Thing Type Description
Chain Actuator

Overview

FAKRO ZWS12 chain motor thanks to their small dimensions and suitable force output are ideal fr root window operating, being
fully compatible with the Z-Wave Plus system. The motors can be applied in both centre pivot and top hung and pivot roof windows
as well as windows of non-standard dimensions.

Inclusion Information

‘Autoinclusion - This feature allow you to add hard to reach devices to Z-Wave network. 3-imes ON and OFF the power actuator
(OFF-ON-OFFON-OFF-ON) causes the introduction of actuator to Autoinclusion mode.

Pease note that the procedure has been started the time between on and off can not exceed 20s. Autoinclusion mode is activated
{or a maximum of 10 minutes. During this time, we can add an actuator to any Z-Wave controller running in the Include procedure.

Include - This function allow you to add actuator to the network Z-Wave.

Follow the procedure adding device to the network Z-Wave according to user manual supplied with the product. Then, press the
programming button P on the actuator for 1 second.

Exclusion Information

Exclude - This function allows you to remove actuator from the network Z-Wave. Follw the procedure removing device from the
network Z Wave according to user manual supplied with the product. Then, press the programming button P on the actuator or 1
second. Function removes information only about network Z-Wave.