Node advancer: Initialisation starting
2020-01-01 14:49:47.459 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3653 to queue - size 28
2020-01-01 14:49:47.459 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 70: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.460 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.460 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 70: Node advancer: Initialisation starting
2020-01-01 14:49:47.460 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@f05b2a
2020-01-01 14:49:47.461 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1ab3b4d
2020-01-01 14:49:47.461 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 39: Init node thread finished
2020-01-01 14:49:47.461 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3657 to queue - size 29
2020-01-01 14:49:47.462 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.463 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 26: Init node thread finished
2020-01-01 14:49:47.463 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 66: Init node thread finished
2020-01-01 14:49:47.464 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 26: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.465 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3656 to queue - size 30
2020-01-01 14:49:47.464 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 39: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.465 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 26: Node advancer: Initialisation starting
2020-01-01 14:49:47.465 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.467 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 66: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.468 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3658 to queue - size 31
2020-01-01 14:49:47.469 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 66: Node advancer: Initialisation starting
2020-01-01 14:49:47.470 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.471 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@165394d
2020-01-01 14:49:47.471 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 39: Node advancer: Initialisation starting
2020-01-01 14:49:47.472 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1f0ba88
2020-01-01 14:49:47.474 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3659 to queue - size 32
2020-01-01 14:49:47.473 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1b330c6
2020-01-01 14:49:47.475 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.476 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 35: Init node thread finished
2020-01-01 14:49:47.477 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.477 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3625: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.477 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3660 to queue - size 33
2020-01-01 14:49:47.478 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.478 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3626: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.479 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 2: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@f6375b
2020-01-01 14:49:47.479 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:47.480 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 2: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:47.480 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3661 to queue - size 34
2020-01-01 14:49:47.480 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 21 01 
2020-01-01 14:49:47.481 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.481 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 2: Node advancer - advancing to PING
2020-01-01 14:49:47.481 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3626: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.482 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 2: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:47.482 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 35: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.483 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 2: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:47.483 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 35: Node advancer: Initialisation starting
2020-01-01 14:49:47.484 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 2: SECURITY not supported
2020-01-01 14:49:47.484 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3662 to queue - size 35
2020-01-01 14:49:47.484 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@8063ef
2020-01-01 14:49:47.484 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 2: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:47.485 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1f4b5a1
2020-01-01 14:49:47.485 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.486 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 9: Init node thread finished
2020-01-01 14:49:47.487 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_9_init complete
2020-01-01 14:49:47.487 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.488 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Node advancer: Initialisation starting
2020-01-01 14:49:47.488 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_10_init
2020-01-01 14:49:47.489 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_10_init complete
2020-01-01 14:49:47.489 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3664 to queue - size 36
2020-01-01 14:49:47.490 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@14f9532
2020-01-01 14:49:47.490 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_11_init
2020-01-01 14:49:47.490 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.492 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 40: Init node thread finished
2020-01-01 14:49:47.492 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:47.492 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 62: Init node thread finished
2020-01-01 14:49:47.492 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_11_init complete
2020-01-01 14:49:47.492 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 40: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.493 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_12_init
2020-01-01 14:49:47.494 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 40: Node advancer: Initialisation starting
2020-01-01 14:49:47.494 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3626: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.493 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 62: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.496 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 21 01 
2020-01-01 14:49:47.496 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3665 to queue - size 37
2020-01-01 14:49:47.497 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: ProtocolInfo
2020-01-01 14:49:47.497 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.496 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 62: Node advancer: Initialisation starting
2020-01-01 14:49:47.497 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@123b7f3
2020-01-01 14:49:47.498 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Listening = true
2020-01-01 14:49:47.498 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Routing   = true
2020-01-01 14:49:47.499 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Beaming   = true
2020-01-01 14:49:47.499 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_12_init complete
2020-01-01 14:49:47.499 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@196edaa
2020-01-01 14:49:47.500 [DEBUG] [ve.internal.protocol.ZWaveController] - NODE 68: Init node thread finished
2020-01-01 14:49:47.500 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Version   = 4
2020-01-01 14:49:47.501 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: FLIRS     = false
2020-01-01 14:49:47.501 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: Adding to device queue
2020-01-01 14:49:47.502 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Security  = false
2020-01-01 14:49:47.502 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_20_init
2020-01-01 14:49:47.502 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: Added 3663 to queue - size 2
2020-01-01 14:49:47.503 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Max Baud  = 40000
2020-01-01 14:49:47.503 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.503 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_20_init complete
2020-01-01 14:49:47.504 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:47.504 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Generic  = GENERIC_TYPE_SENSOR_MULTILEVEL
2020-01-01 14:49:47.505 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_21_init
2020-01-01 14:49:47.505 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 3: Specific = SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
2020-01-01 14:49:47.503 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 68: Node advancer - advancing to IDENTIFY_NODE
2020-01-01 14:49:47.505 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3666 to queue - size 38
2020-01-01 14:49:47.507 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_21_init complete
2020-01-01 14:49:47.506 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 3: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:47.507 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 68: Node advancer: Initialisation starting
2020-01-01 14:49:47.509 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_22_init
2020-01-01 14:49:47.509 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 3: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.509 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@a7665f
2020-01-01 14:49:47.508 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.508 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_22_init complete
2020-01-01 14:49:47.511 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 3: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:47.511 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_25_init
2020-01-01 14:49:47.512 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 3: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:47.512 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_25_init complete
2020-01-01 14:49:47.513 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 3: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:47.513 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3667 to queue - size 39
2020-01-01 14:49:47.513 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_26_init
2020-01-01 14:49:47.514 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.514 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 3: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:47.514 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_26_init complete
2020-01-01 14:49:47.515 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 3: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:47.515 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_27_init
2020-01-01 14:49:47.515 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3626: Transaction COMPLETED
2020-01-01 14:49:47.516 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 65ms
2020-01-01 14:49:47.516 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_27_init complete
2020-01-01 14:49:47.518 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3626: Transaction completed
2020-01-01 14:49:47.517 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3669 to queue - size 40
2020-01-01 14:49:47.518 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_28_init
2020-01-01 14:49:47.518 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.518 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3626 DONE
2020-01-01 14:49:47.519 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_28_init complete
2020-01-01 14:49:47.520 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 06 BC 
2020-01-01 14:49:47.521 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_29_init
2020-01-01 14:49:47.522 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_29_init complete
2020-01-01 14:49:47.523 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 06 BC 
2020-01-01 14:49:47.523 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_35_init
2020-01-01 14:49:47.524 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:47.524 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.525 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3626: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.525 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.526 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3627: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.527 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.525 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_35_init complete
2020-01-01 14:49:47.528 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:47.530 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_37_init
2020-01-01 14:49:47.530 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:47.528 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3672 to queue - size 40
2020-01-01 14:49:47.530 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_37_init complete
2020-01-01 14:49:47.532 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_38_init
2020-01-01 14:49:47.534 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3668 to queue - size 41
2020-01-01 14:49:47.535 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.535 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_38_init complete
2020-01-01 14:49:47.536 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_39_init
2020-01-01 14:49:47.537 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 3: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@fc345f
2020-01-01 14:49:47.537 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3676 to queue - size 42
2020-01-01 14:49:47.539 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.539 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 3: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:47.540 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_39_init complete
2020-01-01 14:49:47.541 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3671 to queue - size 43
2020-01-01 14:49:47.540 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 3: Node advancer - advancing to PING
2020-01-01 14:49:47.543 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.543 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 3: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:47.544 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.545 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3627: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.545 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 3: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:47.543 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_40_init
2020-01-01 14:49:47.545 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3670 to queue - size 44
2020-01-01 14:49:47.546 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:47.546 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.546 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 3: SECURITY not supported
2020-01-01 14:49:47.547 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:47.547 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.548 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 3: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:47.548 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3627: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.549 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 3: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1fea424
2020-01-01 14:49:47.549 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3677 to queue - size 45
2020-01-01 14:49:47.550 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.551 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_40_init complete
2020-01-01 14:49:47.551 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3673 to queue - size 46
2020-01-01 14:49:47.552 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_41_init
2020-01-01 14:49:47.552 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.554 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3674 to queue - size 47
2020-01-01 14:49:47.555 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.553 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_41_init complete
2020-01-01 14:49:47.556 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_42_init
2020-01-01 14:49:47.556 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 3675 to queue - size 48
2020-01-01 14:49:47.557 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_42_init complete
2020-01-01 14:49:47.557 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.557 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_43_init
2020-01-01 14:49:47.558 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.558 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_43_init complete
2020-01-01 14:49:47.558 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_44_init
2020-01-01 14:49:47.559 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_44_init complete
2020-01-01 14:49:47.559 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 3: Adding to device queue
2020-01-01 14:49:47.559 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_46_init
2020-01-01 14:49:47.560 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 3: Added 3678 to queue - size 3
2020-01-01 14:49:47.560 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_46_init complete
2020-01-01 14:49:47.560 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.560 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_47_init
2020-01-01 14:49:47.561 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:47.561 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3627: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.562 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:47.563 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: ProtocolInfo
2020-01-01 14:49:47.564 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Listening = true
2020-01-01 14:49:47.564 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Routing   = true
2020-01-01 14:49:47.565 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Beaming   = true
2020-01-01 14:49:47.565 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Version   = 4
2020-01-01 14:49:47.565 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: FLIRS     = false
2020-01-01 14:49:47.566 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Security  = false
2020-01-01 14:49:47.567 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Max Baud  = 40000
2020-01-01 14:49:47.567 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_47_init complete
2020-01-01 14:49:47.567 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:47.568 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:47.568 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_48_init
2020-01-01 14:49:47.568 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 6: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:47.569 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:47.569 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_48_init complete
2020-01-01 14:49:47.569 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.570 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:47.570 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_49_init
2020-01-01 14:49:47.570 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:47.571 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:47.572 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_49_init complete
2020-01-01 14:49:47.572 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:47.572 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:47.573 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_50_init
2020-01-01 14:49:47.573 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3627: Transaction COMPLETED
2020-01-01 14:49:47.574 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 47ms
2020-01-01 14:49:47.574 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3627: Transaction completed
2020-01-01 14:49:47.574 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_50_init complete
2020-01-01 14:49:47.575 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3627 DONE
2020-01-01 14:49:47.575 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_51_init
2020-01-01 14:49:47.575 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.576 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3627: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.576 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 6: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1e18543
2020-01-01 14:49:47.577 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_51_init complete
2020-01-01 14:49:47.577 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 6: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:47.578 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 6: Node advancer - advancing to PING
2020-01-01 14:49:47.578 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_52_init
2020-01-01 14:49:47.578 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 6: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:47.579 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 6: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:47.579 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_52_init complete
2020-01-01 14:49:47.579 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY doesn't encrypt PING
2020-01-01 14:49:47.580 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:47.580 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_56_init
2020-01-01 14:49:47.580 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@e30f5b
2020-01-01 14:49:47.576 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.581 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_56_init complete
2020-01-01 14:49:47.581 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 01 BB 
2020-01-01 14:49:47.582 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 01 BB 
2020-01-01 14:49:47.583 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_57_init
2020-01-01 14:49:47.584 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:47.584 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.584 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_57_init complete
2020-01-01 14:49:47.584 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3628: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.585 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.586 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_62_init
2020-01-01 14:49:47.586 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.586 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3628: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.587 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 93 16 01 02 02 01 33 
2020-01-01 14:49:47.587 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:47.587 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_62_init complete
2020-01-01 14:49:47.588 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.588 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Adding to device queue
2020-01-01 14:49:47.588 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_63_init
2020-01-01 14:49:47.589 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Added 3679 to queue - size 4
2020-01-01 14:49:47.589 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.590 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_63_init complete
2020-01-01 14:49:47.590 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.590 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=93 16 01 02 02 01 
2020-01-01 14:49:47.591 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_64_init
2020-01-01 14:49:47.591 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=93 16 01 02 02 01 
2020-01-01 14:49:47.592 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3628: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.592 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_64_init complete
2020-01-01 14:49:47.592 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:47.593 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3628: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.593 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_65_init
2020-01-01 14:49:47.594 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=93 16 01 02 02 01 
2020-01-01 14:49:47.594 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_65_init complete
2020-01-01 14:49:47.594 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: ProtocolInfo
2020-01-01 14:49:47.595 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Listening = true
2020-01-01 14:49:47.595 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_66_init
2020-01-01 14:49:47.596 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Routing   = false
2020-01-01 14:49:47.596 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Beaming   = true
2020-01-01 14:49:47.597 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Version   = 4
2020-01-01 14:49:47.597 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_66_init complete
2020-01-01 14:49:47.597 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: FLIRS     = false
2020-01-01 14:49:47.598 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Security  = false
2020-01-01 14:49:47.598 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_67_init
2020-01-01 14:49:47.598 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Max Baud  = 40000
2020-01-01 14:49:47.599 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Basic    = BASIC_TYPE_STATIC_CONTROLLER
2020-01-01 14:49:47.599 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_67_init complete
2020-01-01 14:49:47.599 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Generic  = GENERIC_TYPE_STATIC_CONTROLLER
2020-01-01 14:49:47.600 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 1: Specific = SPECIFIC_TYPE_PC_CONTROLLER
2020-01-01 14:49:47.600 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_68_init
2020-01-01 14:49:47.600 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 1: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:47.601 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 1: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.601 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_68_init complete
2020-01-01 14:49:47.601 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 1: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:47.602 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 1: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:47.602 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_69_init
2020-01-01 14:49:47.603 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 1: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:47.603 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_69_init complete
2020-01-01 14:49:47.603 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 1: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:47.604 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 1: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:47.604 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3628: Transaction COMPLETED
2020-01-01 14:49:47.604 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_70_init
2020-01-01 14:49:47.605 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_70_init complete
2020-01-01 14:49:47.605 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 21ms
2020-01-01 14:49:47.606 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3628: Transaction completed
2020-01-01 14:49:47.606 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3628 DONE
2020-01-01 14:49:47.606 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_71_init
2020-01-01 14:49:47.607 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_71_init complete
2020-01-01 14:49:47.607 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.608 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.609 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_73_init
2020-01-01 14:49:47.609 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 38 82 
2020-01-01 14:49:47.608 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3628: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.610 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 1: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1f56353
2020-01-01 14:49:47.610 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 1: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:47.609 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_73_init complete
2020-01-01 14:49:47.610 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 38 82 
2020-01-01 14:49:47.611 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_75_init
2020-01-01 14:49:47.611 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 1: Node advancer: FAILED_CHECK - Controller - terminating initialisation
2020-01-01 14:49:47.611 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:47.612 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_75_init complete
2020-01-01 14:49:47.612 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 1: Node advancer - advancing to DONE
2020-01-01 14:49:47.612 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3629: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.612 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_76_init
2020-01-01 14:49:47.613 [DEBUG] [l.initialization.ZWaveNodeSerializer] - NODE 1: Serializing to file /var/lib/openhab2/zwave/network_e14c9b49__node_1.xml
2020-01-01 14:49:47.613 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.614 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.615 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.616 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3629: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.623 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_76_init complete
2020-01-01 14:49:47.616 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 53 9C 01 04 07 01 7A 
2020-01-01 14:49:47.624 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:47.624 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_78_init
2020-01-01 14:49:47.624 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.624 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_78_init complete
2020-01-01 14:49:47.625 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.625 [DEBUG] [ve.internal.protocol.ZWaveController] - Waiting for init thread Node_80_init
2020-01-01 14:49:47.625 [DEBUG] [ve.internal.protocol.ZWaveController] - Init thread Node_80_init complete
2020-01-01 14:49:47.626 [DEBUG] [ve.internal.protocol.ZWaveController] - All init threads complete
2020-01-01 14:49:47.626 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=53 9C 01 04 07 01 
2020-01-01 14:49:47.627 [DEBUG] [zwave.handler.ZWaveControllerHandler] - Controller: Incoming Network State Event true
2020-01-01 14:49:47.628 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=53 9C 01 04 07 01 
2020-01-01 14:49:47.629 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Controller status changed to ONLINE.
2020-01-01 14:49:47.629 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Controller status changed to ONLINE.
2020-01-01 14:49:47.630 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.630 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.631 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3629: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.632 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:47.632 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Updating node properties.
2020-01-01 14:49:47.635 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Updating node properties. MAN=134
2020-01-01 14:49:47.635 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Updating node properties. MAN=134. SET. Was 134
2020-01-01 14:49:47.632 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Updating node properties.
2020-01-01 14:49:47.637 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Properties synchronised
2020-01-01 14:49:47.633 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3629: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.639 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=53 9C 01 04 07 01 
2020-01-01 14:49:47.638 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Updating node properties. MAN=2147483647
2020-01-01 14:49:47.640 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: ProtocolInfo
2020-01-01 14:49:47.640 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Listening = false
2020-01-01 14:49:47.641 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:47.641 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Routing   = true
2020-01-01 14:49:47.640 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Properties synchronised
2020-01-01 14:49:47.645 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Controller status changed to ONLINE.
2020-01-01 14:49:47.645 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Controller status changed to ONLINE.
2020-01-01 14:49:47.646 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.646 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Controller status changed to ONLINE.
2020-01-01 14:49:47.647 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.648 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Updating node properties.
2020-01-01 14:49:47.649 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Updating node properties. MAN=134
2020-01-01 14:49:47.650 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Updating node properties. MAN=134. SET. Was 134
2020-01-01 14:49:47.651 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Properties synchronised
2020-01-01 14:49:47.653 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.653 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.654 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising Thing Node...
2020-01-01 14:49:47.655 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising cmd channel zwave:device:9412cbc8:node73:switch_dimmer for OnOffType
2020-01-01 14:49:47.657 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising cmd channel zwave:device:9412cbc8:node73:switch_dimmer for PercentType
2020-01-01 14:49:47.657 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising state channel zwave:device:9412cbc8:node73:switch_dimmer for PercentType
2020-01-01 14:49:47.659 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising cmd channel zwave:device:9412cbc8:node73:color_color for OnOffType
2020-01-01 14:49:47.660 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising cmd channel zwave:device:9412cbc8:node73:color_color for PercentType
2020-01-01 14:49:47.661 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising state channel zwave:device:9412cbc8:node73:color_color for PercentType
2020-01-01 14:49:47.662 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising state channel zwave:device:9412cbc8:node73:color_color for PercentType
2020-01-01 14:49:47.663 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising cmd channel zwave:device:9412cbc8:node73:color_color for HSBType
2020-01-01 14:49:47.664 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising state channel zwave:device:9412cbc8:node73:color_color for HSBType
2020-01-01 14:49:47.665 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising cmd channel zwave:device:9412cbc8:node73:color_temperature for OnOffType
2020-01-01 14:49:47.667 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.669 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Initialising Thing Node...
2020-01-01 14:49:47.671 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Beaming   = true
2020-01-01 14:49:47.672 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Version   = 4
2020-01-01 14:49:47.672 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:47.673 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: FLIRS     = false
2020-01-01 14:49:47.673 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.674 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Security  = false
2020-01-01 14:49:47.674 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising Thing Node...
2020-01-01 14:49:47.684 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising cmd channel zwave:device:9412cbc8:node76:switch_dimmer for OnOffType
2020-01-01 14:49:47.675 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Max Baud  = 40000
2020-01-01 14:49:47.685 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising cmd channel zwave:device:9412cbc8:node76:switch_dimmer for PercentType
2020-01-01 14:49:47.686 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:47.686 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Polling initialised at 86400 seconds - start in 81388800 milliseconds.
2020-01-01 14:49:47.687 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Generic  = GENERIC_TYPE_SENSOR_NOTIFICATION
2020-01-01 14:49:47.687 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising state channel zwave:device:9412cbc8:node76:switch_dimmer for PercentType
2020-01-01 14:49:47.687 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Device initialisation complete.
2020-01-01 14:49:47.688 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 56: Specific = SPECIFIC_TYPE_NOTIFICATION_SENSOR
2020-01-01 14:49:47.688 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Controller status changed to ONLINE.
2020-01-01 14:49:47.688 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising cmd channel zwave:device:9412cbc8:node76:color_color for OnOffType
2020-01-01 14:49:47.689 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.689 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising cmd channel zwave:device:9412cbc8:node76:color_color for PercentType
2020-01-01 14:49:47.690 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising state channel zwave:device:9412cbc8:node76:color_color for PercentType
2020-01-01 14:49:47.691 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising state channel zwave:device:9412cbc8:node76:color_color for PercentType
2020-01-01 14:49:47.692 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising cmd channel zwave:device:9412cbc8:node76:color_color for HSBType
2020-01-01 14:49:47.692 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising cmd channel zwave:device:9412cbc8:node73:color_temperature for PercentType
2020-01-01 14:49:47.693 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising state channel zwave:device:9412cbc8:node76:color_color for HSBType
2020-01-01 14:49:47.693 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Initialising state channel zwave:device:9412cbc8:node73:color_temperature for PercentType
2020-01-01 14:49:47.694 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising cmd channel zwave:device:9412cbc8:node76:color_temperature for OnOffType
2020-01-01 14:49:47.694 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Polling initialised at 86400 seconds - start in 83808000 milliseconds.
2020-01-01 14:49:47.694 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising cmd channel zwave:device:9412cbc8:node76:color_temperature for PercentType
2020-01-01 14:49:47.695 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Device initialisation complete.
2020-01-01 14:49:47.695 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Updating node properties.
2020-01-01 14:49:47.695 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Initialising state channel zwave:device:9412cbc8:node76:color_temperature for PercentType
2020-01-01 14:49:47.695 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Updating node properties. MAN=271
2020-01-01 14:49:47.696 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.696 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Polling initialised at 1800 seconds - start in 669600 milliseconds.
2020-01-01 14:49:47.688 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 56: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:47.704 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 56: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.705 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 56: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:47.706 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 56: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:47.707 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 56: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:47.695 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Controller status changed to ONLINE.
2020-01-01 14:49:47.708 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Device initialisation complete.
2020-01-01 14:49:47.708 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.709 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Controller status changed to ONLINE.
2020-01-01 14:49:47.703 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Properties synchronised
2020-01-01 14:49:47.708 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 56: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:47.712 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Updating node properties.
2020-01-01 14:49:47.713 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Updating node properties. MAN=271
2020-01-01 14:49:47.714 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 56: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:47.714 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.710 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.715 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3629: Transaction COMPLETED
2020-01-01 14:49:47.716 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Updating node properties.
2020-01-01 14:49:47.717 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Updating node properties. MAN=280
2020-01-01 14:49:47.718 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Updating node properties. MAN=280. SET. Was 280
2020-01-01 14:49:47.719 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Properties synchronised
2020-01-01 14:49:47.721 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Updating node properties.
2020-01-01 14:49:47.722 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Updating node properties. MAN=271
2020-01-01 14:49:47.722 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:47.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 111ms
2020-01-01 14:49:47.724 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3629: Transaction completed
2020-01-01 14:49:47.726 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3629 DONE
2020-01-01 14:49:47.727 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Properties synchronised
2020-01-01 14:49:47.723 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.730 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Properties synchronised
2020-01-01 14:49:47.730 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.731 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising Thing Node...
2020-01-01 14:49:47.732 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising cmd channel zwave:device:9412cbc8:node2:switch_binary for OnOffType
2020-01-01 14:49:47.732 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Update ASSOCIATION group_ZWaveAssociationGroup [index=3, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:47.733 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising state channel zwave:device:9412cbc8:node2:switch_binary for OnOffType
2020-01-01 14:49:47.734 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising state channel zwave:device:9412cbc8:node2:switch_binary for OnOffType
2020-01-01 14:49:47.735 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising cmd channel zwave:device:9412cbc8:node2:meter_kwh for DecimalType
2020-01-01 14:49:47.744 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Updating node properties.
2020-01-01 14:49:47.746 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.747 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.747 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3629: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.746 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising state channel zwave:device:9412cbc8:node2:meter_kwh for DecimalType
2020-01-01 14:49:47.747 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.747 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising Thing Node...
2020-01-01 14:49:47.749 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 56: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@19a052f
2020-01-01 14:49:47.750 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 56: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:47.750 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 1D A7 
2020-01-01 14:49:47.751 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 56: Node advancer - advancing to REQUEST_NIF
2020-01-01 14:49:47.752 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 56: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:47.752 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:47.753 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 56: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@9899b8
2020-01-01 14:49:47.753 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 56: Bump transaction 3680 priority from Controller to Immediate
2020-01-01 14:49:47.754 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Updating node properties. MAN=271
2020-01-01 14:49:47.755 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.750 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising cmd channel zwave:device:9412cbc8:node2:meter_current for DecimalType
2020-01-01 14:49:47.750 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:scene_number for DecimalType
2020-01-01 14:49:47.757 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising state channel zwave:device:9412cbc8:node2:meter_current for DecimalType
2020-01-01 14:49:47.757 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:scene_number for DecimalType
2020-01-01 14:49:47.757 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Properties synchronised
2020-01-01 14:49:47.758 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising cmd channel zwave:device:9412cbc8:node2:meter_powerfactor for DecimalType
2020-01-01 14:49:47.759 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising state channel zwave:device:9412cbc8:node2:meter_powerfactor for DecimalType
2020-01-01 14:49:47.760 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising cmd channel zwave:device:9412cbc8:node2:meter_watts for DecimalType
2020-01-01 14:49:47.761 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising state channel zwave:device:9412cbc8:node2:meter_watts for DecimalType
2020-01-01 14:49:47.762 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising cmd channel zwave:device:9412cbc8:node2:meter_voltage for DecimalType
2020-01-01 14:49:47.763 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Initialising state channel zwave:device:9412cbc8:node2:meter_voltage for DecimalType
2020-01-01 14:49:47.764 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Polling initialised at 86400 seconds - start in 9763200 milliseconds.
2020-01-01 14:49:47.765 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Device initialisation complete.
2020-01-01 14:49:47.752 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 1D A7 
2020-01-01 14:49:47.767 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:sensor_binary1 for OnOffType
2020-01-01 14:49:47.767 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:47.768 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_binary1 for OnOffType
2020-01-01 14:49:47.768 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3630: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.769 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_binary1 for OnOffType
2020-01-01 14:49:47.769 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Controller status changed to ONLINE.
2020-01-01 14:49:47.769 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 56: Adding to device queue
2020-01-01 14:49:47.769 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.770 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 56: Added 3680 to queue - size 5
2020-01-01 14:49:47.770 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.770 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:alarm_general1 for OnOffType
2020-01-01 14:49:47.770 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.770 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:alarm_general1 for OnOffType
2020-01-01 14:49:47.771 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:sensor_binary2 for OnOffType
2020-01-01 14:49:47.772 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:47.754 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.773 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.773 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising Thing Node...
2020-01-01 14:49:47.774 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising Thing Node...
2020-01-01 14:49:47.774 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.775 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3630: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.775 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:meter_kwh for DecimalType
2020-01-01 14:49:47.776 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:47.777 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.777 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:47.776 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:meter_kwh for DecimalType
2020-01-01 14:49:47.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:sensor_power for DecimalType
2020-01-01 14:49:47.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:meter_watts for DecimalType
2020-01-01 14:49:47.780 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Updating node properties.
2020-01-01 14:49:47.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:sensor_power for DecimalType
2020-01-01 14:49:47.782 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.782 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:meter_watts for DecimalType
2020-01-01 14:49:47.782 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:meter_watts for DecimalType
2020-01-01 14:49:47.784 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:meter_kwh for DecimalType
2020-01-01 14:49:47.785 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:meter_kwh for DecimalType
2020-01-01 14:49:47.772 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_binary2 for OnOffType
2020-01-01 14:49:47.787 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Updating node properties. MAN=134
2020-01-01 14:49:47.787 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:meter_watts for DecimalType
2020-01-01 14:49:47.787 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_binary2 for OnOffType
2020-01-01 14:49:47.788 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Updating node properties. MAN=134. SET. Was 134
2020-01-01 14:49:47.788 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:meter_reset for OnOffType
2020-01-01 14:49:47.788 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:alarm_general2 for OnOffType
2020-01-01 14:49:47.788 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:47.789 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:meter_reset for OnOffType
2020-01-01 14:49:47.789 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Properties synchronised
2020-01-01 14:49:47.789 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:alarm_general2 for OnOffType
2020-01-01 14:49:47.789 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:scene_number for DecimalType
2020-01-01 14:49:47.790 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:scene_number for DecimalType
2020-01-01 14:49:47.790 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:sensor_temperature3 for QuantityType
2020-01-01 14:49:47.788 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:meter_reset for OnOffType
2020-01-01 14:49:47.790 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3630: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.791 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:alarm_heat for OnOffType
2020-01-01 14:49:47.791 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_temperature3 for QuantityType
2020-01-01 14:49:47.792 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:47.792 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:sensor_temperature4 for QuantityType
2020-01-01 14:49:47.793 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_temperature4 for QuantityType
2020-01-01 14:49:47.794 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3630: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.795 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:sensor_temperature5 for QuantityType
2020-01-01 14:49:47.796 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_temperature5 for QuantityType
2020-01-01 14:49:47.795 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:47.797 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising cmd channel zwave:device:9412cbc8:node57:sensor_temperature6 for QuantityType
2020-01-01 14:49:47.798 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:alarm_heat for OnOffType
2020-01-01 14:49:47.798 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Initialising state channel zwave:device:9412cbc8:node57:sensor_temperature6 for QuantityType
2020-01-01 14:49:47.791 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:meter_reset for OnOffType
2020-01-01 14:49:47.799 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:notification_send for DecimalType
2020-01-01 14:49:47.799 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:scene_number for DecimalType
2020-01-01 14:49:47.800 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Polling initialised at 1800 seconds - start in 307800 milliseconds.
2020-01-01 14:49:47.800 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:notification_send for DecimalType
2020-01-01 14:49:47.801 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Device initialisation complete.
2020-01-01 14:49:47.802 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Controller status changed to ONLINE.
2020-01-01 14:49:47.803 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.805 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Updating node properties.
2020-01-01 14:49:47.806 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Updating node properties. MAN=271
2020-01-01 14:49:47.807 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.808 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Properties synchronised
2020-01-01 14:49:47.810 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: ProtocolInfo
2020-01-01 14:49:47.812 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Listening = true
2020-01-01 14:49:47.813 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Routing   = true
2020-01-01 14:49:47.815 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Beaming   = true
2020-01-01 14:49:47.817 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Version   = 4
2020-01-01 14:49:47.816 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:scene_number for DecimalType
2020-01-01 14:49:47.818 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=0, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:47.818 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: FLIRS     = false
2020-01-01 14:49:47.819 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.820 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Security  = false
2020-01-01 14:49:47.821 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Max Baud  = 40000
2020-01-01 14:49:47.823 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:47.825 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:47.827 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 29: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:47.808 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:47.820 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising Thing Node...
2020-01-01 14:49:47.829 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising cmd channel zwave:device:9412cbc8:node3:sensor_relhumidity for DecimalType
2020-01-01 14:49:47.829 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:alarm_power for OnOffType
2020-01-01 14:49:47.830 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising state channel zwave:device:9412cbc8:node3:sensor_relhumidity for DecimalType
2020-01-01 14:49:47.829 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:alarm_heat for OnOffType
2020-01-01 14:49:47.830 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 29: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:47.831 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising cmd channel zwave:device:9412cbc8:node3:sensor_ultraviolet for DecimalType
2020-01-01 14:49:47.829 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.831 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:alarm_heat for OnOffType
2020-01-01 14:49:47.832 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:alarm_power for OnOffType
2020-01-01 14:49:47.832 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising Thing Node...
2020-01-01 14:49:47.832 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:alarm_power for OnOffType
2020-01-01 14:49:47.833 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:alarm_power for OnOffType
2020-01-01 14:49:47.833 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:switch_binary1 for OnOffType
2020-01-01 14:49:47.833 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:switch_binary1 for OnOffType
2020-01-01 14:49:47.834 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:notification_send for DecimalType
2020-01-01 14:49:47.834 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:switch_binary1 for OnOffType
2020-01-01 14:49:47.834 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:notification_send for DecimalType
2020-01-01 14:49:47.835 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:meter_kwh for DecimalType
2020-01-01 14:49:47.835 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:meter_kwh1 for DecimalType
2020-01-01 14:49:47.837 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:meter_kwh for DecimalType
2020-01-01 14:49:47.840 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:meter_watts for DecimalType
2020-01-01 14:49:47.842 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:meter_watts for DecimalType
2020-01-01 14:49:47.832 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising state channel zwave:device:9412cbc8:node3:sensor_ultraviolet for DecimalType
2020-01-01 14:49:47.833 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 29: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.844 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:switch_binary1 for OnOffType
2020-01-01 14:49:47.844 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 29: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:47.845 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:meter_kwh1 for DecimalType
2020-01-01 14:49:47.844 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:meter_reset for OnOffType
2020-01-01 14:49:47.845 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 29: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:47.845 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:switch_binary1 for OnOffType
2020-01-01 14:49:47.845 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 29: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:47.845 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:meter_reset for OnOffType
2020-01-01 14:49:47.846 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:switch_binary1 for OnOffType
2020-01-01 14:49:47.847 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising cmd channel zwave:device:9412cbc8:node3:sensor_temperature for QuantityType
2020-01-01 14:49:47.847 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:meter_watts1 for DecimalType
2020-01-01 14:49:47.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising state channel zwave:device:9412cbc8:node3:sensor_temperature for QuantityType
2020-01-01 14:49:47.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:meter_watts1 for DecimalType
2020-01-01 14:49:47.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:meter_watts1 for DecimalType
2020-01-01 14:49:47.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:scene_number for DecimalType
2020-01-01 14:49:47.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:meter_watts1 for DecimalType
2020-01-01 14:49:47.849 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:switch_binary2 for OnOffType
2020-01-01 14:49:47.849 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising cmd channel zwave:device:9412cbc8:node3:sensor_luminance for DecimalType
2020-01-01 14:49:47.849 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:switch_binary2 for OnOffType
2020-01-01 14:49:47.849 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:scene_number for DecimalType
2020-01-01 14:49:47.849 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 29: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:47.850 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:meter_kwh1 for DecimalType
2020-01-01 14:49:47.850 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 29: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:47.850 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:switch_binary2 for OnOffType
2020-01-01 14:49:47.851 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3630: Transaction COMPLETED
2020-01-01 14:49:47.851 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:alarm_general for OnOffType
2020-01-01 14:49:47.852 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 84ms
2020-01-01 14:49:47.852 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:meter_kwh1 for DecimalType
2020-01-01 14:49:47.853 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:meter_kwh2 for DecimalType
2020-01-01 14:49:47.853 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3630: Transaction completed
2020-01-01 14:49:47.853 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3630 DONE
2020-01-01 14:49:47.853 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising cmd channel zwave:device:9412cbc8:node80:switch_binary2 for OnOffType
2020-01-01 14:49:47.853 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:meter_kwh2 for DecimalType
2020-01-01 14:49:47.855 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising state channel zwave:device:9412cbc8:node3:sensor_luminance for DecimalType
2020-01-01 14:49:47.855 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:alarm_general for OnOffType
2020-01-01 14:49:47.855 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:switch_binary2 for OnOffType
2020-01-01 14:49:47.856 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising cmd channel zwave:device:9412cbc8:node3:alarm_motion for OnOffType
2020-01-01 14:49:47.856 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising cmd channel zwave:device:9412cbc8:node62:meter_watts2 for DecimalType
2020-01-01 14:49:47.856 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising state channel zwave:device:9412cbc8:node3:alarm_motion for OnOffType
2020-01-01 14:49:47.856 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Initialising state channel zwave:device:9412cbc8:node62:meter_watts2 for DecimalType
2020-01-01 14:49:47.857 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:notification_send for DecimalType
2020-01-01 14:49:47.857 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising cmd channel zwave:device:9412cbc8:node3:alarm_tamper for OnOffType
2020-01-01 14:49:47.858 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising state channel zwave:device:9412cbc8:node3:alarm_tamper for OnOffType
2020-01-01 14:49:47.858 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:notification_send for DecimalType
2020-01-01 14:49:47.859 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising cmd channel zwave:device:9412cbc8:node3:battery-level for PercentType
2020-01-01 14:49:47.860 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:47.860 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Initialising state channel zwave:device:9412cbc8:node3:battery-level for PercentType
2020-01-01 14:49:47.861 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Polling initialised at 1800 seconds - start in 1364400 milliseconds.
2020-01-01 14:49:47.862 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.862 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.856 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Initialising state channel zwave:device:9412cbc8:node80:switch_binary2 for OnOffType
2020-01-01 14:49:47.863 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.863 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising Thing Node...
2020-01-01 14:49:47.862 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 3: Device initialisation complete.
2020-01-01 14:49:47.858 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Polling initialised at 86400 seconds - start in 66528000 milliseconds.
2020-01-01 14:49:47.863 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Polling initialised at 86400 seconds - start in 7689600 milliseconds.
2020-01-01 14:49:47.865 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 2B 91 
2020-01-01 14:49:47.865 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Device initialisation complete.
2020-01-01 14:49:47.865 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Device initialisation complete.
2020-01-01 14:49:47.865 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:switch_binary1 for OnOffType
2020-01-01 14:49:47.866 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Controller status changed to ONLINE.
2020-01-01 14:49:47.865 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 2B 91 
2020-01-01 14:49:47.866 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3630: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.867 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.868 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:47.868 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 29: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@15045d0
2020-01-01 14:49:47.866 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:switch_binary1 for OnOffType
2020-01-01 14:49:47.869 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3631: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.869 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.870 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Updating node properties.
2020-01-01 14:49:47.870 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.870 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Updating node properties. MAN=271
2020-01-01 14:49:47.871 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.871 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.870 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:switch_binary1 for OnOffType
2020-01-01 14:49:47.871 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3631: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.872 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 00 04 20 01 DC 
2020-01-01 14:49:47.872 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Properties synchronised
2020-01-01 14:49:47.872 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:47.872 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.866 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Controller status changed to ONLINE.
2020-01-01 14:49:47.873 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:meter_kwh1 for DecimalType
2020-01-01 14:49:47.874 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.874 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 29: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:47.875 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 29: Node advancer - advancing to PING
2020-01-01 14:49:47.865 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:scene_number for DecimalType
2020-01-01 14:49:47.873 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.876 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 29: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:47.877 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:scene_number for DecimalType
2020-01-01 14:49:47.876 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Updating node properties.
2020-01-01 14:49:47.877 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 29: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:47.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:sensor_power for DecimalType
2020-01-01 14:49:47.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Updating node properties. MAN=271
2020-01-01 14:49:47.878 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 29: SECURITY not supported
2020-01-01 14:49:47.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:sensor_power for DecimalType
2020-01-01 14:49:47.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.878 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 29: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:47.879 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Properties synchronised
2020-01-01 14:49:47.879 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 29: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@52c69e
2020-01-01 14:49:47.871 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Controller status changed to ONLINE.
2020-01-01 14:49:47.881 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 29: Adding to device queue
2020-01-01 14:49:47.882 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 29: Added 3681 to queue - size 6
2020-01-01 14:49:47.883 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:47.884 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:47.885 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.885 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.879 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:meter_kwh for DecimalType
2020-01-01 14:49:47.890 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:meter_kwh1 for DecimalType
2020-01-01 14:49:47.895 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:meter_kwh for DecimalType
2020-01-01 14:49:47.889 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:47.894 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising Thing Node...
2020-01-01 14:49:47.896 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:meter_watts for DecimalType
2020-01-01 14:49:47.897 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:meter_watts for DecimalType
2020-01-01 14:49:47.897 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:47.898 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3631: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.898 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:meter_reset for OnOffType
2020-01-01 14:49:47.899 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:47.900 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3631: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:47.901 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:meter_reset for OnOffType
2020-01-01 14:49:47.901 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:47.902 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:config_decimal_param19 for DecimalType
2020-01-01 14:49:47.902 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: ProtocolInfo
2020-01-01 14:49:47.903 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:config_decimal_param19 for DecimalType
2020-01-01 14:49:47.904 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_general for OnOffType
2020-01-01 14:49:47.906 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_general for OnOffType
2020-01-01 14:49:47.906 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Updating node properties.
2020-01-01 14:49:47.903 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Listening = true
2020-01-01 14:49:47.907 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Updating node properties. MAN=271
2020-01-01 14:49:47.907 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:47.908 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.909 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Properties synchronised
2020-01-01 14:49:47.910 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.896 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:meter_watts1 for DecimalType
2020-01-01 14:49:47.897 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:sensor_power for DecimalType
2020-01-01 14:49:47.911 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising Thing Node...
2020-01-01 14:49:47.911 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:sensor_power for DecimalType
2020-01-01 14:49:47.912 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:scene_number for DecimalType
2020-01-01 14:49:47.908 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_system for OnOffType
2020-01-01 14:49:47.913 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Routing   = true
2020-01-01 14:49:47.914 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Beaming   = true
2020-01-01 14:49:47.914 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_system for OnOffType
2020-01-01 14:49:47.914 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Version   = 4
2020-01-01 14:49:47.914 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:scene_number for DecimalType
2020-01-01 14:49:47.912 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:meter_watts for DecimalType
2020-01-01 14:49:47.916 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:sensor_power for DecimalType
2020-01-01 14:49:47.916 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:meter_watts for DecimalType
2020-01-01 14:49:47.917 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:sensor_power for DecimalType
2020-01-01 14:49:47.917 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:meter_watts1 for DecimalType
2020-01-01 14:49:47.920 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:meter_kwh for DecimalType
2020-01-01 14:49:47.920 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:switch_binary2 for OnOffType
2020-01-01 14:49:47.921 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:meter_kwh for DecimalType
2020-01-01 14:49:47.922 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:meter_watts for DecimalType
2020-01-01 14:49:47.922 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:switch_binary2 for OnOffType
2020-01-01 14:49:47.923 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:meter_watts for DecimalType
2020-01-01 14:49:47.921 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:meter_kwh for DecimalType
2020-01-01 14:49:47.924 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:meter_reset for OnOffType
2020-01-01 14:49:47.925 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:meter_kwh for DecimalType
2020-01-01 14:49:47.925 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:meter_reset for OnOffType
2020-01-01 14:49:47.925 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:47.926 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: FLIRS     = false
2020-01-01 14:49:47.927 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Security  = false
2020-01-01 14:49:47.928 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:47.928 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Max Baud  = 40000
2020-01-01 14:49:47.929 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_power for OnOffType
2020-01-01 14:49:47.929 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:switch_binary2 for OnOffType
2020-01-01 14:49:47.930 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_power for OnOffType
2020-01-01 14:49:47.930 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising Thing Node...
2020-01-01 14:49:47.931 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:meter_kwh2 for DecimalType
2020-01-01 14:49:47.931 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_heat for OnOffType
2020-01-01 14:49:47.931 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:meter_kwh2 for DecimalType
2020-01-01 14:49:47.932 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:meter_reset for OnOffType
2020-01-01 14:49:47.932 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_heat for OnOffType
2020-01-01 14:49:47.932 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:47.933 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:meter_reset for OnOffType
2020-01-01 14:49:47.933 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:switch_dimmer1 for OnOffType
2020-01-01 14:49:47.934 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Generic  = GENERIC_TYPE_SENSOR_BINARY
2020-01-01 14:49:47.934 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:switch_dimmer1 for PercentType
2020-01-01 14:49:47.935 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 43: Specific = SPECIFIC_TYPE_ROUTING_SENSOR_BINARY
2020-01-01 14:49:47.935 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising cmd channel zwave:device:9412cbc8:node63:meter_watts2 for DecimalType
2020-01-01 14:49:47.935 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 43: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:47.935 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Initialising state channel zwave:device:9412cbc8:node63:meter_watts2 for DecimalType
2020-01-01 14:49:47.934 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:scene_number for DecimalType
2020-01-01 14:49:47.933 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:config_decimal_param19 for DecimalType
2020-01-01 14:49:47.936 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:scene_number for DecimalType
2020-01-01 14:49:47.936 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 43: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:47.937 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:config_decimal_param19 for DecimalType
2020-01-01 14:49:47.937 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 43: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:47.937 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:alarm_heat for OnOffType
2020-01-01 14:49:47.938 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 43: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:47.935 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:switch_dimmer1 for PercentType
2020-01-01 14:49:47.939 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Polling initialised at 86400 seconds - start in 85104000 milliseconds.
2020-01-01 14:49:47.939 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:switch_dimmer1 for PercentType
2020-01-01 14:49:47.939 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:scene_number for DecimalType
2020-01-01 14:49:47.940 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 43: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:47.940 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:scene_number for DecimalType
2020-01-01 14:49:47.941 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:sensor_power for DecimalType
2020-01-01 14:49:47.942 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 43: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:47.938 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_general for OnOffType
2020-01-01 14:49:47.938 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:alarm_heat for OnOffType
2020-01-01 14:49:47.942 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:sensor_power for DecimalType
2020-01-01 14:49:47.944 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_general for OnOffType
2020-01-01 14:49:47.944 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 43: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:47.945 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:alarm_power for OnOffType
2020-01-01 14:49:47.946 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3631: Transaction COMPLETED
2020-01-01 14:49:47.940 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Device initialisation complete.
2020-01-01 14:49:47.947 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Controller status changed to ONLINE.
2020-01-01 14:49:47.947 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:sensor_power1 for DecimalType
2020-01-01 14:49:47.946 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:meter_kwh for DecimalType
2020-01-01 14:49:47.948 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:meter_kwh for DecimalType
2020-01-01 14:49:47.948 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:47.949 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 80ms
2020-01-01 14:49:47.949 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:meter_watts for DecimalType
2020-01-01 14:49:47.950 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3631: Transaction completed
2020-01-01 14:49:47.946 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:alarm_power for OnOffType
2020-01-01 14:49:47.945 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_system for OnOffType
2020-01-01 14:49:47.952 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3631 DONE
2020-01-01 14:49:47.953 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:switch_binary1 for OnOffType
2020-01-01 14:49:47.950 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:meter_watts for DecimalType
2020-01-01 14:49:47.954 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:sensor_power1 for DecimalType
2020-01-01 14:49:47.955 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:meter_reset for OnOffType
2020-01-01 14:49:47.955 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Updating node properties.
2020-01-01 14:49:47.955 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:meter_kwh1 for DecimalType
2020-01-01 14:49:47.955 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:meter_reset for OnOffType
2020-01-01 14:49:47.957 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:meter_kwh1 for DecimalType
2020-01-01 14:49:47.957 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:config_decimal_param19 for DecimalType
2020-01-01 14:49:47.958 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:meter_watts1 for DecimalType
2020-01-01 14:49:47.958 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:config_decimal_param19 for DecimalType
2020-01-01 14:49:47.959 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:meter_watts1 for DecimalType
2020-01-01 14:49:47.959 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_general for OnOffType
2020-01-01 14:49:47.960 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_general for OnOffType
2020-01-01 14:49:47.960 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_general1 for OnOffType
2020-01-01 14:49:47.961 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_general1 for OnOffType
2020-01-01 14:49:47.961 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_system for OnOffType
2020-01-01 14:49:47.962 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_system for OnOffType
2020-01-01 14:49:47.962 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:notification_send1 for DecimalType
2020-01-01 14:49:47.954 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_system for OnOffType
2020-01-01 14:49:47.963 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Updating node properties. MAN=271
2020-01-01 14:49:47.963 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:notification_send1 for DecimalType
2020-01-01 14:49:47.964 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_power for OnOffType
2020-01-01 14:49:47.964 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:47.964 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_power for OnOffType
2020-01-01 14:49:47.954 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:switch_binary1 for OnOffType
2020-01-01 14:49:47.966 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:switch_binary1 for OnOffType
2020-01-01 14:49:47.966 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_power for OnOffType
2020-01-01 14:49:47.968 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:meter_watts1 for DecimalType
2020-01-01 14:49:47.970 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_power for OnOffType
2020-01-01 14:49:47.969 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:meter_watts1 for DecimalType
2020-01-01 14:49:47.967 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Properties synchronised
2020-01-01 14:49:47.966 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_system1 for OnOffType
2020-01-01 14:49:47.971 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_system1 for OnOffType
2020-01-01 14:49:47.971 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_heat for OnOffType
2020-01-01 14:49:47.972 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_power1 for OnOffType
2020-01-01 14:49:47.973 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_heat for OnOffType
2020-01-01 14:49:47.973 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_power1 for OnOffType
2020-01-01 14:49:47.974 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_heat for OnOffType
2020-01-01 14:49:47.974 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:switch_dimmer1 for OnOffType
2020-01-01 14:49:47.975 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:47.975 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_heat for OnOffType
2020-01-01 14:49:47.977 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3631: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:47.977 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:switch_dimmer1 for OnOffType
2020-01-01 14:49:47.980 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:47.980 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:meter_kwh1 for DecimalType
2020-01-01 14:49:47.980 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:switch_dimmer1 for PercentType
2020-01-01 14:49:47.981 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 39 83 
2020-01-01 14:49:47.982 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 39 83 
2020-01-01 14:49:47.981 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:switch_dimmer1 for PercentType
2020-01-01 14:49:47.984 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:alarm_heat1 for OnOffType
2020-01-01 14:49:47.985 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:47.986 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:alarm_heat1 for OnOffType
2020-01-01 14:49:47.986 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:47.989 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:switch_dimmer2 for OnOffType
2020-01-01 14:49:47.990 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:meter_kwh1 for DecimalType
2020-01-01 14:49:47.991 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising cmd channel zwave:device:9412cbc8:node20:switch_binary2 for OnOffType
2020-01-01 14:49:47.992 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:switch_binary2 for OnOffType
2020-01-01 14:49:47.989 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 00 04 20 01 DC 
2020-01-01 14:49:47.983 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.000 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Initialising state channel zwave:device:9412cbc8:node20:switch_binary2 for OnOffType
2020-01-01 14:49:47.999 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:switch_dimmer1 for PercentType
2020-01-01 14:49:48.001 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising cmd channel zwave:device:9412cbc8:node9:switch_dimmer2 for PercentType
2020-01-01 14:49:48.001 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:switch_dimmer1 for PercentType
2020-01-01 14:49:48.002 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:switch_dimmer2 for PercentType
2020-01-01 14:49:48.003 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 43: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@c5f53e
2020-01-01 14:49:48.004 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 43: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.004 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:switch_dimmer1 for PercentType
2020-01-01 14:49:48.005 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Polling initialised at 86400 seconds - start in 46569600 milliseconds.
2020-01-01 14:49:48.006 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Device initialisation complete.
2020-01-01 14:49:48.007 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Controller status changed to ONLINE.
2020-01-01 14:49:48.007 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3632: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.008 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.009 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:switch_dimmer1 for PercentType
2020-01-01 14:49:48.016 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.017 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:sensor_power1 for DecimalType
2020-01-01 14:49:48.011 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Initialising state channel zwave:device:9412cbc8:node9:switch_dimmer2 for PercentType
2020-01-01 14:49:48.021 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:sensor_power1 for DecimalType
2020-01-01 14:49:48.012 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.023 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Polling initialised at 86400 seconds - start in 11491200 milliseconds.
2020-01-01 14:49:48.010 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Updating node properties.
2020-01-01 14:49:48.024 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Device initialisation complete.
2020-01-01 14:49:48.005 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 43: Node advancer - advancing to PING
2020-01-01 14:49:48.024 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.025 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 43: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.025 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 43: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.025 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3632: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.025 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.026 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising Thing Node...
2020-01-01 14:49:48.025 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Controller status changed to ONLINE.
2020-01-01 14:49:48.026 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.022 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:meter_kwh1 for DecimalType
2020-01-01 14:49:48.026 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Updating node properties. MAN=271
2020-01-01 14:49:48.026 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 43: SECURITY not supported
2020-01-01 14:49:48.028 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 43: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.028 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.028 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:scene_number for DecimalType
2020-01-01 14:49:48.029 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 43: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1c770c2
2020-01-01 14:49:48.029 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:meter_kwh1 for DecimalType
2020-01-01 14:49:48.029 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:scene_number for DecimalType
2020-01-01 14:49:48.030 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:meter_watts1 for DecimalType
2020-01-01 14:49:48.030 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:sensor_power for DecimalType
2020-01-01 14:49:48.031 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:meter_watts1 for DecimalType
2020-01-01 14:49:48.031 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.028 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:sensor_power1 for DecimalType
2020-01-01 14:49:48.028 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.032 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_general1 for OnOffType
2020-01-01 14:49:48.032 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 43: Adding to device queue
2020-01-01 14:49:48.034 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_general1 for OnOffType
2020-01-01 14:49:48.034 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 43: Added 3682 to queue - size 7
2020-01-01 14:49:48.034 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:sensor_power1 for DecimalType
2020-01-01 14:49:48.035 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:notification_send1 for DecimalType
2020-01-01 14:49:48.035 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.035 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:meter_kwh1 for DecimalType
2020-01-01 14:49:48.035 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:notification_send1 for DecimalType
2020-01-01 14:49:48.033 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3632: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.036 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:sensor_power for DecimalType
2020-01-01 14:49:48.037 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Updating node properties.
2020-01-01 14:49:48.037 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:meter_kwh for DecimalType
2020-01-01 14:49:48.038 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.038 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:meter_kwh for DecimalType
2020-01-01 14:49:48.031 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Properties synchronised
2020-01-01 14:49:48.039 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3632: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.040 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:meter_watts for DecimalType
2020-01-01 14:49:48.041 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.042 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:meter_watts for DecimalType
2020-01-01 14:49:48.042 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: ProtocolInfo
2020-01-01 14:49:48.043 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_system1 for OnOffType
2020-01-01 14:49:48.036 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:meter_kwh1 for DecimalType
2020-01-01 14:49:48.044 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Listening = true
2020-01-01 14:49:48.044 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Routing   = true
2020-01-01 14:49:48.045 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:meter_watts1 for DecimalType
2020-01-01 14:49:48.045 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Beaming   = true
2020-01-01 14:49:48.046 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:meter_watts1 for DecimalType
2020-01-01 14:49:48.046 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Version   = 4
2020-01-01 14:49:48.038 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Updating node properties. MAN=271
2020-01-01 14:49:48.047 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.048 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_general1 for OnOffType
2020-01-01 14:49:48.049 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Properties synchronised
2020-01-01 14:49:48.044 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_system1 for OnOffType
2020-01-01 14:49:48.049 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_general1 for OnOffType
2020-01-01 14:49:48.049 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: FLIRS     = false
2020-01-01 14:49:48.050 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_power1 for OnOffType
2020-01-01 14:49:48.050 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:notification_send1 for DecimalType
2020-01-01 14:49:48.043 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:meter_reset for OnOffType
2020-01-01 14:49:48.051 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_power1 for OnOffType
2020-01-01 14:49:48.051 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:alarm_heat1 for OnOffType
2020-01-01 14:49:48.051 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:meter_reset for OnOffType
2020-01-01 14:49:48.050 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Security  = false
2020-01-01 14:49:48.051 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.052 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:alarm_heat1 for OnOffType
2020-01-01 14:49:48.053 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Max Baud  = 40000
2020-01-01 14:49:48.053 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.053 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.054 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.054 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising cmd channel zwave:device:9412cbc8:node12:switch_dimmer2 for PercentType
2020-01-01 14:49:48.055 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.055 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:switch_dimmer2 for PercentType
2020-01-01 14:49:48.055 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_general for OnOffType
2020-01-01 14:49:48.055 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.056 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising Thing Node...
2020-01-01 14:49:48.056 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Initialising state channel zwave:device:9412cbc8:node12:switch_dimmer2 for PercentType
2020-01-01 14:49:48.056 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Generic  = GENERIC_TYPE_SENSOR_BINARY
2020-01-01 14:49:48.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:scene_number for DecimalType
2020-01-01 14:49:48.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Polling initialised at 86400 seconds - start in 35769600 milliseconds.
2020-01-01 14:49:48.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:notification_send1 for DecimalType
2020-01-01 14:49:48.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Device initialisation complete.
2020-01-01 14:49:48.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:scene_number for DecimalType
2020-01-01 14:49:48.058 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_system1 for OnOffType
2020-01-01 14:49:48.058 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Controller status changed to ONLINE.
2020-01-01 14:49:48.057 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 57: Specific = SPECIFIC_TYPE_ROUTING_SENSOR_BINARY
2020-01-01 14:49:48.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_general for OnOffType
2020-01-01 14:49:48.059 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.059 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 57: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:sensor_power for DecimalType
2020-01-01 14:49:48.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_system for OnOffType
2020-01-01 14:49:48.060 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 57: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.059 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_system1 for OnOffType
2020-01-01 14:49:48.061 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_system for OnOffType
2020-01-01 14:49:48.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:sensor_power for DecimalType
2020-01-01 14:49:48.063 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_power for OnOffType
2020-01-01 14:49:48.063 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:meter_kwh for DecimalType
2020-01-01 14:49:48.064 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_power for OnOffType
2020-01-01 14:49:48.064 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Updating node properties.
2020-01-01 14:49:48.062 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_power1 for OnOffType
2020-01-01 14:49:48.064 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_power1 for OnOffType
2020-01-01 14:49:48.065 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_heat for OnOffType
2020-01-01 14:49:48.066 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:alarm_heat1 for OnOffType
2020-01-01 14:49:48.066 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_heat for OnOffType
2020-01-01 14:49:48.067 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:alarm_heat1 for OnOffType
2020-01-01 14:49:48.068 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.068 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.069 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Updating node properties. MAN=271
2020-01-01 14:49:48.069 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:switch_dimmer1 for PercentType
2020-01-01 14:49:48.069 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.070 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.070 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:switch_dimmer1 for PercentType
2020-01-01 14:49:48.071 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Properties synchronised
2020-01-01 14:49:48.063 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 57: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.071 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 57: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.072 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:switch_dimmer1 for PercentType
2020-01-01 14:49:48.072 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 57: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.072 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:sensor_power1 for DecimalType
2020-01-01 14:49:48.073 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 57: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.073 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 57: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.071 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.074 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3632: Transaction COMPLETED
2020-01-01 14:49:48.073 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:sensor_power1 for DecimalType
2020-01-01 14:49:48.071 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:meter_kwh for DecimalType
2020-01-01 14:49:48.075 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 68ms
2020-01-01 14:49:48.075 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:meter_kwh1 for DecimalType
2020-01-01 14:49:48.075 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3632: Transaction completed
2020-01-01 14:49:48.075 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:meter_kwh1 for DecimalType
2020-01-01 14:49:48.076 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3632 DONE
2020-01-01 14:49:48.076 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:meter_watts1 for DecimalType
2020-01-01 14:49:48.077 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising cmd channel zwave:device:9412cbc8:node22:switch_dimmer2 for PercentType
2020-01-01 14:49:48.074 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising Thing Node...
2020-01-01 14:49:48.078 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:scene_number for DecimalType
2020-01-01 14:49:48.078 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:meter_watts1 for DecimalType
2020-01-01 14:49:48.078 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:scene_number for DecimalType
2020-01-01 14:49:48.079 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:sensor_power for DecimalType
2020-01-01 14:49:48.079 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_general1 for OnOffType
2020-01-01 14:49:48.080 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:sensor_power for DecimalType
2020-01-01 14:49:48.081 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:meter_kwh for DecimalType
2020-01-01 14:49:48.082 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:meter_kwh for DecimalType
2020-01-01 14:49:48.083 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:meter_watts for DecimalType
2020-01-01 14:49:48.083 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:meter_watts for DecimalType
2020-01-01 14:49:48.084 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:meter_reset for OnOffType
2020-01-01 14:49:48.085 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:meter_reset for OnOffType
2020-01-01 14:49:48.075 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:meter_watts for DecimalType
2020-01-01 14:49:48.083 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.086 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:switch_dimmer2 for PercentType
2020-01-01 14:49:48.086 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:meter_watts for DecimalType
2020-01-01 14:49:48.086 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_general1 for OnOffType
2020-01-01 14:49:48.087 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Initialising state channel zwave:device:9412cbc8:node22:switch_dimmer2 for PercentType
2020-01-01 14:49:48.087 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:meter_reset for OnOffType
2020-01-01 14:49:48.087 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:notification_send1 for DecimalType
2020-01-01 14:49:48.087 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.088 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:notification_send1 for DecimalType
2020-01-01 14:49:48.088 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:meter_reset for OnOffType
2020-01-01 14:49:48.088 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Polling initialised at 86400 seconds - start in 35769600 milliseconds.
2020-01-01 14:49:48.089 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising Thing Node...
2020-01-01 14:49:48.089 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.089 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Device initialisation complete.
2020-01-01 14:49:48.090 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.091 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.091 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:scene_number for DecimalType
2020-01-01 14:49:48.092 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Controller status changed to ONLINE.
2020-01-01 14:49:48.092 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.092 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.093 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:scene_number for DecimalType
2020-01-01 14:49:48.093 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 33 89 
2020-01-01 14:49:48.094 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 33 89 
2020-01-01 14:49:48.095 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:sensor_power for DecimalType
2020-01-01 14:49:48.096 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_general for OnOffType
2020-01-01 14:49:48.096 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.097 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.097 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_general for OnOffType
2020-01-01 14:49:48.102 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_system for OnOffType
2020-01-01 14:49:48.103 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_system for OnOffType
2020-01-01 14:49:48.105 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_power for OnOffType
2020-01-01 14:49:48.099 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:48.096 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Updating node properties.
2020-01-01 14:49:48.107 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3632: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.108 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Updating node properties. MAN=271
2020-01-01 14:49:48.089 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_system1 for OnOffType
2020-01-01 14:49:48.106 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_power for OnOffType
2020-01-01 14:49:48.109 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 57: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@18f9528
2020-01-01 14:49:48.109 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_system1 for OnOffType
2020-01-01 14:49:48.110 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 57: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.110 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_heat for OnOffType
2020-01-01 14:49:48.110 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 57: Node advancer - advancing to PING
2020-01-01 14:49:48.111 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_heat for OnOffType
2020-01-01 14:49:48.111 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 57: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:48.112 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.112 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:sensor_power for DecimalType
2020-01-01 14:49:48.110 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_power1 for OnOffType
2020-01-01 14:49:48.113 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 57: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.108 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.114 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 57: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.114 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3633: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.115 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 57: SECURITY not supported
2020-01-01 14:49:48.115 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.115 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 57: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.115 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.116 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3633: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.117 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.118 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.109 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.119 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3633: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.113 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:switch_dimmer1 for PercentType
2020-01-01 14:49:48.120 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.121 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_general for OnOffType
2020-01-01 14:49:48.120 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:switch_dimmer1 for PercentType
2020-01-01 14:49:48.120 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.121 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_general for OnOffType
2020-01-01 14:49:48.121 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3633: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.117 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:meter_kwh for DecimalType
2020-01-01 14:49:48.114 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_power1 for OnOffType
2020-01-01 14:49:48.123 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 57: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@8d1bfd
2020-01-01 14:49:48.123 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:meter_kwh for DecimalType
2020-01-01 14:49:48.123 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.124 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_system for OnOffType
2020-01-01 14:49:48.125 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Properties synchronised
2020-01-01 14:49:48.125 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_system for OnOffType
2020-01-01 14:49:48.126 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:switch_dimmer1 for PercentType
2020-01-01 14:49:48.126 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_power for OnOffType
2020-01-01 14:49:48.127 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 57: Adding to device queue
2020-01-01 14:49:48.128 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 57: Added 3683 to queue - size 8
2020-01-01 14:49:48.123 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:alarm_heat1 for OnOffType
2020-01-01 14:49:48.128 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.128 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:alarm_heat1 for OnOffType
2020-01-01 14:49:48.129 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:meter_watts for DecimalType
2020-01-01 14:49:48.129 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:meter_watts for DecimalType
2020-01-01 14:49:48.130 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.130 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:meter_reset for OnOffType
2020-01-01 14:49:48.131 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: ProtocolInfo
2020-01-01 14:49:48.131 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:meter_reset for OnOffType
2020-01-01 14:49:48.132 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.133 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Listening = true
2020-01-01 14:49:48.133 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.134 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Routing   = true
2020-01-01 14:49:48.134 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_general for OnOffType
2020-01-01 14:49:48.135 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Beaming   = true
2020-01-01 14:49:48.135 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_general for OnOffType
2020-01-01 14:49:48.137 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Version   = 4
2020-01-01 14:49:48.138 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: FLIRS     = false
2020-01-01 14:49:48.139 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Security  = false
2020-01-01 14:49:48.140 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Max Baud  = 40000
2020-01-01 14:49:48.142 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.143 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:48.144 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 51: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:48.145 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 51: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.128 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:sensor_power1 for DecimalType
2020-01-01 14:49:48.146 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_power for OnOffType
2020-01-01 14:49:48.146 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:sensor_power1 for DecimalType
2020-01-01 14:49:48.147 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 51: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_heat for OnOffType
2020-01-01 14:49:48.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.146 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.148 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 51: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.148 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_heat for OnOffType
2020-01-01 14:49:48.149 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_system for OnOffType
2020-01-01 14:49:48.149 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_system for OnOffType
2020-01-01 14:49:48.149 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:meter_kwh1 for DecimalType
2020-01-01 14:49:48.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising cmd channel zwave:device:9412cbc8:node25:switch_dimmer2 for PercentType
2020-01-01 14:49:48.150 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 51: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:meter_kwh1 for DecimalType
2020-01-01 14:49:48.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_power for OnOffType
2020-01-01 14:49:48.151 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_power for OnOffType
2020-01-01 14:49:48.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:meter_watts1 for DecimalType
2020-01-01 14:49:48.151 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 51: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising Thing Node...
2020-01-01 14:49:48.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:meter_watts1 for DecimalType
2020-01-01 14:49:48.152 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_heat for OnOffType
2020-01-01 14:49:48.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:switch_dimmer2 for PercentType
2020-01-01 14:49:48.152 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_heat for OnOffType
2020-01-01 14:49:48.152 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Initialising state channel zwave:device:9412cbc8:node25:switch_dimmer2 for PercentType
2020-01-01 14:49:48.152 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_general1 for OnOffType
2020-01-01 14:49:48.153 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 51: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.153 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_general1 for OnOffType
2020-01-01 14:49:48.153 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Polling initialised at 86400 seconds - start in 15897600 milliseconds.
2020-01-01 14:49:48.153 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.154 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Device initialisation complete.
2020-01-01 14:49:48.154 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:notification_send1 for DecimalType
2020-01-01 14:49:48.154 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:switch_dimmer1 for PercentType
2020-01-01 14:49:48.154 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 51: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.154 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Controller status changed to ONLINE.
2020-01-01 14:49:48.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:notification_send1 for DecimalType
2020-01-01 14:49:48.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:switch_dimmer1 for PercentType
2020-01-01 14:49:48.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_system1 for OnOffType
2020-01-01 14:49:48.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:switch_dimmer1 for PercentType
2020-01-01 14:49:48.156 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3633: Transaction COMPLETED
2020-01-01 14:49:48.156 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_system1 for OnOffType
2020-01-01 14:49:48.156 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:sensor_power1 for DecimalType
2020-01-01 14:49:48.157 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_power1 for OnOffType
2020-01-01 14:49:48.157 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:sensor_power1 for DecimalType
2020-01-01 14:49:48.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Updating node properties.
2020-01-01 14:49:48.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_power1 for OnOffType
2020-01-01 14:49:48.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:meter_kwh1 for DecimalType
2020-01-01 14:49:48.159 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 43ms
2020-01-01 14:49:48.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Updating node properties. MAN=280
2020-01-01 14:49:48.159 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:meter_kwh1 for DecimalType
2020-01-01 14:49:48.160 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Updating node properties. MAN=280. SET. Was 280
2020-01-01 14:49:48.160 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:meter_watts1 for DecimalType
2020-01-01 14:49:48.161 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3633: Transaction completed
2020-01-01 14:49:48.162 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:meter_watts1 for DecimalType
2020-01-01 14:49:48.163 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:scene_number for DecimalType
2020-01-01 14:49:48.163 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:scene_number for DecimalType
2020-01-01 14:49:48.163 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:switch_dimmer1 for PercentType
2020-01-01 14:49:48.163 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_general1 for OnOffType
2020-01-01 14:49:48.164 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3633 DONE
2020-01-01 14:49:48.159 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:alarm_heat1 for OnOffType
2020-01-01 14:49:48.164 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:alarm_heat1 for OnOffType
2020-01-01 14:49:48.165 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:sensor_power for DecimalType
2020-01-01 14:49:48.165 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.166 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_general1 for OnOffType
2020-01-01 14:49:48.166 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:switch_dimmer1 for PercentType
2020-01-01 14:49:48.167 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.167 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:notification_send1 for DecimalType
2020-01-01 14:49:48.168 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:notification_send1 for DecimalType
2020-01-01 14:49:48.168 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 47 FD 
2020-01-01 14:49:48.165 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.165 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3633: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.165 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:sensor_power for DecimalType
2020-01-01 14:49:48.169 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_system1 for OnOffType
2020-01-01 14:49:48.170 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising cmd channel zwave:device:9412cbc8:node26:switch_dimmer2 for PercentType
2020-01-01 14:49:48.170 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:meter_kwh for DecimalType
2020-01-01 14:49:48.170 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:switch_dimmer2 for PercentType
2020-01-01 14:49:48.170 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 47 FD 
2020-01-01 14:49:48.171 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Initialising state channel zwave:device:9412cbc8:node26:switch_dimmer2 for PercentType
2020-01-01 14:49:48.172 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Polling initialised at 1800 seconds - start in 228600 milliseconds.
2020-01-01 14:49:48.172 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Device initialisation complete.
2020-01-01 14:49:48.173 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Controller status changed to ONLINE.
2020-01-01 14:49:48.173 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.166 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Properties synchronised
2020-01-01 14:49:48.176 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.177 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.178 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.178 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:switch_dimmer1 for PercentType
2020-01-01 14:49:48.178 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising Thing Node...
2020-01-01 14:49:48.179 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.179 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:sensor_power1 for DecimalType
2020-01-01 14:49:48.179 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.180 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:sensor_power1 for DecimalType
2020-01-01 14:49:48.180 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:meter_kwh1 for DecimalType
2020-01-01 14:49:48.181 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 0F 01 F2 
2020-01-01 14:49:48.181 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:meter_kwh1 for DecimalType
2020-01-01 14:49:48.182 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:meter_watts1 for DecimalType
2020-01-01 14:49:48.183 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:meter_watts1 for DecimalType
2020-01-01 14:49:48.183 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.184 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_general1 for OnOffType
2020-01-01 14:49:48.169 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_system1 for OnOffType
2020-01-01 14:49:48.186 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:meter_kwh for DecimalType
2020-01-01 14:49:48.186 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_power1 for OnOffType
2020-01-01 14:49:48.187 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:meter_watts for DecimalType
2020-01-01 14:49:48.187 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_power1 for OnOffType
2020-01-01 14:49:48.188 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:meter_watts for DecimalType
2020-01-01 14:49:48.188 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:alarm_heat1 for OnOffType
2020-01-01 14:49:48.188 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:alarm_heat1 for OnOffType
2020-01-01 14:49:48.188 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:meter_reset for OnOffType
2020-01-01 14:49:48.185 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_general1 for OnOffType
2020-01-01 14:49:48.189 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 51: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@16c04c5
2020-01-01 14:49:48.189 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.190 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 51: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.190 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:notification_send1 for DecimalType
2020-01-01 14:49:48.191 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 51: Node advancer - advancing to PING
2020-01-01 14:49:48.191 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:notification_send1 for DecimalType
2020-01-01 14:49:48.191 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 51: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.192 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 51: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.186 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Updating node properties.
2020-01-01 14:49:48.197 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Updating node properties. MAN=271
2020-01-01 14:49:48.179 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising cmd channel zwave:device:9412cbc8:node29:switch_binary for OnOffType
2020-01-01 14:49:48.178 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3634: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.198 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.199 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.199 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Properties synchronised
2020-01-01 14:49:48.200 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3634: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.200 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising state channel zwave:device:9412cbc8:node29:switch_binary for OnOffType
2020-01-01 14:49:48.201 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.201 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising state channel zwave:device:9412cbc8:node29:switch_binary for OnOffType
2020-01-01 14:49:48.193 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 51: SECURITY not supported
2020-01-01 14:49:48.190 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising cmd channel zwave:device:9412cbc8:node28:switch_dimmer2 for PercentType
2020-01-01 14:49:48.203 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 51: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.203 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:switch_dimmer2 for PercentType
2020-01-01 14:49:48.191 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_system1 for OnOffType
2020-01-01 14:49:48.204 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 51: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@6e9a0c
2020-01-01 14:49:48.204 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_system1 for OnOffType
2020-01-01 14:49:48.194 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:meter_reset for OnOffType
2020-01-01 14:49:48.205 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Initialising state channel zwave:device:9412cbc8:node28:switch_dimmer2 for PercentType
2020-01-01 14:49:48.205 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.206 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.206 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 51: Adding to device queue
2020-01-01 14:49:48.206 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Polling initialised at 86400 seconds - start in 63849600 milliseconds.
2020-01-01 14:49:48.207 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3634: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.208 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_power1 for OnOffType
2020-01-01 14:49:48.206 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.208 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising cmd channel zwave:device:9412cbc8:node29:meter_kwh for DecimalType
2020-01-01 14:49:48.208 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 51: Added 3684 to queue - size 9
2020-01-01 14:49:48.209 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising state channel zwave:device:9412cbc8:node29:meter_kwh for DecimalType
2020-01-01 14:49:48.209 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.207 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Device initialisation complete.
2020-01-01 14:49:48.209 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_power1 for OnOffType
2020-01-01 14:49:48.210 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising cmd channel zwave:device:9412cbc8:node29:meter_current for DecimalType
2020-01-01 14:49:48.210 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Controller status changed to ONLINE.
2020-01-01 14:49:48.210 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising state channel zwave:device:9412cbc8:node29:meter_current for DecimalType
2020-01-01 14:49:48.210 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.210 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:alarm_heat1 for OnOffType
2020-01-01 14:49:48.211 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising cmd channel zwave:device:9412cbc8:node29:meter_powerfactor for DecimalType
2020-01-01 14:49:48.211 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:alarm_heat1 for OnOffType
2020-01-01 14:49:48.211 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising state channel zwave:device:9412cbc8:node29:meter_powerfactor for DecimalType
2020-01-01 14:49:48.212 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Updating node properties.
2020-01-01 14:49:48.213 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.213 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Updating node properties. MAN=271
2020-01-01 14:49:48.214 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising cmd channel zwave:device:9412cbc8:node27:switch_dimmer2 for PercentType
2020-01-01 14:49:48.214 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.215 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Properties synchronised
2020-01-01 14:49:48.215 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:switch_dimmer2 for PercentType
2020-01-01 14:49:48.215 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_general for OnOffType
2020-01-01 14:49:48.216 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising cmd channel zwave:device:9412cbc8:node29:meter_watts for DecimalType
2020-01-01 14:49:48.216 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_general for OnOffType
2020-01-01 14:49:48.217 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Initialising state channel zwave:device:9412cbc8:node27:switch_dimmer2 for PercentType
2020-01-01 14:49:48.217 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_system for OnOffType
2020-01-01 14:49:48.218 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Polling initialised at 86400 seconds - start in 75772800 milliseconds.
2020-01-01 14:49:48.218 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_system for OnOffType
2020-01-01 14:49:48.219 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Device initialisation complete.
2020-01-01 14:49:48.219 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising state channel zwave:device:9412cbc8:node29:meter_watts for DecimalType
2020-01-01 14:49:48.221 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Controller status changed to ONLINE.
2020-01-01 14:49:48.222 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.223 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_power for OnOffType
2020-01-01 14:49:48.223 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising cmd channel zwave:device:9412cbc8:node29:meter_voltage for DecimalType
2020-01-01 14:49:48.226 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.226 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Updating node properties.
2020-01-01 14:49:48.227 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3634: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.227 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.227 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Updating node properties. MAN=271
2020-01-01 14:49:48.228 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.227 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.229 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: ProtocolInfo
2020-01-01 14:49:48.229 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Properties synchronised
2020-01-01 14:49:48.225 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Initialising state channel zwave:device:9412cbc8:node29:meter_voltage for DecimalType
2020-01-01 14:49:48.230 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Listening = true
2020-01-01 14:49:48.230 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Polling initialised at 86400 seconds - start in 33955200 milliseconds.
2020-01-01 14:49:48.231 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 29: Device initialisation complete.
2020-01-01 14:49:48.228 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.232 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Controller status changed to ONLINE.
2020-01-01 14:49:48.232 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising Thing Node...
2020-01-01 14:49:48.233 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.231 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Routing   = true
2020-01-01 14:49:48.229 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_power for OnOffType
2020-01-01 14:49:48.237 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Beaming   = true
2020-01-01 14:49:48.235 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.238 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Version   = 4
2020-01-01 14:49:48.238 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.239 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: FLIRS     = false
2020-01-01 14:49:48.239 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising Thing Node...
2020-01-01 14:49:48.239 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Security  = false
2020-01-01 14:49:48.240 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:scene_number for DecimalType
2020-01-01 14:49:48.240 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Max Baud  = 40000
2020-01-01 14:49:48.241 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:scene_number for DecimalType
2020-01-01 14:49:48.241 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.242 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Generic  = GENERIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.241 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Updating node properties.
2020-01-01 14:49:48.242 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 71: Specific = SPECIFIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.242 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:sensor_power for DecimalType
2020-01-01 14:49:48.237 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_heat for OnOffType
2020-01-01 14:49:48.245 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:scene_number for DecimalType
2020-01-01 14:49:48.246 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:sensor_power for DecimalType
2020-01-01 14:49:48.246 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_heat for OnOffType
2020-01-01 14:49:48.246 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:scene_number for DecimalType
2020-01-01 14:49:48.245 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Updating node properties. MAN=271
2020-01-01 14:49:48.247 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.247 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:sensor_power for DecimalType
2020-01-01 14:49:48.248 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:meter_kwh for DecimalType
2020-01-01 14:49:48.248 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:sensor_power for DecimalType
2020-01-01 14:49:48.248 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:switch_dimmer1 for PercentType
2020-01-01 14:49:48.248 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.249 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.249 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:switch_dimmer1 for PercentType
2020-01-01 14:49:48.249 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:meter_kwh for DecimalType
2020-01-01 14:49:48.249 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Properties synchronised
2020-01-01 14:49:48.250 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.250 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:switch_dimmer1 for PercentType
2020-01-01 14:49:48.245 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 71: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.250 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising Thing Node...
2020-01-01 14:49:48.251 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:scene_number for DecimalType
2020-01-01 14:49:48.252 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:sensor_power1 for DecimalType
2020-01-01 14:49:48.255 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:scene_number for DecimalType
2020-01-01 14:49:48.256 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:meter_kwh for DecimalType
2020-01-01 14:49:48.257 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:sensor_power for DecimalType
2020-01-01 14:49:48.257 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:sensor_power for DecimalType
2020-01-01 14:49:48.257 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:meter_watts for DecimalType
2020-01-01 14:49:48.250 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:meter_kwh for DecimalType
2020-01-01 14:49:48.322 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.322 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:meter_watts for DecimalType
2020-01-01 14:49:48.322 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:meter_kwh for DecimalType
2020-01-01 14:49:48.329 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:meter_watts for DecimalType
2020-01-01 14:49:48.329 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:meter_kwh for DecimalType
2020-01-01 14:49:48.251 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 71: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.330 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 71: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.329 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.329 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:sensor_power1 for DecimalType
2020-01-01 14:49:48.331 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:meter_watts for DecimalType
2020-01-01 14:49:48.332 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:meter_kwh1 for DecimalType
2020-01-01 14:49:48.331 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising Thing Node...
2020-01-01 14:49:48.332 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:meter_kwh1 for DecimalType
2020-01-01 14:49:48.332 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:meter_reset for OnOffType
2020-01-01 14:49:48.333 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:scene_number for DecimalType
2020-01-01 14:49:48.333 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:scene_number for DecimalType
2020-01-01 14:49:48.333 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:meter_watts for DecimalType
2020-01-01 14:49:48.331 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 71: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.334 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 71: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.335 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:sensor_power for DecimalType
2020-01-01 14:49:48.333 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:meter_watts1 for DecimalType
2020-01-01 14:49:48.335 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:sensor_power for DecimalType
2020-01-01 14:49:48.335 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:meter_reset for OnOffType
2020-01-01 14:49:48.336 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:meter_watts1 for DecimalType
2020-01-01 14:49:48.335 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:meter_reset for OnOffType
2020-01-01 14:49:48.336 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:meter_watts for DecimalType
2020-01-01 14:49:48.336 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_general1 for OnOffType
2020-01-01 14:49:48.336 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:meter_kwh for DecimalType
2020-01-01 14:49:48.337 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:meter_reset for OnOffType
2020-01-01 14:49:48.337 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 71: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.338 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 71: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.338 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:meter_reset for OnOffType
2020-01-01 14:49:48.338 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3634: Transaction COMPLETED
2020-01-01 14:49:48.339 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 161ms
2020-01-01 14:49:48.339 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3634: Transaction completed
2020-01-01 14:49:48.340 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3634 DONE
2020-01-01 14:49:48.341 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.342 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.341 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3634: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.343 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 4B F1 
2020-01-01 14:49:48.344 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.337 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_general1 for OnOffType
2020-01-01 14:49:48.346 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:meter_kwh for DecimalType
2020-01-01 14:49:48.343 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 71: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@14aaeed
2020-01-01 14:49:48.347 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 71: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.347 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:meter_watts for DecimalType
2020-01-01 14:49:48.348 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 71: Node advancer - advancing to PING
2020-01-01 14:49:48.348 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 71: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.349 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 71: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.350 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 71: SECURITY not supported
2020-01-01 14:49:48.350 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 71: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.351 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 71: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@482160
2020-01-01 14:49:48.344 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:meter_reset for OnOffType
2020-01-01 14:49:48.346 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:notification_send1 for DecimalType
2020-01-01 14:49:48.353 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:notification_send1 for DecimalType
2020-01-01 14:49:48.353 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.348 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:meter_watts for DecimalType
2020-01-01 14:49:48.355 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_system1 for OnOffType
2020-01-01 14:49:48.355 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:meter_reset for OnOffType
2020-01-01 14:49:48.354 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 4B F1 
2020-01-01 14:49:48.354 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.355 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.356 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.356 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_system1 for OnOffType
2020-01-01 14:49:48.356 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_general for OnOffType
2020-01-01 14:49:48.356 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:meter_reset for OnOffType
2020-01-01 14:49:48.357 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.357 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_power1 for OnOffType
2020-01-01 14:49:48.357 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_general for OnOffType
2020-01-01 14:49:48.358 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_power1 for OnOffType
2020-01-01 14:49:48.358 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.358 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_system for OnOffType
2020-01-01 14:49:48.358 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_general for OnOffType
2020-01-01 14:49:48.359 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_general for OnOffType
2020-01-01 14:49:48.359 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_system for OnOffType
2020-01-01 14:49:48.359 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.357 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.360 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3635: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.360 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_system for OnOffType
2020-01-01 14:49:48.359 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_general for OnOffType
2020-01-01 14:49:48.358 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:alarm_heat1 for OnOffType
2020-01-01 14:49:48.358 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.361 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.361 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:alarm_heat1 for OnOffType
2020-01-01 14:49:48.362 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 0F 01 F2 
2020-01-01 14:49:48.362 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.362 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_general for OnOffType
2020-01-01 14:49:48.364 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_system for OnOffType
2020-01-01 14:49:48.364 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:9412cbc8:node21:switch_dimmer2 for PercentType
2020-01-01 14:49:48.364 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_general for OnOffType
2020-01-01 14:49:48.365 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:switch_dimmer2 for PercentType
2020-01-01 14:49:48.365 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_power for OnOffType
2020-01-01 14:49:48.366 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_general for OnOffType
2020-01-01 14:49:48.366 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.366 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:9412cbc8:node21:switch_dimmer2 for PercentType
2020-01-01 14:49:48.367 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_system for OnOffType
2020-01-01 14:49:48.367 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_power for OnOffType
2020-01-01 14:49:48.368 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_heat for OnOffType
2020-01-01 14:49:48.368 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_system for OnOffType
2020-01-01 14:49:48.369 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_heat for OnOffType
2020-01-01 14:49:48.370 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_system for OnOffType
2020-01-01 14:49:48.371 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.372 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_system for OnOffType
2020-01-01 14:49:48.372 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:switch_dimmer1 for PercentType
2020-01-01 14:49:48.373 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_power for OnOffType
2020-01-01 14:49:48.373 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_power for OnOffType
2020-01-01 14:49:48.373 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_power for OnOffType
2020-01-01 14:49:48.374 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_heat for OnOffType
2020-01-01 14:49:48.375 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_heat for OnOffType
2020-01-01 14:49:48.367 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Polling initialised at 86400 seconds - start in 34041600 milliseconds.
2020-01-01 14:49:48.376 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.376 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Device initialisation complete.
2020-01-01 14:49:48.377 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 71: Adding to device queue
2020-01-01 14:49:48.377 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:switch_dimmer1 for PercentType
2020-01-01 14:49:48.377 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Controller status changed to ONLINE.
2020-01-01 14:49:48.378 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 71: Added 3685 to queue - size 10
2020-01-01 14:49:48.378 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.378 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_power for OnOffType
2020-01-01 14:49:48.378 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.377 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_power for OnOffType
2020-01-01 14:49:48.378 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_power for OnOffType
2020-01-01 14:49:48.378 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:switch_dimmer1 for PercentType
2020-01-01 14:49:48.379 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.380 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:switch_dimmer1 for PercentType
2020-01-01 14:49:48.381 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_heat for OnOffType
2020-01-01 14:49:48.381 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3635: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.382 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.379 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:switch_dimmer1 for PercentType
2020-01-01 14:49:48.382 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:sensor_power1 for DecimalType
2020-01-01 14:49:48.382 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_heat for OnOffType
2020-01-01 14:49:48.383 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_heat for OnOffType
2020-01-01 14:49:48.381 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Updating node properties.
2020-01-01 14:49:48.384 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.386 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:sensor_power1 for DecimalType
2020-01-01 14:49:48.386 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Updating node properties. MAN=271
2020-01-01 14:49:48.387 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3635: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.387 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_heat for OnOffType
2020-01-01 14:49:48.387 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:switch_dimmer1 for PercentType
2020-01-01 14:49:48.386 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.388 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.389 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Properties synchronised
2020-01-01 14:49:48.389 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:switch_dimmer1 for PercentType
2020-01-01 14:49:48.390 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:switch_dimmer1 for PercentType
2020-01-01 14:49:48.391 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:switch_dimmer1 for PercentType
2020-01-01 14:49:48.391 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:sensor_power1 for DecimalType
2020-01-01 14:49:48.392 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:sensor_power1 for DecimalType
2020-01-01 14:49:48.393 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:meter_kwh1 for DecimalType
2020-01-01 14:49:48.394 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:meter_kwh1 for DecimalType
2020-01-01 14:49:48.394 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:meter_watts1 for DecimalType
2020-01-01 14:49:48.395 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:meter_watts1 for DecimalType
2020-01-01 14:49:48.387 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.388 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:sensor_power1 for DecimalType
2020-01-01 14:49:48.387 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:meter_kwh1 for DecimalType
2020-01-01 14:49:48.397 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.397 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:sensor_power1 for DecimalType
2020-01-01 14:49:48.398 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3635: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.398 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:switch_dimmer1 for PercentType
2020-01-01 14:49:48.399 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:meter_kwh1 for DecimalType
2020-01-01 14:49:48.399 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:switch_dimmer1 for PercentType
2020-01-01 14:49:48.399 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:meter_kwh1 for DecimalType
2020-01-01 14:49:48.399 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.400 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.400 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:meter_watts1 for DecimalType
2020-01-01 14:49:48.397 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:meter_kwh1 for DecimalType
2020-01-01 14:49:48.401 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:switch_dimmer1 for PercentType
2020-01-01 14:49:48.401 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising Thing Node...
2020-01-01 14:49:48.401 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:meter_watts1 for DecimalType
2020-01-01 14:49:48.401 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:sensor_power1 for DecimalType
2020-01-01 14:49:48.402 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:meter_watts1 for DecimalType
2020-01-01 14:49:48.403 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_general1 for OnOffType
2020-01-01 14:49:48.403 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_general1 for OnOffType
2020-01-01 14:49:48.404 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:notification_send1 for DecimalType
2020-01-01 14:49:48.405 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:notification_send1 for DecimalType
2020-01-01 14:49:48.406 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_system1 for OnOffType
2020-01-01 14:49:48.406 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_system1 for OnOffType
2020-01-01 14:49:48.407 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_power1 for OnOffType
2020-01-01 14:49:48.408 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_power1 for OnOffType
2020-01-01 14:49:48.409 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:alarm_heat1 for OnOffType
2020-01-01 14:49:48.409 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:alarm_heat1 for OnOffType
2020-01-01 14:49:48.410 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.411 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising cmd channel zwave:device:9412cbc8:node35:switch_dimmer2 for PercentType
2020-01-01 14:49:48.412 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:switch_dimmer2 for PercentType
2020-01-01 14:49:48.413 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Initialising state channel zwave:device:9412cbc8:node35:switch_dimmer2 for PercentType
2020-01-01 14:49:48.413 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Polling initialised at 86400 seconds - start in 59097600 milliseconds.
2020-01-01 14:49:48.414 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Device initialisation complete.
2020-01-01 14:49:48.414 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Controller status changed to ONLINE.
2020-01-01 14:49:48.415 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.403 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:sensor_power1 for DecimalType
2020-01-01 14:49:48.402 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:scene_number for DecimalType
2020-01-01 14:49:48.416 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:scene_number for DecimalType
2020-01-01 14:49:48.416 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:meter_watts1 for DecimalType
2020-01-01 14:49:48.417 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.417 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:meter_kwh1 for DecimalType
2020-01-01 14:49:48.417 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: ProtocolInfo
2020-01-01 14:49:48.396 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_general1 for OnOffType
2020-01-01 14:49:48.417 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_general1 for OnOffType
2020-01-01 14:49:48.417 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:sensor_power for DecimalType
2020-01-01 14:49:48.417 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:meter_kwh1 for DecimalType
2020-01-01 14:49:48.418 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Listening = true
2020-01-01 14:49:48.419 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_general1 for OnOffType
2020-01-01 14:49:48.419 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:sensor_power for DecimalType
2020-01-01 14:49:48.419 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Routing   = true
2020-01-01 14:49:48.419 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Beaming   = true
2020-01-01 14:49:48.420 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:notification_send1 for DecimalType
2020-01-01 14:49:48.420 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:meter_watts1 for DecimalType
2020-01-01 14:49:48.420 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Version   = 4
2020-01-01 14:49:48.421 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_general1 for OnOffType
2020-01-01 14:49:48.421 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: FLIRS     = false
2020-01-01 14:49:48.422 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Security  = false
2020-01-01 14:49:48.420 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:notification_send1 for DecimalType
2020-01-01 14:49:48.423 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Max Baud  = 40000
2020-01-01 14:49:48.423 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_system1 for OnOffType
2020-01-01 14:49:48.424 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.422 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:notification_send1 for DecimalType
2020-01-01 14:49:48.422 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:meter_watts1 for DecimalType
2020-01-01 14:49:48.424 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Generic  = GENERIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.424 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_system1 for OnOffType
2020-01-01 14:49:48.420 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:meter_kwh for DecimalType
2020-01-01 14:49:48.425 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 75: Specific = SPECIFIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.425 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_power1 for OnOffType
2020-01-01 14:49:48.426 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 75: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.426 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_power1 for OnOffType
2020-01-01 14:49:48.424 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:notification_send1 for DecimalType
2020-01-01 14:49:48.427 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_system1 for OnOffType
2020-01-01 14:49:48.427 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 75: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.428 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Updating node properties.
2020-01-01 14:49:48.425 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_general1 for OnOffType
2020-01-01 14:49:48.432 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Updating node properties. MAN=271
2020-01-01 14:49:48.432 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 75: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.425 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:meter_kwh for DecimalType
2020-01-01 14:49:48.432 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_system1 for OnOffType
2020-01-01 14:49:48.432 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:alarm_heat1 for OnOffType
2020-01-01 14:49:48.432 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_general1 for OnOffType
2020-01-01 14:49:48.434 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:alarm_heat1 for OnOffType
2020-01-01 14:49:48.434 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:meter_watts for DecimalType
2020-01-01 14:49:48.434 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 75: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.434 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_power1 for OnOffType
2020-01-01 14:49:48.435 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 75: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.435 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_power1 for OnOffType
2020-01-01 14:49:48.434 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:notification_send1 for DecimalType
2020-01-01 14:49:48.435 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.436 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:alarm_heat1 for OnOffType
2020-01-01 14:49:48.436 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:notification_send1 for DecimalType
2020-01-01 14:49:48.434 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:meter_watts for DecimalType
2020-01-01 14:49:48.437 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:alarm_heat1 for OnOffType
2020-01-01 14:49:48.437 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:meter_reset for OnOffType
2020-01-01 14:49:48.437 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_system1 for OnOffType
2020-01-01 14:49:48.436 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 75: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.438 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.438 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:meter_reset for OnOffType
2020-01-01 14:49:48.438 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_system1 for OnOffType
2020-01-01 14:49:48.438 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 75: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.439 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3635: Transaction COMPLETED
2020-01-01 14:49:48.439 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Properties synchronised
2020-01-01 14:49:48.437 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.440 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 80ms
2020-01-01 14:49:48.439 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising cmd channel zwave:device:9412cbc8:node40:switch_dimmer2 for PercentType
2020-01-01 14:49:48.440 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3635: Transaction completed
2020-01-01 14:49:48.440 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising cmd channel zwave:device:9412cbc8:node37:switch_dimmer2 for PercentType
2020-01-01 14:49:48.440 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.441 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3635 DONE
2020-01-01 14:49:48.440 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:switch_dimmer2 for PercentType
2020-01-01 14:49:48.442 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Initialising state channel zwave:device:9412cbc8:node40:switch_dimmer2 for PercentType
2020-01-01 14:49:48.443 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Polling initialised at 86400 seconds - start in 84153600 milliseconds.
2020-01-01 14:49:48.443 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Device initialisation complete.
2020-01-01 14:49:48.444 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Controller status changed to ONLINE.
2020-01-01 14:49:48.445 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.440 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_power1 for OnOffType
2020-01-01 14:49:48.441 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:switch_dimmer2 for PercentType
2020-01-01 14:49:48.446 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_power1 for OnOffType
2020-01-01 14:49:48.447 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Updating node properties.
2020-01-01 14:49:48.447 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:alarm_heat1 for OnOffType
2020-01-01 14:49:48.448 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Updating node properties. MAN=271
2020-01-01 14:49:48.448 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:alarm_heat1 for OnOffType
2020-01-01 14:49:48.449 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.449 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.449 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Properties synchronised
2020-01-01 14:49:48.450 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising cmd channel zwave:device:9412cbc8:node39:switch_dimmer2 for PercentType
2020-01-01 14:49:48.451 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:switch_dimmer2 for PercentType
2020-01-01 14:49:48.451 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Update ASSOCIATION group_ZWaveAssociationGroup [index=3, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.451 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.452 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Initialising state channel zwave:device:9412cbc8:node39:switch_dimmer2 for PercentType
2020-01-01 14:49:48.452 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.452 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising Thing Node...
2020-01-01 14:49:48.452 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Polling initialised at 86400 seconds - start in 46396800 milliseconds.
2020-01-01 14:49:48.454 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Initialising state channel zwave:device:9412cbc8:node37:switch_dimmer2 for PercentType
2020-01-01 14:49:48.455 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Polling initialised at 86400 seconds - start in 53481600 milliseconds.
2020-01-01 14:49:48.456 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Device initialisation complete.
2020-01-01 14:49:48.453 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.453 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:scene_number for DecimalType
2020-01-01 14:49:48.457 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Controller status changed to ONLINE.
2020-01-01 14:49:48.457 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:scene_number for DecimalType
2020-01-01 14:49:48.452 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.457 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_general for OnOffType
2020-01-01 14:49:48.454 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Device initialisation complete.
2020-01-01 14:49:48.458 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_general for OnOffType
2020-01-01 14:49:48.458 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:sensor_binary1 for OnOffType
2020-01-01 14:49:48.458 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Controller status changed to ONLINE.
2020-01-01 14:49:48.459 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_binary1 for OnOffType
2020-01-01 14:49:48.460 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.461 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_binary1 for OnOffType
2020-01-01 14:49:48.462 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:alarm_general1 for OnOffType
2020-01-01 14:49:48.462 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_system for OnOffType
2020-01-01 14:49:48.463 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:alarm_general1 for OnOffType
2020-01-01 14:49:48.463 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_system for OnOffType
2020-01-01 14:49:48.464 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Updating node properties.
2020-01-01 14:49:48.464 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_power for OnOffType
2020-01-01 14:49:48.464 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:sensor_binary2 for OnOffType
2020-01-01 14:49:48.465 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Updating node properties. MAN=271
2020-01-01 14:49:48.465 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_binary2 for OnOffType
2020-01-01 14:49:48.465 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_power for OnOffType
2020-01-01 14:49:48.467 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising Thing Node...
2020-01-01 14:49:48.471 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.471 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:scene_number for DecimalType
2020-01-01 14:49:48.471 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.472 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:scene_number for DecimalType
2020-01-01 14:49:48.472 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.472 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 2C 96 
2020-01-01 14:49:48.473 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 2C 96 
2020-01-01 14:49:48.473 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:sensor_power for DecimalType
2020-01-01 14:49:48.474 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_binary2 for OnOffType
2020-01-01 14:49:48.474 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.475 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.475 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:alarm_general2 for OnOffType
2020-01-01 14:49:48.476 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.473 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Properties synchronised
2020-01-01 14:49:48.471 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3635: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.471 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_heat for OnOffType
2020-01-01 14:49:48.477 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.476 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:alarm_general2 for OnOffType
2020-01-01 14:49:48.478 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_heat for OnOffType
2020-01-01 14:49:48.478 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:sensor_temperature3 for QuantityType
2020-01-01 14:49:48.478 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 00 04 20 01 DC 
2020-01-01 14:49:48.479 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_temperature3 for QuantityType
2020-01-01 14:49:48.475 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3636: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.479 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:sensor_temperature4 for QuantityType
2020-01-01 14:49:48.479 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.480 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.480 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_temperature4 for QuantityType
2020-01-01 14:49:48.481 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 75: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1231926
2020-01-01 14:49:48.481 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:sensor_temperature5 for QuantityType
2020-01-01 14:49:48.482 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 75: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.482 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Updating node properties.
2020-01-01 14:49:48.482 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 75: Node advancer - advancing to PING
2020-01-01 14:49:48.483 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Updating node properties. MAN=271
2020-01-01 14:49:48.483 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 75: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.483 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.484 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 75: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.485 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 75: SECURITY not supported
2020-01-01 14:49:48.485 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 75: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.477 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:sensor_power for DecimalType
2020-01-01 14:49:48.489 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:meter_kwh for DecimalType
2020-01-01 14:49:48.486 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 75: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@219ee6
2020-01-01 14:49:48.490 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:meter_kwh for DecimalType
2020-01-01 14:49:48.491 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:switch_dimmer1 for PercentType
2020-01-01 14:49:48.491 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:meter_watts for DecimalType
2020-01-01 14:49:48.492 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:switch_dimmer1 for PercentType
2020-01-01 14:49:48.492 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:meter_watts for DecimalType
2020-01-01 14:49:48.492 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:switch_dimmer1 for PercentType
2020-01-01 14:49:48.492 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:meter_reset for OnOffType
2020-01-01 14:49:48.494 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.482 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_temperature5 for QuantityType
2020-01-01 14:49:48.495 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 75: Adding to device queue
2020-01-01 14:49:48.495 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:sensor_power1 for DecimalType
2020-01-01 14:49:48.497 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3636: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.497 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 75: Added 3686 to queue - size 11
2020-01-01 14:49:48.499 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:sensor_power1 for DecimalType
2020-01-01 14:49:48.499 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.500 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:meter_kwh1 for DecimalType
2020-01-01 14:49:48.500 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:meter_reset for OnOffType
2020-01-01 14:49:48.500 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising cmd channel zwave:device:9412cbc8:node46:sensor_temperature6 for QuantityType
2020-01-01 14:49:48.502 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Initialising state channel zwave:device:9412cbc8:node46:sensor_temperature6 for QuantityType
2020-01-01 14:49:48.502 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Properties synchronised
2020-01-01 14:49:48.503 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.501 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:meter_kwh1 for DecimalType
2020-01-01 14:49:48.503 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.504 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.504 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.505 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3636: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.505 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.506 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3636: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.506 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_general for OnOffType
2020-01-01 14:49:48.503 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Polling initialised at 1800 seconds - start in 457200 milliseconds.
2020-01-01 14:49:48.507 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.507 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Device initialisation complete.
2020-01-01 14:49:48.508 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Update ASSOCIATION group_ZWaveAssociationGroup [index=3, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.509 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_general for OnOffType
2020-01-01 14:49:48.509 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.509 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Controller status changed to ONLINE.
2020-01-01 14:49:48.510 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.510 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_system for OnOffType
2020-01-01 14:49:48.510 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:meter_watts1 for DecimalType
2020-01-01 14:49:48.510 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.511 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_system for OnOffType
2020-01-01 14:49:48.511 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising Thing Node...
2020-01-01 14:49:48.511 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:meter_watts1 for DecimalType
2020-01-01 14:49:48.512 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_power for OnOffType
2020-01-01 14:49:48.512 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:scene_number for DecimalType
2020-01-01 14:49:48.513 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.514 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_power for OnOffType
2020-01-01 14:49:48.514 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising Thing Node...
2020-01-01 14:49:48.516 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:scene_number for DecimalType
2020-01-01 14:49:48.516 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:scene_number for DecimalType
2020-01-01 14:49:48.517 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:sensor_binary1 for OnOffType
2020-01-01 14:49:48.516 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_heat for OnOffType
2020-01-01 14:49:48.519 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: ProtocolInfo
2020-01-01 14:49:48.519 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:scene_number for DecimalType
2020-01-01 14:49:48.520 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Listening = true
2020-01-01 14:49:48.521 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Routing   = true
2020-01-01 14:49:48.524 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_general1 for OnOffType
2020-01-01 14:49:48.523 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Updating node properties.
2020-01-01 14:49:48.525 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_general1 for OnOffType
2020-01-01 14:49:48.520 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:sensor_power for DecimalType
2020-01-01 14:49:48.520 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_heat for OnOffType
2020-01-01 14:49:48.518 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_binary1 for OnOffType
2020-01-01 14:49:48.523 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Beaming   = true
2020-01-01 14:49:48.526 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:notification_send1 for DecimalType
2020-01-01 14:49:48.529 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Updating node properties. MAN=271
2020-01-01 14:49:48.529 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:notification_send1 for DecimalType
2020-01-01 14:49:48.528 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_binary1 for OnOffType
2020-01-01 14:49:48.527 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Version   = 4
2020-01-01 14:49:48.530 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: FLIRS     = false
2020-01-01 14:49:48.530 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:alarm_general1 for OnOffType
2020-01-01 14:49:48.528 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.531 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Security  = false
2020-01-01 14:49:48.532 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Max Baud  = 40000
2020-01-01 14:49:48.531 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:alarm_general1 for OnOffType
2020-01-01 14:49:48.529 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:sensor_power for DecimalType
2020-01-01 14:49:48.532 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.532 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:switch_dimmer1 for PercentType
2020-01-01 14:49:48.532 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_system1 for OnOffType
2020-01-01 14:49:48.533 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Generic  = GENERIC_TYPE_SENSOR_BINARY
2020-01-01 14:49:48.533 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:meter_kwh for DecimalType
2020-01-01 14:49:48.534 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 44: Specific = SPECIFIC_TYPE_ROUTING_SENSOR_BINARY
2020-01-01 14:49:48.533 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_system1 for OnOffType
2020-01-01 14:49:48.534 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:meter_kwh for DecimalType
2020-01-01 14:49:48.534 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 44: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.534 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_power1 for OnOffType
2020-01-01 14:49:48.535 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_power1 for OnOffType
2020-01-01 14:49:48.535 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 44: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.536 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.536 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:alarm_heat1 for OnOffType
2020-01-01 14:49:48.537 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Properties synchronised
2020-01-01 14:49:48.539 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:switch_dimmer1 for PercentType
2020-01-01 14:49:48.540 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:sensor_binary2 for OnOffType
2020-01-01 14:49:48.541 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Update ASSOCIATION group_ZWaveAssociationGroup [index=3, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.541 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_binary2 for OnOffType
2020-01-01 14:49:48.542 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.542 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:meter_watts for DecimalType
2020-01-01 14:49:48.541 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:switch_dimmer1 for PercentType
2020-01-01 14:49:48.543 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising Thing Node...
2020-01-01 14:49:48.543 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_binary2 for OnOffType
2020-01-01 14:49:48.538 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:alarm_heat1 for OnOffType
2020-01-01 14:49:48.544 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:scene_number for DecimalType
2020-01-01 14:49:48.544 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.547 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:alarm_general2 for OnOffType
2020-01-01 14:49:48.547 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:scene_number for DecimalType
2020-01-01 14:49:48.547 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 44: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.549 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 44: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.549 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:sensor_power1 for DecimalType
2020-01-01 14:49:48.546 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising cmd channel zwave:device:9412cbc8:node42:switch_dimmer2 for PercentType
2020-01-01 14:49:48.550 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 44: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.550 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:sensor_power1 for DecimalType
2020-01-01 14:49:48.550 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:switch_dimmer2 for PercentType
2020-01-01 14:49:48.551 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 44: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.552 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 44: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.552 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:meter_kwh1 for DecimalType
2020-01-01 14:49:48.552 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3636: Transaction COMPLETED
2020-01-01 14:49:48.553 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 78ms
2020-01-01 14:49:48.554 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:meter_kwh1 for DecimalType
2020-01-01 14:49:48.548 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:meter_watts for DecimalType
2020-01-01 14:49:48.554 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:meter_reset for OnOffType
2020-01-01 14:49:48.555 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:meter_watts1 for DecimalType
2020-01-01 14:49:48.555 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:meter_reset for OnOffType
2020-01-01 14:49:48.557 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:sensor_binary1 for OnOffType
2020-01-01 14:49:48.557 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:meter_watts1 for DecimalType
2020-01-01 14:49:48.557 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_binary1 for OnOffType
2020-01-01 14:49:48.557 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.554 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3636: Transaction completed
2020-01-01 14:49:48.549 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:alarm_general2 for OnOffType
2020-01-01 14:49:48.558 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:sensor_temperature3 for QuantityType
2020-01-01 14:49:48.558 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_binary1 for OnOffType
2020-01-01 14:49:48.559 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3636 DONE
2020-01-01 14:49:48.559 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_temperature3 for QuantityType
2020-01-01 14:49:48.559 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_general1 for OnOffType
2020-01-01 14:49:48.560 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:alarm_general1 for OnOffType
2020-01-01 14:49:48.561 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_general1 for OnOffType
2020-01-01 14:49:48.561 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:alarm_general1 for OnOffType
2020-01-01 14:49:48.562 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.563 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:notification_send1 for DecimalType
2020-01-01 14:49:48.563 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_general for OnOffType
2020-01-01 14:49:48.560 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:sensor_temperature4 for QuantityType
2020-01-01 14:49:48.564 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_general for OnOffType
2020-01-01 14:49:48.565 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.565 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Initialising state channel zwave:device:9412cbc8:node42:switch_dimmer2 for PercentType
2020-01-01 14:49:48.566 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Polling initialised at 86400 seconds - start in 72316800 milliseconds.
2020-01-01 14:49:48.566 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.567 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Device initialisation complete.
2020-01-01 14:49:48.567 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:sensor_binary2 for OnOffType
2020-01-01 14:49:48.567 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 30 8A 
2020-01-01 14:49:48.568 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Controller status changed to ONLINE.
2020-01-01 14:49:48.564 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:notification_send1 for DecimalType
2020-01-01 14:49:48.568 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.569 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_system for OnOffType
2020-01-01 14:49:48.569 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_system for OnOffType
2020-01-01 14:49:48.569 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 30 8A 
2020-01-01 14:49:48.568 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_binary2 for OnOffType
2020-01-01 14:49:48.566 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3636: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.565 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_temperature4 for QuantityType
2020-01-01 14:49:48.573 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Updating node properties.
2020-01-01 14:49:48.569 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_system1 for OnOffType
2020-01-01 14:49:48.575 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_system1 for OnOffType
2020-01-01 14:49:48.575 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_power for OnOffType
2020-01-01 14:49:48.577 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_binary2 for OnOffType
2020-01-01 14:49:48.579 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_power1 for OnOffType
2020-01-01 14:49:48.579 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:alarm_general2 for OnOffType
2020-01-01 14:49:48.579 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.580 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.579 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_power for OnOffType
2020-01-01 14:49:48.582 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.582 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3637: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.582 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 44: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@ee632
2020-01-01 14:49:48.583 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.583 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 44: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.580 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:sensor_temperature5 for QuantityType
2020-01-01 14:49:48.584 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 00 04 20 01 DC 
2020-01-01 14:49:48.584 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3637: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.585 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.584 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_temperature5 for QuantityType
2020-01-01 14:49:48.585 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.586 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising cmd channel zwave:device:9412cbc8:node44:sensor_temperature6 for QuantityType
2020-01-01 14:49:48.586 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_power1 for OnOffType
2020-01-01 14:49:48.586 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.586 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.587 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 44: Node advancer - advancing to PING
2020-01-01 14:49:48.588 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_heat for OnOffType
2020-01-01 14:49:48.588 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:alarm_heat1 for OnOffType
2020-01-01 14:49:48.588 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:48.588 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:alarm_heat1 for OnOffType
2020-01-01 14:49:48.589 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Updating node properties. MAN=271
2020-01-01 14:49:48.586 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Initialising state channel zwave:device:9412cbc8:node44:sensor_temperature6 for QuantityType
2020-01-01 14:49:48.588 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_heat for OnOffType
2020-01-01 14:49:48.590 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 44: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.591 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.591 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 44: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.592 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 44: SECURITY not supported
2020-01-01 14:49:48.589 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.590 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.593 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3637: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.593 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Properties synchronised
2020-01-01 14:49:48.593 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 44: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.593 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.592 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:switch_dimmer1 for PercentType
2020-01-01 14:49:48.594 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 44: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@10c6997
2020-01-01 14:49:48.594 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:switch_dimmer1 for PercentType
2020-01-01 14:49:48.595 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:alarm_general2 for OnOffType
2020-01-01 14:49:48.597 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:sensor_temperature3 for QuantityType
2020-01-01 14:49:48.598 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3637: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.592 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.599 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 44: Adding to device queue
2020-01-01 14:49:48.598 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Polling initialised at 1800 seconds - start in 176400 milliseconds.
2020-01-01 14:49:48.598 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_temperature3 for QuantityType
2020-01-01 14:49:48.600 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 44: Added 3687 to queue - size 12
2020-01-01 14:49:48.600 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.601 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.600 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 44: Device initialisation complete.
2020-01-01 14:49:48.602 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Controller status changed to ONLINE.
2020-01-01 14:49:48.599 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising cmd channel zwave:device:9412cbc8:node41:switch_dimmer2 for PercentType
2020-01-01 14:49:48.599 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:48.602 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:sensor_temperature4 for QuantityType
2020-01-01 14:49:48.601 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.603 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising Thing Node...
2020-01-01 14:49:48.603 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.603 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:switch_dimmer2 for PercentType
2020-01-01 14:49:48.604 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:sensor_power for DecimalType
2020-01-01 14:49:48.604 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Initialising state channel zwave:device:9412cbc8:node41:switch_dimmer2 for PercentType
2020-01-01 14:49:48.605 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: ProtocolInfo
2020-01-01 14:49:48.605 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:sensor_power for DecimalType
2020-01-01 14:49:48.605 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Polling initialised at 86400 seconds - start in 25488000 milliseconds.
2020-01-01 14:49:48.604 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_temperature4 for QuantityType
2020-01-01 14:49:48.606 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Device initialisation complete.
2020-01-01 14:49:48.606 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Listening = true
2020-01-01 14:49:48.606 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:meter_watts for DecimalType
2020-01-01 14:49:48.607 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Routing   = true
2020-01-01 14:49:48.607 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Controller status changed to ONLINE.
2020-01-01 14:49:48.606 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:switch_dimmer1 for PercentType
2020-01-01 14:49:48.608 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Beaming   = true
2020-01-01 14:49:48.608 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:sensor_power1 for DecimalType
2020-01-01 14:49:48.610 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.610 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Version   = 4
2020-01-01 14:49:48.607 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:meter_watts for DecimalType
2020-01-01 14:49:48.607 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:sensor_temperature5 for QuantityType
2020-01-01 14:49:48.610 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Updating node properties.
2020-01-01 14:49:48.611 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: FLIRS     = false
2020-01-01 14:49:48.611 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_temperature5 for QuantityType
2020-01-01 14:49:48.613 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:sensor_power1 for DecimalType
2020-01-01 14:49:48.614 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Security  = false
2020-01-01 14:49:48.614 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising cmd channel zwave:device:9412cbc8:node47:sensor_temperature6 for QuantityType
2020-01-01 14:49:48.615 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Max Baud  = 40000
2020-01-01 14:49:48.615 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:meter_kwh1 for DecimalType
2020-01-01 14:49:48.611 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:meter_kwh for DecimalType
2020-01-01 14:49:48.616 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:meter_kwh for DecimalType
2020-01-01 14:49:48.617 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.614 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Updating node properties.
2020-01-01 14:49:48.617 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:meter_reset for OnOffType
2020-01-01 14:49:48.618 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Generic  = GENERIC_TYPE_SENSOR_BINARY
2020-01-01 14:49:48.618 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:meter_reset for OnOffType
2020-01-01 14:49:48.618 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 48: Specific = SPECIFIC_TYPE_ROUTING_SENSOR_BINARY
2020-01-01 14:49:48.619 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:scene_number for DecimalType
2020-01-01 14:49:48.619 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.619 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Initialising state channel zwave:device:9412cbc8:node47:sensor_temperature6 for QuantityType
2020-01-01 14:49:48.620 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:scene_number for DecimalType
2020-01-01 14:49:48.620 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Polling initialised at 1800 seconds - start in 986400 milliseconds.
2020-01-01 14:49:48.621 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:alarm_heat for OnOffType
2020-01-01 14:49:48.621 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:alarm_heat for OnOffType
2020-01-01 14:49:48.622 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Device initialisation complete.
2020-01-01 14:49:48.622 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:alarm_power for OnOffType
2020-01-01 14:49:48.622 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:alarm_power for OnOffType
2020-01-01 14:49:48.623 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Controller status changed to ONLINE.
2020-01-01 14:49:48.623 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:switch_binary1 for OnOffType
2020-01-01 14:49:48.624 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:switch_binary1 for OnOffType
2020-01-01 14:49:48.624 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.625 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:switch_binary1 for OnOffType
2020-01-01 14:49:48.626 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Updating node properties. MAN=271
2020-01-01 14:49:48.625 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:meter_watts1 for DecimalType
2020-01-01 14:49:48.627 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.627 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Updating node properties. MAN=280
2020-01-01 14:49:48.628 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.628 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:meter_watts1 for DecimalType
2020-01-01 14:49:48.629 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Properties synchronised
2020-01-01 14:49:48.627 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:meter_kwh1 for DecimalType
2020-01-01 14:49:48.629 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:meter_kwh1 for DecimalType
2020-01-01 14:49:48.630 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:meter_watts1 for DecimalType
2020-01-01 14:49:48.630 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.628 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Updating node properties. MAN=280. SET. Was 280
2020-01-01 14:49:48.631 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 48: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.632 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.632 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Properties synchronised
2020-01-01 14:49:48.633 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Updating node properties.
2020-01-01 14:49:48.633 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 48: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.633 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Updating node properties. MAN=280
2020-01-01 14:49:48.634 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 48: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.634 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Updating node properties. MAN=280. SET. Was 280
2020-01-01 14:49:48.634 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3637: Transaction COMPLETED
2020-01-01 14:49:48.635 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Properties synchronised
2020-01-01 14:49:48.635 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 55ms
2020-01-01 14:49:48.635 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3637: Transaction completed
2020-01-01 14:49:48.636 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.637 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.637 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:meter_watts1 for DecimalType
2020-01-01 14:49:48.633 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:meter_kwh1 for DecimalType
2020-01-01 14:49:48.637 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.638 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising Thing Node...
2020-01-01 14:49:48.638 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.638 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising cmd channel zwave:device:9412cbc8:node51:switch_binary for OnOffType
2020-01-01 14:49:48.639 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising Thing Node...
2020-01-01 14:49:48.639 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising state channel zwave:device:9412cbc8:node51:switch_binary for OnOffType
2020-01-01 14:49:48.639 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_general1 for OnOffType
2020-01-01 14:49:48.636 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3637 DONE
2020-01-01 14:49:48.638 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising cmd channel zwave:device:9412cbc8:node49:switch_binary2 for OnOffType
2020-01-01 14:49:48.639 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.640 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising cmd channel zwave:device:9412cbc8:node52:switch_binary for OnOffType
2020-01-01 14:49:48.640 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising state channel zwave:device:9412cbc8:node51:switch_binary for OnOffType
2020-01-01 14:49:48.641 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.641 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.641 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:switch_binary2 for OnOffType
2020-01-01 14:49:48.642 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising state channel zwave:device:9412cbc8:node52:switch_binary for OnOffType
2020-01-01 14:49:48.640 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_general1 for OnOffType
2020-01-01 14:49:48.642 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.643 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 49 F3 
2020-01-01 14:49:48.643 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:notification_send1 for DecimalType
2020-01-01 14:49:48.644 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising cmd channel zwave:device:9412cbc8:node51:meter_kwh for DecimalType
2020-01-01 14:49:48.644 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 49 F3 
2020-01-01 14:49:48.644 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3637: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.645 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising state channel zwave:device:9412cbc8:node51:meter_kwh for DecimalType
2020-01-01 14:49:48.643 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising state channel zwave:device:9412cbc8:node52:switch_binary for OnOffType
2020-01-01 14:49:48.641 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising Thing Node...
2020-01-01 14:49:48.645 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising cmd channel zwave:device:9412cbc8:node52:meter_kwh for DecimalType
2020-01-01 14:49:48.645 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:notification_send1 for DecimalType
2020-01-01 14:49:48.644 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Initialising state channel zwave:device:9412cbc8:node49:switch_binary2 for OnOffType
2020-01-01 14:49:48.645 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising cmd channel zwave:device:9412cbc8:node51:meter_current for DecimalType
2020-01-01 14:49:48.645 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:scene_number for DecimalType
2020-01-01 14:49:48.647 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 48: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@a338a9
2020-01-01 14:49:48.647 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising state channel zwave:device:9412cbc8:node52:meter_kwh for DecimalType
2020-01-01 14:49:48.647 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising state channel zwave:device:9412cbc8:node51:meter_current for DecimalType
2020-01-01 14:49:48.647 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 48: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.648 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.647 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Polling initialised at 86400 seconds - start in 12614400 milliseconds.
2020-01-01 14:49:48.648 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 48: Node advancer - advancing to PING
2020-01-01 14:49:48.649 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.649 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Device initialisation complete.
2020-01-01 14:49:48.649 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3638: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.649 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 48: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.648 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_system1 for OnOffType
2020-01-01 14:49:48.650 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 48: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.648 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising cmd channel zwave:device:9412cbc8:node52:meter_current for DecimalType
2020-01-01 14:49:48.650 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_system1 for OnOffType
2020-01-01 14:49:48.651 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 48: SECURITY not supported
2020-01-01 14:49:48.650 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:scene_number for DecimalType
2020-01-01 14:49:48.651 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising cmd channel zwave:device:9412cbc8:node51:meter_powerfactor for DecimalType
2020-01-01 14:49:48.651 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 48: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.651 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising state channel zwave:device:9412cbc8:node51:meter_powerfactor for DecimalType
2020-01-01 14:49:48.650 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Controller status changed to ONLINE.
2020-01-01 14:49:48.652 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 48: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1a1aa19
2020-01-01 14:49:48.652 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising cmd channel zwave:device:9412cbc8:node51:meter_watts for DecimalType
2020-01-01 14:49:48.649 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.652 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.653 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 48: Adding to device queue
2020-01-01 14:49:48.653 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising state channel zwave:device:9412cbc8:node51:meter_watts for DecimalType
2020-01-01 14:49:48.653 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 48: Added 3688 to queue - size 13
2020-01-01 14:49:48.654 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 0F 01 F2 
2020-01-01 14:49:48.655 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.651 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_power1 for OnOffType
2020-01-01 14:49:48.657 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3638: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.658 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.660 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.651 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising state channel zwave:device:9412cbc8:node52:meter_current for DecimalType
2020-01-01 14:49:48.657 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_power1 for OnOffType
2020-01-01 14:49:48.659 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.652 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:sensor_power for DecimalType
2020-01-01 14:49:48.654 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.662 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.662 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising cmd channel zwave:device:9412cbc8:node51:meter_voltage for DecimalType
2020-01-01 14:49:48.663 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Initialising state channel zwave:device:9412cbc8:node51:meter_voltage for DecimalType
2020-01-01 14:49:48.662 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:alarm_heat1 for OnOffType
2020-01-01 14:49:48.663 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Polling initialised at 86400 seconds - start in 50976000 milliseconds.
2020-01-01 14:49:48.664 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 51: Device initialisation complete.
2020-01-01 14:49:48.665 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Controller status changed to ONLINE.
2020-01-01 14:49:48.662 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:sensor_power for DecimalType
2020-01-01 14:49:48.666 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.667 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:meter_kwh for DecimalType
2020-01-01 14:49:48.670 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.671 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3638: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.672 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.672 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3638: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.672 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating node properties.
2020-01-01 14:49:48.673 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.674 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating node properties. MAN=280
2020-01-01 14:49:48.674 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: ProtocolInfo
2020-01-01 14:49:48.675 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Listening = true
2020-01-01 14:49:48.675 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating node properties. MAN=280. SET. Was 280
2020-01-01 14:49:48.676 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Routing   = true
2020-01-01 14:49:48.670 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:meter_kwh for DecimalType
2020-01-01 14:49:48.663 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising cmd channel zwave:device:9412cbc8:node52:meter_powerfactor for DecimalType
2020-01-01 14:49:48.676 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:alarm_heat1 for OnOffType
2020-01-01 14:49:48.676 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Properties synchronised
2020-01-01 14:49:48.677 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Beaming   = true
2020-01-01 14:49:48.678 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Version   = 4
2020-01-01 14:49:48.678 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.677 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:meter_watts for DecimalType
2020-01-01 14:49:48.677 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: FLIRS     = false
2020-01-01 14:49:48.679 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Security  = false
2020-01-01 14:49:48.679 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.679 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising cmd channel zwave:device:9412cbc8:node38:switch_dimmer2 for PercentType
2020-01-01 14:49:48.680 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Max Baud  = 40000
2020-01-01 14:49:48.681 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.681 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:switch_dimmer2 for PercentType
2020-01-01 14:49:48.682 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Generic  = GENERIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.682 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:meter_watts for DecimalType
2020-01-01 14:49:48.682 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Initialising state channel zwave:device:9412cbc8:node38:switch_dimmer2 for PercentType
2020-01-01 14:49:48.682 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 73: Specific = SPECIFIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.683 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 73: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.683 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.684 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising state channel zwave:device:9412cbc8:node52:meter_powerfactor for DecimalType
2020-01-01 14:49:48.684 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 73: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.683 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Polling initialised at 86400 seconds - start in 53049600 milliseconds.
2020-01-01 14:49:48.685 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Device initialisation complete.
2020-01-01 14:49:48.684 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:meter_reset for OnOffType
2020-01-01 14:49:48.686 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:meter_reset for OnOffType
2020-01-01 14:49:48.685 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising Thing Node...
2020-01-01 14:49:48.686 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Controller status changed to ONLINE.
2020-01-01 14:49:48.687 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising cmd channel zwave:device:9412cbc8:node65:switch_binary for OnOffType
2020-01-01 14:49:48.688 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising state channel zwave:device:9412cbc8:node65:switch_binary for OnOffType
2020-01-01 14:49:48.688 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.688 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Updating node properties.
2020-01-01 14:49:48.689 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising state channel zwave:device:9412cbc8:node65:switch_binary for OnOffType
2020-01-01 14:49:48.689 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.689 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Updating node properties. MAN=271
2020-01-01 14:49:48.690 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.690 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising cmd channel zwave:device:9412cbc8:node65:meter_kwh for DecimalType
2020-01-01 14:49:48.685 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 73: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.691 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 73: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.691 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising cmd channel zwave:device:9412cbc8:node52:meter_watts for DecimalType
2020-01-01 14:49:48.691 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 73: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.692 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 73: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.693 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 73: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.694 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3638: Transaction COMPLETED
2020-01-01 14:49:48.695 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 46ms
2020-01-01 14:49:48.696 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3638: Transaction completed
2020-01-01 14:49:48.690 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_general for OnOffType
2020-01-01 14:49:48.696 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3638 DONE
2020-01-01 14:49:48.696 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.696 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_general for OnOffType
2020-01-01 14:49:48.694 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Updating node properties.
2020-01-01 14:49:48.697 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Updating node properties. MAN=271
2020-01-01 14:49:48.698 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising state channel zwave:device:9412cbc8:node52:meter_watts for DecimalType
2020-01-01 14:49:48.699 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_system for OnOffType
2020-01-01 14:49:48.699 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_system for OnOffType
2020-01-01 14:49:48.699 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Properties synchronised
2020-01-01 14:49:48.699 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising cmd channel zwave:device:9412cbc8:node52:meter_voltage for DecimalType
2020-01-01 14:49:48.700 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.700 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_power for OnOffType
2020-01-01 14:49:48.700 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising state channel zwave:device:9412cbc8:node65:meter_kwh for DecimalType
2020-01-01 14:49:48.701 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_power for OnOffType
2020-01-01 14:49:48.701 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.701 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3638: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.701 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising cmd channel zwave:device:9412cbc8:node65:meter_current for DecimalType
2020-01-01 14:49:48.701 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_heat for OnOffType
2020-01-01 14:49:48.702 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising state channel zwave:device:9412cbc8:node65:meter_current for DecimalType
2020-01-01 14:49:48.702 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.702 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_heat for OnOffType
2020-01-01 14:49:48.703 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 73: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@12dfcb6
2020-01-01 14:49:48.700 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Initialising state channel zwave:device:9412cbc8:node52:meter_voltage for DecimalType
2020-01-01 14:49:48.703 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 73: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.698 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.704 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.703 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising cmd channel zwave:device:9412cbc8:node65:meter_powerfactor for DecimalType
2020-01-01 14:49:48.703 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising Thing Node...
2020-01-01 14:49:48.704 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 73: Node advancer - advancing to PING
2020-01-01 14:49:48.705 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:switch_dimmer1 for PercentType
2020-01-01 14:49:48.705 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 73: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:48.705 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:sensor_power for DecimalType
2020-01-01 14:49:48.705 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:switch_dimmer1 for PercentType
2020-01-01 14:49:48.705 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:sensor_power for DecimalType
2020-01-01 14:49:48.706 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:switch_dimmer1 for PercentType
2020-01-01 14:49:48.706 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 73: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.706 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising state channel zwave:device:9412cbc8:node65:meter_powerfactor for DecimalType
2020-01-01 14:49:48.701 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.708 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:meter_watts for DecimalType
2020-01-01 14:49:48.707 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:sensor_power1 for DecimalType
2020-01-01 14:49:48.710 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 41 FB 
2020-01-01 14:49:48.710 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising cmd channel zwave:device:9412cbc8:node65:meter_watts for DecimalType
2020-01-01 14:49:48.711 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:meter_watts for DecimalType
2020-01-01 14:49:48.711 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 41 FB 
2020-01-01 14:49:48.712 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:meter_kwh for DecimalType
2020-01-01 14:49:48.712 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:meter_kwh for DecimalType
2020-01-01 14:49:48.711 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:sensor_power1 for DecimalType
2020-01-01 14:49:48.712 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.707 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 73: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.714 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.714 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 73: SECURITY not supported
2020-01-01 14:49:48.715 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 73: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.715 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.713 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:meter_reset for OnOffType
2020-01-01 14:49:48.704 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Polling initialised at 86400 seconds - start in 77155200 milliseconds.
2020-01-01 14:49:48.715 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 73: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@2f7b37
2020-01-01 14:49:48.715 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Properties synchronised
2020-01-01 14:49:48.715 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:meter_kwh1 for DecimalType
2020-01-01 14:49:48.716 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:meter_kwh1 for DecimalType
2020-01-01 14:49:48.717 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:48.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3639: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.718 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 73: Adding to device queue
2020-01-01 14:49:48.718 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Device initialisation complete.
2020-01-01 14:49:48.718 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:meter_watts1 for DecimalType
2020-01-01 14:49:48.719 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 73: Added 3689 to queue - size 14
2020-01-01 14:49:48.719 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.715 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising state channel zwave:device:9412cbc8:node65:meter_watts for DecimalType
2020-01-01 14:49:48.719 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.719 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Controller status changed to ONLINE.
2020-01-01 14:49:48.720 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising cmd channel zwave:device:9412cbc8:node65:meter_voltage for DecimalType
2020-01-01 14:49:48.719 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:meter_watts1 for DecimalType
2020-01-01 14:49:48.720 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Initialising state channel zwave:device:9412cbc8:node65:meter_voltage for DecimalType
2020-01-01 14:49:48.720 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.721 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3639: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.721 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_general1 for OnOffType
2020-01-01 14:49:48.721 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Polling initialised at 86400 seconds - start in 19526400 milliseconds.
2020-01-01 14:49:48.722 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.722 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Device initialisation complete.
2020-01-01 14:49:48.722 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.723 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Controller status changed to ONLINE.
2020-01-01 14:49:48.723 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.723 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_general1 for OnOffType
2020-01-01 14:49:48.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3639: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.723 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.724 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.715 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:meter_reset for OnOffType
2020-01-01 14:49:48.724 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:notification_send1 for DecimalType
2020-01-01 14:49:48.724 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3639: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.724 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:scene_number for DecimalType
2020-01-01 14:49:48.725 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:notification_send1 for DecimalType
2020-01-01 14:49:48.725 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:scene_number for DecimalType
2020-01-01 14:49:48.725 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.726 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:alarm_heat for OnOffType
2020-01-01 14:49:48.726 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_system1 for OnOffType
2020-01-01 14:49:48.727 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_system1 for OnOffType
2020-01-01 14:49:48.727 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:alarm_heat for OnOffType
2020-01-01 14:49:48.727 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: ProtocolInfo
2020-01-01 14:49:48.728 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Listening = true
2020-01-01 14:49:48.728 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:alarm_power for OnOffType
2020-01-01 14:49:48.728 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_power1 for OnOffType
2020-01-01 14:49:48.729 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Routing   = true
2020-01-01 14:49:48.729 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_power1 for OnOffType
2020-01-01 14:49:48.729 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Beaming   = true
2020-01-01 14:49:48.730 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Version   = 4
2020-01-01 14:49:48.729 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:alarm_power for OnOffType
2020-01-01 14:49:48.731 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: FLIRS     = false
2020-01-01 14:49:48.732 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Security  = false
2020-01-01 14:49:48.733 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Max Baud  = 40000
2020-01-01 14:49:48.733 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Updating node properties.
2020-01-01 14:49:48.734 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.735 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:48.736 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 65: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:48.734 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Updating node properties. MAN=134
2020-01-01 14:49:48.737 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.737 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Updating node properties. MAN=134. SET. Was 134
2020-01-01 14:49:48.738 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:switch_binary1 for OnOffType
2020-01-01 14:49:48.739 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:switch_binary1 for OnOffType
2020-01-01 14:49:48.730 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:alarm_heat1 for OnOffType
2020-01-01 14:49:48.740 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.741 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.741 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:alarm_heat1 for OnOffType
2020-01-01 14:49:48.741 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Properties synchronised
2020-01-01 14:49:48.742 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.743 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Updating node properties.
2020-01-01 14:49:48.740 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:switch_binary1 for OnOffType
2020-01-01 14:49:48.744 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:meter_watts1 for DecimalType
2020-01-01 14:49:48.744 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.745 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising cmd channel zwave:device:9412cbc8:node50:switch_dimmer2 for PercentType
2020-01-01 14:49:48.745 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:meter_watts1 for DecimalType
2020-01-01 14:49:48.745 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:switch_dimmer2 for PercentType
2020-01-01 14:49:48.745 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.746 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.746 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising Thing Node...
2020-01-01 14:49:48.746 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:meter_kwh1 for DecimalType
2020-01-01 14:49:48.747 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:meter_kwh1 for DecimalType
2020-01-01 14:49:48.747 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.748 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.749 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.749 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising cmd channel zwave:device:9412cbc8:node71:switch_dimmer for OnOffType
2020-01-01 14:49:48.747 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Initialising state channel zwave:device:9412cbc8:node50:switch_dimmer2 for PercentType
2020-01-01 14:49:48.750 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Polling initialised at 86400 seconds - start in 33782400 milliseconds.
2020-01-01 14:49:48.751 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.752 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.753 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3639: Transaction COMPLETED
2020-01-01 14:49:48.751 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Device initialisation complete.
2020-01-01 14:49:48.754 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 37ms
2020-01-01 14:49:48.749 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising cmd channel zwave:device:9412cbc8:node64:switch_binary2 for OnOffType
2020-01-01 14:49:48.748 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Updating node properties. MAN=271
2020-01-01 14:49:48.754 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3639: Transaction completed
2020-01-01 14:49:48.755 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3639 DONE
2020-01-01 14:49:48.755 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.753 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising Thing Node...
2020-01-01 14:49:48.754 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Controller status changed to ONLINE.
2020-01-01 14:49:48.756 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.755 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising cmd channel zwave:device:9412cbc8:node71:switch_dimmer for PercentType
2020-01-01 14:49:48.756 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3639: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.757 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Properties synchronised
2020-01-01 14:49:48.761 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Updating node properties.
2020-01-01 14:49:48.763 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Updating node properties. MAN=134
2020-01-01 14:49:48.764 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Updating node properties. MAN=134. SET. Was 134
2020-01-01 14:49:48.765 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Properties synchronised
2020-01-01 14:49:48.756 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:scene_number for DecimalType
2020-01-01 14:49:48.756 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.767 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.768 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 4E F4 
2020-01-01 14:49:48.758 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 65: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@495a8a
2020-01-01 14:49:48.769 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 4E F4 
2020-01-01 14:49:48.770 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 65: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.757 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising state channel zwave:device:9412cbc8:node71:switch_dimmer for PercentType
2020-01-01 14:49:48.770 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 65: Node advancer - advancing to PING
2020-01-01 14:49:48.771 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.771 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising cmd channel zwave:device:9412cbc8:node71:color_color for OnOffType
2020-01-01 14:49:48.771 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:scene_number for DecimalType
2020-01-01 14:49:48.773 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3640: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.772 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:48.772 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising cmd channel zwave:device:9412cbc8:node71:color_color for PercentType
2020-01-01 14:49:48.775 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 65: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.775 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:sensor_power for DecimalType
2020-01-01 14:49:48.773 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.774 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising state channel zwave:device:9412cbc8:node71:color_color for PercentType
2020-01-01 14:49:48.776 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 65: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.776 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.777 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: SECURITY not supported
2020-01-01 14:49:48.778 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.779 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@14bc5a7
2020-01-01 14:49:48.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising state channel zwave:device:9412cbc8:node71:color_color for PercentType
2020-01-01 14:49:48.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:switch_binary2 for OnOffType
2020-01-01 14:49:48.780 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Adding to device queue
2020-01-01 14:49:48.781 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:48.781 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.781 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Added 3690 to queue - size 15
2020-01-01 14:49:48.782 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.783 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Initialising state channel zwave:device:9412cbc8:node64:switch_binary2 for OnOffType
2020-01-01 14:49:48.783 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising cmd channel zwave:device:9412cbc8:node71:color_color for HSBType
2020-01-01 14:49:48.783 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3640: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.784 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Polling initialised at 86400 seconds - start in 78710400 milliseconds.
2020-01-01 14:49:48.784 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.785 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.784 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising state channel zwave:device:9412cbc8:node71:color_color for HSBType
2020-01-01 14:49:48.786 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.785 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Device initialisation complete.
2020-01-01 14:49:48.785 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:sensor_power for DecimalType
2020-01-01 14:49:48.788 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Controller status changed to ONLINE.
2020-01-01 14:49:48.789 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.789 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:meter_kwh for DecimalType
2020-01-01 14:49:48.785 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.785 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.790 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.787 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising cmd channel zwave:device:9412cbc8:node71:color_temperature for OnOffType
2020-01-01 14:49:48.790 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.791 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.792 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.790 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising Thing Node...
2020-01-01 14:49:48.792 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3640: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.793 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.791 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising cmd channel zwave:device:9412cbc8:node71:color_temperature for PercentType
2020-01-01 14:49:48.793 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising Thing Node...
2020-01-01 14:49:48.794 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Initialising state channel zwave:device:9412cbc8:node71:color_temperature for PercentType
2020-01-01 14:49:48.796 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:scene_number for DecimalType
2020-01-01 14:49:48.797 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:scene_number for DecimalType
2020-01-01 14:49:48.795 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Updating node properties.
2020-01-01 14:49:48.793 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising cmd channel zwave:device:9412cbc8:node75:switch_dimmer for OnOffType
2020-01-01 14:49:48.799 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Updating node properties. MAN=271
2020-01-01 14:49:48.800 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:sensor_power for DecimalType
2020-01-01 14:49:48.800 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.801 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:meter_kwh for DecimalType
2020-01-01 14:49:48.795 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Polling initialised at 1800 seconds - start in 585000 milliseconds.
2020-01-01 14:49:48.802 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:sensor_power for DecimalType
2020-01-01 14:49:48.802 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 71: Device initialisation complete.
2020-01-01 14:49:48.794 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3640: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.803 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:meter_watts for DecimalType
2020-01-01 14:49:48.803 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:48.804 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:meter_kwh for DecimalType
2020-01-01 14:49:48.804 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: ProtocolInfo
2020-01-01 14:49:48.804 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:meter_kwh for DecimalType
2020-01-01 14:49:48.805 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Listening = true
2020-01-01 14:49:48.805 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:meter_watts for DecimalType
2020-01-01 14:49:48.801 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Properties synchronised
2020-01-01 14:49:48.800 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising cmd channel zwave:device:9412cbc8:node75:switch_dimmer for PercentType
2020-01-01 14:49:48.806 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Routing   = true
2020-01-01 14:49:48.807 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:meter_watts for DecimalType
2020-01-01 14:49:48.803 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:meter_watts for DecimalType
2020-01-01 14:49:48.808 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising state channel zwave:device:9412cbc8:node75:switch_dimmer for PercentType
2020-01-01 14:49:48.809 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:meter_reset for OnOffType
2020-01-01 14:49:48.810 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:meter_reset for OnOffType
2020-01-01 14:49:48.810 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:meter_reset for OnOffType
2020-01-01 14:49:48.811 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:meter_reset for OnOffType
2020-01-01 14:49:48.813 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.806 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Controller status changed to ONLINE.
2020-01-01 14:49:48.814 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.809 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising cmd channel zwave:device:9412cbc8:node75:color_color for OnOffType
2020-01-01 14:49:48.816 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising cmd channel zwave:device:9412cbc8:node75:color_color for PercentType
2020-01-01 14:49:48.815 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.816 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.817 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.817 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising state channel zwave:device:9412cbc8:node75:color_color for PercentType
2020-01-01 14:49:48.818 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.818 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Beaming   = true
2020-01-01 14:49:48.819 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:alarm_heat for OnOffType
2020-01-01 14:49:48.819 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Version   = 4
2020-01-01 14:49:48.820 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: FLIRS     = false
2020-01-01 14:49:48.819 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising state channel zwave:device:9412cbc8:node75:color_color for PercentType
2020-01-01 14:49:48.820 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Security  = false
2020-01-01 14:49:48.820 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:alarm_heat for OnOffType
2020-01-01 14:49:48.821 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising cmd channel zwave:device:9412cbc8:node75:color_color for HSBType
2020-01-01 14:49:48.821 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Max Baud  = 40000
2020-01-01 14:49:48.818 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:alarm_heat for OnOffType
2020-01-01 14:49:48.822 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.822 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:alarm_heat for OnOffType
2020-01-01 14:49:48.822 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising state channel zwave:device:9412cbc8:node75:color_color for HSBType
2020-01-01 14:49:48.823 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:48.823 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising cmd channel zwave:device:9412cbc8:node75:color_temperature for OnOffType
2020-01-01 14:49:48.824 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 78: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:48.824 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:alarm_power for OnOffType
2020-01-01 14:49:48.824 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.824 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising cmd channel zwave:device:9412cbc8:node75:color_temperature for PercentType
2020-01-01 14:49:48.825 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:alarm_power for OnOffType
2020-01-01 14:49:48.825 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.828 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Updating node properties.
2020-01-01 14:49:48.829 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:alarm_system for OnOffType
2020-01-01 14:49:48.829 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Updating node properties. MAN=280
2020-01-01 14:49:48.830 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Updating node properties. MAN=280. SET. Was 280
2020-01-01 14:49:48.832 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Properties synchronised
2020-01-01 14:49:48.828 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:alarm_power for OnOffType
2020-01-01 14:49:48.833 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:alarm_power for OnOffType
2020-01-01 14:49:48.827 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.834 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:alarm_system for OnOffType
2020-01-01 14:49:48.834 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.826 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Initialising state channel zwave:device:9412cbc8:node75:color_temperature for PercentType
2020-01-01 14:49:48.830 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:alarm_system for OnOffType
2020-01-01 14:49:48.835 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:alarm_system for OnOffType
2020-01-01 14:49:48.835 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.836 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.834 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising Thing Node...
2020-01-01 14:49:48.836 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Polling initialised at 1800 seconds - start in 1292400 milliseconds.
2020-01-01 14:49:48.836 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.836 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 78: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.838 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising Thing Node...
2020-01-01 14:49:48.838 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.838 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:switch_dimmer1 for PercentType
2020-01-01 14:49:48.838 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:switch_dimmer1 for PercentType
2020-01-01 14:49:48.839 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising cmd channel zwave:device:9412cbc8:node78:switch_binary for OnOffType
2020-01-01 14:49:48.839 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:switch_dimmer1 for PercentType
2020-01-01 14:49:48.837 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.840 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:switch_dimmer1 for PercentType
2020-01-01 14:49:48.840 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising state channel zwave:device:9412cbc8:node78:switch_binary for OnOffType
2020-01-01 14:49:48.841 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:switch_dimmer1 for PercentType
2020-01-01 14:49:48.841 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:switch_dimmer1 for PercentType
2020-01-01 14:49:48.842 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:sensor_power1 for DecimalType
2020-01-01 14:49:48.843 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:sensor_power1 for DecimalType
2020-01-01 14:49:48.844 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:meter_kwh1 for DecimalType
2020-01-01 14:49:48.844 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:meter_kwh1 for DecimalType
2020-01-01 14:49:48.845 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:meter_watts1 for DecimalType
2020-01-01 14:49:48.845 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:meter_watts1 for DecimalType
2020-01-01 14:49:48.838 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 75: Device initialisation complete.
2020-01-01 14:49:48.837 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:scene_number for DecimalType
2020-01-01 14:49:48.846 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:alarm_heat1 for OnOffType
2020-01-01 14:49:48.847 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:scene_number for DecimalType
2020-01-01 14:49:48.847 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 78: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.847 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:alarm_heat1 for OnOffType
2020-01-01 14:49:48.847 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Controller status changed to ONLINE.
2020-01-01 14:49:48.848 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 78: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.848 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3640: Transaction COMPLETED
2020-01-01 14:49:48.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising state channel zwave:device:9412cbc8:node78:switch_binary for OnOffType
2020-01-01 14:49:48.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:alarm_power1 for OnOffType
2020-01-01 14:49:48.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:sensor_power for DecimalType
2020-01-01 14:49:48.848 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.849 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 77ms
2020-01-01 14:49:48.849 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3640: Transaction completed
2020-01-01 14:49:48.849 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:alarm_power1 for OnOffType
2020-01-01 14:49:48.850 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3640 DONE
2020-01-01 14:49:48.850 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:alarm_system1 for OnOffType
2020-01-01 14:49:48.851 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:alarm_system1 for OnOffType
2020-01-01 14:49:48.851 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:sensor_power1 for DecimalType
2020-01-01 14:49:48.852 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.852 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.852 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:sensor_power1 for DecimalType
2020-01-01 14:49:48.853 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising cmd channel zwave:device:9412cbc8:node66:switch_dimmer2 for PercentType
2020-01-01 14:49:48.851 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising cmd channel zwave:device:9412cbc8:node78:meter_kwh for DecimalType
2020-01-01 14:49:48.849 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:sensor_power for DecimalType
2020-01-01 14:49:48.852 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating node properties.
2020-01-01 14:49:48.855 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating node properties. MAN=271
2020-01-01 14:49:48.856 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:meter_kwh1 for DecimalType
2020-01-01 14:49:48.857 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:meter_kwh1 for DecimalType
2020-01-01 14:49:48.857 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.858 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_kwh for DecimalType
2020-01-01 14:49:48.859 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:meter_watts1 for DecimalType
2020-01-01 14:49:48.859 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Properties synchronised
2020-01-01 14:49:48.859 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising state channel zwave:device:9412cbc8:node78:meter_kwh for DecimalType
2020-01-01 14:49:48.860 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:meter_watts1 for DecimalType
2020-01-01 14:49:48.860 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising cmd channel zwave:device:9412cbc8:node78:meter_current for DecimalType
2020-01-01 14:49:48.861 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:alarm_heat1 for OnOffType
2020-01-01 14:49:48.861 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising state channel zwave:device:9412cbc8:node78:meter_current for DecimalType
2020-01-01 14:49:48.862 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:alarm_heat1 for OnOffType
2020-01-01 14:49:48.862 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising cmd channel zwave:device:9412cbc8:node78:meter_powerfactor for DecimalType
2020-01-01 14:49:48.862 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising state channel zwave:device:9412cbc8:node78:meter_powerfactor for DecimalType
2020-01-01 14:49:48.858 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3640: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.863 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:alarm_power1 for OnOffType
2020-01-01 14:49:48.864 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 78: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@110d95f
2020-01-01 14:49:48.864 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:alarm_power1 for OnOffType
2020-01-01 14:49:48.865 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_kwh for DecimalType
2020-01-01 14:49:48.865 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 78: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.865 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 78: Node advancer - advancing to PING
2020-01-01 14:49:48.853 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:switch_dimmer2 for PercentType
2020-01-01 14:49:48.865 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:alarm_system1 for OnOffType
2020-01-01 14:49:48.866 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising cmd channel zwave:device:9412cbc8:node78:meter_watts for DecimalType
2020-01-01 14:49:48.867 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.867 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:48.865 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_watts for DecimalType
2020-01-01 14:49:48.867 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising state channel zwave:device:9412cbc8:node78:meter_watts for DecimalType
2020-01-01 14:49:48.867 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Initialising state channel zwave:device:9412cbc8:node66:switch_dimmer2 for PercentType
2020-01-01 14:49:48.868 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Polling initialised at 86400 seconds - start in 27388800 milliseconds.
2020-01-01 14:49:48.869 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Device initialisation complete.
2020-01-01 14:49:48.870 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Controller status changed to ONLINE.
2020-01-01 14:49:48.871 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.869 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:alarm_system1 for OnOffType
2020-01-01 14:49:48.873 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Updating node properties.
2020-01-01 14:49:48.868 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 4C F6 
2020-01-01 14:49:48.868 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising cmd channel zwave:device:9412cbc8:node78:meter_voltage for DecimalType
2020-01-01 14:49:48.873 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.877 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Initialising state channel zwave:device:9412cbc8:node78:meter_voltage for DecimalType
2020-01-01 14:49:48.871 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_watts for DecimalType
2020-01-01 14:49:48.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_reset for OnOffType
2020-01-01 14:49:48.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Polling initialised at 86400 seconds - start in 36028800 milliseconds.
2020-01-01 14:49:48.879 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 4C F6 
2020-01-01 14:49:48.874 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Updating node properties. MAN=271
2020-01-01 14:49:48.879 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_reset for OnOffType
2020-01-01 14:49:48.881 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising cmd channel zwave:device:9412cbc8:node68:switch_dimmer2 for PercentType
2020-01-01 14:49:48.869 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 78: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.881 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.882 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.882 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.882 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 78: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.883 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 78: SECURITY not supported
2020-01-01 14:49:48.883 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.883 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.884 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 78: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.884 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_general for OnOffType
2020-01-01 14:49:48.885 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 0F 01 F2 
2020-01-01 14:49:48.885 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 78: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@124b59
2020-01-01 14:49:48.885 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_general for OnOffType
2020-01-01 14:49:48.885 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.886 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.887 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3641: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.888 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.890 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.889 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Properties synchronised
2020-01-01 14:49:48.891 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3641: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.891 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_system for OnOffType
2020-01-01 14:49:48.891 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 78: Adding to device queue
2020-01-01 14:49:48.892 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.892 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_system for OnOffType
2020-01-01 14:49:48.892 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 78: Added 3691 to queue - size 16
2020-01-01 14:49:48.893 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.893 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.893 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3641: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.887 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 78: Device initialisation complete.
2020-01-01 14:49:48.895 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Controller status changed to ONLINE.
2020-01-01 14:49:48.889 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:switch_dimmer2 for PercentType
2020-01-01 14:49:48.888 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising Thing Node...
2020-01-01 14:49:48.896 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.897 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Initialising state channel zwave:device:9412cbc8:node68:switch_dimmer2 for PercentType
2020-01-01 14:49:48.893 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_power for OnOffType
2020-01-01 14:49:48.898 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating node properties.
2020-01-01 14:49:48.899 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_power for OnOffType
2020-01-01 14:49:48.899 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:scene_number for DecimalType
2020-01-01 14:49:48.899 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:scene_number for DecimalType
2020-01-01 14:49:48.900 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Polling initialised at 86400 seconds - start in 60652800 milliseconds.
2020-01-01 14:49:48.900 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.901 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3641: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.902 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 0F 01 
2020-01-01 14:49:48.903 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:sensor_power for DecimalType
2020-01-01 14:49:48.903 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: ProtocolInfo
2020-01-01 14:49:48.904 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_heat for OnOffType
2020-01-01 14:49:48.904 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:sensor_power for DecimalType
2020-01-01 14:49:48.904 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Listening = true
2020-01-01 14:49:48.905 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:meter_kwh for DecimalType
2020-01-01 14:49:48.905 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Routing   = true
2020-01-01 14:49:48.905 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Device initialisation complete.
2020-01-01 14:49:48.906 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:meter_kwh for DecimalType
2020-01-01 14:49:48.906 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating node properties. MAN=271
2020-01-01 14:49:48.905 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_heat for OnOffType
2020-01-01 14:49:48.906 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.907 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:meter_watts for DecimalType
2020-01-01 14:49:48.906 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Controller status changed to ONLINE.
2020-01-01 14:49:48.907 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:meter_watts for DecimalType
2020-01-01 14:49:48.907 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Properties synchronised
2020-01-01 14:49:48.908 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:meter_reset for OnOffType
2020-01-01 14:49:48.908 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.907 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.908 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 62: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@11956ae
2020-01-01 14:49:48.909 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:meter_reset for OnOffType
2020-01-01 14:49:48.909 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.909 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 62: Adding to device queue
2020-01-01 14:49:48.910 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.910 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 62: Added 3692 to queue - size 2
2020-01-01 14:49:48.911 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer1 for PercentType
2020-01-01 14:49:48.911 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.916 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Beaming   = true
2020-01-01 14:49:48.917 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer1 for PercentType
2020-01-01 14:49:48.917 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Version   = 4
2020-01-01 14:49:48.912 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Updating node properties.
2020-01-01 14:49:48.918 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: FLIRS     = false
2020-01-01 14:49:48.919 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Security  = false
2020-01-01 14:49:48.920 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Max Baud  = 40000
2020-01-01 14:49:48.920 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Updating node properties. MAN=271
2020-01-01 14:49:48.921 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer1 for PercentType
2020-01-01 14:49:48.921 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:48.921 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.922 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Generic  = GENERIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.922 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:sensor_power1 for DecimalType
2020-01-01 14:49:48.922 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:48.922 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 76: Specific = SPECIFIC_TYPE_REPEATER_SLAVE
2020-01-01 14:49:48.923 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.923 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:sensor_power1 for DecimalType
2020-01-01 14:49:48.923 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:48.923 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising Thing Node...
2020-01-01 14:49:48.923 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Properties synchronised
2020-01-01 14:49:48.924 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:scene_number for DecimalType
2020-01-01 14:49:48.924 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_general for OnOffType
2020-01-01 14:49:48.924 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_kwh1 for DecimalType
2020-01-01 14:49:48.925 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:scene_number for DecimalType
2020-01-01 14:49:48.925 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:sensor_power for DecimalType
2020-01-01 14:49:48.926 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_general for OnOffType
2020-01-01 14:49:48.926 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:sensor_power for DecimalType
2020-01-01 14:49:48.927 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:meter_kwh for DecimalType
2020-01-01 14:49:48.927 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_system for OnOffType
2020-01-01 14:49:48.928 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_system for OnOffType
2020-01-01 14:49:48.928 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:meter_kwh for DecimalType
2020-01-01 14:49:48.929 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_power for OnOffType
2020-01-01 14:49:48.930 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_power for OnOffType
2020-01-01 14:49:48.931 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_heat for OnOffType
2020-01-01 14:49:48.933 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_heat for OnOffType
2020-01-01 14:49:48.933 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.924 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:48.933 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:48.934 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 76: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:48.935 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:48.936 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 76: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:48.926 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_kwh1 for DecimalType
2020-01-01 14:49:48.937 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 76: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:48.937 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_watts1 for DecimalType
2020-01-01 14:49:48.937 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:meter_watts for DecimalType
2020-01-01 14:49:48.934 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.938 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_watts1 for DecimalType
2020-01-01 14:49:48.938 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.938 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:switch_dimmer1 for PercentType
2020-01-01 14:49:48.937 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.937 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_general1 for OnOffType
2020-01-01 14:49:48.939 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:switch_dimmer1 for PercentType
2020-01-01 14:49:48.940 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:switch_dimmer1 for PercentType
2020-01-01 14:49:48.940 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:meter_watts for DecimalType
2020-01-01 14:49:48.940 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising Thing Node...
2020-01-01 14:49:48.937 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3641: Transaction COMPLETED
2020-01-01 14:49:48.940 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_general1 for OnOffType
2020-01-01 14:49:48.941 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 55ms
2020-01-01 14:49:48.942 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3641: Transaction completed
2020-01-01 14:49:48.943 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3641 DONE
2020-01-01 14:49:48.943 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:meter_reset for OnOffType
2020-01-01 14:49:48.941 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:notification_send1 for DecimalType
2020-01-01 14:49:48.941 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.943 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:scene_number for DecimalType
2020-01-01 14:49:48.943 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:meter_reset for OnOffType
2020-01-01 14:49:48.942 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:sensor_power1 for DecimalType
2020-01-01 14:49:48.944 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising Thing Node...
2020-01-01 14:49:48.944 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.944 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:notification_send1 for DecimalType
2020-01-01 14:49:48.944 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:scene_number for DecimalType
2020-01-01 14:49:48.944 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:sensor_power1 for DecimalType
2020-01-01 14:49:48.945 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:scene_number for DecimalType
2020-01-01 14:49:48.945 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_system1 for OnOffType
2020-01-01 14:49:48.946 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.946 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:sensor_power for DecimalType
2020-01-01 14:49:48.946 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:48.946 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:meter_kwh1 for DecimalType
2020-01-01 14:49:48.946 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_system1 for OnOffType
2020-01-01 14:49:48.947 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:48.947 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_general for OnOffType
2020-01-01 14:49:48.948 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_power1 for OnOffType
2020-01-01 14:49:48.948 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 0B B1 
2020-01-01 14:49:48.947 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:meter_kwh1 for DecimalType
2020-01-01 14:49:48.949 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_power1 for OnOffType
2020-01-01 14:49:48.949 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:sensor_power for DecimalType
2020-01-01 14:49:48.949 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_general for OnOffType
2020-01-01 14:49:48.950 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_heat1 for OnOffType
2020-01-01 14:49:48.950 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:meter_watts1 for DecimalType
2020-01-01 14:49:48.947 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3641: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:48.946 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:scene_number for DecimalType
2020-01-01 14:49:48.951 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_heat1 for OnOffType
2020-01-01 14:49:48.951 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:sensor_power for DecimalType
2020-01-01 14:49:48.951 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.952 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:sensor_power for DecimalType
2020-01-01 14:49:48.952 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer2 for PercentType
2020-01-01 14:49:48.953 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer2 for PercentType
2020-01-01 14:49:48.953 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:meter_watts1 for DecimalType
2020-01-01 14:49:48.954 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 76: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1860271
2020-01-01 14:49:48.954 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:meter_kwh for DecimalType
2020-01-01 14:49:48.953 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:meter_kwh for DecimalType
2020-01-01 14:49:48.954 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 0B B1 
2020-01-01 14:49:48.955 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_general1 for OnOffType
2020-01-01 14:49:48.954 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer2 for PercentType
2020-01-01 14:49:48.950 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_system for OnOffType
2020-01-01 14:49:48.955 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:meter_kwh for DecimalType
2020-01-01 14:49:48.956 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 76: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:48.956 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Polling initialised at 86400 seconds - start in 18921600 milliseconds.
2020-01-01 14:49:48.956 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:48.957 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Device initialisation complete.
2020-01-01 14:49:48.957 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 76: Node advancer - advancing to PING
2020-01-01 14:49:48.957 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3642: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.957 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 76: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:48.957 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Controller status changed to ONLINE.
2020-01-01 14:49:48.958 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.958 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_general1 for OnOffType
2020-01-01 14:49:48.959 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 76: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:48.957 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:48.959 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 76: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:48.959 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:meter_kwh for DecimalType
2020-01-01 14:49:48.960 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Updating node properties.
2020-01-01 14:49:48.960 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 76: SECURITY not supported
2020-01-01 14:49:48.960 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Updating node properties. MAN=271
2020-01-01 14:49:48.960 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:meter_watts for DecimalType
2020-01-01 14:49:48.961 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 76: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:48.961 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 76: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@849e65
2020-01-01 14:49:48.961 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:notification_send1 for DecimalType
2020-01-01 14:49:48.961 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:meter_watts for DecimalType
2020-01-01 14:49:48.962 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 76: Adding to device queue
2020-01-01 14:49:48.962 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:notification_send1 for DecimalType
2020-01-01 14:49:48.963 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:meter_reset for OnOffType
2020-01-01 14:49:48.963 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 76: Added 3693 to queue - size 17
2020-01-01 14:49:48.961 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:48.957 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:meter_watts for DecimalType
2020-01-01 14:49:48.956 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_system for OnOffType
2020-01-01 14:49:48.960 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.963 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_system1 for OnOffType
2020-01-01 14:49:48.963 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:meter_reset for OnOffType
2020-01-01 14:49:48.964 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_system1 for OnOffType
2020-01-01 14:49:48.965 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.965 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.965 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_power1 for OnOffType
2020-01-01 14:49:48.966 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:meter_watts for DecimalType
2020-01-01 14:49:48.966 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:48.968 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:meter_reset for OnOffType
2020-01-01 14:49:48.968 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:48.969 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:48.970 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:48.969 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:meter_reset for OnOffType
2020-01-01 14:49:48.970 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_general for OnOffType
2020-01-01 14:49:48.967 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Properties synchronised
2020-01-01 14:49:48.971 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3642: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.971 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_power1 for OnOffType
2020-01-01 14:49:48.972 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_general for OnOffType
2020-01-01 14:49:48.974 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:48.974 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:alarm_heat1 for OnOffType
2020-01-01 14:49:48.975 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:48.972 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_power for OnOffType
2020-01-01 14:49:48.975 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:alarm_heat1 for OnOffType
2020-01-01 14:49:48.977 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_system for OnOffType
2020-01-01 14:49:48.977 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:switch_dimmer2 for OnOffType
2020-01-01 14:49:48.977 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_power for OnOffType
2020-01-01 14:49:48.978 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising cmd channel zwave:device:9412cbc8:node6:switch_dimmer2 for PercentType
2020-01-01 14:49:48.978 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_system for OnOffType
2020-01-01 14:49:48.972 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.978 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_heat for OnOffType
2020-01-01 14:49:48.978 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:switch_dimmer2 for PercentType
2020-01-01 14:49:48.979 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:config_decimal_param19 for DecimalType
2020-01-01 14:49:48.979 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_heat for OnOffType
2020-01-01 14:49:48.979 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising state channel zwave:device:9412cbc8:node6:switch_dimmer2 for PercentType
2020-01-01 14:49:48.980 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling initialised at 86400 seconds - start in 23932800 milliseconds.
2020-01-01 14:49:48.980 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_power for OnOffType
2020-01-01 14:49:48.980 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.981 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_general for OnOffType
2020-01-01 14:49:48.981 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Device initialisation complete.
2020-01-01 14:49:48.981 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3642: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.982 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_power for OnOffType
2020-01-01 14:49:48.982 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Controller status changed to ONLINE.
2020-01-01 14:49:48.982 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:48.983 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:switch_dimmer1 for PercentType
2020-01-01 14:49:48.983 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:48.983 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:48.983 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_general for OnOffType
2020-01-01 14:49:48.984 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_heat for OnOffType
2020-01-01 14:49:48.984 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:switch_dimmer1 for PercentType
2020-01-01 14:49:48.986 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3642: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:48.987 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Updating node properties.
2020-01-01 14:49:48.987 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_system for OnOffType
2020-01-01 14:49:48.987 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_system for OnOffType
2020-01-01 14:49:48.987 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Updating node properties. MAN=271
2020-01-01 14:49:48.987 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:48.988 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_power for OnOffType
2020-01-01 14:49:48.989 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: ProtocolInfo
2020-01-01 14:49:48.989 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_power for OnOffType
2020-01-01 14:49:48.990 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Listening = true
2020-01-01 14:49:48.990 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:48.991 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising Thing Node...
2020-01-01 14:49:48.992 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:scene_number for DecimalType
2020-01-01 14:49:48.993 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Routing   = true
2020-01-01 14:49:48.989 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_heat for OnOffType
2020-01-01 14:49:48.993 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:scene_number for DecimalType
2020-01-01 14:49:48.998 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_heat for OnOffType
2020-01-01 14:49:48.998 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:sensor_power for DecimalType
2020-01-01 14:49:48.999 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_heat for OnOffType
2020-01-01 14:49:48.999 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:sensor_power for DecimalType
2020-01-01 14:49:48.996 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:switch_dimmer1 for OnOffType
2020-01-01 14:49:48.994 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:switch_dimmer1 for PercentType
2020-01-01 14:49:49.001 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:switch_dimmer1 for PercentType
2020-01-01 14:49:49.001 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:meter_kwh for DecimalType
2020-01-01 14:49:48.994 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:49.002 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:switch_dimmer1 for PercentType
2020-01-01 14:49:49.000 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:switch_dimmer1 for OnOffType
2020-01-01 14:49:49.002 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Properties synchronised
2020-01-01 14:49:49.003 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:switch_dimmer1 for PercentType
2020-01-01 14:49:48.993 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Beaming   = true
2020-01-01 14:49:49.003 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:switch_dimmer1 for PercentType
2020-01-01 14:49:49.003 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Version   = 4
2020-01-01 14:49:49.004 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:meter_kwh for DecimalType
2020-01-01 14:49:49.003 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:sensor_power1 for DecimalType
2020-01-01 14:49:49.005 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:sensor_power1 for DecimalType
2020-01-01 14:49:49.004 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: FLIRS     = false
2020-01-01 14:49:49.007 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Security  = false
2020-01-01 14:49:49.007 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:meter_kwh1 for DecimalType
2020-01-01 14:49:49.006 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Update ASSOCIATION group_ZWaveAssociationGroup [index=3, name=null, profile1=null, profile2=null, associations=[node_1]]: Adding Controller (node_1)
2020-01-01 14:49:49.008 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Max Baud  = 40000
2020-01-01 14:49:49.004 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:switch_dimmer1 for PercentType
2020-01-01 14:49:49.008 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:meter_kwh1 for DecimalType
2020-01-01 14:49:49.008 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.009 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.009 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:meter_watts1 for DecimalType
2020-01-01 14:49:49.009 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:meter_watts for DecimalType
2020-01-01 14:49:49.010 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:meter_watts for DecimalType
2020-01-01 14:49:49.009 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:49.009 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:switch_dimmer1 for PercentType
2020-01-01 14:49:49.006 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:sensor_power1 for DecimalType
2020-01-01 14:49:49.011 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:sensor_power1 for DecimalType
2020-01-01 14:49:49.012 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:sensor_power1 for DecimalType
2020-01-01 14:49:49.014 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising Thing Node...
2020-01-01 14:49:49.014 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:meter_watts1 for DecimalType
2020-01-01 14:49:49.010 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 11: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.015 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.012 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:sensor_power1 for DecimalType
2020-01-01 14:49:49.015 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_general1 for OnOffType
2020-01-01 14:49:49.017 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.018 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.018 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:meter_reset for OnOffType
2020-01-01 14:49:49.019 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 11: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.016 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:scene_number for DecimalType
2020-01-01 14:49:49.019 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.019 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:meter_reset for OnOffType
2020-01-01 14:49:49.019 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:scene_number for DecimalType
2020-01-01 14:49:49.020 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 11: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.018 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:meter_kwh1 for DecimalType
2020-01-01 14:49:49.020 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.021 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 11: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.021 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_general1 for OnOffType
2020-01-01 14:49:49.021 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.021 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:sensor_binary1 for OnOffType
2020-01-01 14:49:49.022 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3642: Transaction COMPLETED
2020-01-01 14:49:49.013 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:meter_kwh1 for DecimalType
2020-01-01 14:49:49.022 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:meter_kwh1 for DecimalType
2020-01-01 14:49:49.022 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 65ms
2020-01-01 14:49:49.022 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_binary1 for OnOffType
2020-01-01 14:49:49.023 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3642: Transaction completed
2020-01-01 14:49:49.023 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_general for OnOffType
2020-01-01 14:49:49.024 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:notification_send1 for DecimalType
2020-01-01 14:49:49.024 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3642 DONE
2020-01-01 14:49:49.024 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:meter_kwh1 for DecimalType
2020-01-01 14:49:49.024 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:notification_send1 for DecimalType
2020-01-01 14:49:49.025 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_general for OnOffType
2020-01-01 14:49:49.025 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_binary1 for OnOffType
2020-01-01 14:49:49.025 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.026 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:meter_watts1 for DecimalType
2020-01-01 14:49:49.025 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_system1 for OnOffType
2020-01-01 14:49:49.026 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.026 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_system for OnOffType
2020-01-01 14:49:49.027 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_system1 for OnOffType
2020-01-01 14:49:49.027 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3642: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.026 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:meter_watts1 for DecimalType
2020-01-01 14:49:49.027 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 2F 95 
2020-01-01 14:49:49.028 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:alarm_general1 for OnOffType
2020-01-01 14:49:49.028 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 2F 95 
2020-01-01 14:49:49.026 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:meter_watts1 for DecimalType
2020-01-01 14:49:49.028 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_system for OnOffType
2020-01-01 14:49:49.028 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_power1 for OnOffType
2020-01-01 14:49:49.029 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_power1 for OnOffType
2020-01-01 14:49:49.030 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:alarm_general1 for OnOffType
2020-01-01 14:49:49.030 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 11: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1c16c4e
2020-01-01 14:49:49.030 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 11: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.030 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:alarm_heat1 for OnOffType
2020-01-01 14:49:49.030 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:meter_watts1 for DecimalType
2020-01-01 14:49:49.031 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 11: Node advancer - advancing to PING
2020-01-01 14:49:49.031 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:alarm_heat1 for OnOffType
2020-01-01 14:49:49.031 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:sensor_binary2 for OnOffType
2020-01-01 14:49:49.031 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_power for OnOffType
2020-01-01 14:49:49.032 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.032 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_power for OnOffType
2020-01-01 14:49:49.032 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.032 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_binary2 for OnOffType
2020-01-01 14:49:49.033 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.034 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_binary2 for OnOffType
2020-01-01 14:49:49.034 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_general1 for OnOffType
2020-01-01 14:49:49.034 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 00 04 20 01 DC 
2020-01-01 14:49:49.034 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_heat for OnOffType
2020-01-01 14:49:49.035 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:alarm_general2 for OnOffType
2020-01-01 14:49:49.032 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.036 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:switch_dimmer2 for OnOffType
2020-01-01 14:49:49.036 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:alarm_general2 for OnOffType
2020-01-01 14:49:49.036 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_general1 for OnOffType
2020-01-01 14:49:49.035 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_heat for OnOffType
2020-01-01 14:49:49.037 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 11: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.037 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising cmd channel zwave:device:9412cbc8:node7:switch_dimmer2 for PercentType
2020-01-01 14:49:49.037 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 11: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.037 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:sensor_temperature3 for QuantityType
2020-01-01 14:49:49.038 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:switch_dimmer2 for PercentType
2020-01-01 14:49:49.038 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 11: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.038 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:notification_send1 for DecimalType
2020-01-01 14:49:49.038 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_temperature3 for QuantityType
2020-01-01 14:49:49.039 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Initialising state channel zwave:device:9412cbc8:node7:switch_dimmer2 for PercentType
2020-01-01 14:49:49.039 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 11: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.039 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Polling initialised at 86400 seconds - start in 67564800 milliseconds.
2020-01-01 14:49:49.039 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 11: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@c3fa12
2020-01-01 14:49:49.039 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:notification_send1 for DecimalType
2020-01-01 14:49:49.040 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:sensor_temperature4 for QuantityType
2020-01-01 14:49:49.040 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Device initialisation complete.
2020-01-01 14:49:49.041 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Controller status changed to ONLINE.
2020-01-01 14:49:49.041 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:49.041 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_temperature4 for QuantityType
2020-01-01 14:49:49.043 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Updating node properties.
2020-01-01 14:49:49.044 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:switch_dimmer1 for OnOffType
2020-01-01 14:49:49.044 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Updating node properties. MAN=271
2020-01-01 14:49:49.045 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:sensor_temperature5 for QuantityType
2020-01-01 14:49:49.044 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_system1 for OnOffType
2020-01-01 14:49:49.045 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:49.029 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_general1 for OnOffType
2020-01-01 14:49:49.045 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:switch_dimmer1 for PercentType
2020-01-01 14:49:49.048 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Properties synchronised
2020-01-01 14:49:49.048 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:switch_dimmer1 for PercentType
2020-01-01 14:49:49.049 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_temperature5 for QuantityType
2020-01-01 14:49:49.050 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:49.049 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_general1 for OnOffType
2020-01-01 14:49:49.051 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3643: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.052 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:switch_dimmer1 for PercentType
2020-01-01 14:49:49.052 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 11: Adding to device queue
2020-01-01 14:49:49.052 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:notification_send1 for DecimalType
2020-01-01 14:49:49.053 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:sensor_power1 for DecimalType
2020-01-01 14:49:49.053 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 11: Added 3694 to queue - size 18
2020-01-01 14:49:49.053 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:notification_send1 for DecimalType
2020-01-01 14:49:49.053 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.053 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising cmd channel zwave:device:9412cbc8:node48:sensor_temperature6 for QuantityType
2020-01-01 14:49:49.053 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_system1 for OnOffType
2020-01-01 14:49:49.052 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_system1 for OnOffType
2020-01-01 14:49:49.054 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_system1 for OnOffType
2020-01-01 14:49:49.054 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Initialising state channel zwave:device:9412cbc8:node48:sensor_temperature6 for QuantityType
2020-01-01 14:49:49.053 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:sensor_power1 for DecimalType
2020-01-01 14:49:49.055 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_power1 for OnOffType
2020-01-01 14:49:49.055 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:meter_kwh1 for DecimalType
2020-01-01 14:49:49.055 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_power1 for OnOffType
2020-01-01 14:49:49.056 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_power1 for OnOffType
2020-01-01 14:49:49.056 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Polling initialised at 1800 seconds - start in 1033200 milliseconds.
2020-01-01 14:49:49.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:alarm_heat1 for OnOffType
2020-01-01 14:49:49.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:alarm_heat1 for OnOffType
2020-01-01 14:49:49.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_power1 for OnOffType
2020-01-01 14:49:49.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:meter_kwh1 for DecimalType
2020-01-01 14:49:49.056 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.058 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:meter_watts1 for DecimalType
2020-01-01 14:49:49.058 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:switch_dimmer2 for OnOffType
2020-01-01 14:49:49.059 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:meter_watts1 for DecimalType
2020-01-01 14:49:49.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:alarm_heat1 for OnOffType
2020-01-01 14:49:49.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 48: Device initialisation complete.
2020-01-01 14:49:49.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:alarm_heat1 for OnOffType
2020-01-01 14:49:49.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising cmd channel zwave:device:9412cbc8:node8:switch_dimmer2 for PercentType
2020-01-01 14:49:49.061 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_general1 for OnOffType
2020-01-01 14:49:49.062 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_general1 for OnOffType
2020-01-01 14:49:49.062 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3643: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.063 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:notification_send1 for DecimalType
2020-01-01 14:49:49.063 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:notification_send1 for DecimalType
2020-01-01 14:49:49.064 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.064 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_system1 for OnOffType
2020-01-01 14:49:49.064 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_system1 for OnOffType
2020-01-01 14:49:49.065 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:49.065 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_power1 for OnOffType
2020-01-01 14:49:49.065 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:49.060 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Controller status changed to ONLINE.
2020-01-01 14:49:49.066 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:49.066 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_power1 for OnOffType
2020-01-01 14:49:49.066 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:49.067 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising Thing Node...
2020-01-01 14:49:49.067 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3643: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.067 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:scene_number for DecimalType
2020-01-01 14:49:49.061 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:switch_dimmer2 for OnOffType
2020-01-01 14:49:49.068 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:switch_dimmer2 for PercentType
2020-01-01 14:49:49.068 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:alarm_heat1 for OnOffType
2020-01-01 14:49:49.068 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:scene_number for DecimalType
2020-01-01 14:49:49.068 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:alarm_heat1 for OnOffType
2020-01-01 14:49:49.069 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:sensor_power for DecimalType
2020-01-01 14:49:49.069 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.069 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising cmd channel zwave:device:9412cbc8:node10:switch_dimmer2 for PercentType
2020-01-01 14:49:49.070 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:switch_dimmer2 for OnOffType
2020-01-01 14:49:49.070 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3643: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.071 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising cmd channel zwave:device:9412cbc8:node11:switch_dimmer2 for PercentType
2020-01-01 14:49:49.071 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:49.072 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: ProtocolInfo
2020-01-01 14:49:49.072 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:switch_dimmer2 for PercentType
2020-01-01 14:49:49.072 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Listening = true
2020-01-01 14:49:49.073 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Routing   = true
2020-01-01 14:49:49.074 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Beaming   = true
2020-01-01 14:49:49.075 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Version   = 4
2020-01-01 14:49:49.069 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Initialising state channel zwave:device:9412cbc8:node8:switch_dimmer2 for PercentType
2020-01-01 14:49:49.077 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Polling initialised at 86400 seconds - start in 80006400 milliseconds.
2020-01-01 14:49:49.077 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:sensor_power for DecimalType
2020-01-01 14:49:49.078 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Device initialisation complete.
2020-01-01 14:49:49.079 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Controller status changed to ONLINE.
2020-01-01 14:49:49.071 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:switch_dimmer2 for PercentType
2020-01-01 14:49:49.080 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Initialising state channel zwave:device:9412cbc8:node11:switch_dimmer2 for PercentType
2020-01-01 14:49:49.081 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Polling initialised at 86400 seconds - start in 71884800 milliseconds.
2020-01-01 14:49:49.082 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Initialising state channel zwave:device:9412cbc8:node10:switch_dimmer2 for PercentType
2020-01-01 14:49:49.079 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Updating node properties.
2020-01-01 14:49:49.076 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: FLIRS     = false
2020-01-01 14:49:49.080 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:49.084 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Security  = false
2020-01-01 14:49:49.084 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Polling initialised at 86400 seconds - start in 58838400 milliseconds.
2020-01-01 14:49:49.085 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Device initialisation complete.
2020-01-01 14:49:49.085 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Updating node properties. MAN=271
2020-01-01 14:49:49.085 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:meter_kwh for DecimalType
2020-01-01 14:49:49.086 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:meter_kwh for DecimalType
2020-01-01 14:49:49.087 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Updating node properties.
2020-01-01 14:49:49.087 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:meter_watts for DecimalType
2020-01-01 14:49:49.086 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:49.088 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 11: Device initialisation complete.
2020-01-01 14:49:49.088 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Properties synchronised
2020-01-01 14:49:49.090 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:meter_watts for DecimalType
2020-01-01 14:49:49.088 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Max Baud  = 40000
2020-01-01 14:49:49.091 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:meter_reset for OnOffType
2020-01-01 14:49:49.092 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.092 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Controller status changed to ONLINE.
2020-01-01 14:49:49.093 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Controller is ONLINE. Starting device initialisation.
2020-01-01 14:49:49.093 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Generic  = GENERIC_TYPE_SENSOR_BINARY
2020-01-01 14:49:49.092 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:meter_reset for OnOffType
2020-01-01 14:49:49.094 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.095 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Updating node properties. MAN=271
2020-01-01 14:49:49.095 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.095 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Updating node properties.
2020-01-01 14:49:49.096 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:49.096 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Updating node properties. MAN=271
2020-01-01 14:49:49.096 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:alarm_heat for OnOffType
2020-01-01 14:49:49.097 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:49.097 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Properties synchronised
2020-01-01 14:49:49.097 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:alarm_heat for OnOffType
2020-01-01 14:49:49.099 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 47: Specific = SPECIFIC_TYPE_ROUTING_SENSOR_BINARY
2020-01-01 14:49:49.100 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:49.100 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.101 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:49.097 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Properties synchronised
2020-01-01 14:49:49.102 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising Thing Node...
2020-01-01 14:49:49.102 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:alarm_power for OnOffType
2020-01-01 14:49:49.102 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:49.103 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.103 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising Thing Node...
2020-01-01 14:49:49.103 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:alarm_power for OnOffType
2020-01-01 14:49:49.103 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:scene_number for DecimalType
2020-01-01 14:49:49.104 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:scene_number for DecimalType
2020-01-01 14:49:49.104 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:alarm_system for OnOffType
2020-01-01 14:49:49.104 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.105 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:scene_number for DecimalType
2020-01-01 14:49:49.105 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 47: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.105 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:sensor_binary1 for OnOffType
2020-01-01 14:49:49.106 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:scene_number for DecimalType
2020-01-01 14:49:49.107 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.107 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:sensor_power for DecimalType
2020-01-01 14:49:49.108 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:sensor_power for DecimalType
2020-01-01 14:49:49.108 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 47: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.109 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:meter_kwh for DecimalType
2020-01-01 14:49:49.109 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:meter_kwh for DecimalType
2020-01-01 14:49:49.110 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 47: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.110 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:meter_watts for DecimalType
2020-01-01 14:49:49.111 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:meter_watts for DecimalType
2020-01-01 14:49:49.111 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3643: Transaction COMPLETED
2020-01-01 14:49:49.112 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:meter_reset for OnOffType
2020-01-01 14:49:49.112 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:meter_reset for OnOffType
2020-01-01 14:49:49.113 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.114 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.115 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:49.115 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_general for OnOffType
2020-01-01 14:49:49.115 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 64ms
2020-01-01 14:49:49.116 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.
2020-01-01 14:49:49.116 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_binary1 for OnOffType
2020-01-01 14:49:49.116 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3643: Transaction completed
2020-01-01 14:49:49.116 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:alarm_system for OnOffType
2020-01-01 14:49:49.117 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3643 DONE
2020-01-01 14:49:49.117 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising Thing Node...
2020-01-01 14:49:49.117 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_binary1 for OnOffType
2020-01-01 14:49:49.118 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:scene_number for DecimalType
2020-01-01 14:49:49.118 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:switch_dimmer1 for OnOffType
2020-01-01 14:49:49.118 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:alarm_general1 for OnOffType
2020-01-01 14:49:49.119 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:alarm_general1 for OnOffType
2020-01-01 14:49:49.119 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.119 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:scene_number for DecimalType
2020-01-01 14:49:49.119 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:switch_dimmer1 for PercentType
2020-01-01 14:49:49.120 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.120 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:sensor_power for DecimalType
2020-01-01 14:49:49.116 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_general for OnOffType
2020-01-01 14:49:49.120 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:switch_dimmer1 for PercentType
2020-01-01 14:49:49.120 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:sensor_binary2 for OnOffType
2020-01-01 14:49:49.120 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:sensor_power for DecimalType
2020-01-01 14:49:49.120 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_binary2 for OnOffType
2020-01-01 14:49:49.121 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:switch_dimmer1 for PercentType
2020-01-01 14:49:49.121 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 2E 94 
2020-01-01 14:49:49.121 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:meter_kwh for DecimalType
2020-01-01 14:49:49.122 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:meter_kwh for DecimalType
2020-01-01 14:49:49.122 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 2E 94 
2020-01-01 14:49:49.122 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_binary2 for OnOffType
2020-01-01 14:49:49.122 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:sensor_power1 for DecimalType
2020-01-01 14:49:49.123 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:alarm_general2 for OnOffType
2020-01-01 14:49:49.123 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:meter_watts for DecimalType
2020-01-01 14:49:49.123 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.124 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:meter_watts for DecimalType
2020-01-01 14:49:49.124 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.125 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3643: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.125 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_system for OnOffType
2020-01-01 14:49:49.125 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3644: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.124 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:sensor_power1 for DecimalType
2020-01-01 14:49:49.124 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:alarm_general2 for OnOffType
2020-01-01 14:49:49.126 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:sensor_temperature3 for QuantityType
2020-01-01 14:49:49.126 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.126 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:meter_kwh1 for DecimalType
2020-01-01 14:49:49.127 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.127 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:meter_kwh1 for DecimalType
2020-01-01 14:49:49.128 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_system for OnOffType
2020-01-01 14:49:49.128 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 00 04 20 01 DC 
2020-01-01 14:49:49.129 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3644: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.127 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_temperature3 for QuantityType
2020-01-01 14:49:49.129 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:49.130 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:sensor_temperature4 for QuantityType
2020-01-01 14:49:49.130 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 47: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@145d0d4
2020-01-01 14:49:49.130 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_temperature4 for QuantityType
2020-01-01 14:49:49.131 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 47: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.131 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:sensor_temperature5 for QuantityType
2020-01-01 14:49:49.131 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 47: Node advancer - advancing to PING
2020-01-01 14:49:49.132 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_temperature5 for QuantityType
2020-01-01 14:49:49.132 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 47: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.132 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising cmd channel zwave:device:9412cbc8:node43:sensor_temperature6 for QuantityType
2020-01-01 14:49:49.133 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 47: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.134 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 47: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.135 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 47: SECURITY not supported
2020-01-01 14:49:49.129 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_power for OnOffType
2020-01-01 14:49:49.136 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_power for OnOffType
2020-01-01 14:49:49.129 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:meter_watts1 for DecimalType
2020-01-01 14:49:49.135 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 47: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.136 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Initialising state channel zwave:device:9412cbc8:node43:sensor_temperature6 for QuantityType
2020-01-01 14:49:49.130 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.137 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 47: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@475498
2020-01-01 14:49:49.137 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_heat for OnOffType
2020-01-01 14:49:49.137 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:meter_reset for OnOffType
2020-01-01 14:49:49.138 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:meter_watts1 for DecimalType
2020-01-01 14:49:49.138 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 47: Adding to device queue
2020-01-01 14:49:49.138 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_heat for OnOffType
2020-01-01 14:49:49.138 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:meter_reset for OnOffType
2020-01-01 14:49:49.139 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:switch_dimmer1 for OnOffType
2020-01-01 14:49:49.139 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 47: Added 3695 to queue - size 19
2020-01-01 14:49:49.139 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.139 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:alarm_heat1 for OnOffType
2020-01-01 14:49:49.140 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.140 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:config_decimal_param19 for DecimalType
2020-01-01 14:49:49.140 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:switch_dimmer1 for PercentType
2020-01-01 14:49:49.141 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:switch_dimmer1 for PercentType
2020-01-01 14:49:49.141 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:alarm_heat1 for OnOffType
2020-01-01 14:49:49.141 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:alarm_heat for OnOffType
2020-01-01 14:49:49.142 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:alarm_heat for OnOffType
2020-01-01 14:49:49.142 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:switch_dimmer1 for PercentType
2020-01-01 14:49:49.142 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:alarm_power1 for OnOffType
2020-01-01 14:49:49.142 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Polling initialised at 1800 seconds - start in 640800 milliseconds.
2020-01-01 14:49:49.143 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:alarm_power for OnOffType
2020-01-01 14:49:49.143 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:sensor_power1 for DecimalType
2020-01-01 14:49:49.144 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Device initialisation complete.
2020-01-01 14:49:49.144 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:alarm_power for OnOffType
2020-01-01 14:49:49.141 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:49.143 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:alarm_power1 for OnOffType
2020-01-01 14:49:49.145 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3644: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.145 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:alarm_system1 for OnOffType
2020-01-01 14:49:49.145 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:sensor_power1 for DecimalType
2020-01-01 14:49:49.145 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:alarm_system for OnOffType
2020-01-01 14:49:49.146 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.146 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:meter_kwh1 for DecimalType
2020-01-01 14:49:49.146 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:alarm_system1 for OnOffType
2020-01-01 14:49:49.146 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:alarm_system for OnOffType
2020-01-01 14:49:49.146 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:meter_kwh1 for DecimalType
2020-01-01 14:49:49.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:switch_dimmer2 for OnOffType
2020-01-01 14:49:49.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:switch_dimmer1 for OnOffType
2020-01-01 14:49:49.147 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3644: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:meter_watts1 for DecimalType
2020-01-01 14:49:49.148 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising cmd channel zwave:device:9412cbc8:node67:switch_dimmer2 for PercentType
2020-01-01 14:49:49.148 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:switch_dimmer1 for PercentType
2020-01-01 14:49:49.148 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:switch_dimmer1 for PercentType
2020-01-01 14:49:49.148 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:meter_watts1 for DecimalType
2020-01-01 14:49:49.149 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 00 04 20 01 
2020-01-01 14:49:49.149 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:switch_dimmer2 for PercentType
2020-01-01 14:49:49.149 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:switch_dimmer1 for PercentType
2020-01-01 14:49:49.149 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_general1 for OnOffType
2020-01-01 14:49:49.150 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: ProtocolInfo
2020-01-01 14:49:49.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Initialising state channel zwave:device:9412cbc8:node67:switch_dimmer2 for PercentType
2020-01-01 14:49:49.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_general1 for OnOffType
2020-01-01 14:49:49.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:sensor_power1 for DecimalType
2020-01-01 14:49:49.151 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Listening = true
2020-01-01 14:49:49.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:sensor_power1 for DecimalType
2020-01-01 14:49:49.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:notification_send1 for DecimalType
2020-01-01 14:49:49.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Polling initialised at 86400 seconds - start in 65577600 milliseconds.
2020-01-01 14:49:49.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Device initialisation complete.
2020-01-01 14:49:49.151 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Routing   = true
2020-01-01 14:49:49.151 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:notification_send1 for DecimalType
2020-01-01 14:49:49.152 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:meter_kwh1 for DecimalType
2020-01-01 14:49:49.152 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Beaming   = true
2020-01-01 14:49:49.152 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:meter_kwh1 for DecimalType
2020-01-01 14:49:49.152 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_system1 for OnOffType
2020-01-01 14:49:49.153 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_system1 for OnOffType
2020-01-01 14:49:49.153 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Version   = 4
2020-01-01 14:49:49.153 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:meter_watts1 for DecimalType
2020-01-01 14:49:49.154 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:meter_watts1 for DecimalType
2020-01-01 14:49:49.154 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: FLIRS     = false
2020-01-01 14:49:49.154 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_power1 for OnOffType
2020-01-01 14:49:49.154 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_power1 for OnOffType
2020-01-01 14:49:49.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:alarm_heat1 for OnOffType
2020-01-01 14:49:49.155 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Security  = false
2020-01-01 14:49:49.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:alarm_heat1 for OnOffType
2020-01-01 14:49:49.155 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:alarm_heat1 for OnOffType
2020-01-01 14:49:49.156 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Max Baud  = 40000
2020-01-01 14:49:49.156 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:alarm_heat1 for OnOffType
2020-01-01 14:49:49.156 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:alarm_power1 for OnOffType
2020-01-01 14:49:49.157 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:alarm_power1 for OnOffType
2020-01-01 14:49:49.157 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:switch_dimmer2 for OnOffType
2020-01-01 14:49:49.157 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:alarm_system1 for OnOffType
2020-01-01 14:49:49.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising cmd channel zwave:device:9412cbc8:node70:switch_dimmer2 for PercentType
2020-01-01 14:49:49.158 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Generic  = GENERIC_TYPE_SENSOR_BINARY
2020-01-01 14:49:49.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:alarm_system1 for OnOffType
2020-01-01 14:49:49.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:switch_dimmer2 for PercentType
2020-01-01 14:49:49.159 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Initialising state channel zwave:device:9412cbc8:node70:switch_dimmer2 for PercentType
2020-01-01 14:49:49.159 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:switch_dimmer2 for OnOffType
2020-01-01 14:49:49.159 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 46: Specific = SPECIFIC_TYPE_ROUTING_SENSOR_BINARY
2020-01-01 14:49:49.160 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.160 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Polling initialised at 86400 seconds - start in 3196800 milliseconds.
2020-01-01 14:49:49.160 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising cmd channel zwave:device:9412cbc8:node69:switch_dimmer2 for PercentType
2020-01-01 14:49:49.160 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Device initialisation complete.
2020-01-01 14:49:49.160 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:switch_dimmer2 for PercentType
2020-01-01 14:49:49.161 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.161 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Initialising state channel zwave:device:9412cbc8:node69:switch_dimmer2 for PercentType
2020-01-01 14:49:49.161 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.162 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Polling initialised at 86400 seconds - start in 6998400 milliseconds.
2020-01-01 14:49:49.162 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 46: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.163 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Device initialisation complete.
2020-01-01 14:49:49.163 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.164 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 46: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.165 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 46: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.165 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3644: Transaction COMPLETED
2020-01-01 14:49:49.177 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 53ms
2020-01-01 14:49:49.178 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3644: Transaction completed
2020-01-01 14:49:49.179 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3644 DONE
2020-01-01 14:49:49.180 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.180 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3644: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.181 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.181 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 46: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@9160b3
2020-01-01 14:49:49.182 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 46: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.182 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 19 A3 
2020-01-01 14:49:49.183 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 46: Node advancer - advancing to PING
2020-01-01 14:49:49.183 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 19 A3 
2020-01-01 14:49:49.183 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 46: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.185 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 46: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.186 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.187 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.188 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.189 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.189 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3645: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.190 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.191 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3645: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.191 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.192 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.193 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.195 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 46: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.196 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 46: SECURITY not supported
2020-01-01 14:49:49.197 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.197 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 46: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.198 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 46: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@193efc5
2020-01-01 14:49:49.198 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.198 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 46: Adding to device queue
2020-01-01 14:49:49.199 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3645: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.199 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 46: Added 3696 to queue - size 20
2020-01-01 14:49:49.200 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.201 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.203 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3645: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.204 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.205 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: ProtocolInfo
2020-01-01 14:49:49.206 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Listening = true
2020-01-01 14:49:49.207 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Routing   = true
2020-01-01 14:49:49.208 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Beaming   = true
2020-01-01 14:49:49.209 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Version   = 4
2020-01-01 14:49:49.210 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: FLIRS     = false
2020-01-01 14:49:49.211 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Security  = false
2020-01-01 14:49:49.212 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Max Baud  = 40000
2020-01-01 14:49:49.213 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.213 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.215 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 25: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.215 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.216 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.217 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.218 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 25: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.219 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.220 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 25: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.221 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 25: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.222 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3645: Transaction COMPLETED
2020-01-01 14:49:49.223 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 34ms
2020-01-01 14:49:49.224 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3645: Transaction completed
2020-01-01 14:49:49.224 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3645 DONE
2020-01-01 14:49:49.226 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.226 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3645: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.227 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.227 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 25: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@11d24ec
2020-01-01 14:49:49.227 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 25: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.228 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 16 AC 
2020-01-01 14:49:49.228 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 25: Node advancer - advancing to PING
2020-01-01 14:49:49.229 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 25: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.229 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 16 AC 
2020-01-01 14:49:49.230 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.232 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.233 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.231 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3646: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.235 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.235 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.235 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 25: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.236 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3646: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.236 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 25: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.237 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.303 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.303 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 25: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.237 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.304 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.305 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 25: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.306 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 25: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1fb26b
2020-01-01 14:49:49.306 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.307 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 25: Adding to device queue
2020-01-01 14:49:49.307 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3646: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.307 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 25: Added 3697 to queue - size 21
2020-01-01 14:49:49.308 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.309 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3646: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.310 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.310 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.310 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: ProtocolInfo
2020-01-01 14:49:49.312 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Listening = true
2020-01-01 14:49:49.312 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Routing   = true
2020-01-01 14:49:49.313 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Beaming   = true
2020-01-01 14:49:49.314 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Version   = 4
2020-01-01 14:49:49.315 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: FLIRS     = false
2020-01-01 14:49:49.316 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Security  = false
2020-01-01 14:49:49.317 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Max Baud  = 40000
2020-01-01 14:49:49.318 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.319 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.320 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 22: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.321 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.321 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.322 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.323 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 22: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.324 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.325 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 22: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.326 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 22: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.327 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3646: Transaction COMPLETED
2020-01-01 14:49:49.328 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 97ms
2020-01-01 14:49:49.329 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3646: Transaction completed
2020-01-01 14:49:49.330 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3646 DONE
2020-01-01 14:49:49.331 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.331 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3646: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.332 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1faa23
2020-01-01 14:49:49.333 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.333 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Node advancer - advancing to PING
2020-01-01 14:49:49.334 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.336 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 22: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.338 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.339 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.340 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 0C B6 
2020-01-01 14:49:49.340 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 22: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.341 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 0C B6 
2020-01-01 14:49:49.341 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 22: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.342 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 22: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@202378
2020-01-01 14:49:49.342 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.343 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.343 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3647: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.344 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 22: Adding to device queue
2020-01-01 14:49:49.344 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.345 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.345 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 22: Added 3698 to queue - size 22
2020-01-01 14:49:49.346 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3647: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.346 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.346 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.347 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.348 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.348 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.349 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.350 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.351 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3647: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.352 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.353 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3647: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.354 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.355 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: ProtocolInfo
2020-01-01 14:49:49.355 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Listening = true
2020-01-01 14:49:49.357 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Routing   = true
2020-01-01 14:49:49.357 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Beaming   = true
2020-01-01 14:49:49.358 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Version   = 4
2020-01-01 14:49:49.359 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: FLIRS     = false
2020-01-01 14:49:49.360 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Security  = false
2020-01-01 14:49:49.360 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Max Baud  = 40000
2020-01-01 14:49:49.362 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.362 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.363 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 12: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.364 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.365 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.366 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.367 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 12: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.368 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.369 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 12: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.369 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 12: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.371 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3647: Transaction COMPLETED
2020-01-01 14:49:49.371 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 28ms
2020-01-01 14:49:49.372 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3647: Transaction completed
2020-01-01 14:49:49.373 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3647 DONE
2020-01-01 14:49:49.375 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.375 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3647: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.377 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 12: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1402d54
2020-01-01 14:49:49.378 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 12: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.378 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 12: Node advancer - advancing to PING
2020-01-01 14:49:49.379 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 12: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.380 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 12: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.381 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 12: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.381 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 12: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.382 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 12: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.382 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 12: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@42a518
2020-01-01 14:49:49.387 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.389 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 31 8B 
2020-01-01 14:49:49.390 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 31 8B 
2020-01-01 14:49:49.392 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.393 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.393 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3648: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.394 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.395 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 12: Adding to device queue
2020-01-01 14:49:49.396 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:49.396 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 12: Added 3699 to queue - size 23
2020-01-01 14:49:49.397 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.398 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.398 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.399 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3648: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.399 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.401 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.403 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3648: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.405 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.406 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3648: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.408 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.409 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: ProtocolInfo
2020-01-01 14:49:49.410 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Listening = true
2020-01-01 14:49:49.411 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Routing   = true
2020-01-01 14:49:49.412 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Beaming   = true
2020-01-01 14:49:49.413 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Version   = 4
2020-01-01 14:49:49.414 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: FLIRS     = false
2020-01-01 14:49:49.415 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Security  = false
2020-01-01 14:49:49.416 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Max Baud  = 40000
2020-01-01 14:49:49.417 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.418 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:49.418 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 49: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:49.420 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.420 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.422 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.422 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 49: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.424 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.424 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 49: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.426 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 49: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.426 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3648: Transaction COMPLETED
2020-01-01 14:49:49.428 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 35ms
2020-01-01 14:49:49.429 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3648: Transaction completed
2020-01-01 14:49:49.431 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3648 DONE
2020-01-01 14:49:49.433 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.433 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3648: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.434 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.434 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 49: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@cdf8fc
2020-01-01 14:49:49.435 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 49: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.436 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 34 8E 
2020-01-01 14:49:49.436 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 49: Node advancer - advancing to PING
2020-01-01 14:49:49.437 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 49: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.438 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 34 8E 
2020-01-01 14:49:49.438 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 49: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.439 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 49: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.440 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 49: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.441 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.441 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 49: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.442 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 49: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1cf6281
2020-01-01 14:49:49.442 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3650: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.442 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.444 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.445 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 49: Adding to device queue
2020-01-01 14:49:49.445 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.446 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 49: Added 3700 to queue - size 24
2020-01-01 14:49:49.446 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3650: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.447 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:49.447 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.447 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.447 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.448 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.449 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.450 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.451 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3650: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.452 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.453 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3650: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.454 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.455 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: ProtocolInfo
2020-01-01 14:49:49.456 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Listening = true
2020-01-01 14:49:49.456 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Routing   = true
2020-01-01 14:49:49.457 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Beaming   = true
2020-01-01 14:49:49.458 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Version   = 4
2020-01-01 14:49:49.459 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: FLIRS     = false
2020-01-01 14:49:49.461 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Security  = false
2020-01-01 14:49:49.463 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Max Baud  = 40000
2020-01-01 14:49:49.464 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.465 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:49.465 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 52: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:49.467 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.468 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.469 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.470 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 52: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.471 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.472 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 52: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.473 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 52: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.474 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3650: Transaction COMPLETED
2020-01-01 14:49:49.475 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 33ms
2020-01-01 14:49:49.475 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3650: Transaction completed
2020-01-01 14:49:49.476 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3650 DONE
2020-01-01 14:49:49.477 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.477 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3650: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.478 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.479 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 52: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@10aba49
2020-01-01 14:49:49.479 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 52: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.479 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 08 B2 
2020-01-01 14:49:49.480 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 52: Node advancer - advancing to PING
2020-01-01 14:49:49.480 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 08 B2 
2020-01-01 14:49:49.481 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 52: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.481 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.482 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 52: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.482 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.483 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 52: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.483 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.484 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3651: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.485 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 52: SECURITY not supported
2020-01-01 14:49:49.486 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 52: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.487 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.487 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.487 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 52: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@8344c
2020-01-01 14:49:49.488 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 52: Adding to device queue
2020-01-01 14:49:49.488 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3651: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.488 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.489 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 52: Added 3701 to queue - size 25
2020-01-01 14:49:49.489 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.489 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.491 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.491 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3651: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.492 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.493 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3651: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.494 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.495 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: ProtocolInfo
2020-01-01 14:49:49.496 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Listening = true
2020-01-01 14:49:49.497 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Routing   = true
2020-01-01 14:49:49.498 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Beaming   = true
2020-01-01 14:49:49.499 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Version   = 4
2020-01-01 14:49:49.500 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: FLIRS     = false
2020-01-01 14:49:49.500 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Security  = false
2020-01-01 14:49:49.501 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Max Baud  = 40000
2020-01-01 14:49:49.502 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.503 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.504 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 8: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.505 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.505 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.506 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.507 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.508 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.509 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.510 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.510 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3651: Transaction COMPLETED
2020-01-01 14:49:49.512 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 30ms
2020-01-01 14:49:49.513 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3651: Transaction completed
2020-01-01 14:49:49.514 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3651 DONE
2020-01-01 14:49:49.515 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.515 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3651: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.516 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 8: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@146b8e
2020-01-01 14:49:49.517 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 8: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.517 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 8: Node advancer - advancing to PING
2020-01-01 14:49:49.518 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.521 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 8: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.522 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.524 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 8: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.525 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.525 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 15 AF 
2020-01-01 14:49:49.526 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.527 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 15 AF 
2020-01-01 14:49:49.527 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@116f468
2020-01-01 14:49:49.527 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.528 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3652: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.528 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.529 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Adding to device queue
2020-01-01 14:49:49.529 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.530 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.530 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Added 3702 to queue - size 26
2020-01-01 14:49:49.530 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3652: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.530 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.531 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.531 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.532 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.532 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.533 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.534 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.534 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3652: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.535 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.535 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3652: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.536 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.537 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: ProtocolInfo
2020-01-01 14:49:49.537 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Listening = true
2020-01-01 14:49:49.538 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Routing   = true
2020-01-01 14:49:49.538 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Beaming   = true
2020-01-01 14:49:49.539 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Version   = 4
2020-01-01 14:49:49.540 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: FLIRS     = false
2020-01-01 14:49:49.541 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Security  = false
2020-01-01 14:49:49.541 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Max Baud  = 40000
2020-01-01 14:49:49.542 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.542 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.542 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 21: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.543 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.544 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.544 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.545 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 21: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.545 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.546 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.547 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 21: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.547 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3652: Transaction COMPLETED
2020-01-01 14:49:49.548 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 20ms
2020-01-01 14:49:49.548 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3652: Transaction completed
2020-01-01 14:49:49.549 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3652 DONE
2020-01-01 14:49:49.550 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3652: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.550 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.551 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.551 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 21: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@a36e08
2020-01-01 14:49:49.552 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 21: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.553 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 2A 90 
2020-01-01 14:49:49.553 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 21: Node advancer - advancing to PING
2020-01-01 14:49:49.554 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.554 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 2A 90 
2020-01-01 14:49:49.555 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.555 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 21: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.556 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.557 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.556 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 21: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.559 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.556 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3653: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.556 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 21: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.561 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.561 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 21: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.561 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.562 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3653: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.562 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 21: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1a1e778
2020-01-01 14:49:49.563 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 21: Adding to device queue
2020-01-01 14:49:49.563 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 21: Added 3703 to queue - size 27
2020-01-01 14:49:49.564 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.565 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.565 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.566 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3653: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.566 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.567 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3653: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.568 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.568 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: ProtocolInfo
2020-01-01 14:49:49.569 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Listening = true
2020-01-01 14:49:49.569 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Routing   = true
2020-01-01 14:49:49.570 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Beaming   = true
2020-01-01 14:49:49.570 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Version   = 4
2020-01-01 14:49:49.571 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: FLIRS     = false
2020-01-01 14:49:49.572 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Security  = false
2020-01-01 14:49:49.573 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Max Baud  = 40000
2020-01-01 14:49:49.573 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.574 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.574 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 42: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.575 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.575 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.576 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.577 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 42: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.587 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.588 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 42: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.589 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 42: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.589 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3653: Transaction COMPLETED
2020-01-01 14:49:49.590 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 34ms
2020-01-01 14:49:49.590 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3653: Transaction completed
2020-01-01 14:49:49.591 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3653 DONE
2020-01-01 14:49:49.592 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.592 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3653: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.592 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.593 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 42: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@9ff179
2020-01-01 14:49:49.593 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 42: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.593 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 29 93 
2020-01-01 14:49:49.594 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 42: Node advancer - advancing to PING
2020-01-01 14:49:49.594 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 29 93 
2020-01-01 14:49:49.594 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 42: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.595 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.595 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3654: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.596 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 42: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.597 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.599 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.600 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 42: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.601 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.601 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 42: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.602 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.602 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 42: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.603 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 42: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@19d750e
2020-01-01 14:49:49.603 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 42: Adding to device queue
2020-01-01 14:49:49.604 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3654: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.604 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 42: Added 3704 to queue - size 28
2020-01-01 14:49:49.605 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.605 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.606 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.607 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.608 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3654: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.609 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.610 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3654: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.611 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.612 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: ProtocolInfo
2020-01-01 14:49:49.613 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Listening = true
2020-01-01 14:49:49.614 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Routing   = true
2020-01-01 14:49:49.614 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Beaming   = true
2020-01-01 14:49:49.615 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Version   = 4
2020-01-01 14:49:49.616 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: FLIRS     = false
2020-01-01 14:49:49.617 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Security  = false
2020-01-01 14:49:49.617 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Max Baud  = 40000
2020-01-01 14:49:49.618 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.619 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.620 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 41: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.621 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.623 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.624 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.625 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 41: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.626 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.628 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 41: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.628 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 41: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.629 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3654: Transaction COMPLETED
2020-01-01 14:49:49.630 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 35ms
2020-01-01 14:49:49.631 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3654: Transaction completed
2020-01-01 14:49:49.632 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3654 DONE
2020-01-01 14:49:49.633 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.633 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3654: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.634 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.635 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 41: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@14f7849
2020-01-01 14:49:49.635 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 50 EA 
2020-01-01 14:49:49.636 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 41: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.636 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 50 EA 
2020-01-01 14:49:49.637 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 41: Node advancer - advancing to PING
2020-01-01 14:49:49.637 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.638 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 41: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.638 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.639 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 41: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.639 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.639 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 41: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.640 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 41: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.640 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 41: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.641 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:49.641 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 41: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@4de884
2020-01-01 14:49:49.642 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3655: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.643 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.644 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 41: Adding to device queue
2020-01-01 14:49:49.645 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 41: Added 3705 to queue - size 29
2020-01-01 14:49:49.646 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.647 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.648 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3655: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.649 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.650 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.651 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3655: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.653 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.654 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3655: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.655 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.656 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: ProtocolInfo
2020-01-01 14:49:49.657 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Listening = true
2020-01-01 14:49:49.658 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Routing   = true
2020-01-01 14:49:49.659 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Beaming   = true
2020-01-01 14:49:49.660 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Version   = 4
2020-01-01 14:49:49.661 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: FLIRS     = false
2020-01-01 14:49:49.662 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Security  = false
2020-01-01 14:49:49.663 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Max Baud  = 40000
2020-01-01 14:49:49.664 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.665 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:49.666 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 80: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:49.667 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.669 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.670 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.671 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 80: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.672 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.673 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 80: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.674 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 80: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.675 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3655: Transaction COMPLETED
2020-01-01 14:49:49.676 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 34ms
2020-01-01 14:49:49.678 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3655: Transaction completed
2020-01-01 14:49:49.679 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3655 DONE
2020-01-01 14:49:49.680 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.680 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3655: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.682 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.684 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 80: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@9fd4af
2020-01-01 14:49:49.684 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 07 BD 
2020-01-01 14:49:49.684 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 80: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.685 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 80: Node advancer - advancing to PING
2020-01-01 14:49:49.685 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 07 BD 
2020-01-01 14:49:49.686 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 80: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.687 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 80: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.688 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 80: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.689 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 80: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.689 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.687 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.690 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 80: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.690 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.691 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 80: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@19d5318
2020-01-01 14:49:49.691 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3656: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.692 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.693 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 80: Adding to device queue
2020-01-01 14:49:49.693 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.694 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3656: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.694 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 80: Added 3706 to queue - size 30
2020-01-01 14:49:49.695 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.695 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.695 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.696 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.697 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3656: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.698 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.699 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3656: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.699 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.700 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: ProtocolInfo
2020-01-01 14:49:49.701 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Listening = true
2020-01-01 14:49:49.702 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Routing   = true
2020-01-01 14:49:49.703 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Beaming   = true
2020-01-01 14:49:49.704 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Version   = 4
2020-01-01 14:49:49.704 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: FLIRS     = false
2020-01-01 14:49:49.705 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Security  = false
2020-01-01 14:49:49.705 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Max Baud  = 40000
2020-01-01 14:49:49.707 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.707 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.708 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 7: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.709 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.710 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.710 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.711 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 7: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.712 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.713 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 7: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.714 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 7: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.715 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3656: Transaction COMPLETED
2020-01-01 14:49:49.715 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 25ms
2020-01-01 14:49:49.716 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3656: Transaction completed
2020-01-01 14:49:49.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3656 DONE
2020-01-01 14:49:49.718 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.719 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3656: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.719 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.720 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 7: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@610330
2020-01-01 14:49:49.720 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 25 9F 
2020-01-01 14:49:49.721 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 7: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.721 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 7: Node advancer - advancing to PING
2020-01-01 14:49:49.721 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 25 9F 
2020-01-01 14:49:49.722 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 7: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.722 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3657: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.725 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 7: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.726 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 7: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.727 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 7: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.727 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 7: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.728 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.728 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 7: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1639c18
2020-01-01 14:49:49.729 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.729 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 7: Adding to device queue
2020-01-01 14:49:49.730 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.730 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 7: Added 3707 to queue - size 31
2020-01-01 14:49:49.731 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3657: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.731 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.731 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.731 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.732 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.732 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.733 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.733 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.734 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3657: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.734 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.735 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3657: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.735 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.736 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: ProtocolInfo
2020-01-01 14:49:49.737 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Listening = true
2020-01-01 14:49:49.737 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Routing   = true
2020-01-01 14:49:49.738 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Beaming   = true
2020-01-01 14:49:49.738 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Version   = 4
2020-01-01 14:49:49.738 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: FLIRS     = false
2020-01-01 14:49:49.739 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Security  = false
2020-01-01 14:49:49.739 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Max Baud  = 40000
2020-01-01 14:49:49.740 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.740 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.741 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 37: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.741 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.742 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.742 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.743 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 37: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.743 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.744 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 37: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.744 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 37: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.745 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3657: Transaction COMPLETED
2020-01-01 14:49:49.745 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 22ms
2020-01-01 14:49:49.746 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3657: Transaction completed
2020-01-01 14:49:49.746 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3657 DONE
2020-01-01 14:49:49.747 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.747 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3657: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.748 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.749 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 14 AE 
2020-01-01 14:49:49.749 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 37: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@16c77cc
2020-01-01 14:49:49.749 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 37: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.749 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 14 AE 
2020-01-01 14:49:49.750 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 37: Node advancer - advancing to PING
2020-01-01 14:49:49.751 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.751 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 37: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.751 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3658: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.753 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 37: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.752 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.754 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 37: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.755 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 37: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.756 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 37: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.754 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.757 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.757 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 37: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@6ee9c5
2020-01-01 14:49:49.758 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3658: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.758 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 37: Adding to device queue
2020-01-01 14:49:49.758 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:49.758 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.759 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 37: Added 3708 to queue - size 32
2020-01-01 14:49:49.759 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.759 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.759 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.760 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.761 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.761 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3658: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.762 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.762 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3658: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.763 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.764 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: ProtocolInfo
2020-01-01 14:49:49.764 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Listening = true
2020-01-01 14:49:49.765 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Routing   = true
2020-01-01 14:49:49.765 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Beaming   = true
2020-01-01 14:49:49.765 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Version   = 4
2020-01-01 14:49:49.766 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: FLIRS     = false
2020-01-01 14:49:49.766 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Security  = false
2020-01-01 14:49:49.767 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Max Baud  = 40000
2020-01-01 14:49:49.767 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.768 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:49.768 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 20: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:49.769 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.769 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.770 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.770 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 20: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.771 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.771 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 20: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.772 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 20: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.773 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3658: Transaction COMPLETED
2020-01-01 14:49:49.773 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 22ms
2020-01-01 14:49:49.774 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3658: Transaction completed
2020-01-01 14:49:49.774 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3658 DONE
2020-01-01 14:49:49.775 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.775 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3658: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.775 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.776 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 20: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@b28264
2020-01-01 14:49:49.776 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 43 F9 
2020-01-01 14:49:49.777 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 20: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.777 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 43 F9 
2020-01-01 14:49:49.778 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 20: Node advancer - advancing to PING
2020-01-01 14:49:49.778 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.779 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3659: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.779 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 20: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.779 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.780 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.781 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.782 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.782 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3659: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.782 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 20: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.783 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 20: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.784 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 20: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.785 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.785 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 20: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.786 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 20: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1b01156
2020-01-01 14:49:49.787 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.787 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 20: Adding to device queue
2020-01-01 14:49:49.788 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 20: Added 3709 to queue - size 33
2020-01-01 14:49:49.789 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.789 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.790 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3659: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.790 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.791 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3659: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.792 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.793 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: ProtocolInfo
2020-01-01 14:49:49.794 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Listening = true
2020-01-01 14:49:49.795 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Routing   = true
2020-01-01 14:49:49.795 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Beaming   = true
2020-01-01 14:49:49.796 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Version   = 4
2020-01-01 14:49:49.797 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: FLIRS     = false
2020-01-01 14:49:49.798 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Security  = false
2020-01-01 14:49:49.798 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Max Baud  = 40000
2020-01-01 14:49:49.799 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.800 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.801 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 67: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.801 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.803 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.803 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.804 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 67: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.805 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.806 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 67: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.807 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 67: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.808 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3659: Transaction COMPLETED
2020-01-01 14:49:49.808 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 29ms
2020-01-01 14:49:49.809 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3659: Transaction completed
2020-01-01 14:49:49.810 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3659 DONE
2020-01-01 14:49:49.811 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.811 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3659: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.812 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.812 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 67: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@d7479a
2020-01-01 14:49:49.813 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 67: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.813 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 32 88 
2020-01-01 14:49:49.813 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 67: Node advancer - advancing to PING
2020-01-01 14:49:49.814 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 67: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.814 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 32 88 
2020-01-01 14:49:49.815 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 67: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.816 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.816 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 67: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.817 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.817 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 67: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.817 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3660: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.818 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 67: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.818 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.819 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.819 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 67: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@1d5db64
2020-01-01 14:49:49.819 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3660: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.820 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.819 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 67: Adding to device queue
2020-01-01 14:49:49.820 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.820 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 67: Added 3710 to queue - size 34
2020-01-01 14:49:49.821 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.821 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.821 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.821 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.823 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.824 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3660: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.825 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.826 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3660: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.827 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.828 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: ProtocolInfo
2020-01-01 14:49:49.829 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Listening = true
2020-01-01 14:49:49.830 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Routing   = true
2020-01-01 14:49:49.830 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Beaming   = true
2020-01-01 14:49:49.831 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Version   = 4
2020-01-01 14:49:49.832 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: FLIRS     = false
2020-01-01 14:49:49.833 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Security  = false
2020-01-01 14:49:49.833 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Max Baud  = 40000
2020-01-01 14:49:49.834 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.835 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.836 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 50: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.836 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.838 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.838 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.839 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 50: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.840 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.841 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 50: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.842 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 50: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.843 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3660: Transaction COMPLETED
2020-01-01 14:49:49.843 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 26ms
2020-01-01 14:49:49.844 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3660: Transaction completed
2020-01-01 14:49:49.845 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3660 DONE
2020-01-01 14:49:49.846 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.846 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3660: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.847 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.847 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 50: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@6a69e7
2020-01-01 14:49:49.848 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 50: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.848 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 1A A0 
2020-01-01 14:49:49.848 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 50: Node advancer - advancing to PING
2020-01-01 14:49:49.849 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 1A A0 
2020-01-01 14:49:49.849 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 50: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.849 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.850 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3661: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.850 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 50: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.851 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 50: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.851 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.852 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 50: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.853 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 50: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.853 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.853 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 50: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@168e78e
2020-01-01 14:49:49.854 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 50: Adding to device queue
2020-01-01 14:49:49.855 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 50: Added 3711 to queue - size 35
2020-01-01 14:49:49.856 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.856 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.856 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.857 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3661: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.858 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.858 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.859 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.859 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.860 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.860 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3661: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.861 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.861 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3661: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.862 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.863 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: ProtocolInfo
2020-01-01 14:49:49.863 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Listening = true
2020-01-01 14:49:49.864 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Routing   = true
2020-01-01 14:49:49.864 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Beaming   = true
2020-01-01 14:49:49.865 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Version   = 4
2020-01-01 14:49:49.865 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: FLIRS     = false
2020-01-01 14:49:49.865 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Security  = false
2020-01-01 14:49:49.866 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Max Baud  = 40000
2020-01-01 14:49:49.866 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.867 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.867 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 26: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.868 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.868 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.869 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.869 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 26: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.870 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.871 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 26: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.871 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 26: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.872 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3661: Transaction COMPLETED
2020-01-01 14:49:49.872 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 22ms
2020-01-01 14:49:49.873 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3661: Transaction completed
2020-01-01 14:49:49.873 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3661 DONE
2020-01-01 14:49:49.874 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.874 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3661: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.875 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.875 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 40 FA 
2020-01-01 14:49:49.875 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 26: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@108d1f8
2020-01-01 14:49:49.876 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 26: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.876 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 40 FA 
2020-01-01 14:49:49.877 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.877 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 26: Node advancer - advancing to PING
2020-01-01 14:49:49.878 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3662: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.878 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 26: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.879 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 26: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.880 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 26: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.881 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 26: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.881 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 26: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.882 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 26: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@a4d7d
2020-01-01 14:49:49.882 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 26: Adding to device queue
2020-01-01 14:49:49.883 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 26: Added 3712 to queue - size 36
2020-01-01 14:49:49.884 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.885 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.887 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.888 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.889 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3662: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.889 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:49.890 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.890 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.891 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.891 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.893 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.894 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3662: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.894 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.895 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3662: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.895 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:49.896 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: ProtocolInfo
2020-01-01 14:49:49.897 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Listening = true
2020-01-01 14:49:49.897 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Routing   = true
2020-01-01 14:49:49.898 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Beaming   = true
2020-01-01 14:49:49.898 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Version   = 4
2020-01-01 14:49:49.898 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: FLIRS     = false
2020-01-01 14:49:49.899 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Security  = false
2020-01-01 14:49:49.899 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Max Baud  = 40000
2020-01-01 14:49:49.900 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.900 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:49.901 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 64: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:49.901 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.902 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.902 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.903 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 64: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.904 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.904 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 64: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.905 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 64: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.905 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3662: Transaction COMPLETED
2020-01-01 14:49:49.906 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 28ms
2020-01-01 14:49:49.906 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3662: Transaction completed
2020-01-01 14:49:49.907 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3662 DONE
2020-01-01 14:49:49.908 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.908 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3662: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.908 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.909 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 64: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@13c1b26
2020-01-01 14:49:49.909 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 23 99 
2020-01-01 14:49:49.910 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 64: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.910 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 23 99 
2020-01-01 14:49:49.911 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 64: Node advancer - advancing to PING
2020-01-01 14:49:49.911 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.912 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 64: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.912 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3664: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.913 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.913 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.914 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.915 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.915 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3664: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.917 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.918 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.919 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 64: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.919 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 64: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.920 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 64: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.921 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 64: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.921 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 64: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@3e9d25
2020-01-01 14:49:49.918 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.920 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.923 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 64: Adding to device queue
2020-01-01 14:49:49.924 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 64: Added 3713 to queue - size 37
2020-01-01 14:49:49.925 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.926 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.927 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3664: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.928 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.929 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3664: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.931 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.932 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: ProtocolInfo
2020-01-01 14:49:49.933 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Listening = true
2020-01-01 14:49:49.934 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Routing   = true
2020-01-01 14:49:49.935 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Beaming   = true
2020-01-01 14:49:49.936 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Version   = 4
2020-01-01 14:49:49.937 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: FLIRS     = false
2020-01-01 14:49:49.938 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Security  = false
2020-01-01 14:49:49.939 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Max Baud  = 40000
2020-01-01 14:49:49.940 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.941 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.942 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 35: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.943 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.945 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.946 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.947 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 35: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.948 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.949 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 35: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.950 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 35: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.951 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3664: Transaction COMPLETED
2020-01-01 14:49:49.952 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 40ms
2020-01-01 14:49:49.953 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3664: Transaction completed
2020-01-01 14:49:49.954 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3664 DONE
2020-01-01 14:49:49.956 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.956 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3664: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.957 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 35: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@47988f
2020-01-01 14:49:49.957 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.958 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 35: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.958 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 35: Node advancer - advancing to PING
2020-01-01 14:49:49.958 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 0A B0 
2020-01-01 14:49:49.959 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 35: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.959 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 0A B0 
2020-01-01 14:49:49.961 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 35: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.961 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 35: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.962 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.962 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 35: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.963 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 35: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.963 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 35: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@78089f
2020-01-01 14:49:49.960 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.965 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3665: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.963 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.966 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 35: Adding to device queue
2020-01-01 14:49:49.967 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 35: Added 3714 to queue - size 38
2020-01-01 14:49:49.967 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.967 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3665: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.967 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.968 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:49.968 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.969 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.969 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.969 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.971 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.971 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3665: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.972 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:49.972 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3665: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.973 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:49.974 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: ProtocolInfo
2020-01-01 14:49:49.974 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Listening = true
2020-01-01 14:49:49.975 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Routing   = true
2020-01-01 14:49:49.975 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Beaming   = true
2020-01-01 14:49:49.976 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Version   = 4
2020-01-01 14:49:49.976 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: FLIRS     = false
2020-01-01 14:49:49.977 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Security  = false
2020-01-01 14:49:49.977 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Max Baud  = 40000
2020-01-01 14:49:49.978 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:49.978 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:49.979 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 10: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:49.979 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:49.980 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:49.980 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:49.981 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 10: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:49.981 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:49.982 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 10: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:49.983 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 10: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:49.983 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3665: Transaction COMPLETED
2020-01-01 14:49:49.984 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 19ms
2020-01-01 14:49:49.984 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3665: Transaction completed
2020-01-01 14:49:49.984 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3665 DONE
2020-01-01 14:49:49.985 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.985 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3665: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:49.986 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:49.986 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 10: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@a8a08
2020-01-01 14:49:49.987 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 10: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:49.987 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 1C A6 
2020-01-01 14:49:49.987 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 10: Node advancer - advancing to PING
2020-01-01 14:49:49.988 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 1C A6 
2020-01-01 14:49:49.988 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 10: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:49.988 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:49.989 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 10: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:49.989 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3666: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.990 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 10: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:49.990 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:49.990 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 10: SECURITY doesn't encrypt PING
2020-01-01 14:49:49.991 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 10: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:49.991 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.991 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 10: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@10819ed
2020-01-01 14:49:49.991 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:49.992 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3666: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:49.992 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 10: Adding to device queue
2020-01-01 14:49:49.995 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 10: Added 3715 to queue - size 39
2020-01-01 14:49:49.993 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:49.996 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.996 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:49.998 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:49.998 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.001 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.002 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.002 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3666: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.003 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.003 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3666: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.004 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.005 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: ProtocolInfo
2020-01-01 14:49:50.005 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Listening = true
2020-01-01 14:49:50.006 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Routing   = true
2020-01-01 14:49:50.006 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Beaming   = true
2020-01-01 14:49:50.007 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Version   = 4
2020-01-01 14:49:50.007 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: FLIRS     = false
2020-01-01 14:49:50.008 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Security  = false
2020-01-01 14:49:50.008 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Max Baud  = 40000
2020-01-01 14:49:50.009 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.009 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.010 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 28: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.010 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.011 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.011 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.012 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 28: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.012 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.013 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 28: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.014 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 28: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.014 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3666: Transaction COMPLETED
2020-01-01 14:49:50.015 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 26ms
2020-01-01 14:49:50.015 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3666: Transaction completed
2020-01-01 14:49:50.016 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3666 DONE
2020-01-01 14:49:50.016 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.016 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3666: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.017 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.017 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 28: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1356f89
2020-01-01 14:49:50.018 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 28: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.018 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 42 F8 
2020-01-01 14:49:50.019 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 28: Node advancer - advancing to PING
2020-01-01 14:49:50.019 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 42 F8 
2020-01-01 14:49:50.019 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 28: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.021 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.022 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3667: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.024 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 28: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.025 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 28: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.026 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.026 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 28: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.027 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 28: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.028 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.028 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 28: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@37fa0b
2020-01-01 14:49:50.030 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.031 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.031 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3667: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.031 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.032 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.033 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 28: Adding to device queue
2020-01-01 14:49:50.033 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.034 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 28: Added 3716 to queue - size 40
2020-01-01 14:49:50.035 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.036 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.037 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.038 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3667: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.038 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.039 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3667: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.039 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.040 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: ProtocolInfo
2020-01-01 14:49:50.041 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Listening = true
2020-01-01 14:49:50.041 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Routing   = true
2020-01-01 14:49:50.041 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Beaming   = true
2020-01-01 14:49:50.042 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Version   = 4
2020-01-01 14:49:50.042 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: FLIRS     = false
2020-01-01 14:49:50.043 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Security  = false
2020-01-01 14:49:50.043 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Max Baud  = 40000
2020-01-01 14:49:50.044 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.044 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.045 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 66: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.045 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.046 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.046 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.047 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 66: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.047 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.048 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 66: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.049 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 66: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.049 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3667: Transaction COMPLETED
2020-01-01 14:49:50.050 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 28ms
2020-01-01 14:49:50.050 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3667: Transaction completed
2020-01-01 14:49:50.051 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3667 DONE
2020-01-01 14:49:50.051 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.051 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3667: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.052 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 66: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@19d523d
2020-01-01 14:49:50.052 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.053 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 66: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.053 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 1B A1 
2020-01-01 14:49:50.054 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 66: Node advancer - advancing to PING
2020-01-01 14:49:50.054 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 1B A1 
2020-01-01 14:49:50.054 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 66: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.055 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.055 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3668: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.055 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 66: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.056 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.058 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 66: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.059 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 66: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.059 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.061 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.062 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.062 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3668: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.062 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 66: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.063 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 66: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@9fdf6a
2020-01-01 14:49:50.064 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.064 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 66: Adding to device queue
2020-01-01 14:49:50.064 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.064 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.064 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 66: Added 3717 to queue - size 41
2020-01-01 14:49:50.065 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.066 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.066 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.066 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3668: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.067 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.068 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3668: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.068 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.069 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: ProtocolInfo
2020-01-01 14:49:50.069 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Listening = true
2020-01-01 14:49:50.070 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Routing   = true
2020-01-01 14:49:50.070 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Beaming   = true
2020-01-01 14:49:50.071 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Version   = 4
2020-01-01 14:49:50.071 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: FLIRS     = false
2020-01-01 14:49:50.072 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Security  = false
2020-01-01 14:49:50.072 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Max Baud  = 40000
2020-01-01 14:49:50.072 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.073 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.073 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 27: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.074 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.074 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.075 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.075 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 27: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.076 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.077 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 27: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.077 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 27: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.078 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3668: Transaction COMPLETED
2020-01-01 14:49:50.078 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 23ms
2020-01-01 14:49:50.079 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3668: Transaction completed
2020-01-01 14:49:50.079 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3668 DONE
2020-01-01 14:49:50.080 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.080 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3668: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.081 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.081 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 27: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@8305a
2020-01-01 14:49:50.081 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 27: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.082 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 3F 85 
2020-01-01 14:49:50.082 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 27: Node advancer - advancing to PING
2020-01-01 14:49:50.082 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 3F 85 
2020-01-01 14:49:50.082 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 27: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.083 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.084 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 27: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.084 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3669: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.084 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 27: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.085 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 27: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.085 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.086 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 27: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.087 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 27: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@10ab37f
2020-01-01 14:49:50.088 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 27: Adding to device queue
2020-01-01 14:49:50.086 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.089 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 27: Added 3718 to queue - size 42
2020-01-01 14:49:50.090 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.090 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.091 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3669: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.091 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:50.091 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.092 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.092 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.093 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:50.094 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:50.094 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3669: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.095 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.095 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3669: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.096 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:50.097 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: ProtocolInfo
2020-01-01 14:49:50.098 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Listening = true
2020-01-01 14:49:50.098 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Routing   = true
2020-01-01 14:49:50.098 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Beaming   = true
2020-01-01 14:49:50.099 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Version   = 4
2020-01-01 14:49:50.099 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: FLIRS     = false
2020-01-01 14:49:50.100 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Security  = false
2020-01-01 14:49:50.100 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Max Baud  = 40000
2020-01-01 14:49:50.101 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.101 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:50.102 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 63: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:50.102 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.103 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.103 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.104 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 63: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.104 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.105 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 63: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.106 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 63: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.106 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3669: Transaction COMPLETED
2020-01-01 14:49:50.107 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 24ms
2020-01-01 14:49:50.107 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3669: Transaction completed
2020-01-01 14:49:50.108 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3669 DONE
2020-01-01 14:49:50.109 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.109 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3669: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.109 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.110 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 26 9C 
2020-01-01 14:49:50.110 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 63: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@93fdd4
2020-01-01 14:49:50.111 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 63: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.111 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 26 9C 
2020-01-01 14:49:50.112 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 63: Node advancer - advancing to PING
2020-01-01 14:49:50.112 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.112 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 63: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.113 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3670: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.114 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 63: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.114 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.114 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 63: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.115 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.115 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 63: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.116 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.116 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 63: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.117 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.117 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 63: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@19164e2
2020-01-01 14:49:50.118 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3670: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.118 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 63: Adding to device queue
2020-01-01 14:49:50.118 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 63: Added 3719 to queue - size 43
2020-01-01 14:49:50.119 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.119 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.120 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.121 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.122 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.123 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.125 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3670: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.126 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.127 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3670: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.128 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.129 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: ProtocolInfo
2020-01-01 14:49:50.129 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Listening = true
2020-01-01 14:49:50.130 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Routing   = true
2020-01-01 14:49:50.131 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Beaming   = true
2020-01-01 14:49:50.132 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Version   = 4
2020-01-01 14:49:50.132 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: FLIRS     = false
2020-01-01 14:49:50.133 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Security  = false
2020-01-01 14:49:50.134 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Max Baud  = 40000
2020-01-01 14:49:50.135 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.135 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.136 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 38: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.137 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.138 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.139 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.140 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 38: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.141 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.142 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 38: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.142 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 38: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.143 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3670: Transaction COMPLETED
2020-01-01 14:49:50.144 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 31ms
2020-01-01 14:49:50.145 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3670: Transaction completed
2020-01-01 14:49:50.146 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3670 DONE
2020-01-01 14:49:50.147 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.147 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3670: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.148 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 38: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1298e15
2020-01-01 14:49:50.148 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.149 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 38: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.149 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 45 FF 
2020-01-01 14:49:50.149 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 38: Node advancer - advancing to PING
2020-01-01 14:49:50.150 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 38: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.150 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 45 FF 
2020-01-01 14:49:50.151 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.151 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 38: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.152 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 38: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.152 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3671: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.153 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 38: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.153 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 38: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.154 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 38: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@2b1414
2020-01-01 14:49:50.155 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.155 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 38: Adding to device queue
2020-01-01 14:49:50.156 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.156 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 38: Added 3720 to queue - size 44
2020-01-01 14:49:50.158 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.158 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.158 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.158 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3671: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.159 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.159 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.160 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.161 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3671: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.161 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.162 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3671: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.162 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.163 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: ProtocolInfo
2020-01-01 14:49:50.164 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Listening = true
2020-01-01 14:49:50.164 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Routing   = true
2020-01-01 14:49:50.165 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Beaming   = true
2020-01-01 14:49:50.165 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Version   = 4
2020-01-01 14:49:50.166 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: FLIRS     = false
2020-01-01 14:49:50.166 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Security  = false
2020-01-01 14:49:50.167 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Max Baud  = 40000
2020-01-01 14:49:50.167 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.168 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.168 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 69: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.169 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.169 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.170 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.170 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 69: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.171 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.171 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 69: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.172 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 69: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.173 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3671: Transaction COMPLETED
2020-01-01 14:49:50.173 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 21ms
2020-01-01 14:49:50.174 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3671: Transaction completed
2020-01-01 14:49:50.174 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3671 DONE
2020-01-01 14:49:50.175 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.175 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3671: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.176 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.176 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 69: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1a328c6
2020-01-01 14:49:50.177 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 69: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.177 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 46 FC 
2020-01-01 14:49:50.177 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 69: Node advancer - advancing to PING
2020-01-01 14:49:50.177 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 46 FC 
2020-01-01 14:49:50.178 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 69: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.178 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.179 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 69: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.180 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 69: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.181 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 69: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.182 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 69: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.182 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 69: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@a1a556
2020-01-01 14:49:50.183 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.184 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.186 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.179 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3672: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.187 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 1<>127 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.188 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 69: Adding to device queue
2020-01-01 14:49:50.189 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 69: Added 3721 to queue - size 45
2020-01-01 14:49:50.189 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.190 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (1): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.191 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3672: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.192 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.192 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.193 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3672: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.194 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.195 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3672: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.195 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.197 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: ProtocolInfo
2020-01-01 14:49:50.197 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Listening = true
2020-01-01 14:49:50.198 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Routing   = true
2020-01-01 14:49:50.199 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Beaming   = true
2020-01-01 14:49:50.200 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Version   = 4
2020-01-01 14:49:50.200 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: FLIRS     = false
2020-01-01 14:49:50.201 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Security  = false
2020-01-01 14:49:50.202 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Max Baud  = 40000
2020-01-01 14:49:50.203 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.203 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.204 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 70: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.205 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.206 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.207 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.208 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 70: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.208 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.209 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 70: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.210 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 70: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.211 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3672: Transaction COMPLETED
2020-01-01 14:49:50.212 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 33ms
2020-01-01 14:49:50.213 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3672: Transaction completed
2020-01-01 14:49:50.213 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3672 DONE
2020-01-01 14:49:50.215 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.215 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3672: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.215 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.216 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 70: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@153503d
2020-01-01 14:49:50.217 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 70: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.217 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 3E 84 
2020-01-01 14:49:50.218 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 3E 84 
2020-01-01 14:49:50.218 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 70: Node advancer - advancing to PING
2020-01-01 14:49:50.218 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 70: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.219 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.220 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 70: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.220 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 70: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.220 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3673: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.221 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.221 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 70: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.222 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.223 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.224 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3673: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.224 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 10 01 ED 
2020-01-01 14:49:50.225 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.225 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 70: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.225 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.225 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 70: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@51c9b3
2020-01-01 14:49:50.226 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:50.226 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 70: Adding to device queue
2020-01-01 14:49:50.227 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 70: Added 3722 to queue - size 46
2020-01-01 14:49:50.228 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.228 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.230 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:50.230 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3673: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.231 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.232 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3673: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.233 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 10 01 
2020-01-01 14:49:50.234 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: ProtocolInfo
2020-01-01 14:49:50.235 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Listening = true
2020-01-01 14:49:50.235 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Routing   = true
2020-01-01 14:49:50.236 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Beaming   = true
2020-01-01 14:49:50.237 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Version   = 4
2020-01-01 14:49:50.238 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: FLIRS     = false
2020-01-01 14:49:50.238 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Security  = false
2020-01-01 14:49:50.239 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Max Baud  = 40000
2020-01-01 14:49:50.240 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.241 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Generic  = GENERIC_TYPE_SWITCH_BINARY
2020-01-01 14:49:50.241 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 62: Specific = SPECIFIC_TYPE_POWER_SWITCH_BINARY
2020-01-01 14:49:50.242 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.243 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.244 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.245 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 62: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.246 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.246 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 62: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.248 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 62: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.248 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3673: Transaction COMPLETED
2020-01-01 14:49:50.249 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 29ms
2020-01-01 14:49:50.250 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3673: Transaction completed
2020-01-01 14:49:50.251 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3673 DONE
2020-01-01 14:49:50.251 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.252 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3673: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.252 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 62: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@16e86da
2020-01-01 14:49:50.253 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.253 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 62: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.254 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 62: Node advancer - advancing to PING
2020-01-01 14:49:50.254 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 28 92 
2020-01-01 14:49:50.254 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 62: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.255 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 28 92 
2020-01-01 14:49:50.255 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 62: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.257 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.258 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3674: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.259 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.260 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.262 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.262 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 62: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.262 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.263 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3674: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.263 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 62: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.263 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.263 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 62: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.264 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.264 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.264 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 62: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@6c1253
2020-01-01 14:49:50.264 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.265 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 62: Adding to device queue
2020-01-01 14:49:50.265 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.266 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3674: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.266 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 62: Added 3723 to queue - size 47
2020-01-01 14:49:50.267 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.267 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.268 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3674: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.269 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.269 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: ProtocolInfo
2020-01-01 14:49:50.270 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Listening = true
2020-01-01 14:49:50.270 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Routing   = true
2020-01-01 14:49:50.271 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Beaming   = true
2020-01-01 14:49:50.271 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Version   = 4
2020-01-01 14:49:50.272 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: FLIRS     = false
2020-01-01 14:49:50.272 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Security  = false
2020-01-01 14:49:50.272 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Max Baud  = 40000
2020-01-01 14:49:50.273 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.273 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.274 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 40: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.274 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.275 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.275 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.276 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.277 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.277 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.278 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.278 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3674: Transaction COMPLETED
2020-01-01 14:49:50.279 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 21ms
2020-01-01 14:49:50.279 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3674: Transaction completed
2020-01-01 14:49:50.280 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3674 DONE
2020-01-01 14:49:50.281 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.281 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3674: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.281 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.281 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 40: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1dbdc83
2020-01-01 14:49:50.282 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 40: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.282 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 27 9D 
2020-01-01 14:49:50.283 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 40: Node advancer - advancing to PING
2020-01-01 14:49:50.283 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 27 9D 
2020-01-01 14:49:50.283 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.284 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.284 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3675: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.285 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 40: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.286 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 40: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.287 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.287 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.288 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.288 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.289 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@d9491c
2020-01-01 14:49:50.290 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Adding to device queue
2020-01-01 14:49:50.290 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Added 3724 to queue - size 48
2020-01-01 14:49:50.291 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.291 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.291 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.291 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3675: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.292 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.292 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.293 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.293 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.295 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.295 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3675: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.296 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.297 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3675: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.297 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.298 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: ProtocolInfo
2020-01-01 14:49:50.298 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Listening = true
2020-01-01 14:49:50.299 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Routing   = true
2020-01-01 14:49:50.299 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Beaming   = true
2020-01-01 14:49:50.300 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Version   = 4
2020-01-01 14:49:50.300 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: FLIRS     = false
2020-01-01 14:49:50.301 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Security  = false
2020-01-01 14:49:50.301 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Max Baud  = 40000
2020-01-01 14:49:50.307 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.308 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.309 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 39: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.310 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.311 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.311 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.312 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 39: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.312 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.313 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 39: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.314 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 39: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.314 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3675: Transaction COMPLETED
2020-01-01 14:49:50.315 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 31ms
2020-01-01 14:49:50.315 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3675: Transaction completed
2020-01-01 14:49:50.316 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3675 DONE
2020-01-01 14:49:50.316 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.316 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3675: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.317 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.318 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 09 B3 
2020-01-01 14:49:50.318 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 39: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@14b5bb6
2020-01-01 14:49:50.319 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 39: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.319 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 09 B3 
2020-01-01 14:49:50.319 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 39: Node advancer - advancing to PING
2020-01-01 14:49:50.320 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.320 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3676: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.320 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 39: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.321 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.321 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 39: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.322 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.322 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 39: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.323 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.323 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3676: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.323 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.323 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 39: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.325 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 39: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.327 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 39: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@49c23b
2020-01-01 14:49:50.326 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.328 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.328 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.328 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 39: Adding to device queue
2020-01-01 14:49:50.329 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 39: Added 3725 to queue - size 49
2020-01-01 14:49:50.329 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.330 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.331 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.331 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3676: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.332 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.332 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3676: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.333 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.334 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: ProtocolInfo
2020-01-01 14:49:50.334 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Listening = true
2020-01-01 14:49:50.334 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Routing   = true
2020-01-01 14:49:50.335 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Beaming   = true
2020-01-01 14:49:50.335 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Version   = 4
2020-01-01 14:49:50.336 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: FLIRS     = false
2020-01-01 14:49:50.336 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Security  = false
2020-01-01 14:49:50.337 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Max Baud  = 40000
2020-01-01 14:49:50.337 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.338 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.338 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 9: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.338 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.339 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.340 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.340 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 9: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.341 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.341 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 9: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.342 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 9: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.342 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3676: Transaction COMPLETED
2020-01-01 14:49:50.343 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 23ms
2020-01-01 14:49:50.343 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3676: Transaction completed
2020-01-01 14:49:50.343 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3676 DONE
2020-01-01 14:49:50.344 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.344 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3676: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.345 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.346 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1b7fe42
2020-01-01 14:49:50.346 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 41 44 FE 
2020-01-01 14:49:50.346 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.346 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 41 44 FE 
2020-01-01 14:49:50.347 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.347 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Node advancer - advancing to PING
2020-01-01 14:49:50.348 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.348 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3677: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.349 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.350 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 01 41 D3 9C 01 04 11 01 EC 
2020-01-01 14:49:50.352 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.352 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.352 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3677: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.353 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.353 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 9: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.354 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.357 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.357 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.357 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.357 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 9: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.358 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 9: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.358 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.359 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3677: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.359 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 9: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@b56390
2020-01-01 14:49:50.359 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.360 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3677: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:50.360 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 9: Adding to device queue
2020-01-01 14:49:50.361 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=IdentifyNode[65], type=Response[1], dest=255, callback=0, payload=D3 9C 01 04 11 01 
2020-01-01 14:49:50.361 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: ProtocolInfo
2020-01-01 14:49:50.361 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 9: Added 3726 to queue - size 50
2020-01-01 14:49:50.362 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Listening = true
2020-01-01 14:49:50.362 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.362 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Routing   = true
2020-01-01 14:49:50.363 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Beaming   = true
2020-01-01 14:49:50.363 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Version   = 4
2020-01-01 14:49:50.364 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: FLIRS     = false
2020-01-01 14:49:50.364 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Security  = false
2020-01-01 14:49:50.365 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Max Baud  = 40000
2020-01-01 14:49:50.365 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Basic    = BASIC_TYPE_ROUTING_SLAVE
2020-01-01 14:49:50.365 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Generic  = GENERIC_TYPE_SWITCH_MULTILEVEL
2020-01-01 14:49:50.366 [DEBUG] [rialmessage.IdentifyNodeMessageClass] - NODE 68: Specific = SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
2020-01-01 14:49:50.366 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Creating new instance of command class COMMAND_CLASS_NO_OPERATION
2020-01-01 14:49:50.367 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_NO_OPERATION, endpoint 0 created
2020-01-01 14:49:50.368 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Version = 1, version set. Enabling extra functionality.
2020-01-01 14:49:50.368 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 68: Adding command class COMMAND_CLASS_NO_OPERATION to the list of supported command classes.
2020-01-01 14:49:50.369 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Creating new instance of command class COMMAND_CLASS_BASIC
2020-01-01 14:49:50.369 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 68: Command class COMMAND_CLASS_BASIC, endpoint 0 created
2020-01-01 14:49:50.370 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 68: Adding command class COMMAND_CLASS_BASIC to the list of supported command classes.
2020-01-01 14:49:50.370 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3677: Transaction COMPLETED
2020-01-01 14:49:50.371 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 23ms
2020-01-01 14:49:50.371 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 3677: Transaction completed
2020-01-01 14:49:50.371 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:3677 DONE
2020-01-01 14:49:50.372 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.372 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3677: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:50.373 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:50.373 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 68: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@5f0d2f
2020-01-01 14:49:50.374 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 68: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:50.374 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 08 00 13 05 01 00 25 8E 4B 
2020-01-01 14:49:50.374 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 68: Node advancer - advancing to PING
2020-01-01 14:49:50.375 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 5: Sending REQUEST Message = 01 08 00 13 05 01 00 25 8E 4B 
2020-01-01 14:49:50.375 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 68: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:50.376 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:50.376 [DEBUG] [ndclass.ZWaveNoOperationCommandClass] - NODE 68: Creating new message for command NO_OPERATION_PING
2020-01-01 14:49:50.376 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3649: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 142
2020-01-01 14:49:50.377 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 68: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:50.378 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 68: SECURITY doesn't encrypt PING
2020-01-01 14:49:50.379 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 68: Command Class COMMAND_CLASS_NO_OPERATION is NOT required to be secured
2020-01-01 14:49:50.380 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 68: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@15d9ec0
2020-01-01 14:49:50.381 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 68: Adding to device queue
2020-01-01 14:49:50.381 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 68: Added 3727 to queue - size 50
2020-01-01 14:49:50.382 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.382 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:50.383 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.385 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:50.385 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8 
2020-01-01 14:49:50.386 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3649: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 142
2020-01-01 14:49:50.387 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:50.387 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:50.388 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.388 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:50.389 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:50.390 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3649: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 142
2020-01-01 14:49:50.391 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:50.391 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3649: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 142
2020-01-01 14:49:50.393 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:50.393 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 5: sentData successfully placed on stack.
2020-01-01 14:49:50.394 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3649: Advanced to WAIT_REQUEST
2020-01-01 14:49:50.395 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: TID 3649: Transaction not completed
2020-01-01 14:49:50.396 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:50.396 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:51.757 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 8E 00 00 89 EC 
2020-01-01 14:49:51.761 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Request[0], dest=0, callback=142, payload=8E 00 00 89 
2020-01-01 14:49:51.762 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Request[0], dest=0, callback=142, payload=8E 00 00 89 
2020-01-01 14:49:51.763 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3649: [WAIT_REQUEST] priority=Poll, requiresResponse=true, callback: 142
2020-01-01 14:49:51.765 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:51.766 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3649: [WAIT_REQUEST] priority=Poll, requiresResponse=true, callback: 142
2020-01-01 14:49:51.768 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 3649: (Callback 142)
2020-01-01 14:49:51.769 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Callback match!
2020-01-01 14:49:51.771 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 3649: callback 142
2020-01-01 14:49:51.772 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Request[0], dest=0, callback=142, payload=8E 00 00 89 
2020-01-01 14:49:51.774 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 5: SendData Request. CallBack ID = 142, Status = Transmission complete and ACK received(0)
2020-01-01 14:49:51.775 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3649: Transaction COMPLETED
2020-01-01 14:49:51.778 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Response processed after 1402ms
2020-01-01 14:49:51.779 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: TID 3649: Transaction completed
2020-01-01 14:49:51.781 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: notifyTransactionResponse TID:3649 DONE
2020-01-01 14:49:51.782 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2020-01-01 14:49:51.782 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3649: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:51.783 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@ef25ec
2020-01-01 14:49:51.785 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:51.786 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node advancer - advancing to REQUEST_NIF
2020-01-01 14:49:51.786 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:51.787 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:51.788 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:51.791 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@1ef3125
2020-01-01 14:49:51.797 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 08 00 13 02 01 00 25 8F 4D 
2020-01-01 14:49:51.799 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 2: Sending REQUEST Message = 01 08 00 13 02 01 00 25 8F 4D 
2020-01-01 14:49:51.800 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:51.801 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3663: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 143
2020-01-01 14:49:51.802 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:51.802 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Adding to device queue
2020-01-01 14:49:51.804 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Added 3728 to queue - size 50
2020-01-01 14:49:51.804 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:51.805 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:51.806 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:51.809 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3663: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 143
2020-01-01 14:49:51.809 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:51.811 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:51.812 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.180 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8 
2020-01-01 14:49:52.183 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.184 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.186 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3663: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 143
2020-01-01 14:49:52.188 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:52.188 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3663: [WAIT_RESPONSE] priority=Poll, requiresResponse=true, callback: 143
2020-01-01 14:49:52.190 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.192 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 2: sentData successfully placed on stack.
2020-01-01 14:49:52.194 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3663: Advanced to WAIT_REQUEST
2020-01-01 14:49:52.194 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: TID 3663: Transaction not completed
2020-01-01 14:49:52.196 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:52.197 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.246 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 8F 00 00 2C 48 
2020-01-01 14:49:52.249 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Request[0], dest=0, callback=143, payload=8F 00 00 2C 
2020-01-01 14:49:52.251 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Request[0], dest=0, callback=143, payload=8F 00 00 2C 
2020-01-01 14:49:52.252 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3663: [WAIT_REQUEST] priority=Poll, requiresResponse=true, callback: 143
2020-01-01 14:49:52.253 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:52.254 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3663: [WAIT_REQUEST] priority=Poll, requiresResponse=true, callback: 143
2020-01-01 14:49:52.256 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 3663: (Callback 143)
2020-01-01 14:49:52.257 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Callback match!
2020-01-01 14:49:52.259 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 3663: callback 143
2020-01-01 14:49:52.260 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Request[0], dest=0, callback=143, payload=8F 00 00 2C 
2020-01-01 14:49:52.262 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 2: SendData Request. CallBack ID = 143, Status = Transmission complete and ACK received(0)
2020-01-01 14:49:52.264 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3663: Transaction COMPLETED
2020-01-01 14:49:52.266 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: Response processed after 465ms
2020-01-01 14:49:52.267 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: TID 3663: Transaction completed
2020-01-01 14:49:52.268 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: notifyTransactionResponse TID:3663 DONE
2020-01-01 14:49:52.270 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2020-01-01 14:49:52.270 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3663: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:52.271 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:52.271 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 2: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@9f17f5
2020-01-01 14:49:52.272 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 2: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:52.273 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:52.273 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 2: Node advancer - advancing to REQUEST_NIF
2020-01-01 14:49:52.274 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:52.276 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 60 05 9E 
2020-01-01 14:49:52.280 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 60 05 9E 
2020-01-01 14:49:52.284 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: sendTransaction org.openhab.binding.zwave.internal.protocol.ZWaveSerialPayload@106a652
2020-01-01 14:49:52.286 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:52.287 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3728: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.287 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:52.289 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: Adding to device queue
2020-01-01 14:49:52.290 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:52.291 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: Added 3729 to queue - size 50
2020-01-01 14:49:52.292 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:52.292 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.293 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 60 01 9B 
2020-01-01 14:49:52.294 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3728: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.296 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:52.296 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=RequestNodeInfo[96], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.297 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:52.298 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.301 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=RequestNodeInfo[96], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.302 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3728: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.304 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:52.304 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3728: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.306 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=RequestNodeInfo[96], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.308 [DEBUG] [lmessage.RequestNodeInfoMessageClass] - Request node info successfully placed on stack.
2020-01-01 14:49:52.310 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3728: Advanced to WAIT_DATA
2020-01-01 14:49:52.311 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: TID 3728: Transaction not completed
2020-01-01 14:49:52.312 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:52.313 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.420 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 20 00 49 84 05 1A 04 11 01 5E 20 86 72 26 5A 59 85 73 98 7A 56 70 31 32 8E 60 75 71 27 22 EF 2B AC 
2020-01-01 14:49:52.426 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationUpdate[73], type=Request[0], dest=5, callback=132, payload=84 05 1A 04 11 01 5E 20 86 72 26 5A 59 85 73 98 7A 56 70 31 32 8E 60 75 71 27 22 EF 2B 
2020-01-01 14:49:52.428 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationUpdate[73], type=Request[0], dest=5, callback=132, payload=84 05 1A 04 11 01 5E 20 86 72 26 5A 59 85 73 98 7A 56 70 31 32 8E 60 75 71 27 22 EF 2B 
2020-01-01 14:49:52.429 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3728: [WAIT_DATA] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.430 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:52.431 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3728: [WAIT_DATA] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.432 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 3728: (Callback 0)
2020-01-01 14:49:52.433 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 3728: callback 0
2020-01-01 14:49:52.435 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=ApplicationUpdate[73], type=Request[0], dest=5, callback=132, payload=84 05 1A 04 11 01 5E 20 86 72 26 5A 59 85 73 98 7A 56 70 31 32 8E 60 75 71 27 22 EF 2B 
2020-01-01 14:49:52.437 [DEBUG] [essage.ApplicationUpdateMessageClass] - NODE 5: Application update request. Node information received. Transaction TID 3728: [WAIT_DATA] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.438 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 3728: Transaction COMPLETED
2020-01-01 14:49:52.439 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Response processed after 152ms
2020-01-01 14:49:52.440 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: TID 3728: Transaction completed
2020-01-01 14:49:52.441 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: notifyTransactionResponse TID:3728 DONE
2020-01-01 14:49:52.442 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2020-01-01 14:49:52.442 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3728: Transaction event listener: DONE: DONE -> 
2020-01-01 14:49:52.444 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:52.444 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node Init response (0) org.openhab.binding.zwave.internal.protocol.ZWaveTransactionResponse@1770002
2020-01-01 14:49:52.445 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2020-01-01 14:49:52.445 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node Init transaction completed with response COMPLETE
2020-01-01 14:49:52.446 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node advancer: Restored from file - skipping static initialisation
2020-01-01 14:49:52.447 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 00 60 02 99 
2020-01-01 14:49:52.447 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node advancer - advancing to STATIC_END
2020-01-01 14:49:52.448 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 04 00 60 02 99 
2020-01-01 14:49:52.448 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:52.449 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2020-01-01 14:49:52.449 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Updating node properties.
2020-01-01 14:49:52.450 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 3729: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.450 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Updating node properties. MAN=271
2020-01-01 14:49:52.451 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Updating node properties. MAN=271. SET. Was 271
2020-01-01 14:49:52.452 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2020-01-01 14:49:52.452 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Properties synchronised
2020-01-01 14:49:52.453 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:52.454 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2020-01-01 14:49:52.455 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3729: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.456 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2020-01-01 14:49:52.457 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 60 01 9B 
2020-01-01 14:49:52.457 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:52.458 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.460 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=RequestNodeInfo[96], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.462 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=RequestNodeInfo[96], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.463 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3729: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.464 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:52.465 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3729: [WAIT_RESPONSE] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.467 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=RequestNodeInfo[96], type=Response[1], dest=255, callback=0, payload=01 
2020-01-01 14:49:52.468 [DEBUG] [lmessage.RequestNodeInfoMessageClass] - Request node info successfully placed on stack.
2020-01-01 14:49:52.469 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 3729: Advanced to WAIT_DATA
2020-01-01 14:49:52.470 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 2: TID 3729: Transaction not completed
2020-01-01 14:49:52.471 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-01 14:49:52.472 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.474 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=null, profile1=null, profile2=null, associations=[node_1_1]]: Adding Controller (node_1_1)
2020-01-01 14:49:52.477 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising Thing Node...
2020-01-01 14:49:52.479 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:scene_number for DecimalType
2020-01-01 14:49:52.481 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:scene_number for DecimalType
2020-01-01 14:49:52.482 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:sensor_power for DecimalType
2020-01-01 14:49:52.484 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:sensor_power for DecimalType
2020-01-01 14:49:52.485 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_kwh for DecimalType
2020-01-01 14:49:52.487 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_kwh for DecimalType
2020-01-01 14:49:52.488 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_watts for DecimalType
2020-01-01 14:49:52.490 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_watts for DecimalType
2020-01-01 14:49:52.492 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_reset for OnOffType
2020-01-01 14:49:52.494 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_reset for OnOffType
2020-01-01 14:49:52.495 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:config_decimal_param19 for DecimalType
2020-01-01 14:49:52.497 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:config_decimal_param19 for DecimalType
2020-01-01 14:49:52.498 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_general for OnOffType
2020-01-01 14:49:52.500 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_general for OnOffType
2020-01-01 14:49:52.501 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_system for OnOffType
2020-01-01 14:49:52.503 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_system for OnOffType
2020-01-01 14:49:52.505 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_power for OnOffType
2020-01-01 14:49:52.507 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_power for OnOffType
2020-01-01 14:49:52.508 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_heat for OnOffType
2020-01-01 14:49:52.510 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_heat for OnOffType
2020-01-01 14:49:52.511 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer1 for OnOffType
2020-01-01 14:49:52.514 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer1 for PercentType
2020-01-01 14:49:52.515 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer1 for PercentType
2020-01-01 14:49:52.516 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer1 for PercentType
2020-01-01 14:49:52.517 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:sensor_power1 for DecimalType
2020-01-01 14:49:52.518 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:sensor_power1 for DecimalType
2020-01-01 14:49:52.519 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_kwh1 for DecimalType
2020-01-01 14:49:52.520 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_kwh1 for DecimalType
2020-01-01 14:49:52.521 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:meter_watts1 for DecimalType
2020-01-01 14:49:52.522 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:meter_watts1 for DecimalType
2020-01-01 14:49:52.522 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_general1 for OnOffType
2020-01-01 14:49:52.523 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_general1 for OnOffType
2020-01-01 14:49:52.524 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:notification_send1 for DecimalType
2020-01-01 14:49:52.525 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:notification_send1 for DecimalType
2020-01-01 14:49:52.526 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_system1 for OnOffType
2020-01-01 14:49:52.527 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_system1 for OnOffType
2020-01-01 14:49:52.528 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_power1 for OnOffType
2020-01-01 14:49:52.529 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_power1 for OnOffType
2020-01-01 14:49:52.529 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:alarm_heat1 for OnOffType
2020-01-01 14:49:52.531 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:alarm_heat1 for OnOffType
2020-01-01 14:49:52.531 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer2 for OnOffType
2020-01-01 14:49:52.533 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising cmd channel zwave:device:9412cbc8:node5:switch_dimmer2 for PercentType
2020-01-01 14:49:52.533 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer2 for PercentType
2020-01-01 14:49:52.534 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Initialising state channel zwave:device:9412cbc8:node5:switch_dimmer2 for PercentType
2020-01-01 14:49:52.535 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Polling initialised at 86400 seconds - start in 22464000 milliseconds.
2020-01-01 14:49:52.536 [DEBUG] [l.initialization.ZWaveNodeSerializer] - NODE 5: Serialise aborted as static stages not complete
2020-01-01 14:49:52.537 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node advancer - advancing to DYNAMIC_VALUES
2020-01-01 14:49:52.538 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Got an event from Z-Wave network: ZWaveInitializationStateEvent
2020-01-01 14:49:52.539 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node advancer: DYNAMIC_VALUES - checking COMMAND_CLASS_ALARM
2020-01-01 14:49:52.540 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Found 1 instances of COMMAND_CLASS_ALARM for endpoint 0
2020-01-01 14:49:52.540 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Node advancer: DYNAMIC_VALUES - checking COMMAND_CLASS_SWITCH_MULTILEVEL
2020-01-01 14:49:52.541 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: Found 1 instances of COMMAND_CLASS_SWITCH_MULTILEVEL for endpoint 0
2020-01-01 14:49:52.541 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 5: Creating new message for command SWITCH_MULTILEVEL_GET
2020-01-01 14:49:52.543 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2020-01-01 14:49:52.543 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: Command Class COMMAND_CLASS_SWITCH_MULTILEVEL is NOT required to be secured
2020-01-01 14:49:52.544 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 5: ZWaveCommandClassTransactionPayload - send to node
2020-01-01 14:49:52.545 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2020-01-01 14:49:52.546 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: Command Class COMMAND_CLASS_SWITCH_MULTILEVEL is NOT required to be secured
2020-01-01 14:49:52.546 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: sendTransaction org.openhab.binding.zwave.internal.protocol.transaction.ZWaveCommandClassTransactionPayload@126e578
2020-01-01 14:49:52.547 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Adding to device queue
2020-01-01 14:49:52.548 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Added 3730 to queue - size 50
2020-01-01 14:49:52.548 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2020-01-01 14:49:52.630 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 16 00 49 84 02 10 04 10 01 5E 86 72 5A 73 32 85 59 25 20 27 70 7A 66 
2020-01-01 14:49:52.632 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationUpdate[73], type=Request[0], dest=2, callback=132, payload=84 02 10 04 10 01 5E 86 72 5A 73 32 85 59 25 20 27 70 7A 
2020-01-01 14:49:52.634 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationUpdate[73], type=Request[0], dest=2, callback=132, payload=84 02 10 04 10 01 5E 86 72 5A 73 32 85 59 25 20 27 70 7A 
2020-01-01 14:49:52.634 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 3729: [WAIT_DATA] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.635 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2020-01-01 14:49:52.636 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 3729: [WAIT_DATA] priority=Controller, requiresResponse=true, callback: 0
2020-01-01 14:49:52.636 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 3729: (Callback 0)
2020-01-01 14:49:52.637 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 3729: callback 0
2020-01-01 14:49:52.638 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=ApplicationUpdate[73], type=Request[0], dest=2, callback=132, payload=84 02 10 04 10 01 5E 86 72 5A 73 32 85 59 25 20 27 70 7A