=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.09.26 15:00:26 =~=~=~=~=~=~=~=~=~=~=~= [?2004h[?1049h(B[?7h[?1h=[?1h=[?25l(B(B[ Lesen … ](B(B[ 95 Zeilen gelesen ](B(B GNU nano 5.4 /etc/openhabian.conf (B (B^G(B Hilfe (B^O(B Speichern (B^W(B Wo ist (B^K(B Ausschneid(B^T(B Ausführen (B^C(B Position (B^X(B Beenden (B^R(B Datei öffn(B^\(B Ersetzen (B^U(B Einfügen (B^J(B Ausrichten(B^_(B Zu Zeile # Modify your openHABian settings # Handle with care, only touch if you need to!! # This file will only be used on unattended initial install. # If you want to change anything after unattended install completed, use menu i(B>(B# Hostname to set this one to (Bhostname=openhabian2 # if it exists, the default user (with its working environment) will be renamed(B>(Busername=openhabian # ... and given this password. The password will be removed from this file afte(B>(Buserpw=openhabian # set this to download a SSH key and authorize the owner to login as the admin (B>(Badminkeyurl="" # Language and timezone. See Debian documentation for valid values. (Btimezone=Europe/Berlin locales="en_US.UTF-8 de_DE.UTF-8" system_default_locale="en_US.UTF-8" # WiFi settings. An ethernet connection is recommended. (B[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l78 # If you have a RPi4, RPi3, RPi0W or a supported external WiFi dongle, the WiFi (B[?12l[?25h[?25l78 # interface can be setup and used for the initial installation. (B[?12l[?25h[?25l78 # Fill in your SSID and password below, leave empty or put comment in front to (B[?12l[?25h[?25l78 # have your WiFi remain unchanged/uninitialized. Make sure your Ethernet works. (B[?12l[?25h[?25l78 # ATTENTION: you need to escape these special characters: $, `, ", \, (newline) (B[?12l[?25h[?25l78 # 'Escaping' means to put an additional \ in front of that character (B[?12l[?25h[?25l78 wifi_ssid="" [?12l[?25h[?25l78 wifi_password="" [?12l[?25h[?25l78 [?12l[?25h[?25l78 # Wi-Fi setting. Select a two-letter country code suitable for your location (B[?12l[?25h[?25l78 # E.g. US (default), DE, AU, NZ... (B[?12l[?25h[?25l78 # You may infringe on local legislature otherwise (B[?12l[?25h[?25l78 # See https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 or /usr/share/zoneinfo/z(B>(B[?12l[?25h[?25l78 wifi_country="" [?12l[?25h[?25l78 [?12l[?25h[?25l78 # Eventually disable all IPv6 e.g. on installation problems (B[?12l[?25h[?25l78 # values: "enable", "disable" (B[?12l[?25h[?25l78 ipv6=enable [?12l[?25h[?25l78 [?12l[?25h[?25l78 # repo and branch to clone from (B[?12l[?25h[?25l78 repositoryurl=https://github.com/openhab/openhabian.git [?12l[?25h[?25l78 clonebranch=openHAB3 [?12l[?25h[?25l78 [?12l[?25h[?25l78 # debug verbosity mode (B[?12l[?25h[?25l78 # off, on (verbose output in log) or maximum (show every command) (B[?12l[?25h[?25l78 debugmode=off [?12l[?25h[?25l78 [?12l[?25h[?25l78 # fake hardware (B[?12l[?25h[?25l78 # force treating your box as if it was a ... (B[?12l[?25h[?25l78 # pi4, pi4_8gb, cm4, pi400, pi3, cm3, pi3+, cm3+, pi2, pi1, cm1, pi0, pi0w (B[?12l[?25h[?25l78 #hw=pi4 (B[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l(B*(B [?12l[?25h[?25l [?12l[?25h[?25l [?12l[?25h[?25lm[?12l[?25h[?25la[?12l[?25h[?25lx[?12l[?25h[?25li[?12l[?25h[?25lm[?12l[?25h[?25lu[?12l[?25h[?25lm[?12l[?25h[?25l [?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l[?12l[?25h[?25l78  [?12l[?25h[?25l78 # Hardware architecture(B[?12l[?25h[?25l78  # x86_64, amd64, armv6l, armv7l, aarch64, arm64(B[?12l[?25h[?25l78  hwarch=amd64[?12l[?25h[?25l78  [?12l[?25h[?25l78 # OS distribution/release(B[?12l[?25h[?25l78  # Valid arguments: raspios, raspbian, debian, ubuntu, stretch, buster, bionic, (B>(B[?12l[?25h[?25l78  osrelease=debian[?12l[?25h[?25l78  [?12l[?25h[?25l78 # Java architecture mode(B[?12l[?25h[?25l (BGeänderten Puffer speichern?  J(B Ja (B N(B Nein (B^C(B Abbrechen[?12l[?25h[?25l (B^G(B Hilfe(BM-D(B DOS-Format(BM-A(B Anhängen(BM-B(B Sicherungsdatei (B^C(B Abbrechen (BM-M(B Mac-Format(BM-P(B Vorn anfügen (B^T(B Dateien … (BDateiname zum Speichern: /etc/openhabian.conf(B[?12l[?25h[?25l (B[ Wird geschrieben … ](B(B (B(B[ 95 Zeilen geschrieben ](B [?12l[?25h[?1049l [?1l>[?2004l[?2004hroot@Debian:/home/int5749# [?2004l [?2004hroot@Debian:/home/int5749# sudo nano /etc/openhabian.conf [?2004l [?2004h[?1049h(B[?7h[?1h=[?1h=[?25l(B(B[ Lesen … ](B(B[ 95 Zeilen gelesen ](B(B GNU nano 5.4 /etc/openhabian.conf (B (B^G(B Hilfe (B^O(B Speichern (B^W(B Wo ist (B^K(B Ausschneid(B^T(B Ausführen (B^C(B Position (B^X(B Beenden (B^R(B Datei öffn(B^\(B Ersetzen (B^U(B Einfügen (B^J(B Ausrichten(B^_(B Zu Zeile # Modify your openHABian settings # Handle with care, only touch if you need to!! # This file will only be used on unattended initial install. # If you want to change anything after unattended install completed, use menu i(B>(B# Hostname to set this one to (Bhostname=openhabian2 # if it exists, the default user (with its working environment) will be renamed(B>(Busername=openhabian # ... and given this password. The password will be removed from this file afte(B>(Buserpw=openhabian # set this to download a SSH key and authorize the owner to login as the admin (B>(Badminkeyurl="" # Language and timezone. See Debian documentation for valid values. (Btimezone=Europe/Berlin locales="en_US.UTF-8 de_DE.UTF-8" system_default_locale="en_US.UTF-8" # WiFi settings. An ethernet connection is recommended. (B[?12l[?25h[?25lWiFi settings. An ethernet connection is recommended.If you have a RPi4, RPi3, RPi0W or a supported external WiFi dongle, the WiFiinterface can be setup and used for the initialation.(B # Fill in your SSID and password below, leave empty or put comment in front tohave your WiFi remain unchanged/uninitialized. Make sure your Ethernet works. # ATTENTION: you need to escape these special characters: $, `, ", \, (newline)'Escaping' means to put an additional \ in front of that character(B wifi_ssid="" wifi_password="" Wi-Fi setting. Select a two-letter country code suitable for your location(B # E.g. US (default), DE, AU, NZ... # You may infringe on local legislature otherwiseSee https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 or /usr/share/zoneinfo/z(B>(Bwifi_country="" # Eventually disable all IPv6 e.g. on installation problems # values: "enable", "disable" (Bipv6=enable [?12l[?25h[?25l# values: "enable", "disable" (Bipv6=enable repo and branch to clone from(B repositoryurl=https://github.com/openhab/openhabian.git clonebranch=openHAB3 debug verbosity mode(B # off, on (verbose output in log) or maximum (show every command) (Bdebugmode=maximumfake hardware(Bforce treating your box as if it was a ...pi4, pi4_8gb, cm4, pi400, pi3, cm3, pi3+, cm3+, pi2, pi1, cm1, pi0, pi0w #hw=pi4(B # Hardware architecturex86_64, amd64, armv6l, armv7l, aarch64, arm64(B hwarch=amd64 [?12l[?25h[?25l[?12l[?25h[?1049l [?1l>[?2004l[?2004hroot@Debian:/home/int5749# sudo nano /etc/openhabian.confhutdown nowudo nano /etc/openhabian.conf cp /opt/openhabian/build-image/openhabian.conf /etc/openhabian.confln -s /opt/openhabian/openhabian-setup.sh /usr/local/bin/openhabian-configgit clone -b openHAB3 https://github.com/openhab/openhabian.git /opt/openhabianapt-get install git git clone -b openHAB3 https://github.com/openhab/openhabian.git /opt/openhabianln -s /opt/openhabian/openhabian-setup.sh /usr/local/bin/openhabian-configcp /opt/openhabian/build-image/openhabian.conf /etc/openhabian.confsudo nano /etc/openhabian.conf hutdown nowudo nano /etc/openhabian.conf ^[[200~openhabian-config unattended~ root@Debian:/home/int5749# ^[[200~openhabian-config unattended~  [?2004l 2021-09-26_15:02:30_CEST [openHABian] Checking for root privileges... OK + export UNATTENDED SILENT DEBUGMAX INTERACTIVE + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/auth.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/backup.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/config.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/ext-storage.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/find.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/habapp.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/helpers.bash ++ ESC='\033[' ++ COL_DEF='\033[39;49;00m' ++ COL_RED='\033[31;01m' ++ COL_GREEN='\033[32;01m' ++ COL_YELLOW='\033[33;01m' ++ COL_BLUE='\033[34;01m' ++ COL_MAGENTA='\033[35;01m' ++ COL_CYAN='\033[36;01m' ++ COL_LGRAY='\033[37;01m' ++ COL_DGRAY='\033[90;01m' ++ export COL_DEF COL_RED COL_GREEN COL_YELLOW COL_BLUE COL_MAGENTA COL_CYAN COL_LGRAY COL_DGRAY + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/influxdb+grafana.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/java-jre.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/menu.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/nodejs-apps.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/openhab.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/openhabian.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/packages.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/system.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/vpn.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/wifi.bash + for shfile in "${BASEDIR:-/opt/openhabian}"/functions/*.bash + source /opt/openhabian/functions/zram.bash ++ pwd + OLDWD=/home/int5749 + cd /opt + update_openhabian_conf + local configFile=/etc/openhabian.conf + local referenceConfig=/opt/openhabian/openhabian.conf.dist + cp /etc/openhabian.conf /etc/openhabian.conf.BAK + read -r line + [[ # Modify your openHABian settings =~ ^(#)?[a-zA-Z] ]] + echo '# Modify your openHABian settings' + read -r line + [[ # Handle with care, only touch if you need to!! =~ ^(#)?[a-zA-Z] ]] + echo '# Handle with care, only touch if you need to!!' + read -r line + [[ # This file will only be used on unattended initial install. =~ ^(#)?[a-zA-Z] ]] + echo '# This file will only be used on unattended initial install.' + read -r line + [[ # If you want to change anything after unattended install completed, use menu in openhabian-config. =~ ^(#)?[a-zA-Z] ]] + echo '# If you want to change anything after unattended install completed, use menu in openhabian-config.' + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Hostname to set this one to =~ ^(#)?[a-zA-Z] ]] + echo '# Hostname to set this one to' + read -r line + [[ hostname=openhabian =~ ^(#)?[a-zA-Z] ]] + parsed=hostname=openhabian + [[ hostname=openhabian =~ ^#[a-zA-Z] ]] ++ echo hostname=openhabian ++ cut -d= -f1 + param=hostname + [[ -v hostname ]] + [[ openhabian2 == *\ * ]] + echo hostname=openhabian2 + read -r line + [[ # if it exists, the default user (with its working environment) will be renamed to this username given here ... =~ ^(#)?[a-zA-Z] ]] + echo '# if it exists, the default user (with its working environment) will be renamed to this username given here ...' + read -r line + [[ username=openhabian =~ ^(#)?[a-zA-Z] ]] + parsed=username=openhabian + [[ username=openhabian =~ ^#[a-zA-Z] ]] ++ echo username=openhabian ++ cut -d= -f1 + param=username + [[ -v username ]] + [[ openhabian == *\ * ]] + echo username=openhabian + read -r line + [[ # ... and given this password. The password will be removed from this file after completion for security reasons. =~ ^(#)?[a-zA-Z] ]] + echo '# ... and given this password. The password will be removed from this file after completion for security reasons.' + read -r line + [[ userpw=openhabian =~ ^(#)?[a-zA-Z] ]] + parsed=userpw=openhabian + [[ userpw=openhabian =~ ^#[a-zA-Z] ]] ++ echo userpw=openhabian ++ cut -d= -f1 + param=userpw + [[ -v userpw ]] + [[ openhabian == *\ * ]] + echo userpw=openhabian + read -r line + [[ # set this to download a SSH key and authorize the owner to login as the admin user =~ ^(#)?[a-zA-Z] ]] + echo '# set this to download a SSH key and authorize the owner to login as the admin user' + read -r line + [[ adminkeyurl="" =~ ^(#)?[a-zA-Z] ]] + parsed='adminkeyurl=""' + [[ adminkeyurl="" =~ ^#[a-zA-Z] ]] ++ echo 'adminkeyurl=""' ++ cut -d= -f1 + param=adminkeyurl + [[ -v adminkeyurl ]] + [[ '' == *\ * ]] + echo adminkeyurl= + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Language and timezone. See Debian documentation for valid values. =~ ^(#)?[a-zA-Z] ]] + echo '# Language and timezone. See Debian documentation for valid values.' + read -r line + [[ timezone=Europe/Berlin =~ ^(#)?[a-zA-Z] ]] + parsed=timezone=Europe/Berlin + [[ timezone=Europe/Berlin =~ ^#[a-zA-Z] ]] ++ echo timezone=Europe/Berlin ++ cut -d= -f1 + param=timezone + [[ -v timezone ]] + [[ Europe/Berlin == *\ * ]] + echo timezone=Europe/Berlin + read -r line + [[ locales="en_US.UTF-8 de_DE.UTF-8" =~ ^(#)?[a-zA-Z] ]] + parsed='locales="en_US.UTF-8 de_DE.UTF-8"' + [[ locales="en_US.UTF-8 de_DE.UTF-8" =~ ^#[a-zA-Z] ]] ++ echo 'locales="en_US.UTF-8 de_DE.UTF-8"' ++ cut -d= -f1 + param=locales + [[ -v locales ]] + [[ en_US.UTF-8 de_DE.UTF-8 == *\ * ]] + echo 'locales="en_US.UTF-8 de_DE.UTF-8"' + read -r line + [[ system_default_locale="en_US.UTF-8" =~ ^(#)?[a-zA-Z] ]] + parsed='system_default_locale="en_US.UTF-8"' + [[ system_default_locale="en_US.UTF-8" =~ ^#[a-zA-Z] ]] ++ echo 'system_default_locale="en_US.UTF-8"' ++ cut -d= -f1 + param=system_default_locale + [[ -v system_default_locale ]] + [[ en_US.UTF-8 == *\ * ]] + echo system_default_locale=en_US.UTF-8 + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # WiFi settings. An ethernet connection is recommended. =~ ^(#)?[a-zA-Z] ]] + echo '# WiFi settings. An ethernet connection is recommended.' + read -r line + [[ # If you have a RPi4, RPi3, RPi0W or a supported external WiFi dongle, the WiFi =~ ^(#)?[a-zA-Z] ]] + echo '# If you have a RPi4, RPi3, RPi0W or a supported external WiFi dongle, the WiFi' + read -r line + [[ # interface can be setup and used for the initial installation. =~ ^(#)?[a-zA-Z] ]] + echo '# interface can be setup and used for the initial installation.' + read -r line + [[ # Fill in your SSID and password below, leave empty or put comment in front to =~ ^(#)?[a-zA-Z] ]] + echo '# Fill in your SSID and password below, leave empty or put comment in front to' + read -r line + [[ # have your WiFi remain unchanged/uninitialized. Make sure your Ethernet works. =~ ^(#)?[a-zA-Z] ]] + echo '# have your WiFi remain unchanged/uninitialized. Make sure your Ethernet works.' + read -r line + [[ # ATTENTION: you need to escape these special characters: $, `, ", \, (newline) =~ ^(#)?[a-zA-Z] ]] + echo '# ATTENTION: you need to escape these special characters: $, `, ", \, (newline)' + read -r line + [[ # 'Escaping' means to put an additional \ in front of that character =~ ^(#)?[a-zA-Z] ]] + echo '# '\''Escaping'\'' means to put an additional \ in front of that character' + read -r line + [[ wifi_ssid="" =~ ^(#)?[a-zA-Z] ]] + parsed='wifi_ssid=""' + [[ wifi_ssid="" =~ ^#[a-zA-Z] ]] ++ echo 'wifi_ssid=""' ++ cut -d= -f1 + param=wifi_ssid + [[ -v wifi_ssid ]] + [[ '' == *\ * ]] + echo wifi_ssid= + read -r line + [[ wifi_password="" =~ ^(#)?[a-zA-Z] ]] + parsed='wifi_password=""' + [[ wifi_password="" =~ ^#[a-zA-Z] ]] ++ echo 'wifi_password=""' ++ cut -d= -f1 + param=wifi_password + [[ -v wifi_password ]] + [[ '' == *\ * ]] + echo wifi_password= + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Wi-Fi setting. Select a two-letter country code suitable for your location =~ ^(#)?[a-zA-Z] ]] + echo '# Wi-Fi setting. Select a two-letter country code suitable for your location' + read -r line + [[ # E.g. US (default), DE, AU, NZ... =~ ^(#)?[a-zA-Z] ]] + echo '# E.g. US (default), DE, AU, NZ...' + read -r line + [[ # You may infringe on local legislature otherwise =~ ^(#)?[a-zA-Z] ]] + echo '# You may infringe on local legislature otherwise' + read -r line + [[ # See https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 or /usr/share/zoneinfo/zone.tab =~ ^(#)?[a-zA-Z] ]] + echo '# See https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 or /usr/share/zoneinfo/zone.tab' + read -r line + [[ wifi_country="" =~ ^(#)?[a-zA-Z] ]] + parsed='wifi_country=""' + [[ wifi_country="" =~ ^#[a-zA-Z] ]] ++ echo 'wifi_country=""' ++ cut -d= -f1 + param=wifi_country + [[ -v wifi_country ]] + [[ '' == *\ * ]] + echo wifi_country= + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Eventually disable all IPv6 e.g. on installation problems =~ ^(#)?[a-zA-Z] ]] + echo '# Eventually disable all IPv6 e.g. on installation problems' + read -r line + [[ # values: "enable", "disable" =~ ^(#)?[a-zA-Z] ]] + echo '# values: "enable", "disable"' + read -r line + [[ ipv6=enable =~ ^(#)?[a-zA-Z] ]] + parsed=ipv6=enable + [[ ipv6=enable =~ ^#[a-zA-Z] ]] ++ echo ipv6=enable ++ cut -d= -f1 + param=ipv6 + [[ -v ipv6 ]] + [[ enable == *\ * ]] + echo ipv6=enable + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # repo and branch to clone from =~ ^(#)?[a-zA-Z] ]] + echo '# repo and branch to clone from' + read -r line + [[ repositoryurl=https://github.com/openhab/openhabian.git =~ ^(#)?[a-zA-Z] ]] + parsed=repositoryurl=https://github.com/openhab/openhabian.git + [[ repositoryurl=https://github.com/openhab/openhabian.git =~ ^#[a-zA-Z] ]] ++ echo repositoryurl=https://github.com/openhab/openhabian.git ++ cut -d= -f1 + param=repositoryurl + [[ -v repositoryurl ]] + [[ https://github.com/openhab/openhabian.git == *\ * ]] + echo repositoryurl=https://github.com/openhab/openhabian.git + read -r line + [[ clonebranch=openHAB3 =~ ^(#)?[a-zA-Z] ]] + parsed=clonebranch=openHAB3 + [[ clonebranch=openHAB3 =~ ^#[a-zA-Z] ]] ++ echo clonebranch=openHAB3 ++ cut -d= -f1 + param=clonebranch + [[ -v clonebranch ]] + [[ openHAB3 == *\ * ]] + echo clonebranch=openHAB3 + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # debug verbosity mode =~ ^(#)?[a-zA-Z] ]] + echo '# debug verbosity mode' + read -r line + [[ # off, on (verbose output in log) or maximum (show every command) =~ ^(#)?[a-zA-Z] ]] + echo '# off, on (verbose output in log) or maximum (show every command)' + read -r line + [[ debugmode=off =~ ^(#)?[a-zA-Z] ]] + parsed=debugmode=off + [[ debugmode=off =~ ^#[a-zA-Z] ]] ++ echo debugmode=off ++ cut -d= -f1 + param=debugmode + [[ -v debugmode ]] + [[ maximum == *\ * ]] + echo debugmode=maximum + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # fake hardware =~ ^(#)?[a-zA-Z] ]] + echo '# fake hardware' + read -r line + [[ # force treating your box as if it was a ... =~ ^(#)?[a-zA-Z] ]] + echo '# force treating your box as if it was a ...' + read -r line + [[ # pi4, pi4_8gb, cm4, pi400, pi3, cm3, pi3+, cm3+, pi2, pi1, cm1, pi0, pi0w =~ ^(#)?[a-zA-Z] ]] + echo '# pi4, pi4_8gb, cm4, pi400, pi3, cm3, pi3+, cm3+, pi2, pi1, cm1, pi0, pi0w' + read -r line + [[ #hw=pi4 =~ ^(#)?[a-zA-Z] ]] + parsed='#hw=pi4' + [[ #hw=pi4 =~ ^#[a-zA-Z] ]] + parsed=hw=pi4 ++ echo hw=pi4 ++ cut -d= -f1 + param=hw + [[ -v hw ]] + echo '#hw=pi4' + eval hw=pi4 ++ hw=pi4 + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Hardware architecture =~ ^(#)?[a-zA-Z] ]] + echo '# Hardware architecture' + read -r line + [[ # x86_64, amd64, armv6l, armv7l, aarch64, arm64 =~ ^(#)?[a-zA-Z] ]] + echo '# x86_64, amd64, armv6l, armv7l, aarch64, arm64' + read -r line + [[ #hwarch=armv7l =~ ^(#)?[a-zA-Z] ]] + parsed='#hwarch=armv7l' + [[ #hwarch=armv7l =~ ^#[a-zA-Z] ]] + parsed=hwarch=armv7l ++ echo hwarch=armv7l ++ cut -d= -f1 + param=hwarch + [[ -v hwarch ]] + [[ amd64 == *\ * ]] + echo hwarch=amd64 + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # OS distribution/release =~ ^(#)?[a-zA-Z] ]] + echo '# OS distribution/release' + read -r line + [[ # Valid arguments: raspios, raspbian, debian, ubuntu, stretch, buster, bionic, focal =~ ^(#)?[a-zA-Z] ]] + echo '# Valid arguments: raspios, raspbian, debian, ubuntu, stretch, buster, bionic, focal' + read -r line + [[ #osrelease=buster =~ ^(#)?[a-zA-Z] ]] + parsed='#osrelease=buster' + [[ #osrelease=buster =~ ^#[a-zA-Z] ]] + parsed=osrelease=buster ++ echo osrelease=buster ++ cut -d= -f1 + param=osrelease + [[ -v osrelease ]] + [[ debian == *\ * ]] + echo osrelease=debian + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Java architecture mode =~ ^(#)?[a-zA-Z] ]] + echo '# Java architecture mode' + read -r line + [[ # Valid arguments: "Adopt11", "Zulu11-32", or "Zulu11-64" =~ ^(#)?[a-zA-Z] ]] + echo '# Valid arguments: "Adopt11", "Zulu11-32", or "Zulu11-64"' + read -r line + [[ java_opt=Zulu11-32 =~ ^(#)?[a-zA-Z] ]] + parsed=java_opt=Zulu11-32 + [[ java_opt=Zulu11-32 =~ ^#[a-zA-Z] ]] ++ echo java_opt=Zulu11-32 ++ cut -d= -f1 + param=java_opt + [[ -v java_opt ]] + [[ Zulu11-64 == *\ * ]] + echo java_opt=Zulu11-64 + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # openHAB Log Viewer (frontail) theme =~ ^(#)?[a-zA-Z] ]] + echo '# openHAB Log Viewer (frontail) theme' + read -r line + [[ # Valid arguments: "light", "dark" =~ ^(#)?[a-zA-Z] ]] + echo '# Valid arguments: "light", "dark"' + read -r line + [[ frontailtheme=light =~ ^(#)?[a-zA-Z] ]] + parsed=frontailtheme=light + [[ frontailtheme=light =~ ^#[a-zA-Z] ]] ++ echo frontailtheme=light ++ cut -d= -f1 + param=frontailtheme + [[ -v frontailtheme ]] + [[ light == *\ * ]] + echo frontailtheme=light + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # install zram per default, set to "disable" to skip installation =~ ^(#)?[a-zA-Z] ]] + echo '# install zram per default, set to "disable" to skip installation' + read -r line + [[ zraminstall=enable =~ ^(#)?[a-zA-Z] ]] + parsed=zraminstall=enable + [[ zraminstall=enable =~ ^#[a-zA-Z] ]] ++ echo zraminstall=enable ++ cut -d= -f1 + param=zraminstall + [[ -v zraminstall ]] + [[ disable == *\ * ]] + echo zraminstall=disable + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # start comitup hotspot if internet is not reachable =~ ^(#)?[a-zA-Z] ]] + echo '# start comitup hotspot if internet is not reachable' + read -r line + [[ hotspot=enable =~ ^(#)?[a-zA-Z] ]] + parsed=hotspot=enable + [[ hotspot=enable =~ ^#[a-zA-Z] ]] ++ echo hotspot=enable ++ cut -d= -f1 + param=hotspot + [[ -v hotspot ]] + [[ enable == *\ * ]] + echo hotspot=enable + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # external SD card device to backup and mirror the internal SD card to =~ ^(#)?[a-zA-Z] ]] + echo '# external SD card device to backup and mirror the internal SD card to' + read -r line + [[ #backupdrive=/dev/sda =~ ^(#)?[a-zA-Z] ]] + parsed='#backupdrive=/dev/sda' + [[ #backupdrive=/dev/sda =~ ^#[a-zA-Z] ]] + parsed=backupdrive=/dev/sda ++ echo backupdrive=/dev/sda ++ cut -d= -f1 + param=backupdrive + [[ -v backupdrive ]] + echo '#backupdrive=/dev/sda' + eval backupdrive=/dev/sda ++ backupdrive=/dev/sda + read -r line + [[ storageconfig=openhab-dir =~ ^(#)?[a-zA-Z] ]] + parsed=storageconfig=openhab-dir + [[ storageconfig=openhab-dir =~ ^#[a-zA-Z] ]] ++ echo storageconfig=openhab-dir ++ cut -d= -f1 + param=storageconfig + [[ -v storageconfig ]] + [[ openhab-dir == *\ * ]] + echo storageconfig=openhab-dir + read -r line + [[ storagedir=/storage =~ ^(#)?[a-zA-Z] ]] + parsed=storagedir=/storage + [[ storagedir=/storage =~ ^#[a-zA-Z] ]] ++ echo storagedir=/storage ++ cut -d= -f1 + param=storagedir + [[ -v storagedir ]] + [[ /storage == *\ * ]] + echo storagedir=/storage + read -r line + [[ storagetapes=15 =~ ^(#)?[a-zA-Z] ]] + parsed=storagetapes=15 + [[ storagetapes=15 =~ ^#[a-zA-Z] ]] ++ echo storagetapes=15 ++ cut -d= -f1 + param=storagetapes + [[ -v storagetapes ]] + [[ 15 == *\ * ]] + echo storagetapes=15 + read -r line + [[ storagecapacity=1024 =~ ^(#)?[a-zA-Z] ]] + parsed=storagecapacity=1024 + [[ storagecapacity=1024 =~ ^#[a-zA-Z] ]] ++ echo storagecapacity=1024 ++ cut -d= -f1 + param=storagecapacity + [[ -v storagecapacity ]] + [[ 1024 == *\ * ]] + echo storagecapacity=1024 + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # mail relay settings =~ ^(#)?[a-zA-Z] ]] + echo '# mail relay settings' + read -r line + [[ #adminmail=john.doe@foo.bar =~ ^(#)?[a-zA-Z] ]] + parsed='#adminmail=john.doe@foo.bar' + [[ #adminmail=john.doe@foo.bar =~ ^#[a-zA-Z] ]] + parsed=adminmail=john.doe@foo.bar ++ echo adminmail=john.doe@foo.bar ++ cut -d= -f1 + param=adminmail + [[ -v adminmail ]] + echo '#adminmail=john.doe@foo.bar' + eval adminmail=john.doe@foo.bar ++ adminmail=john.doe@foo.bar + read -r line + [[ #relayuser=john.doe@foo.bar =~ ^(#)?[a-zA-Z] ]] + parsed='#relayuser=john.doe@foo.bar' + [[ #relayuser=john.doe@foo.bar =~ ^#[a-zA-Z] ]] + parsed=relayuser=john.doe@foo.bar ++ echo relayuser=john.doe@foo.bar ++ cut -d= -f1 + param=relayuser + [[ -v relayuser ]] + echo '#relayuser=john.doe@foo.bar' + eval relayuser=john.doe@foo.bar ++ relayuser=john.doe@foo.bar + read -r line + [[ #relaypass=secret =~ ^(#)?[a-zA-Z] ]] + parsed='#relaypass=secret' + [[ #relaypass=secret =~ ^#[a-zA-Z] ]] + parsed=relaypass=secret ++ echo relaypass=secret ++ cut -d= -f1 + param=relaypass + [[ -v relaypass ]] + echo '#relaypass=secret' + eval relaypass=secret ++ relaypass=secret + read -r line + [[ #smarthost=smtp.gmail.com =~ ^(#)?[a-zA-Z] ]] + parsed='#smarthost=smtp.gmail.com' + [[ #smarthost=smtp.gmail.com =~ ^#[a-zA-Z] ]] + parsed=smarthost=smtp.gmail.com ++ echo smarthost=smtp.gmail.com ++ cut -d= -f1 + param=smarthost + [[ -v smarthost ]] + echo '#smarthost=smtp.gmail.com' + eval smarthost=smtp.gmail.com ++ smarthost=smtp.gmail.com + read -r line + [[ #smartport=587 =~ ^(#)?[a-zA-Z] ]] + parsed='#smartport=587' + [[ #smartport=587 =~ ^#[a-zA-Z] ]] + parsed=smartport=587 ++ echo smartport=587 ++ cut -d= -f1 + param=smartport + [[ -v smartport ]] + echo '#smartport=587' + eval smartport=587 ++ smartport=587 + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Tailscale VPN =~ ^(#)?[a-zA-Z] ]] + echo '# Tailscale VPN' + read -r line + [[ #preauthkey=tskey-xxxxxxxxxxxxxxxxx =~ ^(#)?[a-zA-Z] ]] + parsed='#preauthkey=tskey-xxxxxxxxxxxxxxxxx' + [[ #preauthkey=tskey-xxxxxxxxxxxxxxxxx =~ ^#[a-zA-Z] ]] + parsed=preauthkey=tskey-xxxxxxxxxxxxxxxxx ++ echo preauthkey=tskey-xxxxxxxxxxxxxxxxx ++ cut -d= -f1 + param=preauthkey + [[ -v preauthkey ]] + echo '#preauthkey=tskey-xxxxxxxxxxxxxxxxx' + eval preauthkey=tskey-xxxxxxxxxxxxxxxxx ++ preauthkey=tskey-xxxxxxxxxxxxxxxxx + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # Custom log files =~ ^(#)?[a-zA-Z] ]] + echo '# Custom log files' + read -r line + [[ #custom_log_files=("/var/log/foo.log" "/var/log/bar.log") =~ ^(#)?[a-zA-Z] ]] + parsed='#custom_log_files=("/var/log/foo.log" "/var/log/bar.log")' + [[ #custom_log_files=("/var/log/foo.log" "/var/log/bar.log") =~ ^#[a-zA-Z] ]] + parsed='custom_log_files=("/var/log/foo.log" "/var/log/bar.log")' ++ echo 'custom_log_files=("/var/log/foo.log" "/var/log/bar.log")' ++ cut -d= -f1 + param=custom_log_files + [[ -v custom_log_files ]] + echo '#custom_log_files=("/var/log/foo.log" "/var/log/bar.log")' + eval 'custom_log_files=("/var/log/foo.log" "/var/log/bar.log")' ++ custom_log_files=("/var/log/foo.log" "/var/log/bar.log") + read -r line + [[ '' =~ ^(#)?[a-zA-Z] ]] + echo '' + read -r line + [[ # vim: filetype=sh =~ ^(#)?[a-zA-Z] ]] + echo '# vim: filetype=sh' + read -r line + set_cpu_speed + is_raspios + [[ debian == \r\a\s\p\i\o\s ]] + is_raspbian + [[ debian == \r\a\s\p\b\i\a\n ]] ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspbian ]] + return 1 ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspberry Pi OS ]] + [[ -f /boot/issue.txt ]] + return 1 + return 0 + config_ipv6 + local aptConf=/etc/apt/apt.conf.d/S90force-ipv4 + local sysctlConf=/etc/sysctl.d/99-sysctl.conf + [[ enable == \d\i\s\a\b\l\e ]] + [[ enable == \e\n\a\b\l\e ]] + grep -qs '^[[:space:]]*# Disable all IPv6 functionality' /etc/sysctl.d/99-sysctl.conf + [[ -n 1 ]] + export DEBIAN_FRONTEND=noninteractive + DEBIAN_FRONTEND=noninteractive + wait_for_apt_to_finish_update ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:30_CEST [openHABian] Updating Linux package information... ' 2021-09-26_15:02:30_CEST [openHABian] Updating Linux package information... + [[ -z '' ]] + apt_update + PID_APT=437 + tail --pid=437 -f /dev/null + apt-get update + echo OK OK + load_create_config + local 'questionText=\nWelcome to openHABian!\n\nPlease provide the name of your Linux user i.e. the account you normally log in with.\n\nTypical user names are '\''pi'\'' or '\''ubuntu'\''.' + local input + [[ -f /etc/openhabian.conf ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:32_CEST [openHABian] Loading configuration file '\''/etc/openhabian.conf'\''... ' 2021-09-26_15:02:32_CEST [openHABian] Loading configuration file '/etc/openhabian.conf'... ++ getent group openhabian + [[ ! -n '' ]] + create_user_and_group + local userName=openhabian ++ id -u openhabian + [[ -n '' ]] + cond_redirect adduser --quiet --disabled-password --gecos 'openHABian,,,,openHAB admin user' --shell /bin/bash --home /home/openhabian openhabian + [[ -n '' ]] + echo -e '\n\033[90;01m$ adduser --quiet --disabled-password --gecos openHABian,,,,openHAB admin user --shell /bin/bash --home /home/openhabian openhabian \033[39;49;00m' $ adduser --quiet --disabled-password --gecos openHABian,,,,openHAB admin user --shell /bin/bash --home /home/openhabian openhabian  + adduser --quiet --disabled-password --gecos 'openHABian,,,,openHAB admin user' --shell /bin/bash --home /home/openhabian openhabian + return 0 + echo openhabian:openhabian + chpasswd + cond_redirect usermod --append --groups openhab,sudo openhabian + source /etc/openhabian.conf ++ hostname=openhabian2 ++ username=openhabian ++ userpw=openhabian ++ adminkeyurl= ++ timezone=Europe/Berlin ++ locales='en_US.UTF-8 de_DE.UTF-8' ++ system_default_locale=en_US.UTF-8 ++ wifi_ssid= ++ wifi_password= ++ wifi_country= ++ ipv6=enable ++ repositoryurl=https://github.com/openhab/openhabian.git ++ clonebranch=openHAB3 ++ debugmode=maximum ++ hwarch=amd64 ++ osrelease=debian ++ java_opt=Zulu11-64 ++ frontailtheme=light ++ zraminstall=disable ++ hotspot=enable ++ storageconfig=openhab-dir ++ storagedir=/storage ++ storagetapes=15 ++ storagecapacity=1024 + echo OK OK + change_swapsize + is_pi + is_pifour + [[ pi4 == \p\i\4 ]] + return 0 + return 0 + local free + local minFree + local swap + local totalMemory ++ awk '/MemTotal/ {print $2}' /proc/meminfo + totalMemory=4194304 + [[ -z 4194304 ]] + swap=8388608 + minFree=16777216 ++ df -hk / ++ awk '/dev/ { print $4 }' + free=37968524 + [[ 37968524 -ge 16777216 ]] + size=8388608 + (( size/=1024 )) ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:33_CEST [openHABian] Adjusting swap size to 8192 MB... ' 2021-09-26_15:02:33_CEST [openHABian] Adjusting swap size to 8192 MB... + cond_redirect dphys-swapfile swapoff + [[ -n '' ]] + echo -e '\n\033[90;01m$ dphys-swapfile swapoff \033[39;49;00m' $ dphys-swapfile swapoff  + dphys-swapfile swapoff /opt/openhabian/functions/helpers.bash: Zeile 31: dphys-swapfile: Kommando nicht gefunden. + return 127 + echo 'FAILED (swapoff)' FAILED (swapoff) + return 1 + timezone_setting + [[ -n '' ]] + [[ -n Europe/Berlin ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:33_CEST [openHABian] Setting timezone based on openhabian.conf... ' 2021-09-26_15:02:33_CEST [openHABian] Setting timezone based on openhabian.conf... + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + running_on_github + [[ -n '' ]] + return 1 + cond_redirect timedatectl set-timezone Europe/Berlin + [[ -n '' ]] + echo -e '\n\033[90;01m$ timedatectl set-timezone Europe/Berlin \033[39;49;00m' $ timedatectl set-timezone Europe/Berlin  + timedatectl set-timezone Europe/Berlin + return 0 ++ cat /etc/timezone + echo 'OK (Europe/Berlin)' OK (Europe/Berlin) + setup_ntp enable + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + is_raspios + [[ debian == \r\a\s\p\i\o\s ]] + is_raspbian + [[ debian == \r\a\s\p\b\i\a\n ]] ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspbian ]] + return 1 ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspberry Pi OS ]] + [[ -f /boot/issue.txt ]] + return 1 + is_raspbian + [[ debian == \r\a\s\p\b\i\a\n ]] ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspbian ]] + return 1 ++ timestamp ++ date +%F_%T_%Z + echo '2021-09-26_15:02:33_CEST [openHABian] Enabling time synchronization using NTP... SKIPPED' 2021-09-26_15:02:33_CEST [openHABian] Enabling time synchronization using NTP... SKIPPED + return 0 + locale_setting + local locale + dpkg -s locales + [[ -n '' ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:33_CEST [openHABian] Setting locale based on openhabian.conf... ' 2021-09-26_15:02:33_CEST [openHABian] Setting locale based on openhabian.conf... + is_ubuntu + [[ debian == \u\b\u\n\t\u ]] ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Ubuntu ]] + return 1 + for loc in $locales + sed -i '/^#[[:space:]]en_US.UTF-8/s/^#[[:space:]]//' /etc/locale.gen + for loc in $locales + sed -i '/^#[[:space:]]de_DE.UTF-8/s/^#[[:space:]]//' /etc/locale.gen + cond_redirect locale-gen + [[ -n '' ]] + echo -e '\n\033[90;01m$ locale-gen \033[39;49;00m' $ locale-gen  + locale-gen Generating locales (this might take a while)... de_DE.UTF-8... done en_US.UTF-8... done Generation complete. + return 0 + cond_redirect dpkg-reconfigure --frontend=noninteractive locales + [[ -n '' ]] + echo -e '\n\033[90;01m$ dpkg-reconfigure --frontend=noninteractive locales \033[39;49;00m' $ dpkg-reconfigure --frontend=noninteractive locales  + dpkg-reconfigure --frontend=noninteractive locales Generating locales (this might take a while)... de_DE.UTF-8... done en_US.UTF-8... done Generation complete. + return 0 ++ grep '^[[:space:]]*LANG=' /etc/default/locale ++ sed 's|LANG=||g' + locale=de_DE.UTF-8 + cond_redirect update-locale LANG=de_DE.UTF-8 LC_ALL=de_DE.UTF-8 LC_CTYPE=de_DE.UTF-8 LANGUAGE=de_DE.UTF-8 + [[ -n '' ]] + echo -e '\n\033[90;01m$ update-locale LANG=de_DE.UTF-8 LC_ALL=de_DE.UTF-8 LC_CTYPE=de_DE.UTF-8 LANGUAGE=de_DE.UTF-8 \033[39;49;00m' $ update-locale LANG=de_DE.UTF-8 LC_ALL=de_DE.UTF-8 LC_CTYPE=de_DE.UTF-8 LANGUAGE=de_DE.UTF-8  + update-locale LANG=de_DE.UTF-8 LC_ALL=de_DE.UTF-8 LC_CTYPE=de_DE.UTF-8 LANGUAGE=de_DE.UTF-8 + return 0 + echo 'OK (reboot required)' OK (reboot required) + [[ -n '' ]] + hostname_change + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + local newHostname + [[ -n '' ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:44_CEST [openHABian] Setting hostname of the base system based on openhabian.conf... ' 2021-09-26_15:02:44_CEST [openHABian] Setting hostname of the base system based on openhabian.conf... + newHostname=openhabian2 + cond_redirect hostnamectl set-hostname openhabian2 + [[ -n '' ]] + echo -e '\n\033[90;01m$ hostnamectl set-hostname openhabian2 \033[39;49;00m' $ hostnamectl set-hostname openhabian2  + hostnamectl set-hostname openhabian2 + return 0 + sed -i 's|127.0.1.1.*$|127.0.1.1 openhabian2|g' /etc/hosts + echo OK OK + [[ -n '' ]] + memory_split + is_pi + is_pifour + [[ pi4 == \p\i\4 ]] + return 0 + return 0 ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:45_CEST [openHABian] Setting the GPU memory split down to 16MB for headless system... ' 2021-09-26_15:02:45_CEST [openHABian] Setting the GPU memory split down to 16MB for headless system... + grep -qs '^[[:space:]]*gpu_mem' /boot/config.txt + echo gpu_mem=16 + echo OK OK + enable_rpi_audio + is_pi + is_pifour + [[ pi4 == \p\i\4 ]] + return 0 + return 0 ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:45_CEST [openHABian] Enabling Audio output... ' 2021-09-26_15:02:45_CEST [openHABian] Enabling Audio output... + grep -qs '^[[:space:]]*dtparam=audio' /boot/config.txt + echo dtparam=audio=on + cond_redirect adduser openhabian audio + [[ -n '' ]] + echo -e '\n\033[90;01m$ adduser openhabian audio \033[39;49;00m' $ adduser openhabian audio  + adduser openhabian audio Füge Benutzer »openhabian« der Gruppe »audio« hinzu ... Benutzer openhabian wird zur Gruppe audio hinzugefügt. Fertig. + return 0 + echo OK OK + basic_packages ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:02:45_CEST [openHABian] Installing basic can'\''t-be-wrong packages (screen, vim, ...)... ' 2021-09-26_15:02:45_CEST [openHABian] Installing basic can't-be-wrong packages (screen, vim, ...)... ++ command -v raspi-config + [[ -x '' ]] + cond_redirect apt-get install --yes screen vim nano mc vfu bash-completion htop curl wget multitail git util-linux bzip2 zip unzip xz-utils cpufrequtils software-properties-common man-db whiptail acl usbutils dirmngr arping + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes screen vim nano mc vfu bash-completion htop curl wget multitail git util-linux bzip2 zip unzip xz-utils cpufrequtils software-properties-common man-db whiptail acl usbutils dirmngr arping \033[39;49;00m' $ apt-get install --yes screen vim nano mc vfu bash-completion htop curl wget multitail git util-linux bzip2 zip unzip xz-utils cpufrequtils software-properties-common man-db whiptail acl usbutils dirmngr arping  + apt-get install --yes screen vim nano mc vfu bash-completion htop curl wget multitail git util-linux bzip2 zip unzip xz-utils cpufrequtils software-properties-common man-db whiptail acl usbutils dirmngr arping Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 30% Statusinformationen werden eingelesen… Fertig bash-completion ist schon die neueste Version (1:2.11-2). bzip2 ist schon die neueste Version (1.0.8-4). git ist schon die neueste Version (1:2.30.2-1). man-db ist schon die neueste Version (2.9.4-2). nano ist schon die neueste Version (5.4-2). whiptail ist schon die neueste Version (0.52.21-4+b3). util-linux ist schon die neueste Version (2.36.1-8). wget ist schon die neueste Version (1.21-1+b1). xz-utils ist schon die neueste Version (5.2.5-2). Die folgenden zusätzlichen Pakete werden installiert: gir1.2-glib-2.0 gir1.2-packagekitglib-1.0 gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm iso-codes libappstream4 libassuan0 libcpufreq0 libcurl4 libdw1 libgirepository-1.0-1 libglib2.0-0 libglib2.0-bin libglib2.0-data libgpm2 libgstreamer1.0-0 libksba8 libnet1 libnl-3-200 libnl-genl-3-200 libnpth0 libpackagekit-glib2-18 libpcap0.8 libpolkit-agent-1-0 libpolkit-gobject-1-0 libstemmer0d libunwind8 libusb-1.0-0 libutempter0 libyaml-0-2 lsb-release mc-data packagekit packagekit-tools pinentry-curses policykit-1 python3-dbus python3-distro-info python3-gi python3-software-properties shared-mime-info unattended-upgrades vim-runtime xdg-user-dirs Vorgeschlagene Pakete: dbus-user-session pinentry-gnome3 tor parcimonie xloadimage scdaemon lm-sensors strace isoquery gpm gstreamer1.0-tools arj catdvi | texlive-binaries dbview djvulibre-bin epub-utils genisoimage gv imagemagick libaspell-dev links | w3m | lynx odt2txt poppler-utils python python-boto python-tz unar wimtools xpdf | pdf-viewer appstream pinentry-doc python-dbus-doc python3-dbus-dbg byobu | screenie | iselect bsd-mailx needrestart powermgmt-base ctags vim-doc vim-scripts Die folgenden NEUEN Pakete werden installiert: acl arping cpufrequtils curl dirmngr gir1.2-glib-2.0 gir1.2-packagekitglib-1.0 gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm htop iso-codes libappstream4 libassuan0 libcpufreq0 libcurl4 libdw1 libgirepository-1.0-1 libglib2.0-0 libglib2.0-bin libglib2.0-data libgpm2 libgstreamer1.0-0 libksba8 libnet1 libnl-3-200 libnl-genl-3-200 libnpth0 libpackagekit-glib2-18 libpcap0.8 libpolkit-agent-1-0 libpolkit-gobject-1-0 libstemmer0d libunwind8 libusb-1.0-0 libutempter0 libyaml-0-2 lsb-release mc mc-data multitail packagekit packagekit-tools pinentry-curses policykit-1 python3-dbus python3-distro-info python3-gi python3-software-properties screen shared-mime-info software-properties-common unattended-upgrades unzip usbutils vfu vim vim-runtime xdg-user-dirs zip 0 aktualisiert, 66 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 30,9 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 121 MB Plattenplatz zusätzlich benutzt. 0% [Wird verarbeitet] Holen:1 http://ftp.debian.org/debian bullseye/main amd64 libcpufreq0 amd64 008-2 [14,1 kB] 0% [1 libcpufreq0 13,2 kB/14,1 kB 94%] 0% [Wird verarbeitet] Holen:2 http://ftp.debian.org/debian bullseye/main amd64 cpufrequtils amd64 008-2 [36,6 kB] 0% [2 cpufrequtils 944 B/36,6 kB 3%] 1% [Warten auf Kopfzeilen] Holen:3 http://ftp.debian.org/debian bullseye/main amd64 acl amd64 2.2.53-10 [60,6 kB] 1% [3 acl 4.298 B/60,6 kB 7%] 1% [Warten auf Kopfzeilen] Holen:4 http://ftp.debian.org/debian bullseye/main amd64 libnet1 amd64 1.1.6+dfsg-3.1 [60,4 kB] 1% [4 libnet1 9.964 B/60,4 kB 16%] 2% [Warten auf Kopfzeilen] Holen:5 http://ftp.debian.org/debian bullseye/main amd64 libpcap0.8 amd64 1.10.0-2 [159 kB] 2% [5 libpcap0.8 4.624 B/159 kB 3%] 2% [Warten auf Kopfzeilen] Holen:6 http://ftp.debian.org/debian bullseye/main amd64 arping amd64 2.21-2 [31,6 kB] 2% [6 arping 5.542 B/31,6 kB 18%] 3% [Warten auf Kopfzeilen] Holen:7 http://ftp.debian.org/debian bullseye/main amd64 libcurl4 amd64 7.74.0-1.3+b1 [341 kB] 3% [7 libcurl4 1.626 B/341 kB 0%] 4% [Warten auf Kopfzeilen] Holen:8 http://ftp.debian.org/debian bullseye/main amd64 curl amd64 7.74.0-1.3+b1 [267 kB] 4% [8 curl 4.290 B/267 kB 2%] 5% [Warten auf Kopfzeilen] Holen:9 http://ftp.debian.org/debian bullseye/main amd64 libassuan0 amd64 2.5.3-7.1 [50,5 kB] 5% [9 libassuan0 3.584 B/50,5 kB 7%] 5% [Wird verarbeitet] Holen:10 http://ftp.debian.org/debian bullseye/main amd64 gpgconf amd64 2.2.27-2 [547 kB] 5% [10 gpgconf 5.317 B/547 kB 1%] 7% [Warten auf Kopfzeilen] Holen:11 http://ftp.debian.org/debian bullseye/main amd64 libksba8 amd64 1.5.0-3 [123 kB] 7% [11 libksba8 4.109 B/123 kB 3%] 8% [Warten auf Kopfzeilen] Holen:12 http://ftp.debian.org/debian bullseye/main amd64 libnpth0 amd64 1.6-3 [19,0 kB] 8% [12 libnpth0 6.359 B/19,0 kB 34%] 8% [Warten auf Kopfzeilen] Holen:13 http://ftp.debian.org/debian bullseye/main amd64 dirmngr amd64 2.2.27-2 [762 kB] 8% [13 dirmngr 1.815 B/762 kB 0%] 10% [Warten auf Kopfzeilen] Holen:14 http://ftp.debian.org/debian bullseye/main amd64 libglib2.0-0 amd64 2.66.8-1 [1.370 kB] 10% [14 libglib2.0-0 3.377 B/1.370 kB 0%] 14% [Wird verarbeitet] Holen:15 http://ftp.debian.org/debian bullseye/main amd64 libgirepository-1.0-1 amd64 1.66.1-1+b1 [96,7 kB] 14% [15 libgirepository-1.0-1 5.767 B/96,7 kB 6%] 15% [Warten auf Kopfzeilen] Holen:16 http://ftp.debian.org/debian bullseye/main amd64 gir1.2-glib-2.0 amd64 1.66.1-1+b1 [151 kB] 15% [16 gir1.2-glib-2.0 1.811 B/151 kB 1%] 15% [Warten auf Kopfzeilen] Holen:17 http://ftp.debian.org/debian bullseye/main amd64 libpackagekit-glib2-18 amd64 1.2.2-2 [124 kB] 15% [17 libpackagekit-glib2-18 2.264 B/124 kB 2%] 16% [Warten auf Kopfzeilen] Holen:18 http://ftp.debian.org/debian bullseye/main amd64 gir1.2-packagekitglib-1.0 amd64 1.2.2-2 [36,8 kB] 16% [18 gir1.2-packagekitglib-1.0 2.787 B/36,8 kB 8%] 16% [Warten auf Kopfzeilen] Holen:19 http://ftp.debian.org/debian bullseye/main amd64 gnupg-l10n all 2.2.27-2 [1.084 kB] 16% [19 gnupg-l10n 2.157 B/1.084 kB 0%] 20% [Warten auf Kopfzeilen] Holen:20 http://ftp.debian.org/debian bullseye/main amd64 gnupg-utils amd64 2.2.27-2 [905 kB] 20% [20 gnupg-utils 3.065 B/905 kB 0%] 22% [Warten auf Kopfzeilen] Holen:21 http://ftp.debian.org/debian bullseye/main amd64 gpg amd64 2.2.27-2 [927 kB] 22% [21 gpg 5.848 B/927 kB 1%] 25% [Warten auf Kopfzeilen] Holen:22 http://ftp.debian.org/debian bullseye/main amd64 pinentry-curses amd64 1.1.0-4 [64,9 kB] 25% [22 pinentry-curses 3.786 B/64,9 kB 6%] 25% [Wird verarbeitet] Holen:23 http://ftp.debian.org/debian bullseye/main amd64 gpg-agent amd64 2.2.27-2 [669 kB] 25% [23 gpg-agent 4.096 B/669 kB 1%] 27% [Warten auf Kopfzeilen] Holen:24 http://ftp.debian.org/debian bullseye/main amd64 gpg-wks-client amd64 2.2.27-2 [523 kB] 27% [24 gpg-wks-client 5.622 B/523 kB 1%] 29% [Wird verarbeitet] Holen:25 http://ftp.debian.org/debian bullseye/main amd64 gpg-wks-server amd64 2.2.27-2 [516 kB] 29% [25 gpg-wks-server 0 B/516 kB 0%] 31% [Warten auf Kopfzeilen] Holen:26 http://ftp.debian.org/debian bullseye/main amd64 gpgsm amd64 2.2.27-2 [645 kB] 31% [26 gpgsm 1.466 B/645 kB 0%] 33% [Wird verarbeitet] Holen:27 http://ftp.debian.org/debian bullseye/main amd64 gnupg all 2.2.27-2 [825 kB] 33% [27 gnupg 5.147 B/825 kB 1%] 35% [Wird verarbeitet] Holen:28 http://ftp.debian.org/debian bullseye/main amd64 libnl-3-200 amd64 3.4.0-1+b1 [63,6 kB] 35% [28 libnl-3-200 5.573 B/63,6 kB 9%] 36% [Wird verarbeitet] Holen:29 http://ftp.debian.org/debian bullseye/main amd64 libnl-genl-3-200 amd64 3.4.0-1+b1 [21,2 kB] 36% [29 libnl-genl-3-200 4.552 B/21,2 kB 22%] 36% [Warten auf Kopfzeilen] Holen:30 http://ftp.debian.org/debian bullseye/main amd64 htop amd64 3.0.5-7 [127 kB] 36% [30 htop 2.540 B/127 kB 2%] 37% [Wird verarbeitet] Holen:31 http://ftp.debian.org/debian bullseye/main amd64 iso-codes all 4.6.0-1 [2.824 kB] 37% [31 iso-codes 2.714 B/2.824 kB 0%] 44% [Wird verarbeitet] Holen:32 http://ftp.debian.org/debian bullseye/main amd64 libstemmer0d amd64 2.1.0-1 [119 kB] 44% [32 libstemmer0d 9.438 B/119 kB 8%] 45% [Wird verarbeitet] Holen:33 http://ftp.debian.org/debian bullseye/main amd64 libyaml-0-2 amd64 0.2.2-1 [49,6 kB] 45% [33 libyaml-0-2 2.828 B/49,6 kB 6%] 45% [Warten auf Kopfzeilen] Holen:34 http://ftp.debian.org/debian bullseye/main amd64 libappstream4 amd64 0.14.4-1 [172 kB] 45% [34 libappstream4 4.520 B/172 kB 3%] 46% [Warten auf Kopfzeilen] Holen:35 http://ftp.debian.org/debian bullseye/main amd64 libdw1 amd64 0.183-1 [234 kB] 46% [35 libdw1 749 B/234 kB 0%] 47% [Warten auf Kopfzeilen] Holen:36 http://ftp.debian.org/debian bullseye/main amd64 libglib2.0-data all 2.66.8-1 [1.164 kB] 47% [36 libglib2.0-data 2.295 B/1.164 kB 0%] 50% [Warten auf Kopfzeilen] Holen:37 http://ftp.debian.org/debian bullseye/main amd64 libglib2.0-bin amd64 2.66.8-1 [141 kB] 50% [37 libglib2.0-bin 5.391 B/141 kB 4%] 51% [Warten auf Kopfzeilen] Holen:38 http://ftp.debian.org/debian bullseye/main amd64 libgpm2 amd64 1.20.7-8 [35,6 kB] 51% [38 libgpm2 3.809 B/35,6 kB 11%] 51% [Warten auf Kopfzeilen] Holen:39 http://ftp.debian.org/debian bullseye/main amd64 libunwind8 amd64 1.3.2-2 [54,5 kB] 51% [39 libunwind8 1.531 B/54,5 kB 3%] 52% [Warten auf Kopfzeilen] Holen:40 http://ftp.debian.org/debian bullseye/main amd64 libgstreamer1.0-0 amd64 1.18.4-2.1 [2.230 kB] 52% [40 libgstreamer1.0-0 3.049 B/2.230 kB 0%] 58% [Warten auf Kopfzeilen] Holen:41 http://ftp.debian.org/debian bullseye/main amd64 libpolkit-gobject-1-0 amd64 0.105-31 [48,5 kB] 58% [41 libpolkit-gobject-1-0 6.239 B/48,5 kB 13%] 58% [Warten auf Kopfzeilen] Holen:42 http://ftp.debian.org/debian bullseye/main amd64 libpolkit-agent-1-0 amd64 0.105-31 [28,1 kB] 58% [42 libpolkit-agent-1-0 542 B/28,1 kB 2%] 59% [Warten auf Kopfzeilen] Holen:43 http://ftp.debian.org/debian bullseye/main amd64 libusb-1.0-0 amd64 2:1.0.24-3 [60,2 kB] 59% [43 libusb-1.0-0 1.084 B/60,2 kB 2%] 59% [Warten auf Kopfzeilen] Holen:44 http://ftp.debian.org/debian bullseye/main amd64 libutempter0 amd64 1.2.1-2 [8.960 B] 59% [44 libutempter0 2.547 B/8.960 B 28%] 59% [Warten auf Kopfzeilen] Holen:45 http://ftp.debian.org/debian bullseye/main amd64 lsb-release all 11.1.0 [27,9 kB] 59% [45 lsb-release 2.361 B/27,9 kB 8%] 60% [Wird verarbeitet] Holen:46 http://ftp.debian.org/debian bullseye/main amd64 mc-data all 3:4.8.26-1.1 [1.346 kB] 60% [46 mc-data 2.128 B/1.346 kB 0%] 64% [Wird verarbeitet] Holen:47 http://ftp.debian.org/debian bullseye/main amd64 mc amd64 3:4.8.26-1.1 [534 kB] 64% [47 mc 6.776 B/534 kB 1%] 65% [Warten auf Kopfzeilen] Holen:48 http://ftp.debian.org/debian bullseye/main amd64 multitail amd64 6.5.0-3 [130 kB] 65% [48 multitail 2.616 B/130 kB 2%] 66% [Warten auf Kopfzeilen] Holen:49 http://ftp.debian.org/debian bullseye/main amd64 policykit-1 amd64 0.105-31 [96,6 kB] 66% [49 policykit-1 3.361 B/96,6 kB 3%] 66% [Warten auf Kopfzeilen] Holen:50 http://ftp.debian.org/debian bullseye/main amd64 packagekit amd64 1.2.2-2 [598 kB] 66% [50 packagekit 533 B/598 kB 0%] 68% [Wird verarbeitet] Holen:51 http://ftp.debian.org/debian bullseye/main amd64 packagekit-tools amd64 1.2.2-2 [41,7 kB] 68% [51 packagekit-tools 1.187 B/41,7 kB 3%] 69% [Warten auf Kopfzeilen] Holen:52 http://ftp.debian.org/debian bullseye/main amd64 python3-dbus amd64 1.2.16-5 [108 kB] 69% [52 python3-dbus 2.239 B/108 kB 2%] 69% [Warten auf Kopfzeilen] Holen:53 http://ftp.debian.org/debian bullseye/main amd64 python3-distro-info all 1.0 [8.720 B] 69% [53 python3-distro-info 702 B/8.720 B 8%] 70% [Wird verarbeitet] Holen:54 http://ftp.debian.org/debian bullseye/main amd64 python3-gi amd64 3.38.0-2 [232 kB] 70% [54 python3-gi 754 B/232 kB 0%] 71% [Warten auf Kopfzeilen] Holen:55 http://ftp.debian.org/debian bullseye/main amd64 python3-software-properties all 0.96.20.2-2.1 [49,7 kB] 71% [55 python3-software-properties 4.608 B/49,7 kB 9%] 71% [Warten auf Kopfzeilen] Holen:56 http://ftp.debian.org/debian bullseye/main amd64 screen amd64 4.8.0-6 [609 kB] 71% [56 screen 2.832 B/609 kB 0%] 73% [Wird verarbeitet] Holen:57 http://ftp.debian.org/debian bullseye/main amd64 shared-mime-info amd64 2.0-1 [701 kB] 73% [57 shared-mime-info 0 B/701 kB 0%] 75% [Wird verarbeitet] Holen:58 http://ftp.debian.org/debian bullseye/main amd64 software-properties-common all 0.96.20.2-2.1 [83,4 kB] 75% [58 software-properties-common 5.675 B/83,4 kB 7%] 75% [Wird verarbeitet] Holen:59 http://ftp.debian.org/debian bullseye/main amd64 unattended-upgrades all 2.8 [88,6 kB] 76% [59 unattended-upgrades 2.832 B/88,6 kB 3%] 76% [Warten auf Kopfzeilen] Holen:60 http://ftp.debian.org/debian bullseye/main amd64 unzip amd64 6.0-26 [171 kB] 76% [60 unzip 1.364 B/171 kB 1%] 77% [Warten auf Kopfzeilen] Holen:61 http://ftp.debian.org/debian bullseye/main amd64 usbutils amd64 1:013-3 [79,3 kB] 77% [61 usbutils 3.037 B/79,3 kB 4%] 77% [Warten auf Kopfzeilen] Holen:62 http://ftp.debian.org/debian bullseye/main amd64 vfu amd64 4.21-1 [178 kB] 77% [62 vfu 8.974 B/178 kB 5%] 78% [Warten auf Kopfzeilen] Holen:63 http://ftp.debian.org/debian bullseye/main amd64 vim-runtime all 2:8.2.2434-3 [6.226 kB] 78% [63 vim-runtime 22,0 kB/6.226 kB 0%] 89% [63 vim-runtime 4.350 kB/6.226 kB 70%] 94% [Warten auf Kopfzeilen] Holen:64 http://ftp.debian.org/debian bullseye/main amd64 vim amd64 2:8.2.2434-3 [1.494 kB] 95% [64 vim 13,5 kB/1.494 kB 1%] 99% [Warten auf Kopfzeilen] Holen:65 http://ftp.debian.org/debian bullseye/main amd64 xdg-user-dirs amd64 0.17-2 [53,8 kB] 99% [65 xdg-user-dirs 3.013 B/53,8 kB 6%] 99% [Wird verarbeitet] Holen:66 http://ftp.debian.org/debian bullseye/main amd64 zip amd64 3.0-12 [232 kB] 99% [66 zip 4.253 B/232 kB 2%] 100% [Wird verarbeitet] Es wurden 30,9 MB in 5 s geholt (6.266 kB/s). Extrahiere Vorlagen aus Paketen: 45% Extrahiere Vorlagen aus Paketen: 90% Extrahiere Vorlagen aus Paketen: 100% Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket libcpufreq0 wird gewählt. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 21290 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../00-libcpufreq0_008-2_amd64.deb ... Entpacken von libcpufreq0 (008-2) ... Vormals nicht ausgewähltes Paket cpufrequtils wird gewählt. Vorbereitung zum Entpacken von .../01-cpufrequtils_008-2_amd64.deb ... Entpacken von cpufrequtils (008-2) ... Vormals nicht ausgewähltes Paket acl wird gewählt. Vorbereitung zum Entpacken von .../02-acl_2.2.53-10_amd64.deb ... Entpacken von acl (2.2.53-10) ... Vormals nicht ausgewähltes Paket libnet1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../03-libnet1_1.1.6+dfsg-3.1_amd64.deb ... Entpacken von libnet1:amd64 (1.1.6+dfsg-3.1) ... Vormals nicht ausgewähltes Paket libpcap0.8:amd64 wird gewählt. Vorbereitung zum Entpacken von .../04-libpcap0.8_1.10.0-2_amd64.deb ... Entpacken von libpcap0.8:amd64 (1.10.0-2) ... Vormals nicht ausgewähltes Paket arping wird gewählt. Vorbereitung zum Entpacken von .../05-arping_2.21-2_amd64.deb ... Entpacken von arping (2.21-2) ... Vormals nicht ausgewähltes Paket libcurl4:amd64 wird gewählt. Vorbereitung zum Entpacken von .../06-libcurl4_7.74.0-1.3+b1_amd64.deb ... Entpacken von libcurl4:amd64 (7.74.0-1.3+b1) ... Vormals nicht ausgewähltes Paket curl wird gewählt. Vorbereitung zum Entpacken von .../07-curl_7.74.0-1.3+b1_amd64.deb ... Entpacken von curl (7.74.0-1.3+b1) ... Vormals nicht ausgewähltes Paket libassuan0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../08-libassuan0_2.5.3-7.1_amd64.deb ... Entpacken von libassuan0:amd64 (2.5.3-7.1) ... Vormals nicht ausgewähltes Paket gpgconf wird gewählt. Vorbereitung zum Entpacken von .../09-gpgconf_2.2.27-2_amd64.deb ... Entpacken von gpgconf (2.2.27-2) ... Vormals nicht ausgewähltes Paket libksba8:amd64 wird gewählt. Vorbereitung zum Entpacken von .../10-libksba8_1.5.0-3_amd64.deb ... Entpacken von libksba8:amd64 (1.5.0-3) ... Vormals nicht ausgewähltes Paket libnpth0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../11-libnpth0_1.6-3_amd64.deb ... Entpacken von libnpth0:amd64 (1.6-3) ... Vormals nicht ausgewähltes Paket dirmngr wird gewählt. Vorbereitung zum Entpacken von .../12-dirmngr_2.2.27-2_amd64.deb ... Entpacken von dirmngr (2.2.27-2) ... Vormals nicht ausgewähltes Paket libglib2.0-0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../13-libglib2.0-0_2.66.8-1_amd64.deb ... Entpacken von libglib2.0-0:amd64 (2.66.8-1) ... Vormals nicht ausgewähltes Paket libgirepository-1.0-1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../14-libgirepository-1.0-1_1.66.1-1+b1_amd64.deb ... Entpacken von libgirepository-1.0-1:amd64 (1.66.1-1+b1) ... Vormals nicht ausgewähltes Paket gir1.2-glib-2.0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../15-gir1.2-glib-2.0_1.66.1-1+b1_amd64.deb ... Entpacken von gir1.2-glib-2.0:amd64 (1.66.1-1+b1) ... Vormals nicht ausgewähltes Paket libpackagekit-glib2-18:amd64 wird gewählt. Vorbereitung zum Entpacken von .../16-libpackagekit-glib2-18_1.2.2-2_amd64.deb ... Entpacken von libpackagekit-glib2-18:amd64 (1.2.2-2) ... Vormals nicht ausgewähltes Paket gir1.2-packagekitglib-1.0 wird gewählt. Vorbereitung zum Entpacken von .../17-gir1.2-packagekitglib-1.0_1.2.2-2_amd64.deb ... Entpacken von gir1.2-packagekitglib-1.0 (1.2.2-2) ... Vormals nicht ausgewähltes Paket gnupg-l10n wird gewählt. Vorbereitung zum Entpacken von .../18-gnupg-l10n_2.2.27-2_all.deb ... Entpacken von gnupg-l10n (2.2.27-2) ... Vormals nicht ausgewähltes Paket gnupg-utils wird gewählt. Vorbereitung zum Entpacken von .../19-gnupg-utils_2.2.27-2_amd64.deb ... Entpacken von gnupg-utils (2.2.27-2) ... Vormals nicht ausgewähltes Paket gpg wird gewählt. Vorbereitung zum Entpacken von .../20-gpg_2.2.27-2_amd64.deb ... Entpacken von gpg (2.2.27-2) ... Vormals nicht ausgewähltes Paket pinentry-curses wird gewählt. Vorbereitung zum Entpacken von .../21-pinentry-curses_1.1.0-4_amd64.deb ... Entpacken von pinentry-curses (1.1.0-4) ... Vormals nicht ausgewähltes Paket gpg-agent wird gewählt. Vorbereitung zum Entpacken von .../22-gpg-agent_2.2.27-2_amd64.deb ... Entpacken von gpg-agent (2.2.27-2) ... Vormals nicht ausgewähltes Paket gpg-wks-client wird gewählt. Vorbereitung zum Entpacken von .../23-gpg-wks-client_2.2.27-2_amd64.deb ... Entpacken von gpg-wks-client (2.2.27-2) ... Vormals nicht ausgewähltes Paket gpg-wks-server wird gewählt. Vorbereitung zum Entpacken von .../24-gpg-wks-server_2.2.27-2_amd64.deb ... Entpacken von gpg-wks-server (2.2.27-2) ... Vormals nicht ausgewähltes Paket gpgsm wird gewählt. Vorbereitung zum Entpacken von .../25-gpgsm_2.2.27-2_amd64.deb ... Entpacken von gpgsm (2.2.27-2) ... Vormals nicht ausgewähltes Paket gnupg wird gewählt. Vorbereitung zum Entpacken von .../26-gnupg_2.2.27-2_all.deb ... Entpacken von gnupg (2.2.27-2) ... Vormals nicht ausgewähltes Paket libnl-3-200:amd64 wird gewählt. Vorbereitung zum Entpacken von .../27-libnl-3-200_3.4.0-1+b1_amd64.deb ... Entpacken von libnl-3-200:amd64 (3.4.0-1+b1) ... Vormals nicht ausgewähltes Paket libnl-genl-3-200:amd64 wird gewählt. Vorbereitung zum Entpacken von .../28-libnl-genl-3-200_3.4.0-1+b1_amd64.deb ... Entpacken von libnl-genl-3-200:amd64 (3.4.0-1+b1) ... Vormals nicht ausgewähltes Paket htop wird gewählt. Vorbereitung zum Entpacken von .../29-htop_3.0.5-7_amd64.deb ... Entpacken von htop (3.0.5-7) ... Vormals nicht ausgewähltes Paket iso-codes wird gewählt. Vorbereitung zum Entpacken von .../30-iso-codes_4.6.0-1_all.deb ... Entpacken von iso-codes (4.6.0-1) ... Vormals nicht ausgewähltes Paket libstemmer0d:amd64 wird gewählt. Vorbereitung zum Entpacken von .../31-libstemmer0d_2.1.0-1_amd64.deb ... Entpacken von libstemmer0d:amd64 (2.1.0-1) ... Vormals nicht ausgewähltes Paket libyaml-0-2:amd64 wird gewählt. Vorbereitung zum Entpacken von .../32-libyaml-0-2_0.2.2-1_amd64.deb ... Entpacken von libyaml-0-2:amd64 (0.2.2-1) ... Vormals nicht ausgewähltes Paket libappstream4:amd64 wird gewählt. Vorbereitung zum Entpacken von .../33-libappstream4_0.14.4-1_amd64.deb ... Entpacken von libappstream4:amd64 (0.14.4-1) ... Vormals nicht ausgewähltes Paket libdw1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../34-libdw1_0.183-1_amd64.deb ... Entpacken von libdw1:amd64 (0.183-1) ... Vormals nicht ausgewähltes Paket libglib2.0-data wird gewählt. Vorbereitung zum Entpacken von .../35-libglib2.0-data_2.66.8-1_all.deb ... Entpacken von libglib2.0-data (2.66.8-1) ... Vormals nicht ausgewähltes Paket libglib2.0-bin wird gewählt. Vorbereitung zum Entpacken von .../36-libglib2.0-bin_2.66.8-1_amd64.deb ... Entpacken von libglib2.0-bin (2.66.8-1) ... Vormals nicht ausgewähltes Paket libgpm2:amd64 wird gewählt. Vorbereitung zum Entpacken von .../37-libgpm2_1.20.7-8_amd64.deb ... Entpacken von libgpm2:amd64 (1.20.7-8) ... Vormals nicht ausgewähltes Paket libunwind8:amd64 wird gewählt. Vorbereitung zum Entpacken von .../38-libunwind8_1.3.2-2_amd64.deb ... Entpacken von libunwind8:amd64 (1.3.2-2) ... Vormals nicht ausgewähltes Paket libgstreamer1.0-0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../39-libgstreamer1.0-0_1.18.4-2.1_amd64.deb ... Entpacken von libgstreamer1.0-0:amd64 (1.18.4-2.1) ... Vormals nicht ausgewähltes Paket libpolkit-gobject-1-0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../40-libpolkit-gobject-1-0_0.105-31_amd64.deb ... Entpacken von libpolkit-gobject-1-0:amd64 (0.105-31) ... Vormals nicht ausgewähltes Paket libpolkit-agent-1-0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../41-libpolkit-agent-1-0_0.105-31_amd64.deb ... Entpacken von libpolkit-agent-1-0:amd64 (0.105-31) ... Vormals nicht ausgewähltes Paket libusb-1.0-0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../42-libusb-1.0-0_2%3a1.0.24-3_amd64.deb ... Entpacken von libusb-1.0-0:amd64 (2:1.0.24-3) ... Vormals nicht ausgewähltes Paket libutempter0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../43-libutempter0_1.2.1-2_amd64.deb ... Entpacken von libutempter0:amd64 (1.2.1-2) ... Vormals nicht ausgewähltes Paket lsb-release wird gewählt. Vorbereitung zum Entpacken von .../44-lsb-release_11.1.0_all.deb ... Entpacken von lsb-release (11.1.0) ... Vormals nicht ausgewähltes Paket mc-data wird gewählt. Vorbereitung zum Entpacken von .../45-mc-data_3%3a4.8.26-1.1_all.deb ... Entpacken von mc-data (3:4.8.26-1.1) ... Vormals nicht ausgewähltes Paket mc wird gewählt. Vorbereitung zum Entpacken von .../46-mc_3%3a4.8.26-1.1_amd64.deb ... Entpacken von mc (3:4.8.26-1.1) ... Vormals nicht ausgewähltes Paket multitail wird gewählt. Vorbereitung zum Entpacken von .../47-multitail_6.5.0-3_amd64.deb ... Entpacken von multitail (6.5.0-3) ... Vormals nicht ausgewähltes Paket policykit-1 wird gewählt. Vorbereitung zum Entpacken von .../48-policykit-1_0.105-31_amd64.deb ... Entpacken von policykit-1 (0.105-31) ... Vormals nicht ausgewähltes Paket packagekit wird gewählt. Vorbereitung zum Entpacken von .../49-packagekit_1.2.2-2_amd64.deb ... Entpacken von packagekit (1.2.2-2) ... Vormals nicht ausgewähltes Paket packagekit-tools wird gewählt. Vorbereitung zum Entpacken von .../50-packagekit-tools_1.2.2-2_amd64.deb ... Entpacken von packagekit-tools (1.2.2-2) ... Vormals nicht ausgewähltes Paket python3-dbus wird gewählt. Vorbereitung zum Entpacken von .../51-python3-dbus_1.2.16-5_amd64.deb ... Entpacken von python3-dbus (1.2.16-5) ... Vormals nicht ausgewähltes Paket python3-distro-info wird gewählt. Vorbereitung zum Entpacken von .../52-python3-distro-info_1.0_all.deb ... Entpacken von python3-distro-info (1.0) ... Vormals nicht ausgewähltes Paket python3-gi wird gewählt. Vorbereitung zum Entpacken von .../53-python3-gi_3.38.0-2_amd64.deb ... Entpacken von python3-gi (3.38.0-2) ... Vormals nicht ausgewähltes Paket python3-software-properties wird gewählt. Vorbereitung zum Entpacken von .../54-python3-software-properties_0.96.20.2-2.1_all.deb ... Entpacken von python3-software-properties (0.96.20.2-2.1) ... Vormals nicht ausgewähltes Paket screen wird gewählt. Vorbereitung zum Entpacken von .../55-screen_4.8.0-6_amd64.deb ... Entpacken von screen (4.8.0-6) ... Vormals nicht ausgewähltes Paket shared-mime-info wird gewählt. Vorbereitung zum Entpacken von .../56-shared-mime-info_2.0-1_amd64.deb ... Entpacken von shared-mime-info (2.0-1) ... Vormals nicht ausgewähltes Paket software-properties-common wird gewählt. Vorbereitung zum Entpacken von .../57-software-properties-common_0.96.20.2-2.1_all.deb ... Entpacken von software-properties-common (0.96.20.2-2.1) ... Vormals nicht ausgewähltes Paket unattended-upgrades wird gewählt. Vorbereitung zum Entpacken von .../58-unattended-upgrades_2.8_all.deb ... Entpacken von unattended-upgrades (2.8) ... Vormals nicht ausgewähltes Paket unzip wird gewählt. Vorbereitung zum Entpacken von .../59-unzip_6.0-26_amd64.deb ... Entpacken von unzip (6.0-26) ... Vormals nicht ausgewähltes Paket usbutils wird gewählt. Vorbereitung zum Entpacken von .../60-usbutils_1%3a013-3_amd64.deb ... Entpacken von usbutils (1:013-3) ... Vormals nicht ausgewähltes Paket vfu wird gewählt. Vorbereitung zum Entpacken von .../61-vfu_4.21-1_amd64.deb ... Entpacken von vfu (4.21-1) ... Vormals nicht ausgewähltes Paket vim-runtime wird gewählt. Vorbereitung zum Entpacken von .../62-vim-runtime_2%3a8.2.2434-3_all.deb ... »Umleitung von /usr/share/vim/vim82/doc/help.txt zu /usr/share/vim/vim82/doc/help.txt.vim-tiny durch vim-runtime« wird hinzugefügt »Umleitung von /usr/share/vim/vim82/doc/tags zu /usr/share/vim/vim82/doc/tags.vim-tiny durch vim-runtime« wird hinzugefügt Entpacken von vim-runtime (2:8.2.2434-3) ... Vormals nicht ausgewähltes Paket vim wird gewählt. Vorbereitung zum Entpacken von .../63-vim_2%3a8.2.2434-3_amd64.deb ... Entpacken von vim (2:8.2.2434-3) ... Vormals nicht ausgewähltes Paket xdg-user-dirs wird gewählt. Vorbereitung zum Entpacken von .../64-xdg-user-dirs_0.17-2_amd64.deb ... Entpacken von xdg-user-dirs (0.17-2) ... Vormals nicht ausgewähltes Paket zip wird gewählt. Vorbereitung zum Entpacken von .../65-zip_3.0-12_amd64.deb ... Entpacken von zip (3.0-12) ... libksba8:amd64 (1.5.0-3) wird eingerichtet ... libdw1:amd64 (0.183-1) wird eingerichtet ... libgpm2:amd64 (1.20.7-8) wird eingerichtet ... xdg-user-dirs (0.17-2) wird eingerichtet ... libyaml-0-2:amd64 (0.2.2-1) wird eingerichtet ... libglib2.0-0:amd64 (2.66.8-1) wird eingerichtet ... Keine Schema-Dateien gefunden. Es wird nichts unternommen. unzip (6.0-26) wird eingerichtet ... libpackagekit-glib2-18:amd64 (1.2.2-2) wird eingerichtet ... libnpth0:amd64 (1.6-3) wird eingerichtet ... libnet1:amd64 (1.1.6+dfsg-3.1) wird eingerichtet ... libassuan0:amd64 (2.5.3-7.1) wird eingerichtet ... libunwind8:amd64 (1.3.2-2) wird eingerichtet ... acl (2.2.53-10) wird eingerichtet ... vfu (4.21-1) wird eingerichtet ... zip (3.0-12) wird eingerichtet ... libglib2.0-data (2.66.8-1) wird eingerichtet ... libpcap0.8:amd64 (1.10.0-2) wird eingerichtet ... gnupg-l10n (2.2.27-2) wird eingerichtet ... shared-mime-info (2.0-1) wird eingerichtet ... mc-data (3:4.8.26-1.1) wird eingerichtet ... libutempter0:amd64 (1.2.1-2) wird eingerichtet ... libcpufreq0 (008-2) wird eingerichtet ... libnl-3-200:amd64 (3.4.0-1+b1) wird eingerichtet ... multitail (6.5.0-3) wird eingerichtet ... gpgconf (2.2.27-2) wird eingerichtet ... libcurl4:amd64 (7.74.0-1.3+b1) wird eingerichtet ... libgirepository-1.0-1:amd64 (1.66.1-1+b1) wird eingerichtet ... curl (7.74.0-1.3+b1) wird eingerichtet ... libusb-1.0-0:amd64 (2:1.0.24-3) wird eingerichtet ... libstemmer0d:amd64 (2.1.0-1) wird eingerichtet ... vim-runtime (2:8.2.2434-3) wird eingerichtet ... lsb-release (11.1.0) wird eingerichtet ... python3-distro-info (1.0) wird eingerichtet ... iso-codes (4.6.0-1) wird eingerichtet ... gpg (2.2.27-2) wird eingerichtet ... libpolkit-gobject-1-0:amd64 (0.105-31) wird eingerichtet ... libgstreamer1.0-0:amd64 (1.18.4-2.1) wird eingerichtet ... Setcap worked! gst-ptp-helper is not suid! gnupg-utils (2.2.27-2) wird eingerichtet ... pinentry-curses (1.1.0-4) wird eingerichtet ... python3-dbus (1.2.16-5) wird eingerichtet ... vim (2:8.2.2434-3) wird eingerichtet ... update-alternatives: /usr/bin/vim.basic wird verwendet, um /usr/bin/vim (vim) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/vim.basic wird verwendet, um /usr/bin/vimdiff (vimdiff) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/vim.basic wird verwendet, um /usr/bin/rvim (rvim) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/vim.basic wird verwendet, um /usr/bin/rview (rview) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/vim.basic wird verwendet, um /usr/bin/vi (vi) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/vim.basic wird verwendet, um /usr/bin/view (view) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/vim.basic wird verwendet, um /usr/bin/ex (ex) im automatischen Modus bereitzustellen gpg-agent (2.2.27-2) wird eingerichtet ... Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket → /usr/lib/systemd/user/gpg-agent-browser.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket → /usr/lib/systemd/user/gpg-agent-extra.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket → /usr/lib/systemd/user/gpg-agent-ssh.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent.socket → /usr/lib/systemd/user/gpg-agent.socket. arping (2.21-2) wird eingerichtet ... mc (3:4.8.26-1.1) wird eingerichtet ... gpgsm (2.2.27-2) wird eingerichtet ... libglib2.0-bin (2.66.8-1) wird eingerichtet ... screen (4.8.0-6) wird eingerichtet ... libappstream4:amd64 (0.14.4-1) wird eingerichtet ... usbutils (1:013-3) wird eingerichtet ... dirmngr (2.2.27-2) wird eingerichtet ... Created symlink /etc/systemd/user/sockets.target.wants/dirmngr.socket → /usr/lib/systemd/user/dirmngr.socket. unattended-upgrades (2.8) wird eingerichtet ... Creating config file /etc/apt/apt.conf.d/20auto-upgrades with new version Creating config file /etc/apt/apt.conf.d/50unattended-upgrades with new version Created symlink /etc/systemd/system/multi-user.target.wants/unattended-upgrades.service → /lib/systemd/system/unattended-upgrades.service. Synchronizing state of unattended-upgrades.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install enable unattended-upgrades python3-software-properties (0.96.20.2-2.1) wird eingerichtet ... cpufrequtils (008-2) wird eingerichtet ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults gir1.2-glib-2.0:amd64 (1.66.1-1+b1) wird eingerichtet ... gpg-wks-server (2.2.27-2) wird eingerichtet ... libnl-genl-3-200:amd64 (3.4.0-1+b1) wird eingerichtet ... libpolkit-agent-1-0:amd64 (0.105-31) wird eingerichtet ... policykit-1 (0.105-31) wird eingerichtet ... gpg-wks-client (2.2.27-2) wird eingerichtet ... htop (3.0.5-7) wird eingerichtet ... gir1.2-packagekitglib-1.0 (1.2.2-2) wird eingerichtet ... python3-gi (3.38.0-2) wird eingerichtet ... gnupg (2.2.27-2) wird eingerichtet ... packagekit (1.2.2-2) wird eingerichtet ... Created symlink /etc/systemd/user/sockets.target.wants/pk-debconf-helper.socket → /usr/lib/systemd/user/pk-debconf-helper.socket. packagekit-tools (1.2.2-2) wird eingerichtet ... software-properties-common (0.96.20.2-2.1) wird eingerichtet ... Trigger für mailcap (3.69) werden verarbeitet ... Trigger für libc-bin (2.31-13) werden verarbeitet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für dbus (1.12.20-2) werden verarbeitet ... + return 0 + echo OK OK + needed_packages + local 'bluetoothPackages=bluez python3-dev libbluetooth-dev raspberrypi-sys-mods pi-bluetooth' ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:03:16_CEST [openHABian] Installing additional needed packages... ' 2021-09-26_15:03:16_CEST [openHABian] Installing additional needed packages... + cond_redirect apt-get install --yes apt-transport-https bc sysstat jq moreutils avahi-daemon python3 python3-pip python3-wheel python3-setuptools avahi-autoipd fontconfig + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes apt-transport-https bc sysstat jq moreutils avahi-daemon python3 python3-pip python3-wheel python3-setuptools avahi-autoipd fontconfig \033[39;49;00m' $ apt-get install --yes apt-transport-https bc sysstat jq moreutils avahi-daemon python3 python3-pip python3-wheel python3-setuptools avahi-autoipd fontconfig  + apt-get install --yes apt-transport-https bc sysstat jq moreutils avahi-daemon python3 python3-pip python3-wheel python3-setuptools avahi-autoipd fontconfig Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 1% Statusinformationen werden eingelesen… Fertig python3 ist schon die neueste Version (3.9.2-3). Die folgenden zusätzlichen Pakete werden installiert: binutils binutils-common binutils-x86-64-linux-gnu build-essential dpkg-dev fakeroot g++ g++-10 gcc gcc-10 javascript-common libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan6 libatomic1 libavahi-common-data libavahi-common3 libavahi-core7 libbinutils libc-dev-bin libc-devtools libc6-dev libcc1-0 libcrypt-dev libctf-nobfd0 libctf0 libdaemon0 libdeflate0 libdpkg-perl libexpat1-dev libfakeroot libfile-fcntllock-perl libgcc-10-dev libgd3 libgomp1 libio-pty-perl libipc-run-perl libitm1 libjbig0 libjpeg62-turbo libjq1 libjs-jquery libjs-sphinxdoc libjs-underscore liblsan0 libnsl-dev libnss-mdns libonig5 libpython3-dev libpython3.9 libpython3.9-dev libquadmath0 libstdc++-10-dev libtiff5 libtime-duration-perl libtimedate-perl libtirpc-dev libtsan0 libubsan1 libwebp6 linux-libc-dev make manpages-dev python-pip-whl python3-dev python3-distutils python3-lib2to3 python3.9-dev zlib1g-dev Vorgeschlagene Pakete: binutils-doc debian-keyring g++-multilib g++-10-multilib gcc-10-doc gcc-multilib autoconf automake libtool flex bison gdb gcc-doc gcc-10-multilib gcc-10-locales apache2 | lighttpd | httpd glibc-doc bzr libgd-tools libstdc++-10-doc make-doc python-setuptools-doc isag Die folgenden NEUEN Pakete werden installiert: apt-transport-https avahi-autoipd avahi-daemon bc binutils binutils-common binutils-x86-64-linux-gnu build-essential dpkg-dev fakeroot fontconfig g++ g++-10 gcc gcc-10 javascript-common jq libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan6 libatomic1 libavahi-common-data libavahi-common3 libavahi-core7 libbinutils libc-dev-bin libc-devtools libc6-dev libcc1-0 libcrypt-dev libctf-nobfd0 libctf0 libdaemon0 libdeflate0 libdpkg-perl libexpat1-dev libfakeroot libfile-fcntllock-perl libgcc-10-dev libgd3 libgomp1 libio-pty-perl libipc-run-perl libitm1 libjbig0 libjpeg62-turbo libjq1 libjs-jquery libjs-sphinxdoc libjs-underscore liblsan0 libnsl-dev libnss-mdns libonig5 libpython3-dev libpython3.9 libpython3.9-dev libquadmath0 libstdc++-10-dev libtiff5 libtime-duration-perl libtimedate-perl libtirpc-dev libtsan0 libubsan1 libwebp6 linux-libc-dev make manpages-dev moreutils python-pip-whl python3-dev python3-distutils python3-lib2to3 python3-pip python3-setuptools python3-wheel python3.9-dev sysstat zlib1g-dev 0 aktualisiert, 81 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 65,9 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 245 MB Plattenplatz zusätzlich benutzt. 0% [Wird verarbeitet] Holen:1 http://security.debian.org bullseye-security/main amd64 linux-libc-dev amd64 5.10.46-5 [1.363 kB] 0% [Warten auf Kopfzeilen] [1 linux-libc-dev 0 B/1.363 kB 0%] Holen:2 http://ftp.debian.org/debian bullseye/main amd64 libavahi-common-data amd64 0.8-5 [124 kB] 0% [2 libavahi-common-data 944 B/124 kB 1%] [1 linux-libc-dev 27,4 kB/1.363 kB 2%] 1% [1 linux-libc-dev 180 kB/1.363 kB 13%] Holen:3 http://ftp.debian.org/debian bullseye/main amd64 libavahi-common3 amd64 0.8-5 [58,4 kB] 1% [3 libavahi-common3 4.720 B/58,4 kB 8%] [1 linux-libc-dev 395 kB/1.363 kB 29%] 1% [Warten auf Kopfzeilen] [1 linux-libc-dev 420 kB/1.363 kB 31%] Holen:4 http://ftp.debian.org/debian bullseye/main amd64 libavahi-core7 amd64 0.8-5 [121 kB] 1% [4 libavahi-core7 3.643 B/121 kB 3%] [1 linux-libc-dev 420 kB/1.363 kB 31%] 2% [1 linux-libc-dev 627 kB/1.363 kB 46%] Holen:5 http://ftp.debian.org/debian bullseye/main amd64 libdaemon0 amd64 0.14-7.1 [15,0 kB] 2% [5 libdaemon0 5.122 B/15,0 kB 34%] [1 linux-libc-dev 627 kB/1.363 kB 46%] 2% [Warten auf Kopfzeilen] [1 linux-libc-dev 641 kB/1.363 kB 47%] Holen:6 http://ftp.debian.org/debian bullseye/main amd64 avahi-daemon amd64 0.8-5 [100 kB] 2% [6 avahi-daemon 3.638 B/100 kB 4%] [1 linux-libc-dev 641 kB/1.363 kB 47%] 3% [Warten auf Kopfzeilen] [1 linux-libc-dev 671 kB/1.363 kB 49%] Holen:7 http://ftp.debian.org/debian bullseye/main amd64 apt-transport-https all 2.2.4 [160 kB] 3% [7 apt-transport-https 182 B/160 kB 0%] [1 linux-libc-dev 671 kB/1.363 kB 49%] 3% [Warten auf Kopfzeilen] [1 linux-libc-dev 939 kB/1.363 kB 69%] Holen:8 http://ftp.debian.org/debian bullseye/main amd64 avahi-autoipd amd64 0.8-5 [58,2 kB] 3% [8 avahi-autoipd 356 B/58,2 kB 1%] [1 linux-libc-dev 939 kB/1.363 kB 69%] 4% [Warten auf Kopfzeilen] [1 linux-libc-dev 1.087 kB/1.363 kB 80%] Holen:9 http://ftp.debian.org/debian bullseye/main amd64 bc amd64 1.07.1-2+b2 [109 kB] 4% [9 bc 931 B/109 kB 1%] [1 linux-libc-dev 1.087 kB/1.363 kB 80%] 4% [1 linux-libc-dev 1.166 kB/1.363 kB 86%] Holen:10 http://ftp.debian.org/debian bullseye/main amd64 binutils-common amd64 2.35.2-2 [2.220 kB] 4% [10 binutils-common 2.670 B/2.220 kB 0%] [1 linux-libc-dev 1.166 kB/1.363 kB 86%] 5% [10 binutils-common 203 kB/2.220 kB 9%] 8% [Warten auf Kopfzeilen] Holen:11 http://ftp.debian.org/debian bullseye/main amd64 libbinutils amd64 2.35.2-2 [570 kB] 8% [11 libbinutils 2.743 B/570 kB 0%] 9% [Warten auf Kopfzeilen] Holen:12 http://ftp.debian.org/debian bullseye/main amd64 libctf-nobfd0 amd64 2.35.2-2 [110 kB] 9% [12 libctf-nobfd0 2.291 B/110 kB 2%] 9% [Wird verarbeitet] Holen:13 http://ftp.debian.org/debian bullseye/main amd64 libctf0 amd64 2.35.2-2 [53,2 kB] 9% [13 libctf0 3.737 B/53,2 kB 7%] 9% [Warten auf Kopfzeilen] Holen:14 http://ftp.debian.org/debian bullseye/main amd64 binutils-x86-64-linux-gnu amd64 2.35.2-2 [1.809 kB] 9% [14 binutils-x86-64-linux-gnu 1.784 B/1.809 kB 0%] 12% [Wird verarbeitet] Holen:15 http://ftp.debian.org/debian bullseye/main amd64 binutils amd64 2.35.2-2 [61,2 kB] 12% [15 binutils 6.930 B/61,2 kB 11%] 12% [Warten auf Kopfzeilen] Holen:16 http://ftp.debian.org/debian bullseye/main amd64 libc-dev-bin amd64 2.31-13 [275 kB] 12% [16 libc-dev-bin 4.495 B/275 kB 2%] 13% [Warten auf Kopfzeilen] Holen:17 http://ftp.debian.org/debian bullseye/main amd64 libcrypt-dev amd64 1:4.4.18-4 [104 kB] 13% [17 libcrypt-dev 2.823 B/104 kB 3%] 13% [Warten auf Kopfzeilen] Holen:18 http://ftp.debian.org/debian bullseye/main amd64 libtirpc-dev amd64 1.3.1-1 [190 kB] 13% [18 libtirpc-dev 4.707 B/190 kB 2%] 14% [Warten auf Kopfzeilen] Holen:19 http://ftp.debian.org/debian bullseye/main amd64 libnsl-dev amd64 1.3.0-2 [66,4 kB] 14% [19 libnsl-dev 0 B/66,4 kB 0%] 14% [Warten auf Kopfzeilen] Holen:20 http://ftp.debian.org/debian bullseye/main amd64 libc6-dev amd64 2.31-13 [2.344 kB] 14% [20 libc6-dev 6.406 B/2.344 kB 0%] 17% [Wird verarbeitet] Holen:21 http://ftp.debian.org/debian bullseye/main amd64 libcc1-0 amd64 10.2.1-6 [47,0 kB] 17% [21 libcc1-0 3.352 B/47,0 kB 7%] 17% [Wird verarbeitet] Holen:22 http://ftp.debian.org/debian bullseye/main amd64 libgomp1 amd64 10.2.1-6 [99,9 kB] 17% [22 libgomp1 3.877 B/99,9 kB 4%] 18% [Warten auf Kopfzeilen] Holen:23 http://ftp.debian.org/debian bullseye/main amd64 libitm1 amd64 10.2.1-6 [25,8 kB] 18% [23 libitm1 1.475 B/25,8 kB 6%] 18% [Warten auf Kopfzeilen] Holen:24 http://ftp.debian.org/debian bullseye/main amd64 libatomic1 amd64 10.2.1-6 [9.008 B] 18% [24 libatomic1 2.410 B/9.008 B 27%] 18% [Warten auf Kopfzeilen] Holen:25 http://ftp.debian.org/debian bullseye/main amd64 libasan6 amd64 10.2.1-6 [2.065 kB] 18% [25 libasan6 1.228 B/2.065 kB 0%] 21% [Warten auf Kopfzeilen] Holen:26 http://ftp.debian.org/debian bullseye/main amd64 liblsan0 amd64 10.2.1-6 [828 kB] 21% [26 liblsan0 5.476 B/828 kB 1%] 22% [Wird verarbeitet] Holen:27 http://ftp.debian.org/debian bullseye/main amd64 libtsan0 amd64 10.2.1-6 [2.000 kB] 22% [27 libtsan0 4.554 B/2.000 kB 0%] 25% [Wird verarbeitet] Holen:28 http://ftp.debian.org/debian bullseye/main amd64 libubsan1 amd64 10.2.1-6 [777 kB] 25% [28 libubsan1 7.673 B/777 kB 1%] 26% [Warten auf Kopfzeilen] Holen:29 http://ftp.debian.org/debian bullseye/main amd64 libquadmath0 amd64 10.2.1-6 [145 kB] 26% [29 libquadmath0 6.777 B/145 kB 5%] 26% [Warten auf Kopfzeilen] Holen:30 http://ftp.debian.org/debian bullseye/main amd64 libgcc-10-dev amd64 10.2.1-6 [2.328 kB] 26% [30 libgcc-10-dev 1.556 B/2.328 kB 0%] 30% [Warten auf Kopfzeilen] Holen:31 http://ftp.debian.org/debian bullseye/main amd64 gcc-10 amd64 10.2.1-6 [17,0 MB] 30% [31 gcc-10 9.664 B/17,0 MB 0%] 33% [31 gcc-10 3.238 kB/17,0 MB 19%] 37% [31 gcc-10 6.475 kB/17,0 MB 38%] 41% [31 gcc-10 9.714 kB/17,0 MB 57%] 45% [31 gcc-10 13,0 MB/17,0 MB 76%] 49% [31 gcc-10 16,2 MB/17,0 MB 95%] 50% [Wird verarbeitet] Holen:32 http://ftp.debian.org/debian bullseye/main amd64 gcc amd64 4:10.2.1-1 [5.192 B] 50% [32 gcc 5.192 B/5.192 B 100%] 51% [Wird verarbeitet] Holen:33 http://ftp.debian.org/debian bullseye/main amd64 libstdc++-10-dev amd64 10.2.1-6 [1.741 kB] 51% [33 libstdc++-10-dev 4.096 B/1.741 kB 0%] 53% [Warten auf Kopfzeilen] Holen:34 http://ftp.debian.org/debian bullseye/main amd64 g++-10 amd64 10.2.1-6 [9.380 kB] 53% [34 g++-10 8.215 B/9.380 kB 0%] 57% [34 g++-10 3.247 kB/9.380 kB 35%] 6.314 kB/s 4 s 61% [34 g++-10 6.485 kB/9.380 kB 69%] 6.314 kB/s 3 s 65% [Warten auf Kopfzeilen] 6.314 kB/s 3 s Holen:35 http://ftp.debian.org/debian bullseye/main amd64 g++ amd64 4:10.2.1-1 [1.644 B] 65% [35 g++ 1.644 B/1.644 B 100%] 6.314 kB/s 3 s 65% [Wird verarbeitet] 6.314 kB/s 3 s Holen:36 http://ftp.debian.org/debian bullseye/main amd64 make amd64 4.3-4.1 [396 kB] 65% [36 make 8.890 B/396 kB 2%] 6.314 kB/s 3 s 66% [Warten auf Kopfzeilen] 6.314 kB/s 3 s Holen:37 http://ftp.debian.org/debian bullseye/main amd64 libdpkg-perl all 1.20.9 [1.537 kB] 66% [37 libdpkg-perl 3.949 B/1.537 kB 0%] 6.314 kB/s 3 s 68% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:38 http://ftp.debian.org/debian bullseye/main amd64 dpkg-dev all 1.20.9 [2.153 kB] 68% [38 dpkg-dev 5.595 B/2.153 kB 0%] 6.314 kB/s 2 s 71% [Wird verarbeitet] 6.314 kB/s 2 s Holen:39 http://ftp.debian.org/debian bullseye/main amd64 build-essential amd64 12.9 [7.704 B] 71% [39 build-essential 7.704 B/7.704 B 100%] 6.314 kB/s 2 s 71% [Wird verarbeitet] 6.314 kB/s 2 s Holen:40 http://ftp.debian.org/debian bullseye/main amd64 libfakeroot amd64 1.25.3-1.1 [47,0 kB] 71% [40 libfakeroot 7.457 B/47,0 kB 16%] 6.314 kB/s 2 s 71% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:41 http://ftp.debian.org/debian bullseye/main amd64 fakeroot amd64 1.25.3-1.1 [87,0 kB] 71% [41 fakeroot 7.922 B/87,0 kB 9%] 6.314 kB/s 2 s 72% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:42 http://ftp.debian.org/debian bullseye/main amd64 fontconfig amd64 2.13.1-4.2 [417 kB] 72% [42 fontconfig 462 B/417 kB 0%] 6.314 kB/s 2 s 72% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:43 http://ftp.debian.org/debian bullseye/main amd64 javascript-common all 11+nmu1 [6.260 B] 72% [43 javascript-common 3.357 B/6.260 B 54%] 6.314 kB/s 2 s 73% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:44 http://ftp.debian.org/debian bullseye/main amd64 libonig5 amd64 6.9.6-1.1 [185 kB] 73% [44 libonig5 2.093 B/185 kB 1%] 6.314 kB/s 2 s 73% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:45 http://ftp.debian.org/debian bullseye/main amd64 libjq1 amd64 1.6-2.1 [135 kB] 73% [45 libjq1 4.757 B/135 kB 4%] 6.314 kB/s 2 s 73% [Wird verarbeitet] 6.314 kB/s 2 s Holen:46 http://ftp.debian.org/debian bullseye/main amd64 jq amd64 1.6-2.1 [64,9 kB] 73% [46 jq 1.308 B/64,9 kB 2%] 6.314 kB/s 2 s 74% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:47 http://ftp.debian.org/debian bullseye/main amd64 libalgorithm-diff-perl all 1.201-1 [43,3 kB] 74% [47 libalgorithm-diff-perl 3.679 B/43,3 kB 8%] 6.314 kB/s 2 s 74% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:48 http://ftp.debian.org/debian bullseye/main amd64 libalgorithm-diff-xs-perl amd64 0.04-6+b1 [12,0 kB] 74% [48 libalgorithm-diff-xs-perl 944 B/12,0 kB 8%] 6.314 kB/s 2 s 74% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:49 http://ftp.debian.org/debian bullseye/main amd64 libalgorithm-merge-perl all 0.08-3 [12,7 kB] 74% [49 libalgorithm-merge-perl 3.110 B/12,7 kB 24%] 6.314 kB/s 2 s 75% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:50 http://ftp.debian.org/debian bullseye/main amd64 libjpeg62-turbo amd64 1:2.0.6-4 [151 kB] 75% [50 libjpeg62-turbo 3.776 B/151 kB 3%] 6.314 kB/s 2 s 75% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:51 http://ftp.debian.org/debian bullseye/main amd64 libdeflate0 amd64 1.7-1 [53,1 kB] 75% [51 libdeflate0 2.570 B/53,1 kB 5%] 6.314 kB/s 2 s 75% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:52 http://ftp.debian.org/debian bullseye/main amd64 libjbig0 amd64 2.1-3.1+b2 [31,0 kB] 75% [52 libjbig0 5.433 B/31,0 kB 18%] 6.314 kB/s 2 s 76% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:53 http://ftp.debian.org/debian bullseye/main amd64 libwebp6 amd64 0.6.1-2.1 [258 kB] 76% [53 libwebp6 3.066 B/258 kB 1%] 6.314 kB/s 2 s 76% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:54 http://ftp.debian.org/debian bullseye/main amd64 libtiff5 amd64 4.2.0-1 [289 kB] 76% [54 libtiff5 3.531 B/289 kB 1%] 6.314 kB/s 2 s 77% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:55 http://ftp.debian.org/debian bullseye/main amd64 libgd3 amd64 2.3.0-2 [137 kB] 77% [55 libgd3 6.451 B/137 kB 5%] 6.314 kB/s 2 s 77% [Wird verarbeitet] 6.314 kB/s 2 s Holen:56 http://ftp.debian.org/debian bullseye/main amd64 libc-devtools amd64 2.31-13 [245 kB] 77% [56 libc-devtools 2.669 B/245 kB 1%] 6.314 kB/s 2 s 78% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:57 http://ftp.debian.org/debian bullseye/main amd64 libexpat1-dev amd64 2.2.10-2 [140 kB] 78% [57 libexpat1-dev 3.351 B/140 kB 2%] 6.314 kB/s 2 s 78% [Wird verarbeitet] 6.314 kB/s 2 s Holen:58 http://ftp.debian.org/debian bullseye/main amd64 libfile-fcntllock-perl amd64 0.22-3+b7 [35,5 kB] 78% [58 libfile-fcntllock-perl 2.645 B/35,5 kB 7%] 6.314 kB/s 2 s 78% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:59 http://ftp.debian.org/debian bullseye/main amd64 libio-pty-perl amd64 1:1.15-2 [37,0 kB] 78% [59 libio-pty-perl 4.276 B/37,0 kB 12%] 6.314 kB/s 2 s 79% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:60 http://ftp.debian.org/debian bullseye/main amd64 libipc-run-perl all 20200505.0-1 [102 kB] 79% [60 libipc-run-perl 2.832 B/102 kB 3%] 6.314 kB/s 2 s 79% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:61 http://ftp.debian.org/debian bullseye/main amd64 libjs-jquery all 3.5.1+dfsg+~3.5.5-7 [315 kB] 79% [61 libjs-jquery 5.426 B/315 kB 2%] 6.314 kB/s 2 s 80% [Warten auf Kopfzeilen] 6.314 kB/s 2 s Holen:62 http://ftp.debian.org/debian bullseye/main amd64 libjs-underscore all 1.9.1~dfsg-3 [100 kB] 80% [62 libjs-underscore 6.423 B/100 kB 6%] 6.314 kB/s 2 s 80% [Warten auf Kopfzeilen] 6.314 kB/s 1 s Holen:63 http://ftp.debian.org/debian bullseye/main amd64 libjs-sphinxdoc all 3.4.3-2 [127 kB] 80% [63 libjs-sphinxdoc 1.888 B/127 kB 1%] 6.314 kB/s 1 s 80% [Warten auf Kopfzeilen] 6.314 kB/s 1 s Holen:64 http://ftp.debian.org/debian bullseye/main amd64 libnss-mdns amd64 0.14.1-2 [26,9 kB] 80% [64 libnss-mdns 4.096 B/26,9 kB 15%] 6.314 kB/s 1 s 81% [Warten auf Kopfzeilen] 6.314 kB/s 1 s Holen:65 http://ftp.debian.org/debian bullseye/main amd64 libpython3.9 amd64 3.9.2-1 [1.691 kB] 81% [65 libpython3.9 5.308 B/1.691 kB 0%] 6.314 kB/s 1 s 83% [Wird verarbeitet] 6.314 kB/s 1 s Holen:66 http://ftp.debian.org/debian bullseye/main amd64 libpython3.9-dev amd64 3.9.2-1 [4.028 kB] 83% [66 libpython3.9-dev 5.231 B/4.028 kB 0%] 6.314 kB/s 1 s 85% [66 libpython3.9-dev 1.990 kB/4.028 kB 49%] 6.314 kB/s 1 s 88% [Warten auf Kopfzeilen] 6.314 kB/s 1 s Holen:67 http://ftp.debian.org/debian bullseye/main amd64 libpython3-dev amd64 3.9.2-3 [21,7 kB] 88% [67 libpython3-dev 12,3 kB/21,7 kB 57%] 6.314 kB/s 1 s 88% [Warten auf Kopfzeilen] 6.314 kB/s 1 s Holen:68 http://ftp.debian.org/debian bullseye/main amd64 libtime-duration-perl all 1.21-1 [13,7 kB] 88% [68 libtime-duration-perl 1.323 B/13,7 kB 10%] 6.314 kB/s 1 s 89% [Warten auf Kopfzeilen] 6.314 kB/s 1 s Holen:69 http://ftp.debian.org/debian bullseye/main amd64 libtimedate-perl all 2.3300-2 [39,3 kB] 89% [69 libtimedate-perl 1.165 B/39,3 kB 3%] 6.314 kB/s 1 s 89% [Warten auf Kopfzeilen] 6.314 kB/s 1 s Holen:70 http://ftp.debian.org/debian bullseye/main amd64 manpages-dev all 5.10-1 [2.309 kB] 89% [70 manpages-dev 5.547 B/2.309 kB 0%] 6.314 kB/s 1 s 92% [Warten auf Kopfzeilen] 6.314 kB/s 0 s Holen:71 http://ftp.debian.org/debian bullseye/main amd64 moreutils amd64 0.65-1 [75,5 kB] 92% [71 moreutils 6.112 B/75,5 kB 8%] 6.314 kB/s 0 s 92% [Warten auf Kopfzeilen] 6.314 kB/s 0 s Holen:72 http://ftp.debian.org/debian bullseye/main amd64 python-pip-whl all 20.3.4-4 [1.948 kB] 92% [72 python-pip-whl 2.634 B/1.948 kB 0%] 6.314 kB/s 0 s 95% [Wird verarbeitet] 6.314 kB/s 0 s Holen:73 http://ftp.debian.org/debian bullseye/main amd64 zlib1g-dev amd64 1:1.2.11.dfsg-2 [190 kB] 95% [73 zlib1g-dev 2.546 B/190 kB 1%] 6.314 kB/s 0 s 95% [Warten auf Kopfzeilen] 6.314 kB/s 0 s Holen:74 http://ftp.debian.org/debian bullseye/main amd64 python3.9-dev amd64 3.9.2-1 [515 kB] 95% [74 python3.9-dev 1.411 B/515 kB 0%] 6.314 kB/s 0 s 96% [Warten auf Kopfzeilen] 6.314 kB/s 0 s Holen:75 http://ftp.debian.org/debian bullseye/main amd64 python3-lib2to3 all 3.9.2-1 [77,8 kB] 96% [75 python3-lib2to3 5.080 B/77,8 kB 7%] 6.314 kB/s 0 s 97% [Warten auf Kopfzeilen] 6.314 kB/s 0 s Holen:76 http://ftp.debian.org/debian bullseye/main amd64 python3-distutils all 3.9.2-1 [143 kB] 97% [76 python3-distutils 4.048 B/143 kB 3%] 6.314 kB/s 0 s 97% [Warten auf Kopfzeilen] 6.314 kB/s 0 s Holen:77 http://ftp.debian.org/debian bullseye/main amd64 python3-dev amd64 3.9.2-3 [24,8 kB] 97% [77 python3-dev 6.750 B/24,8 kB 27%] 6.314 kB/s 0 s 97% [Warten auf Kopfzeilen] 6.314 kB/s 0 s Holen:78 http://ftp.debian.org/debian bullseye/main amd64 python3-setuptools all 52.0.0-4 [366 kB] 97% [78 python3-setuptools 2.970 B/366 kB 1%] 6.314 kB/s 0 s 98% [Wird verarbeitet] 6.314 kB/s 0 s Holen:79 http://ftp.debian.org/debian bullseye/main amd64 python3-wheel all 0.34.2-1 [24,0 kB] 98% [79 python3-wheel 5.896 B/24,0 kB 25%] 6.314 kB/s 0 s 98% [Wird verarbeitet] 6.314 kB/s 0 s Holen:80 http://ftp.debian.org/debian bullseye/main amd64 python3-pip all 20.3.4-4 [337 kB] 98% [80 python3-pip 2.976 B/337 kB 1%] 6.314 kB/s 0 s 99% [Wird verarbeitet] 6.314 kB/s 0 s Holen:81 http://ftp.debian.org/debian bullseye/main amd64 sysstat amd64 12.5.2-2 [603 kB] 99% [81 sysstat 0 B/603 kB 0%] 6.314 kB/s 0 s 100% [Wird verarbeitet] 6.314 kB/s 0 s Es wurden 65,9 MB in 10 s geholt (6.333 kB/s). Extrahiere Vorlagen aus Paketen: 37% Extrahiere Vorlagen aus Paketen: 74% Extrahiere Vorlagen aus Paketen: 100% Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket libavahi-common-data:amd64 wird gewählt. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 26244 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../00-libavahi-common-data_0.8-5_amd64.deb ... Entpacken von libavahi-common-data:amd64 (0.8-5) ... Vormals nicht ausgewähltes Paket libavahi-common3:amd64 wird gewählt. Vorbereitung zum Entpacken von .../01-libavahi-common3_0.8-5_amd64.deb ... Entpacken von libavahi-common3:amd64 (0.8-5) ... Vormals nicht ausgewähltes Paket libavahi-core7:amd64 wird gewählt. Vorbereitung zum Entpacken von .../02-libavahi-core7_0.8-5_amd64.deb ... Entpacken von libavahi-core7:amd64 (0.8-5) ... Vormals nicht ausgewähltes Paket libdaemon0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../03-libdaemon0_0.14-7.1_amd64.deb ... Entpacken von libdaemon0:amd64 (0.14-7.1) ... Vormals nicht ausgewähltes Paket avahi-daemon wird gewählt. Vorbereitung zum Entpacken von .../04-avahi-daemon_0.8-5_amd64.deb ... Entpacken von avahi-daemon (0.8-5) ... Vormals nicht ausgewähltes Paket apt-transport-https wird gewählt. Vorbereitung zum Entpacken von .../05-apt-transport-https_2.2.4_all.deb ... Entpacken von apt-transport-https (2.2.4) ... Vormals nicht ausgewähltes Paket avahi-autoipd wird gewählt. Vorbereitung zum Entpacken von .../06-avahi-autoipd_0.8-5_amd64.deb ... Entpacken von avahi-autoipd (0.8-5) ... Vormals nicht ausgewähltes Paket bc wird gewählt. Vorbereitung zum Entpacken von .../07-bc_1.07.1-2+b2_amd64.deb ... Entpacken von bc (1.07.1-2+b2) ... Vormals nicht ausgewähltes Paket binutils-common:amd64 wird gewählt. Vorbereitung zum Entpacken von .../08-binutils-common_2.35.2-2_amd64.deb ... Entpacken von binutils-common:amd64 (2.35.2-2) ... Vormals nicht ausgewähltes Paket libbinutils:amd64 wird gewählt. Vorbereitung zum Entpacken von .../09-libbinutils_2.35.2-2_amd64.deb ... Entpacken von libbinutils:amd64 (2.35.2-2) ... Vormals nicht ausgewähltes Paket libctf-nobfd0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../10-libctf-nobfd0_2.35.2-2_amd64.deb ... Entpacken von libctf-nobfd0:amd64 (2.35.2-2) ... Vormals nicht ausgewähltes Paket libctf0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../11-libctf0_2.35.2-2_amd64.deb ... Entpacken von libctf0:amd64 (2.35.2-2) ... Vormals nicht ausgewähltes Paket binutils-x86-64-linux-gnu wird gewählt. Vorbereitung zum Entpacken von .../12-binutils-x86-64-linux-gnu_2.35.2-2_amd64.deb ... Entpacken von binutils-x86-64-linux-gnu (2.35.2-2) ... Vormals nicht ausgewähltes Paket binutils wird gewählt. Vorbereitung zum Entpacken von .../13-binutils_2.35.2-2_amd64.deb ... Entpacken von binutils (2.35.2-2) ... Vormals nicht ausgewähltes Paket libc-dev-bin wird gewählt. Vorbereitung zum Entpacken von .../14-libc-dev-bin_2.31-13_amd64.deb ... Entpacken von libc-dev-bin (2.31-13) ... Vormals nicht ausgewähltes Paket linux-libc-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../15-linux-libc-dev_5.10.46-5_amd64.deb ... Entpacken von linux-libc-dev:amd64 (5.10.46-5) ... Vormals nicht ausgewähltes Paket libcrypt-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../16-libcrypt-dev_1%3a4.4.18-4_amd64.deb ... Entpacken von libcrypt-dev:amd64 (1:4.4.18-4) ... Vormals nicht ausgewähltes Paket libtirpc-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../17-libtirpc-dev_1.3.1-1_amd64.deb ... Entpacken von libtirpc-dev:amd64 (1.3.1-1) ... Vormals nicht ausgewähltes Paket libnsl-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../18-libnsl-dev_1.3.0-2_amd64.deb ... Entpacken von libnsl-dev:amd64 (1.3.0-2) ... Vormals nicht ausgewähltes Paket libc6-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../19-libc6-dev_2.31-13_amd64.deb ... Entpacken von libc6-dev:amd64 (2.31-13) ... Vormals nicht ausgewähltes Paket libcc1-0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../20-libcc1-0_10.2.1-6_amd64.deb ... Entpacken von libcc1-0:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libgomp1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../21-libgomp1_10.2.1-6_amd64.deb ... Entpacken von libgomp1:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libitm1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../22-libitm1_10.2.1-6_amd64.deb ... Entpacken von libitm1:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libatomic1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../23-libatomic1_10.2.1-6_amd64.deb ... Entpacken von libatomic1:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libasan6:amd64 wird gewählt. Vorbereitung zum Entpacken von .../24-libasan6_10.2.1-6_amd64.deb ... Entpacken von libasan6:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket liblsan0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../25-liblsan0_10.2.1-6_amd64.deb ... Entpacken von liblsan0:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libtsan0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../26-libtsan0_10.2.1-6_amd64.deb ... Entpacken von libtsan0:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libubsan1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../27-libubsan1_10.2.1-6_amd64.deb ... Entpacken von libubsan1:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libquadmath0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../28-libquadmath0_10.2.1-6_amd64.deb ... Entpacken von libquadmath0:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket libgcc-10-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../29-libgcc-10-dev_10.2.1-6_amd64.deb ... Entpacken von libgcc-10-dev:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket gcc-10 wird gewählt. Vorbereitung zum Entpacken von .../30-gcc-10_10.2.1-6_amd64.deb ... Entpacken von gcc-10 (10.2.1-6) ... Vormals nicht ausgewähltes Paket gcc wird gewählt. Vorbereitung zum Entpacken von .../31-gcc_4%3a10.2.1-1_amd64.deb ... Entpacken von gcc (4:10.2.1-1) ... Vormals nicht ausgewähltes Paket libstdc++-10-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../32-libstdc++-10-dev_10.2.1-6_amd64.deb ... Entpacken von libstdc++-10-dev:amd64 (10.2.1-6) ... Vormals nicht ausgewähltes Paket g++-10 wird gewählt. Vorbereitung zum Entpacken von .../33-g++-10_10.2.1-6_amd64.deb ... Entpacken von g++-10 (10.2.1-6) ... Vormals nicht ausgewähltes Paket g++ wird gewählt. Vorbereitung zum Entpacken von .../34-g++_4%3a10.2.1-1_amd64.deb ... Entpacken von g++ (4:10.2.1-1) ... Vormals nicht ausgewähltes Paket make wird gewählt. Vorbereitung zum Entpacken von .../35-make_4.3-4.1_amd64.deb ... Entpacken von make (4.3-4.1) ... Vormals nicht ausgewähltes Paket libdpkg-perl wird gewählt. Vorbereitung zum Entpacken von .../36-libdpkg-perl_1.20.9_all.deb ... Entpacken von libdpkg-perl (1.20.9) ... Vormals nicht ausgewähltes Paket dpkg-dev wird gewählt. Vorbereitung zum Entpacken von .../37-dpkg-dev_1.20.9_all.deb ... Entpacken von dpkg-dev (1.20.9) ... Vormals nicht ausgewähltes Paket build-essential wird gewählt. Vorbereitung zum Entpacken von .../38-build-essential_12.9_amd64.deb ... Entpacken von build-essential (12.9) ... Vormals nicht ausgewähltes Paket libfakeroot:amd64 wird gewählt. Vorbereitung zum Entpacken von .../39-libfakeroot_1.25.3-1.1_amd64.deb ... Entpacken von libfakeroot:amd64 (1.25.3-1.1) ... Vormals nicht ausgewähltes Paket fakeroot wird gewählt. Vorbereitung zum Entpacken von .../40-fakeroot_1.25.3-1.1_amd64.deb ... Entpacken von fakeroot (1.25.3-1.1) ... Vormals nicht ausgewähltes Paket fontconfig wird gewählt. Vorbereitung zum Entpacken von .../41-fontconfig_2.13.1-4.2_amd64.deb ... Entpacken von fontconfig (2.13.1-4.2) ... Vormals nicht ausgewähltes Paket javascript-common wird gewählt. Vorbereitung zum Entpacken von .../42-javascript-common_11+nmu1_all.deb ... Entpacken von javascript-common (11+nmu1) ... Vormals nicht ausgewähltes Paket libonig5:amd64 wird gewählt. Vorbereitung zum Entpacken von .../43-libonig5_6.9.6-1.1_amd64.deb ... Entpacken von libonig5:amd64 (6.9.6-1.1) ... Vormals nicht ausgewähltes Paket libjq1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../44-libjq1_1.6-2.1_amd64.deb ... Entpacken von libjq1:amd64 (1.6-2.1) ... Vormals nicht ausgewähltes Paket jq wird gewählt. Vorbereitung zum Entpacken von .../45-jq_1.6-2.1_amd64.deb ... Entpacken von jq (1.6-2.1) ... Vormals nicht ausgewähltes Paket libalgorithm-diff-perl wird gewählt. Vorbereitung zum Entpacken von .../46-libalgorithm-diff-perl_1.201-1_all.deb ... Entpacken von libalgorithm-diff-perl (1.201-1) ... Vormals nicht ausgewähltes Paket libalgorithm-diff-xs-perl wird gewählt. Vorbereitung zum Entpacken von .../47-libalgorithm-diff-xs-perl_0.04-6+b1_amd64.deb ... Entpacken von libalgorithm-diff-xs-perl (0.04-6+b1) ... Vormals nicht ausgewähltes Paket libalgorithm-merge-perl wird gewählt. Vorbereitung zum Entpacken von .../48-libalgorithm-merge-perl_0.08-3_all.deb ... Entpacken von libalgorithm-merge-perl (0.08-3) ... Vormals nicht ausgewähltes Paket libjpeg62-turbo:amd64 wird gewählt. Vorbereitung zum Entpacken von .../49-libjpeg62-turbo_1%3a2.0.6-4_amd64.deb ... Entpacken von libjpeg62-turbo:amd64 (1:2.0.6-4) ... Vormals nicht ausgewähltes Paket libdeflate0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../50-libdeflate0_1.7-1_amd64.deb ... Entpacken von libdeflate0:amd64 (1.7-1) ... Vormals nicht ausgewähltes Paket libjbig0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../51-libjbig0_2.1-3.1+b2_amd64.deb ... Entpacken von libjbig0:amd64 (2.1-3.1+b2) ... Vormals nicht ausgewähltes Paket libwebp6:amd64 wird gewählt. Vorbereitung zum Entpacken von .../52-libwebp6_0.6.1-2.1_amd64.deb ... Entpacken von libwebp6:amd64 (0.6.1-2.1) ... Vormals nicht ausgewähltes Paket libtiff5:amd64 wird gewählt. Vorbereitung zum Entpacken von .../53-libtiff5_4.2.0-1_amd64.deb ... Entpacken von libtiff5:amd64 (4.2.0-1) ... Vormals nicht ausgewähltes Paket libgd3:amd64 wird gewählt. Vorbereitung zum Entpacken von .../54-libgd3_2.3.0-2_amd64.deb ... Entpacken von libgd3:amd64 (2.3.0-2) ... Vormals nicht ausgewähltes Paket libc-devtools wird gewählt. Vorbereitung zum Entpacken von .../55-libc-devtools_2.31-13_amd64.deb ... Entpacken von libc-devtools (2.31-13) ... Vormals nicht ausgewähltes Paket libexpat1-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../56-libexpat1-dev_2.2.10-2_amd64.deb ... Entpacken von libexpat1-dev:amd64 (2.2.10-2) ... Vormals nicht ausgewähltes Paket libfile-fcntllock-perl wird gewählt. Vorbereitung zum Entpacken von .../57-libfile-fcntllock-perl_0.22-3+b7_amd64.deb ... Entpacken von libfile-fcntllock-perl (0.22-3+b7) ... Vormals nicht ausgewähltes Paket libio-pty-perl wird gewählt. Vorbereitung zum Entpacken von .../58-libio-pty-perl_1%3a1.15-2_amd64.deb ... Entpacken von libio-pty-perl (1:1.15-2) ... Vormals nicht ausgewähltes Paket libipc-run-perl wird gewählt. Vorbereitung zum Entpacken von .../59-libipc-run-perl_20200505.0-1_all.deb ... Entpacken von libipc-run-perl (20200505.0-1) ... Vormals nicht ausgewähltes Paket libjs-jquery wird gewählt. Vorbereitung zum Entpacken von .../60-libjs-jquery_3.5.1+dfsg+~3.5.5-7_all.deb ... Entpacken von libjs-jquery (3.5.1+dfsg+~3.5.5-7) ... Vormals nicht ausgewähltes Paket libjs-underscore wird gewählt. Vorbereitung zum Entpacken von .../61-libjs-underscore_1.9.1~dfsg-3_all.deb ... Entpacken von libjs-underscore (1.9.1~dfsg-3) ... Vormals nicht ausgewähltes Paket libjs-sphinxdoc wird gewählt. Vorbereitung zum Entpacken von .../62-libjs-sphinxdoc_3.4.3-2_all.deb ... Entpacken von libjs-sphinxdoc (3.4.3-2) ... Vormals nicht ausgewähltes Paket libnss-mdns:amd64 wird gewählt. Vorbereitung zum Entpacken von .../63-libnss-mdns_0.14.1-2_amd64.deb ... Entpacken von libnss-mdns:amd64 (0.14.1-2) ... Vormals nicht ausgewähltes Paket libpython3.9:amd64 wird gewählt. Vorbereitung zum Entpacken von .../64-libpython3.9_3.9.2-1_amd64.deb ... Entpacken von libpython3.9:amd64 (3.9.2-1) ... Vormals nicht ausgewähltes Paket libpython3.9-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../65-libpython3.9-dev_3.9.2-1_amd64.deb ... Entpacken von libpython3.9-dev:amd64 (3.9.2-1) ... Vormals nicht ausgewähltes Paket libpython3-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../66-libpython3-dev_3.9.2-3_amd64.deb ... Entpacken von libpython3-dev:amd64 (3.9.2-3) ... Vormals nicht ausgewähltes Paket libtime-duration-perl wird gewählt. Vorbereitung zum Entpacken von .../67-libtime-duration-perl_1.21-1_all.deb ... Entpacken von libtime-duration-perl (1.21-1) ... Vormals nicht ausgewähltes Paket libtimedate-perl wird gewählt. Vorbereitung zum Entpacken von .../68-libtimedate-perl_2.3300-2_all.deb ... Entpacken von libtimedate-perl (2.3300-2) ... Vormals nicht ausgewähltes Paket manpages-dev wird gewählt. Vorbereitung zum Entpacken von .../69-manpages-dev_5.10-1_all.deb ... Entpacken von manpages-dev (5.10-1) ... Vormals nicht ausgewähltes Paket moreutils wird gewählt. Vorbereitung zum Entpacken von .../70-moreutils_0.65-1_amd64.deb ... Entpacken von moreutils (0.65-1) ... Vormals nicht ausgewähltes Paket python-pip-whl wird gewählt. Vorbereitung zum Entpacken von .../71-python-pip-whl_20.3.4-4_all.deb ... Entpacken von python-pip-whl (20.3.4-4) ... Vormals nicht ausgewähltes Paket zlib1g-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../72-zlib1g-dev_1%3a1.2.11.dfsg-2_amd64.deb ... Entpacken von zlib1g-dev:amd64 (1:1.2.11.dfsg-2) ... Vormals nicht ausgewähltes Paket python3.9-dev wird gewählt. Vorbereitung zum Entpacken von .../73-python3.9-dev_3.9.2-1_amd64.deb ... Entpacken von python3.9-dev (3.9.2-1) ... Vormals nicht ausgewähltes Paket python3-lib2to3 wird gewählt. Vorbereitung zum Entpacken von .../74-python3-lib2to3_3.9.2-1_all.deb ... Entpacken von python3-lib2to3 (3.9.2-1) ... Vormals nicht ausgewähltes Paket python3-distutils wird gewählt. Vorbereitung zum Entpacken von .../75-python3-distutils_3.9.2-1_all.deb ... Entpacken von python3-distutils (3.9.2-1) ... Vormals nicht ausgewähltes Paket python3-dev wird gewählt. Vorbereitung zum Entpacken von .../76-python3-dev_3.9.2-3_amd64.deb ... Entpacken von python3-dev (3.9.2-3) ... Vormals nicht ausgewähltes Paket python3-setuptools wird gewählt. Vorbereitung zum Entpacken von .../77-python3-setuptools_52.0.0-4_all.deb ... Entpacken von python3-setuptools (52.0.0-4) ... Vormals nicht ausgewähltes Paket python3-wheel wird gewählt. Vorbereitung zum Entpacken von .../78-python3-wheel_0.34.2-1_all.deb ... Entpacken von python3-wheel (0.34.2-1) ... Vormals nicht ausgewähltes Paket python3-pip wird gewählt. Vorbereitung zum Entpacken von .../79-python3-pip_20.3.4-4_all.deb ... Entpacken von python3-pip (20.3.4-4) ... Vormals nicht ausgewähltes Paket sysstat wird gewählt. Vorbereitung zum Entpacken von .../80-sysstat_12.5.2-2_amd64.deb ... Entpacken von sysstat (12.5.2-2) ... javascript-common (11+nmu1) wird eingerichtet ... manpages-dev (5.10-1) wird eingerichtet ... fontconfig (2.13.1-4.2) wird eingerichtet ... Regenerating fonts cache... done. apt-transport-https (2.2.4) wird eingerichtet ... libio-pty-perl (1:1.15-2) wird eingerichtet ... libfile-fcntllock-perl (0.22-3+b7) wird eingerichtet ... libalgorithm-diff-perl (1.201-1) wird eingerichtet ... binutils-common:amd64 (2.35.2-2) wird eingerichtet ... libdeflate0:amd64 (1.7-1) wird eingerichtet ... linux-libc-dev:amd64 (5.10.46-5) wird eingerichtet ... bc (1.07.1-2+b2) wird eingerichtet ... libctf-nobfd0:amd64 (2.35.2-2) wird eingerichtet ... libgomp1:amd64 (10.2.1-6) wird eingerichtet ... python3-wheel (0.34.2-1) wird eingerichtet ... libjbig0:amd64 (2.1-3.1+b2) wird eingerichtet ... libfakeroot:amd64 (1.25.3-1.1) wird eingerichtet ... libasan6:amd64 (10.2.1-6) wird eingerichtet ... fakeroot (1.25.3-1.1) wird eingerichtet ... update-alternatives: /usr/bin/fakeroot-sysv wird verwendet, um /usr/bin/fakeroot (fakeroot) im automatischen Modus bereitzustellen libtirpc-dev:amd64 (1.3.1-1) wird eingerichtet ... libpython3.9:amd64 (3.9.2-1) wird eingerichtet ... libjpeg62-turbo:amd64 (1:2.0.6-4) wird eingerichtet ... make (4.3-4.1) wird eingerichtet ... libavahi-common-data:amd64 (0.8-5) wird eingerichtet ... libquadmath0:amd64 (10.2.1-6) wird eingerichtet ... libatomic1:amd64 (10.2.1-6) wird eingerichtet ... libwebp6:amd64 (0.6.1-2.1) wird eingerichtet ... libipc-run-perl (20200505.0-1) wird eingerichtet ... libdpkg-perl (1.20.9) wird eingerichtet ... libtime-duration-perl (1.21-1) wird eingerichtet ... libtimedate-perl (2.3300-2) wird eingerichtet ... libubsan1:amd64 (10.2.1-6) wird eingerichtet ... libnsl-dev:amd64 (1.3.0-2) wird eingerichtet ... libcrypt-dev:amd64 (1:4.4.18-4) wird eingerichtet ... python-pip-whl (20.3.4-4) wird eingerichtet ... libtiff5:amd64 (4.2.0-1) wird eingerichtet ... libjs-jquery (3.5.1+dfsg+~3.5.5-7) wird eingerichtet ... libbinutils:amd64 (2.35.2-2) wird eingerichtet ... libc-dev-bin (2.31-13) wird eingerichtet ... libdaemon0:amd64 (0.14-7.1) wird eingerichtet ... python3-lib2to3 (3.9.2-1) wird eingerichtet ... libalgorithm-diff-xs-perl (0.04-6+b1) wird eingerichtet ... sysstat (12.5.2-2) wird eingerichtet ... Creating config file /etc/default/sysstat with new version update-alternatives: /usr/bin/sar.sysstat wird verwendet, um /usr/bin/sar (sar) im automatischen Modus bereitzustellen Created symlink /etc/systemd/system/sysstat.service.wants/sysstat-collect.timer → /lib/systemd/system/sysstat-collect.timer. Created symlink /etc/systemd/system/sysstat.service.wants/sysstat-summary.timer → /lib/systemd/system/sysstat-summary.timer. Created symlink /etc/systemd/system/multi-user.target.wants/sysstat.service → /lib/systemd/system/sysstat.service. libcc1-0:amd64 (10.2.1-6) wird eingerichtet ... libonig5:amd64 (6.9.6-1.1) wird eingerichtet ... liblsan0:amd64 (10.2.1-6) wird eingerichtet ... libitm1:amd64 (10.2.1-6) wird eingerichtet ... libjs-underscore (1.9.1~dfsg-3) wird eingerichtet ... libalgorithm-merge-perl (0.08-3) wird eingerichtet ... libtsan0:amd64 (10.2.1-6) wird eingerichtet ... libctf0:amd64 (2.35.2-2) wird eingerichtet ... python3-distutils (3.9.2-1) wird eingerichtet ... moreutils (0.65-1) wird eingerichtet ... python3-setuptools (52.0.0-4) wird eingerichtet ... libjq1:amd64 (1.6-2.1) wird eingerichtet ... libgcc-10-dev:amd64 (10.2.1-6) wird eingerichtet ... libavahi-common3:amd64 (0.8-5) wird eingerichtet ... libgd3:amd64 (2.3.0-2) wird eingerichtet ... avahi-autoipd (0.8-5) wird eingerichtet ... python3-pip (20.3.4-4) wird eingerichtet ... libjs-sphinxdoc (3.4.3-2) wird eingerichtet ... jq (1.6-2.1) wird eingerichtet ... libc6-dev:amd64 (2.31-13) wird eingerichtet ... libavahi-core7:amd64 (0.8-5) wird eingerichtet ... libc-devtools (2.31-13) wird eingerichtet ... binutils-x86-64-linux-gnu (2.35.2-2) wird eingerichtet ... libstdc++-10-dev:amd64 (10.2.1-6) wird eingerichtet ... binutils (2.35.2-2) wird eingerichtet ... dpkg-dev (1.20.9) wird eingerichtet ... libexpat1-dev:amd64 (2.2.10-2) wird eingerichtet ... gcc-10 (10.2.1-6) wird eingerichtet ... zlib1g-dev:amd64 (1:1.2.11.dfsg-2) wird eingerichtet ... avahi-daemon (0.8-5) wird eingerichtet ... Created symlink /etc/systemd/system/dbus-org.freedesktop.Avahi.service → /lib/systemd/system/avahi-daemon.service. Created symlink /etc/systemd/system/multi-user.target.wants/avahi-daemon.service → /lib/systemd/system/avahi-daemon.service. Created symlink /etc/systemd/system/sockets.target.wants/avahi-daemon.socket → /lib/systemd/system/avahi-daemon.socket. libnss-mdns:amd64 (0.14.1-2) wird eingerichtet ... First installation detected... Checking NSS setup... g++-10 (10.2.1-6) wird eingerichtet ... libpython3.9-dev:amd64 (3.9.2-1) wird eingerichtet ... gcc (4:10.2.1-1) wird eingerichtet ... g++ (4:10.2.1-1) wird eingerichtet ... update-alternatives: /usr/bin/g++ wird verwendet, um /usr/bin/c++ (c++) im automatischen Modus bereitzustellen python3.9-dev (3.9.2-1) wird eingerichtet ... build-essential (12.9) wird eingerichtet ... libpython3-dev:amd64 (3.9.2-3) wird eingerichtet ... python3-dev (3.9.2-3) wird eingerichtet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für dbus (1.12.20-2) werden verarbeitet ... Trigger für libc-bin (2.31-13) werden verarbeitet ... + return 0 + echo OK OK + is_pizerow + [[ pi4 == \p\i\0\w ]] + grep -q '^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[cC][0-9a-fA-F]$' /proc/cpuinfo + return 1 + is_pithree + [[ pi4 == \p\i\3 ]] + grep -q '^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[8dDeE][0-9a-fA-F]$' /proc/cpuinfo + return 1 + is_pithreeplus + [[ pi4 == \p\i\3\+ ]] + grep -q '^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[dDeE][0-9a-fA-F]$' /proc/cpuinfo + return 1 + is_pifour + [[ pi4 == \p\i\4 ]] + return 0 + [[ -z '' ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:04_CEST [openHABian] Installing pigpio package... ' 2021-09-26_15:04:04_CEST [openHABian] Installing pigpio package... + cond_redirect apt-get install --yes pigpio + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes pigpio \033[39;49;00m' $ apt-get install --yes pigpio  + apt-get install --yes pigpio Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig Paket pigpio ist nicht verfügbar, wird aber von einem anderen Paket referenziert. Das kann heißen, dass das Paket fehlt, dass es abgelöst wurde oder nur aus einer anderen Quelle verfügbar ist. E: Für Paket »pigpio« existiert kein Installationskandidat. + return 100 + echo FAILED FAILED + return 1 + bashrc_copy ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:05_CEST [openHABian] Adding slightly tuned bash configuration files to system... ' 2021-09-26_15:04:05_CEST [openHABian] Adding slightly tuned bash configuration files to system... + cp /opt/openhabian/includes/bash.bashrc /etc/bash.bashrc + cp /opt/openhabian/includes/bashrc-root /root/.bashrc + cp /opt/openhabian/includes/bash_profile /home/openhabian/.bash_profile + chown openhabian:openhabian /home/openhabian/.bash_profile + echo OK OK + vimrc_copy ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:05_CEST [openHABian] Adding slightly tuned vim configuration file to system... ' 2021-09-26_15:04:05_CEST [openHABian] Adding slightly tuned vim configuration file to system... + cp /opt/openhabian/includes/vimrc /etc/vim/vimrc + echo OK OK + firemotd_setup + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + running_on_github + [[ -n '' ]] + return 1 + local firemotdDir=/opt/FireMotD + local targetDir=/etc/systemd/system/ + dpkg -s bc sysstat jq moreutils make + firemotd_download /opt ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:05_CEST [openHABian] Downloading FireMotD... ' 2021-09-26_15:04:05_CEST [openHABian] Downloading FireMotD... + [[ -d /opt/FireMotD ]] + cond_echo '\nFresh Installation... ' + [[ -z '' ]] + echo -e '\033[33;01m\nFresh Installation... \033[39;49;00m'  Fresh Installation...  + cond_redirect git clone https://github.com/OutsideIT/FireMotD.git /opt/FireMotD + [[ -n '' ]] + echo -e '\n\033[90;01m$ git clone https://github.com/OutsideIT/FireMotD.git /opt/FireMotD \033[39;49;00m' $ git clone https://github.com/OutsideIT/FireMotD.git /opt/FireMotD  + git clone https://github.com/OutsideIT/FireMotD.git /opt/FireMotD Klone nach '/opt/FireMotD' ... remote: Enumerating objects: 1377, done. remote: Counting objects: 0% (1/183) remote: Counting objects: 1% (2/183) remote: Counting objects: 2% (4/183) remote: Counting objects: 3% (6/183) remote: Counting objects: 4% (8/183) remote: Counting objects: 5% (10/183) remote: Counting objects: 6% (11/183) remote: Counting objects: 7% (13/183) remote: Counting objects: 8% (15/183) remote: Counting objects: 9% (17/183) remote: Counting objects: 10% (19/183) remote: Counting objects: 11% (21/183) remote: Counting objects: 12% (22/183) remote: Counting objects: 13% (24/183) remote: Counting objects: 14% (26/183) remote: Counting objects: 15% (28/183) remote: Counting objects: 16% (30/183) remote: Counting objects: 17% (32/183) remote: Counting objects: 18% (33/183) remote: Counting objects: 19% (35/183) remote: Counting objects: 20% (37/183) remote: Counting objects: 21% (39/183) remote: Counting objects: 22% (41/183) remote: Counting objects: 23% (43/183) remote: Counting objects: 24% (44/183) remote: Counting objects: 25% (46/183) remote: Counting objects: 26% (48/183) remote: Counting objects: 27% (50/183) remote: Counting objects: 28% (52/183) remote: Counting objects: 29% (54/183) remote: Counting objects: 30% (55/183) remote: Counting objects: 31% (57/183) remote: Counting objects: 32% (59/183) remote: Counting objects: 33% (61/183) remote: Counting objects: 34% (63/183) remote: Counting objects: 35% (65/183) remote: Counting objects: 36% (66/183) remote: Counting objects: 37% (68/183) remote: Counting objects: 38% (70/183) remote: Counting objects: 39% (72/183) remote: Counting objects: 40% (74/183) remote: Counting objects: 41% (76/183) remote: Counting objects: 42% (77/183) remote: Counting objects: 43% (79/183) remote: Counting objects: 44% (81/183) remote: Counting objects: 45% (83/183) remote: Counting objects: 46% (85/183) remote: Counting objects: 47% (87/183) remote: Counting objects: 48% (88/183) remote: Counting objects: 49% (90/183) remote: Counting objects: 50% (92/183) remote: Counting objects: 51% (94/183) remote: Counting objects: 52% (96/183) remote: Counting objects: 53% (97/183) remote: Counting objects: 54% (99/183) remote: Counting objects: 55% (101/183) remote: Counting objects: 56% (103/183) remote: Counting objects: 57% (105/183) remote: Counting objects: 58% (107/183) remote: Counting objects: 59% (108/183) remote: Counting objects: 60% (110/183) remote: Counting objects: 61% (112/183) remote: Counting objects: 62% (114/183) remote: Counting objects: 63% (116/183) remote: Counting objects: 64% (118/183) remote: Counting objects: 65% (119/183) remote: Counting objects: 66% (121/183) remote: Counting objects: 67% (123/183) remote: Counting objects: 68% (125/183) remote: Counting objects: 69% (127/183) remote: Counting objects: 70% (129/183) remote: Counting objects: 71% (130/183) remote: Counting objects: 72% (132/183) remote: Counting objects: 73% (134/183) remote: Counting objects: 74% (136/183) remote: Counting objects: 75% (138/183) remote: Counting objects: 76% (140/183) remote: Counting objects: 77% (141/183) remote: Counting objects: 78% (143/183) remote: Counting objects: 79% (145/183) remote: Counting objects: 80% (147/183) remote: Counting objects: 81% (149/183) remote: Counting objects: 82% (151/183) remote: Counting objects: 83% (152/183) remote: Counting objects: 84% (154/183) remote: Counting objects: 85% (156/183) remote: Counting objects: 86% (158/183) remote: Counting objects: 87% (160/183) remote: Counting objects: 88% (162/183) remote: Counting objects: 89% (163/183) remote: Counting objects: 90% (165/183) remote: Counting objects: 91% (167/183) remote: Counting objects: 92% (169/183) remote: Counting objects: 93% (171/183) remote: Counting objects: 94% (173/183) remote: Counting objects: 95% (174/183) remote: Counting objects: 96% (176/183) remote: Counting objects: 97% (178/183) remote: Counting objects: 98% (180/183) remote: Counting objects: 99% (182/183) remote: Counting objects: 100% (183/183) remote: Counting objects: 100% (183/183), done. remote: Compressing objects: 1% (1/87) remote: Compressing objects: 2% (2/87) remote: Compressing objects: 3% (3/87) remote: Compressing objects: 4% (4/87) remote: Compressing objects: 5% (5/87) remote: Compressing objects: 6% (6/87) remote: Compressing objects: 8% (7/87) remote: Compressing objects: 9% (8/87) remote: Compressing objects: 10% (9/87) remote: Compressing objects: 11% (10/87) remote: Compressing objects: 12% (11/87) remote: Compressing objects: 13% (12/87) remote: Compressing objects: 14% (13/87) remote: Compressing objects: 16% (14/87) remote: Compressing objects: 17% (15/87) remote: Compressing objects: 18% (16/87) remote: Compressing objects: 19% (17/87) remote: Compressing objects: 20% (18/87) remote: Compressing objects: 21% (19/87) remote: Compressing objects: 22% (20/87) remote: Compressing objects: 24% (21/87) remote: Compressing objects: 25% (22/87) remote: Compressing objects: 26% (23/87) remote: Compressing objects: 27% (24/87) remote: Compressing objects: 28% (25/87) remote: Compressing objects: 29% (26/87) remote: Compressing objects: 31% (27/87) remote: Compressing objects: 32% (28/87) remote: Compressing objects: 33% (29/87) remote: Compressing objects: 34% (30/87) remote: Compressing objects: 35% (31/87) remote: Compressing objects: 36% (32/87) remote: Compressing objects: 37% (33/87) remote: Compressing objects: 39% (34/87) remote: Compressing objects: 40% (35/87) remote: Compressing objects: 41% (36/87) remote: Compressing objects: 42% (37/87) remote: Compressing objects: 43% (38/87) remote: Compressing objects: 44% (39/87) remote: Compressing objects: 45% (40/87) remote: Compressing objects: 47% (41/87) remote: Compressing objects: 48% (42/87) remote: Compressing objects: 49% (43/87) remote: Compressing objects: 50% (44/87) remote: Compressing objects: 51% (45/87) remote: Compressing objects: 52% (46/87) remote: Compressing objects: 54% (47/87) remote: Compressing objects: 55% (48/87) remote: Compressing objects: 56% (49/87) remote: Compressing objects: 57% (50/87) remote: Compressing objects: 58% (51/87) remote: Compressing objects: 59% (52/87) remote: Compressing objects: 60% (53/87) remote: Compressing objects: 62% (54/87) remote: Compressing objects: 63% (55/87) remote: Compressing objects: 64% (56/87) remote: Compressing objects: 65% (57/87) remote: Compressing objects: 66% (58/87) remote: Compressing objects: 67% (59/87) remote: Compressing objects: 68% (60/87) remote: Compressing objects: 70% (61/87) remote: Compressing objects: 71% (62/87) remote: Compressing objects: 72% (63/87) remote: Compressing objects: 73% (64/87) remote: Compressing objects: 74% (65/87) remote: Compressing objects: 75% (66/87) remote: Compressing objects: 77% (67/87) remote: Compressing objects: 78% (68/87) remote: Compressing objects: 79% (69/87) remote: Compressing objects: 80% (70/87) remote: Compressing objects: 81% (71/87) remote: Compressing objects: 82% (72/87) remote: Compressing objects: 83% (73/87) remote: Compressing objects: 85% (74/87) remote: Compressing objects: 86% (75/87) remote: Compressing objects: 87% (76/87) remote: Compressing objects: 88% (77/87) remote: Compressing objects: 89% (78/87) remote: Compressing objects: 90% (79/87) remote: Compressing objects: 91% (80/87) remote: Compressing objects: 93% (81/87) remote: Compressing objects: 94% (82/87) remote: Compressing objects: 95% (83/87) remote: Compressing objects: 96% (84/87) remote: Compressing objects: 97% (85/87) remote: Compressing objects: 98% (86/87) remote: Compressing objects: 100% (87/87) remote: Compressing objects: 100% (87/87), done. Empfange Objekte: 0% (1/1377) Empfange Objekte: 1% (14/1377) Empfange Objekte: 2% (28/1377) Empfange Objekte: 3% (42/1377) Empfange Objekte: 4% (56/1377) Empfange Objekte: 5% (69/1377) Empfange Objekte: 6% (83/1377) Empfange Objekte: 7% (97/1377) Empfange Objekte: 8% (111/1377) Empfange Objekte: 9% (124/1377) Empfange Objekte: 10% (138/1377) Empfange Objekte: 11% (152/1377) Empfange Objekte: 12% (166/1377) Empfange Objekte: 13% (180/1377) Empfange Objekte: 14% (193/1377) Empfange Objekte: 15% (207/1377) Empfange Objekte: 16% (221/1377) Empfange Objekte: 17% (235/1377) Empfange Objekte: 18% (248/1377) Empfange Objekte: 19% (262/1377) Empfange Objekte: 20% (276/1377) Empfange Objekte: 21% (290/1377) Empfange Objekte: 22% (303/1377) Empfange Objekte: 23% (317/1377) Empfange Objekte: 24% (331/1377) Empfange Objekte: 25% (345/1377) Empfange Objekte: 26% (359/1377) Empfange Objekte: 27% (372/1377) Empfange Objekte: 28% (386/1377) Empfange Objekte: 29% (400/1377) Empfange Objekte: 30% (414/1377) Empfange Objekte: 31% (427/1377) Empfange Objekte: 32% (441/1377) Empfange Objekte: 33% (455/1377) Empfange Objekte: 34% (469/1377) Empfange Objekte: 35% (482/1377) Empfange Objekte: 36% (496/1377) Empfange Objekte: 37% (510/1377) Empfange Objekte: 38% (524/1377) Empfange Objekte: 39% (538/1377) Empfange Objekte: 40% (551/1377) Empfange Objekte: 41% (565/1377) Empfange Objekte: 42% (579/1377) Empfange Objekte: 43% (593/1377) Empfange Objekte: 44% (606/1377), 2.98 MiB | 5.95 MiB/s Empfange Objekte: 44% (612/1377), 6.11 MiB | 6.10 MiB/s Empfange Objekte: 45% (620/1377), 9.12 MiB | 6.08 MiB/s Empfange Objekte: 45% (620/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 46% (634/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 47% (648/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 48% (661/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 49% (675/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 50% (689/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 51% (703/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 52% (717/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 53% (730/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 54% (744/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 55% (758/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 56% (772/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 57% (785/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 58% (799/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 59% (813/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 60% (827/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 61% (840/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 62% (854/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 63% (868/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 64% (882/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 65% (896/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 66% (909/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 67% (923/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 68% (937/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 69% (951/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 70% (964/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 71% (978/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 72% (992/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 73% (1006/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 74% (1019/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 75% (1033/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 76% (1047/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 77% (1061/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 78% (1075/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 79% (1088/1377), 12.24 MiB | 6.12 MiB/s Empfange Objekte: 80% (1102/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 81% (1116/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 82% (1130/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 83% (1143/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 84% (1157/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 85% (1171/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 86% (1185/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 87% (1198/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 88% (1212/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 89% (1226/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 90% (1240/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 91% (1254/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 92% (1267/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 93% (1281/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 94% (1295/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 95% (1309/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 96% (1322/1377), 15.32 MiB | 6.12 MiB/s remote: Total 1377 (delta 146), reused 126 (delta 92), pack-reused 1194 Empfange Objekte: 97% (1336/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 98% (1350/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 99% (1364/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 100% (1377/1377), 15.32 MiB | 6.12 MiB/s Empfange Objekte: 100% (1377/1377), 15.52 MiB | 6.11 MiB/s, fertig. Löse Unterschiede auf: 0% (0/858) Löse Unterschiede auf: 1% (9/858) Löse Unterschiede auf: 2% (18/858) Löse Unterschiede auf: 3% (26/858) Löse Unterschiede auf: 4% (35/858) Löse Unterschiede auf: 5% (43/858) Löse Unterschiede auf: 6% (52/858) Löse Unterschiede auf: 7% (61/858) Löse Unterschiede auf: 8% (69/858) Löse Unterschiede auf: 9% (78/858) Löse Unterschiede auf: 10% (86/858) Löse Unterschiede auf: 11% (95/858) Löse Unterschiede auf: 12% (103/858) Löse Unterschiede auf: 13% (112/858) Löse Unterschiede auf: 14% (121/858) Löse Unterschiede auf: 15% (129/858) Löse Unterschiede auf: 16% (138/858) Löse Unterschiede auf: 17% (146/858) Löse Unterschiede auf: 18% (155/858) Löse Unterschiede auf: 19% (164/858) Löse Unterschiede auf: 20% (172/858) Löse Unterschiede auf: 21% (181/858) Löse Unterschiede auf: 22% (189/858) Löse Unterschiede auf: 23% (198/858) Löse Unterschiede auf: 24% (206/858) Löse Unterschiede auf: 25% (215/858) Löse Unterschiede auf: 26% (224/858) Löse Unterschiede auf: 27% (232/858) Löse Unterschiede auf: 28% (241/858) Löse Unterschiede auf: 29% (249/858) Löse Unterschiede auf: 30% (258/858) Löse Unterschiede auf: 31% (266/858) Löse Unterschiede auf: 32% (275/858) Löse Unterschiede auf: 33% (284/858) Löse Unterschiede auf: 34% (292/858) Löse Unterschiede auf: 35% (301/858) Löse Unterschiede auf: 36% (309/858) Löse Unterschiede auf: 37% (318/858) Löse Unterschiede auf: 38% (327/858) Löse Unterschiede auf: 39% (335/858) Löse Unterschiede auf: 40% (344/858) Löse Unterschiede auf: 41% (352/858) Löse Unterschiede auf: 42% (361/858) Löse Unterschiede auf: 43% (369/858) Löse Unterschiede auf: 44% (378/858) Löse Unterschiede auf: 45% (387/858) Löse Unterschiede auf: 46% (395/858) Löse Unterschiede auf: 47% (404/858) Löse Unterschiede auf: 48% (412/858) Löse Unterschiede auf: 49% (421/858) Löse Unterschiede auf: 50% (429/858) Löse Unterschiede auf: 51% (438/858) Löse Unterschiede auf: 52% (447/858) Löse Unterschiede auf: 53% (455/858) Löse Unterschiede auf: 54% (464/858) Löse Unterschiede auf: 55% (472/858) Löse Unterschiede auf: 56% (481/858) Löse Unterschiede auf: 57% (490/858) Löse Unterschiede auf: 58% (498/858) Löse Unterschiede auf: 59% (507/858) Löse Unterschiede auf: 60% (515/858) Löse Unterschiede auf: 61% (524/858) Löse Unterschiede auf: 62% (532/858) Löse Unterschiede auf: 63% (541/858) Löse Unterschiede auf: 64% (550/858) Löse Unterschiede auf: 65% (558/858) Löse Unterschiede auf: 66% (567/858) Löse Unterschiede auf: 67% (575/858) Löse Unterschiede auf: 68% (584/858) Löse Unterschiede auf: 69% (593/858) Löse Unterschiede auf: 70% (601/858) Löse Unterschiede auf: 71% (610/858) Löse Unterschiede auf: 72% (618/858) Löse Unterschiede auf: 73% (627/858) Löse Unterschiede auf: 74% (635/858) Löse Unterschiede auf: 75% (644/858) Löse Unterschiede auf: 76% (653/858) Löse Unterschiede auf: 77% (661/858) Löse Unterschiede auf: 78% (670/858) Löse Unterschiede auf: 79% (678/858) Löse Unterschiede auf: 80% (687/858) Löse Unterschiede auf: 81% (695/858) Löse Unterschiede auf: 82% (704/858) Löse Unterschiede auf: 83% (713/858) Löse Unterschiede auf: 84% (721/858) Löse Unterschiede auf: 85% (730/858) Löse Unterschiede auf: 86% (738/858) Löse Unterschiede auf: 87% (747/858) Löse Unterschiede auf: 88% (756/858) Löse Unterschiede auf: 89% (764/858) Löse Unterschiede auf: 90% (773/858) Löse Unterschiede auf: 91% (781/858) Löse Unterschiede auf: 92% (790/858) Löse Unterschiede auf: 93% (798/858) Löse Unterschiede auf: 94% (807/858) Löse Unterschiede auf: 95% (816/858) Löse Unterschiede auf: 96% (824/858) Löse Unterschiede auf: 97% (833/858) Löse Unterschiede auf: 98% (841/858) Löse Unterschiede auf: 99% (850/858) Löse Unterschiede auf: 100% (858/858) Löse Unterschiede auf: 100% (858/858), fertig. + return 0 + echo OK OK ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:08_CEST [openHABian] Installing FireMotD... ' 2021-09-26_15:04:08_CEST [openHABian] Installing FireMotD... + cond_redirect make --always-make --directory=/opt/FireMotD install + [[ -n '' ]] + echo -e '\n\033[90;01m$ make --always-make --directory=/opt/FireMotD install \033[39;49;00m' $ make --always-make --directory=/opt/FireMotD install  + make --always-make --directory=/opt/FireMotD install make: Verzeichnis „/opt/FireMotD“ wird betreten cp FireMotD /usr/local/bin/FireMotD chmod 755 /usr/local/bin/FireMotD mkdir -p /usr/share/firemotd/data mkdir -p /usr/share/firemotd/templates mkdir -p /usr/share/firemotd/themes mkdir -p /usr/share/firemotd/cache cp templates/* /usr/share/firemotd/templates cp themes/* /usr/share/firemotd/themes make: Verzeichnis „/opt/FireMotD“ wird verlassen + return 0 + cond_redirect make --always-make --directory=/opt/FireMotD bash_completion + [[ -n '' ]] + echo -e '\n\033[90;01m$ make --always-make --directory=/opt/FireMotD bash_completion \033[39;49;00m' $ make --always-make --directory=/opt/FireMotD bash_completion  + make --always-make --directory=/opt/FireMotD bash_completion make: Verzeichnis „/opt/FireMotD“ wird betreten cp bash_completion.d/FireMotD /etc/bash_completion.d/FireMotD make: Verzeichnis „/opt/FireMotD“ wird verlassen + return 0 + echo OK OK ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:08_CEST [openHABian] Generating FireMotD theme... ' 2021-09-26_15:04:08_CEST [openHABian] Generating FireMotD theme... + cond_redirect FireMotD -S -d -D all + [[ -n '' ]] + echo -e '\n\033[90;01m$ FireMotD -S -d -D all \033[39;49;00m' $ FireMotD -S -d -D all  + FireMotD -S -d -D all 2021-09-26 15:04:08,665: FireMotD: Info: Debug mode 2021-09-26 15:04:08,670: FireMotD: Info: FireMotD action save started 2021-09-26 15:04:08,675: FireMotD: Info: Action "save" 2021-09-26 15:04:08,680: FireMotD: Info: Exportfile /usr/share/firemotd/data/FireMotD.json not found. 2021-09-26 15:04:08,686: FireMotD: Info: Template type set to all. Overwriting.. 2021-09-26 15:04:08,748: FireMotD: Info: Exploring HostIp 2021-09-26 15:04:08,875: FireMotD: Info: Exploring Release 2021-09-26 15:04:09,007: FireMotD: Info: Exploring Kernel 2021-09-26 15:04:09,125: FireMotD: Info: Exploring Platform 2021-09-26 15:04:09,269: FireMotD: Info: Exploring InstallDate 2021-09-26 15:04:09,386: FireMotD: Info: Exploring Updates 2021-09-26 15:04:12,343: FireMotD: Info: Exploring Httpd 2021-09-26 15:04:12,458: FireMotD: Info: Exploring Nginx 2021-09-26 15:04:12,574: FireMotD: Info: Exploring Mysql 2021-09-26 15:04:12,744: FireMotD: Info: Exploring Postgres 2021-09-26 15:04:12,861: FireMotD: Info: Exploring Php 2021-09-26 15:04:13,035: FireMotD: Info: Exploring Elasticsearch 2021-09-26 15:04:13,151: FireMotD: Info: Exploring Logstash 2021-09-26 15:04:13,266: FireMotD: Info: Exploring Kibana 2021-09-26 15:04:13,382: FireMotD: Info: Export system data to "/usr/share/firemotd/data/FireMotD.json" finished. 2021-09-26 15:04:13,391: FireMotD: Info: ExportFile: -rwxrw-rw- 1 root root 3206 Sep 26 15:04 /usr/share/firemotd/data/FireMotD.json 2021-09-26 15:04:13,397: FireMotD: Info: FireMotD action save finished + return 0 + cond_redirect FireMotD -G Gray + [[ -n '' ]] + echo -e '\n\033[90;01m$ FireMotD -G Gray \033[39;49;00m' $ FireMotD -G Gray  + FireMotD -G Gray + return 0 + echo OK OK + grep -qs FireMotD /home/openhabian/.bash_profile ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:22_CEST [openHABian] Setting up FireMotD apt updates count service... ' 2021-09-26_15:04:22_CEST [openHABian] Setting up FireMotD apt updates count service... + cond_echo '\nMake FireMotD check for new updates every night... ' + [[ -z '' ]] + echo -e '\033[33;01m\nMake FireMotD check for new updates every night... \033[39;49;00m'  Make FireMotD check for new updates every night...  + cond_redirect install -m 644 /opt/openhabian/includes/firemotd.service /opt/openhabian/includes/firemotd.timer /etc/systemd/system/ + [[ -n '' ]] + echo -e '\n\033[90;01m$ install -m 644 /opt/openhabian/includes/firemotd.service /opt/openhabian/includes/firemotd.timer /etc/systemd/system/ \033[39;49;00m' $ install -m 644 /opt/openhabian/includes/firemotd.service /opt/openhabian/includes/firemotd.timer /etc/systemd/system/  + install -m 644 /opt/openhabian/includes/firemotd.service /opt/openhabian/includes/firemotd.timer /etc/systemd/system/ + return 0 + cond_redirect systemctl -q daemon-reload + cond_redirect systemctl enable --now firemotd.timer + echo 'FAILED (service enable)' FAILED (service enable) + return 1 + java_install_or_update Zulu11-64 + local branch ++ git -C /opt/openhabian rev-parse --abbrev-ref HEAD + branch=openHAB3 ++ command -v java + [[ -x '' ]] ++ command -v java + [[ -x '' ]] + [[ Zulu11-32 == \Z\u\l\u\1\1\-\6\4 ]] + [[ Zulu11-64 == \A\d\o\p\t\1\1 ]] + [[ Zulu11-64 != \A\d\o\p\t\1\1 ]] ++ java -version + [[ /opt/openhabian/functions/java-jre.bash: Zeile 24: java: Kommando nicht gefunden. == *\A\d\o\p\t\O\p\e\n\J\D\K* ]] + [[ Zulu11-64 == \Z\u\l\u\1\1\-\6\4 ]] + is_aarch64 + [[ amd64 == \a\a\r\c\h\6\4 ]] + [[ amd64 == \a\r\m\6\4 ]] + case "$(uname -m)" in ++ uname -m + return 1 + is_x86_64 + [[ amd64 == \x\8\6\_\6\4 ]] + [[ amd64 == \a\m\d\6\4 ]] + return 0 ++ getconf LONG_BIT + [[ 64 == 64 ]] + is_x86_64 + [[ amd64 == \x\8\6\_\6\4 ]] + [[ amd64 == \a\m\d\6\4 ]] + return 0 + java_zulu_enterprise_apt + add_keys https://www.azul.com/files/0xB1998361219BD9C9.txt + local repoKey ++ mktemp /tmp/openhabian.XXXXX + repoKey=/tmp/openhabian.l8VzW ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:23_CEST [openHABian] Adding required keys to apt... ' 2021-09-26_15:04:23_CEST [openHABian] Adding required keys to apt... + cond_redirect wget -qO /tmp/openhabian.l8VzW https://www.azul.com/files/0xB1998361219BD9C9.txt + [[ -n '' ]] + echo -e '\n\033[90;01m$ wget -qO /tmp/openhabian.l8VzW https://www.azul.com/files/0xB1998361219BD9C9.txt \033[39;49;00m' $ wget -qO /tmp/openhabian.l8VzW https://www.azul.com/files/0xB1998361219BD9C9.txt  + wget -qO /tmp/openhabian.l8VzW https://www.azul.com/files/0xB1998361219BD9C9.txt + return 0 + cond_redirect apt-key add /tmp/openhabian.l8VzW + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-key add /tmp/openhabian.l8VzW \033[39;49;00m' $ apt-key add /tmp/openhabian.l8VzW  + apt-key add /tmp/openhabian.l8VzW Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + return 0 + echo OK OK + rm -f /tmp/openhabian.l8VzW ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:24_CEST [openHABian] Adding Zulu repository to apt... ' 2021-09-26_15:04:24_CEST [openHABian] Adding Zulu repository to apt... + echo 'deb http://repos.azulsystems.com/debian stable main' + cond_redirect apt-get update + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get update \033[39;49;00m' $ apt-get update  + apt-get update 0% [Wird verarbeitet] OK:1 http://security.debian.org bullseye-security InRelease 0% [Warten auf Kopfzeilen] [Verbindung mit repos.azulsystems.com] OK:2 http://ftp.debian.org/debian bullseye InRelease 0% [Warten auf Kopfzeilen] [Verbindung mit repos.azulsystems.com] OK:3 http://ftp.debian.org/debian bullseye-updates InRelease 0% [Verbindung mit repos.azulsystems.com] Ign:4 http://repos.azulsystems.com/debian stable InRelease 0% [Wird verarbeitet] Holen:5 http://repos.azulsystems.com/debian stable Release [8.606 B] 0% [5 Release 7.140 B/8.606 B 83%] 0% [Wird verarbeitet] Holen:6 http://repos.azulsystems.com/debian stable Release.gpg [833 B] 0% [Wird verarbeitet] 0% [Wird verarbeitet] 0% [Wird verarbeitet] 0% [Wird verarbeitet] 43% [Wird verarbeitet] Holen:7 http://repos.azulsystems.com/debian stable/main amd64 Packages [22,1 kB] 43% [7 Packages 0 B/22,1 kB 0%] 100% [Wird verarbeitet] 100% [7 Packages store 0 B] 100% [Wird verarbeitet] Es wurden 31,6 kB in 1 s geholt (37,6 kB/s). Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 43% Paketlisten werden gelesen… 53% Paketlisten werden gelesen… 53% Paketlisten werden gelesen… 53% Paketlisten werden gelesen… 53% Paketlisten werden gelesen… 62% Paketlisten werden gelesen… 62% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… Fertig + return 0 + echo OK OK + openhab_is_running + openhab_is_installed + openhab2_is_installed ++ grep Status ++ dpkg -s openhab2 ++ cut '-d ' -f2 + [[ '' == \i\n\s\t\a\l\l ]] + return 1 + openhab3_is_installed ++ grep Status ++ dpkg -s openhab ++ cut '-d ' -f2 + [[ '' == \i\n\s\t\a\l\l ]] + return 1 + return 1 + return 1 + dpkg -s zulu-11 ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:04:26_CEST [openHABian] Installing Zulu 11 Enterprise 64-Bit OpenJDK... ' 2021-09-26_15:04:26_CEST [openHABian] Installing Zulu 11 Enterprise 64-Bit OpenJDK... + cond_redirect apt-get install --yes zulu-11 + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes zulu-11 \033[39;49;00m' $ apt-get install --yes zulu-11  + apt-get install --yes zulu-11 Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig Die folgenden zusätzlichen Pakete werden installiert: alsa-topology-conf alsa-ucm-conf java-common libasound2 libasound2-data zulu-repo Vorgeschlagene Pakete: default-jre libasound2-plugins alsa-utils Die folgenden NEUEN Pakete werden installiert: alsa-topology-conf alsa-ucm-conf java-common libasound2 libasound2-data zulu-11 zulu-repo 0 aktualisiert, 7 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 200 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 334 MB Plattenplatz zusätzlich benutzt. 0% [Wird verarbeitet] Holen:1 http://ftp.debian.org/debian bullseye/main amd64 alsa-topology-conf all 1.2.4-1 [12,8 kB] 0% [1 alsa-topology-conf 0 B/12,8 kB 0%] [Warten auf Kopfzeilen] 3% [Warten auf Kopfzeilen] Holen:2 http://repos.azulsystems.com/debian stable/main amd64 zulu-repo all 1.0.0-2 [2.664 B] 6% [Warten auf Kopfzeilen] [Warten auf Kopfzeilen] Holen:3 http://ftp.debian.org/debian bullseye/main amd64 libasound2-data all 1.2.4-1.1 [38,2 kB] 6% [3 libasound2-data 0 B/38,2 kB 0%] [Warten auf Kopfzeilen] Holen:4 http://repos.azulsystems.com/debian stable/main amd64 zulu-11 amd64 11.41+23-2 [200 MB] 6% [3 libasound2-data 29,0 kB/38,2 kB 76%] [4 zulu-11 0 B/200 MB 0%] 9% [4 zulu-11 38,6 kB/200 MB 0%] Holen:5 http://ftp.debian.org/debian bullseye/main amd64 libasound2 amd64 1.2.4-1.1 [356 kB] 9% [5 libasound2 0 B/356 kB 0%] [4 zulu-11 38,6 kB/200 MB 0%] 12% [4 zulu-11 300 kB/200 MB 0%] Holen:6 http://ftp.debian.org/debian bullseye/main amd64 alsa-ucm-conf all 1.2.4-2 [28,1 kB] 12% [6 alsa-ucm-conf 0 B/28,1 kB 0%] [4 zulu-11 300 kB/200 MB 0%] 15% [4 zulu-11 310 kB/200 MB 0%] Holen:7 http://ftp.debian.org/debian bullseye/main amd64 java-common all 0.72 [14,5 kB] 15% [7 java-common 0 B/14,5 kB 0%] [4 zulu-11 313 kB/200 MB 0%] 17% [4 zulu-11 340 kB/200 MB 0%] 19% [4 zulu-11 3.080 kB/200 MB 2%] 20% [4 zulu-11 6.417 kB/200 MB 3%] 21% [4 zulu-11 9.758 kB/200 MB 5%] 23% [4 zulu-11 13,1 MB/200 MB 7%] 24% [4 zulu-11 16,4 MB/200 MB 8%] 25% [4 zulu-11 19,8 MB/200 MB 10%] 27% [4 zulu-11 23,1 MB/200 MB 12%] 28% [4 zulu-11 25,7 MB/200 MB 13%] 29% [4 zulu-11 29,1 MB/200 MB 15%] 30% [4 zulu-11 32,4 MB/200 MB 16%] 32% [4 zulu-11 35,8 MB/200 MB 18%] 33% [4 zulu-11 39,1 MB/200 MB 20%] 6.348 kB/s 25 s 34% [4 zulu-11 42,4 MB/200 MB 21%] 6.348 kB/s 24 s 36% [4 zulu-11 45,8 MB/200 MB 23%] 6.348 kB/s 24 s 37% [4 zulu-11 48,9 MB/200 MB 24%] 6.348 kB/s 23 s 38% [4 zulu-11 52,2 MB/200 MB 26%] 6.348 kB/s 23 s 39% [4 zulu-11 55,5 MB/200 MB 28%] 6.348 kB/s 22 s 41% [4 zulu-11 58,9 MB/200 MB 29%] 6.348 kB/s 22 s 42% [4 zulu-11 62,2 MB/200 MB 31%] 6.348 kB/s 21 s 43% [4 zulu-11 65,5 MB/200 MB 33%] 6.348 kB/s 21 s 44% [4 zulu-11 66,6 MB/200 MB 33%] 6.348 kB/s 20 s 45% [4 zulu-11 69,0 MB/200 MB 35%] 6.348 kB/s 20 s 46% [4 zulu-11 72,0 MB/200 MB 36%] 6.348 kB/s 20 s 47% [4 zulu-11 75,3 MB/200 MB 38%] 6.021 kB/s 20 s 49% [4 zulu-11 78,6 MB/200 MB 39%] 6.021 kB/s 20 s 50% [4 zulu-11 81,7 MB/200 MB 41%] 6.021 kB/s 19 s 51% [4 zulu-11 84,9 MB/200 MB 42%] 6.021 kB/s 19 s 53% [4 zulu-11 88,1 MB/200 MB 44%] 6.021 kB/s 18 s 54% [4 zulu-11 91,4 MB/200 MB 46%] 6.021 kB/s 18 s 55% [4 zulu-11 94,8 MB/200 MB 47%] 6.021 kB/s 17 s 57% [4 zulu-11 98,1 MB/200 MB 49%] 6.021 kB/s 16 s 58% [4 zulu-11 101 MB/200 MB 51%] 6.021 kB/s 16 s 59% [4 zulu-11 105 MB/200 MB 52%] 6.021 kB/s 15 s 60% [4 zulu-11 108 MB/200 MB 54%] 6.021 kB/s 15 s 62% [4 zulu-11 111 MB/200 MB 56%] 6.021 kB/s 14 s 63% [4 zulu-11 115 MB/200 MB 57%] 6.546 kB/s 13 s 64% [4 zulu-11 118 MB/200 MB 59%] 6.546 kB/s 12 s 66% [4 zulu-11 121 MB/200 MB 61%] 6.546 kB/s 12 s 67% [4 zulu-11 124 MB/200 MB 62%] 6.546 kB/s 11 s 68% [4 zulu-11 128 MB/200 MB 64%] 6.546 kB/s 11 s 70% [4 zulu-11 131 MB/200 MB 65%] 6.546 kB/s 10 s 71% [4 zulu-11 133 MB/200 MB 67%] 6.546 kB/s 10 s 72% [4 zulu-11 136 MB/200 MB 68%] 6.546 kB/s 9 s 73% [4 zulu-11 140 MB/200 MB 70%] 6.546 kB/s 9 s 74% [4 zulu-11 143 MB/200 MB 71%] 6.546 kB/s 8 s 76% [4 zulu-11 146 MB/200 MB 73%] 6.546 kB/s 8 s 77% [4 zulu-11 149 MB/200 MB 75%] 6.546 kB/s 7 s 78% [4 zulu-11 153 MB/200 MB 76%] 6.324 kB/s 7 s 80% [4 zulu-11 156 MB/200 MB 78%] 6.324 kB/s 6 s 81% [4 zulu-11 159 MB/200 MB 80%] 6.324 kB/s 6 s 82% [4 zulu-11 163 MB/200 MB 81%] 6.324 kB/s 5 s 84% [4 zulu-11 166 MB/200 MB 83%] 6.324 kB/s 5 s 85% [4 zulu-11 168 MB/200 MB 84%] 6.324 kB/s 4 s 86% [4 zulu-11 171 MB/200 MB 86%] 6.324 kB/s 4 s 87% [4 zulu-11 175 MB/200 MB 87%] 6.324 kB/s 3 s 88% [4 zulu-11 178 MB/200 MB 89%] 6.324 kB/s 3 s 90% [4 zulu-11 181 MB/200 MB 91%] 6.324 kB/s 2 s 91% [4 zulu-11 185 MB/200 MB 92%] 6.324 kB/s 2 s 92% [4 zulu-11 188 MB/200 MB 94%] 6.324 kB/s 1 s 94% [4 zulu-11 191 MB/200 MB 96%] 6.453 kB/s 1 s 95% [4 zulu-11 195 MB/200 MB 97%] 6.453 kB/s 0 s 96% [4 zulu-11 198 MB/200 MB 99%] 6.453 kB/s 0 s 100% [Wird verarbeitet] 6.453 kB/s 0 s Es wurden 200 MB in 32 s geholt (6.338 kB/s). Vormals nicht ausgewähltes Paket alsa-topology-conf wird gewählt. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 33462 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../0-alsa-topology-conf_1.2.4-1_all.deb ... Entpacken von alsa-topology-conf (1.2.4-1) ... Vormals nicht ausgewähltes Paket libasound2-data wird gewählt. Vorbereitung zum Entpacken von .../1-libasound2-data_1.2.4-1.1_all.deb ... Entpacken von libasound2-data (1.2.4-1.1) ... Vormals nicht ausgewähltes Paket libasound2:amd64 wird gewählt. Vorbereitung zum Entpacken von .../2-libasound2_1.2.4-1.1_amd64.deb ... Entpacken von libasound2:amd64 (1.2.4-1.1) ... Vormals nicht ausgewähltes Paket alsa-ucm-conf wird gewählt. Vorbereitung zum Entpacken von .../3-alsa-ucm-conf_1.2.4-2_all.deb ... Entpacken von alsa-ucm-conf (1.2.4-2) ... Vormals nicht ausgewähltes Paket java-common wird gewählt. Vorbereitung zum Entpacken von .../4-java-common_0.72_all.deb ... Entpacken von java-common (0.72) ... Vormals nicht ausgewähltes Paket zulu-repo wird gewählt. Vorbereitung zum Entpacken von .../5-zulu-repo_1.0.0-2_all.deb ... Entpacken von zulu-repo (1.0.0-2) ... Vormals nicht ausgewähltes Paket zulu-11 wird gewählt. Vorbereitung zum Entpacken von .../6-zulu-11_11.41+23-2_amd64.deb ... Entpacken von zulu-11 (11.41+23-2) ... java-common (0.72) wird eingerichtet ... libasound2-data (1.2.4-1.1) wird eingerichtet ... alsa-topology-conf (1.2.4-1) wird eingerichtet ... libasound2:amd64 (1.2.4-1.1) wird eingerichtet ... zulu-repo (1.0.0-2) wird eingerichtet ... alsa-ucm-conf (1.2.4-2) wird eingerichtet ... zulu-11 (11.41+23-2) wird eingerichtet ... update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jaotc wird verwendet, um /usr/bin/jaotc (jaotc) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/java wird verwendet, um /usr/bin/java (java) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jfr wird verwendet, um /usr/bin/jfr (jfr) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jjs wird verwendet, um /usr/bin/jjs (jjs) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/keytool wird verwendet, um /usr/bin/keytool (keytool) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/pack200 wird verwendet, um /usr/bin/pack200 (pack200) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/rmid wird verwendet, um /usr/bin/rmid (rmid) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/rmiregistry wird verwendet, um /usr/bin/rmiregistry (rmiregistry) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/unpack200 wird verwendet, um /usr/bin/unpack200 (unpack200) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jar wird verwendet, um /usr/bin/jar (jar) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jarsigner wird verwendet, um /usr/bin/jarsigner (jarsigner) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/javac wird verwendet, um /usr/bin/javac (javac) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/javadoc wird verwendet, um /usr/bin/javadoc (javadoc) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/javap wird verwendet, um /usr/bin/javap (javap) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jcmd wird verwendet, um /usr/bin/jcmd (jcmd) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jconsole wird verwendet, um /usr/bin/jconsole (jconsole) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jdb wird verwendet, um /usr/bin/jdb (jdb) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jdeprscan wird verwendet, um /usr/bin/jdeprscan (jdeprscan) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jdeps wird verwendet, um /usr/bin/jdeps (jdeps) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jhsdb wird verwendet, um /usr/bin/jhsdb (jhsdb) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jimage wird verwendet, um /usr/bin/jimage (jimage) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jinfo wird verwendet, um /usr/bin/jinfo (jinfo) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jlink wird verwendet, um /usr/bin/jlink (jlink) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jmap wird verwendet, um /usr/bin/jmap (jmap) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jmod wird verwendet, um /usr/bin/jmod (jmod) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jps wird verwendet, um /usr/bin/jps (jps) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jrunscript wird verwendet, um /usr/bin/jrunscript (jrunscript) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jshell wird verwendet, um /usr/bin/jshell (jshell) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jstack wird verwendet, um /usr/bin/jstack (jstack) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jstat wird verwendet, um /usr/bin/jstat (jstat) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/jstatd wird verwendet, um /usr/bin/jstatd (jstatd) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/rmic wird verwendet, um /usr/bin/rmic (rmic) im automatischen Modus bereitzustellen update-alternatives: /usr/lib/jvm/zulu-11-amd64/bin/serialver wird verwendet, um /usr/bin/serialver (serialver) im automatischen Modus bereitzustellen Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für libc-bin (2.31-13) werden verarbeitet ... + return 0 + echo OK OK + openhab_is_installed + openhab2_is_installed ++ dpkg -s openhab2 ++ cut '-d ' -f2 ++ grep Status + [[ '' == \i\n\s\t\a\l\l ]] + return 1 + openhab3_is_installed ++ dpkg -s openhab ++ cut '-d ' -f2 ++ grep Status + [[ '' == \i\n\s\t\a\l\l ]] + return 1 + return 1 + java_zulu_install_crypto_extension + [[ -n '' ]] + local jdkSecurity + local policyTempLocation ++ realpath /usr/bin/java ++ sed 's|/java||' + jdkSecurity=/usr/lib/jvm/zulu-11-amd64/bin/../lib/security ++ mktemp -d /tmp/openhabian.XXXXX + policyTempLocation=/tmp/openhabian.ug2v7 ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:06_CEST [openHABian] Installing Java Zulu CEK to enable unlimited cipher strength... ' 2021-09-26_15:05:06_CEST [openHABian] Installing Java Zulu CEK to enable unlimited cipher strength... + cond_redirect mkdir -p /usr/lib/jvm/zulu-11-amd64/bin/../lib/security + [[ -n '' ]] + echo -e '\n\033[90;01m$ mkdir -p /usr/lib/jvm/zulu-11-amd64/bin/../lib/security \033[39;49;00m' $ mkdir -p /usr/lib/jvm/zulu-11-amd64/bin/../lib/security  + mkdir -p /usr/lib/jvm/zulu-11-amd64/bin/../lib/security + return 0 + cond_redirect wget -qO /tmp/openhabian.ug2v7/crypto.zip https://cdn.azul.com/zcek/bin/ZuluJCEPolicies.zip + [[ -n '' ]] + echo -e '\n\033[90;01m$ wget -qO /tmp/openhabian.ug2v7/crypto.zip https://cdn.azul.com/zcek/bin/ZuluJCEPolicies.zip \033[39;49;00m' $ wget -qO /tmp/openhabian.ug2v7/crypto.zip https://cdn.azul.com/zcek/bin/ZuluJCEPolicies.zip  + wget -qO /tmp/openhabian.ug2v7/crypto.zip https://cdn.azul.com/zcek/bin/ZuluJCEPolicies.zip + return 0 + cond_redirect unzip /tmp/openhabian.ug2v7/crypto.zip -d /tmp/openhabian.ug2v7 + [[ -n '' ]] + echo -e '\n\033[90;01m$ unzip /tmp/openhabian.ug2v7/crypto.zip -d /tmp/openhabian.ug2v7 \033[39;49;00m' $ unzip /tmp/openhabian.ug2v7/crypto.zip -d /tmp/openhabian.ug2v7  + unzip /tmp/openhabian.ug2v7/crypto.zip -d /tmp/openhabian.ug2v7 Archive: /tmp/openhabian.ug2v7/crypto.zip creating: /tmp/openhabian.ug2v7/ZuluJCEPolicies/ inflating: /tmp/openhabian.ug2v7/ZuluJCEPolicies/LICENSE inflating: /tmp/openhabian.ug2v7/ZuluJCEPolicies/README.txt inflating: /tmp/openhabian.ug2v7/ZuluJCEPolicies/DISCLAIMER inflating: /tmp/openhabian.ug2v7/ZuluJCEPolicies/local_policy.jar inflating: /tmp/openhabian.ug2v7/ZuluJCEPolicies/US_export_policy.jar + return 0 + cond_redirect cp -u /tmp/openhabian.ug2v7/ZuluJCEPolicies/local_policy.jar /tmp/openhabian.ug2v7/ZuluJCEPolicies/US_export_policy.jar /usr/lib/jvm/zulu-11-amd64/bin/../lib/security + [[ -n '' ]] + echo -e '\n\033[90;01m$ cp -u /tmp/openhabian.ug2v7/ZuluJCEPolicies/local_policy.jar /tmp/openhabian.ug2v7/ZuluJCEPolicies/US_export_policy.jar /usr/lib/jvm/zulu-11-amd64/bin/../lib/security \033[39;49;00m' $ cp -u /tmp/openhabian.ug2v7/ZuluJCEPolicies/local_policy.jar /tmp/openhabian.ug2v7/ZuluJCEPolicies/US_export_policy.jar /usr/lib/jvm/zulu-11-amd64/bin/../lib/security  + cp -u /tmp/openhabian.ug2v7/ZuluJCEPolicies/local_policy.jar /tmp/openhabian.ug2v7/ZuluJCEPolicies/US_export_policy.jar /usr/lib/jvm/zulu-11-amd64/bin/../lib/security + return 0 + echo OK OK + cond_redirect rm -rf /tmp/openhabian.ug2v7 + [[ -n '' ]] + echo -e '\n\033[90;01m$ rm -rf /tmp/openhabian.ug2v7 \033[39;49;00m' $ rm -rf /tmp/openhabian.ug2v7  + rm -rf /tmp/openhabian.ug2v7 + return 0 ++ command -v java + [[ -x /usr/bin/java ]] + cond_redirect java -version + [[ -n '' ]] + echo -e '\n\033[90;01m$ java -version \033[39;49;00m' $ java -version  + java -version openjdk version "11.0.8" 2020-07-14 LTS OpenJDK Runtime Environment Zulu11.41+23-CA (build 11.0.8+10-LTS) OpenJDK 64-Bit Server VM Zulu11.41+23-CA (build 11.0.8+10-LTS, mixed mode) + return 0 + openhab_setup openHAB3 stable + local introText + local successText + local repo + local openhabVersion + [[ openHAB3 == \o\p\e\n\H\A\B\3 ]] + ohPkgName=openhab + [[ stable == \u\n\s\t\a\b\l\e ]] + [[ stable == \s\t\a\b\l\e ]] + introText='You are about to install or change to the latest stable openHAB3 release.\n\nPlease be aware that downgrading from a newer unstable snapshot build is not officially supported. Please consult with the documentation or community forum and be sure to take a full openHAB configuration backup first!' + successText='The stable release of openHAB3 is now installed on your system.\n\nPlease test the correct behavior of your setup. You might need to adapt your configuration, if available. If you made changes to the files in '\''/var/lib/openhab'\'' they were replaced, but you can restore them from backup files next to the originals.\n\nCheck the "openHAB Release Notes" and the official announcements to learn about additons, fixes and changes.' + repo='deb https://dl.bintray.com/openhab/apt-repo2 stable main' + [[ stable == \u\n\s\t\a\b\l\e ]] + [[ stable == \s\t\a\b\l\e ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:06_CEST [openHABian] Beginning install of latest openHAB3 release (stable)... ' 2021-09-26_15:05:06_CEST [openHABian] Beginning install of latest openHAB3 release (stable)... + [[ -n '' ]] + echo OK OK + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + [[ -z '' ]] + add_keys 'https://bintray.com/user/downloadSubjectPublicKey?username=openhab' + local repoKey ++ mktemp /tmp/openhabian.XXXXX + repoKey=/tmp/openhabian.oh7Tz ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:06_CEST [openHABian] Adding required keys to apt... ' 2021-09-26_15:05:06_CEST [openHABian] Adding required keys to apt... + cond_redirect wget -qO /tmp/openhabian.oh7Tz 'https://bintray.com/user/downloadSubjectPublicKey?username=openhab' + [[ -n '' ]] + echo -e '\n\033[90;01m$ wget -qO /tmp/openhabian.oh7Tz https://bintray.com/user/downloadSubjectPublicKey?username=openhab \033[39;49;00m' $ wget -qO /tmp/openhabian.oh7Tz https://bintray.com/user/downloadSubjectPublicKey?username=openhab  + wget -qO /tmp/openhabian.oh7Tz 'https://bintray.com/user/downloadSubjectPublicKey?username=openhab' + return 8 + cond_redirect apt-key add /tmp/openhabian.oh7Tz + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-key add /tmp/openhabian.oh7Tz \033[39;49;00m' $ apt-key add /tmp/openhabian.oh7Tz  + apt-key add /tmp/openhabian.oh7Tz Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). gpg: Keine gültigen OpenPGP-Daten gefunden. + return 2 + echo FAILED FAILED + rm -f /tmp/openhabian.oh7Tz + return 1 + return 1 + vim_openhab_syntax ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:07_CEST [openHABian] Adding openHAB syntax to vim editor... ' 2021-09-26_15:05:07_CEST [openHABian] Adding openHAB syntax to vim editor... + cond_redirect mkdir -p /home/openhabian/.vim/ftdetect /home/openhabian/.vim/syntax + [[ -n '' ]] + echo -e '\n\033[90;01m$ mkdir -p /home/openhabian/.vim/ftdetect /home/openhabian/.vim/syntax \033[39;49;00m' $ mkdir -p /home/openhabian/.vim/ftdetect /home/openhabian/.vim/syntax  + mkdir -p /home/openhabian/.vim/ftdetect /home/openhabian/.vim/syntax + return 0 + cond_redirect wget -O /home/openhabian/.vim/syntax/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/syntax/openhab.vim + [[ -n '' ]] + echo -e '\n\033[90;01m$ wget -O /home/openhabian/.vim/syntax/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/syntax/openhab.vim \033[39;49;00m' $ wget -O /home/openhabian/.vim/syntax/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/syntax/openhab.vim  + wget -O /home/openhabian/.vim/syntax/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/syntax/openhab.vim --2021-09-26 15:05:07-- https://github.com/cyberkov/openhab-vim/raw/master/syntax/openhab.vim Auflösen des Hostnamens github.com (github.com)… 140.82.121.4 Verbindungsaufbau zu github.com (github.com)|140.82.121.4|:443 … verbunden. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 302 Found Platz: https://raw.githubusercontent.com/cyberkov/openhab-vim/master/syntax/openhab.vim [folgend] --2021-09-26 15:05:07-- https://raw.githubusercontent.com/cyberkov/openhab-vim/master/syntax/openhab.vim Auflösen des Hostnamens raw.githubusercontent.com (raw.githubusercontent.com)… 185.199.110.133, 185.199.109.133, 185.199.108.133, ... Verbindungsaufbau zu raw.githubusercontent.com (raw.githubusercontent.com)|185.199.110.133|:443 … verbunden. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK Länge: 6065 (5,9K) [text/plain] Wird in »/home/openhabian/.vim/syntax/openhab.vim« gespeichert. /home/openhabian/.vim/syntax/openhab 0%[ ] 0 --.-KB/s /home/openhabian/.vim/syntax/openhab 100%[=====================================================================>] 5,92K --.-KB/s in 0s 2021-09-26 15:05:08 (30,5 MB/s) - »/home/openhabian/.vim/syntax/openhab.vim« gespeichert [6065/6065] + return 0 + cond_redirect wget -O /home/openhabian/.vim/ftdetect/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/ftdetect/openhab.vim + [[ -n '' ]] + echo -e '\n\033[90;01m$ wget -O /home/openhabian/.vim/ftdetect/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/ftdetect/openhab.vim \033[39;49;00m' $ wget -O /home/openhabian/.vim/ftdetect/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/ftdetect/openhab.vim  + wget -O /home/openhabian/.vim/ftdetect/openhab.vim https://github.com/cyberkov/openhab-vim/raw/master/ftdetect/openhab.vim --2021-09-26 15:05:08-- https://github.com/cyberkov/openhab-vim/raw/master/ftdetect/openhab.vim Auflösen des Hostnamens github.com (github.com)… 140.82.121.4 Verbindungsaufbau zu github.com (github.com)|140.82.121.4|:443 … verbunden. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 302 Found Platz: https://raw.githubusercontent.com/cyberkov/openhab-vim/master/ftdetect/openhab.vim [folgend] --2021-09-26 15:05:08-- https://raw.githubusercontent.com/cyberkov/openhab-vim/master/ftdetect/openhab.vim Auflösen des Hostnamens raw.githubusercontent.com (raw.githubusercontent.com)… 185.199.110.133, 185.199.109.133, 185.199.108.133, ... Verbindungsaufbau zu raw.githubusercontent.com (raw.githubusercontent.com)|185.199.110.133|:443 … verbunden. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK Länge: 661 [text/plain] Wird in »/home/openhabian/.vim/ftdetect/openhab.vim« gespeichert. /home/openhabian/. 0%[ ] 0 --.-KB/s /home/openhabian/.vim/ftdetect/openh 100%[=====================================================================>] 661 --.-KB/s in 0s 2021-09-26 15:05:08 (29,5 MB/s) - »/home/openhabian/.vim/ftdetect/openhab.vim« gespeichert [661/661] + return 0 + chown -R openhabian:openhabian /home/openhabian/.vim + echo OK OK + nano_openhab_syntax ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:08_CEST [openHABian] Adding openHAB syntax to nano editor... ' 2021-09-26_15:05:08_CEST [openHABian] Adding openHAB syntax to nano editor... + cond_redirect wget -O /usr/share/nano/openhab.nanorc https://github.com/airix1/openhabnano/raw/master/openhab.nanorc + [[ -n '' ]] + echo -e '\n\033[90;01m$ wget -O /usr/share/nano/openhab.nanorc https://github.com/airix1/openhabnano/raw/master/openhab.nanorc \033[39;49;00m' $ wget -O /usr/share/nano/openhab.nanorc https://github.com/airix1/openhabnano/raw/master/openhab.nanorc  + wget -O /usr/share/nano/openhab.nanorc https://github.com/airix1/openhabnano/raw/master/openhab.nanorc --2021-09-26 15:05:08-- https://github.com/airix1/openhabnano/raw/master/openhab.nanorc Auflösen des Hostnamens github.com (github.com)… 140.82.121.4 Verbindungsaufbau zu github.com (github.com)|140.82.121.4|:443 … verbunden. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 302 Found Platz: https://raw.githubusercontent.com/airix1/openhabnano/master/openhab.nanorc [folgend] --2021-09-26 15:05:09-- https://raw.githubusercontent.com/airix1/openhabnano/master/openhab.nanorc Auflösen des Hostnamens raw.githubusercontent.com (raw.githubusercontent.com)… 185.199.110.133, 185.199.109.133, 185.199.108.133, ... Verbindungsaufbau zu raw.githubusercontent.com (raw.githubusercontent.com)|185.199.110.133|:443 … verbunden. HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK Länge: 2846 (2,8K) [text/plain] Wird in »/usr/share/nano/openhab.nanorc« gespeichert. /usr/share/nano/openhab.nanorc 0%[ ] 0 --.-KB/s /usr/share/nano/openhab.nanorc 100%[=====================================================================>] 2,78K --.-KB/s in 0s 2021-09-26 15:05:09 (22,2 MB/s) - »/usr/share/nano/openhab.nanorc« gespeichert [2846/2846] + return 0 + echo -e '\n## openHAB syntax\ninclude "/usr/share/nano/openhab.nanorc"' + echo OK OK + multitail_openhab_scheme ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:09_CEST [openHABian] Adding openHAB scheme to multitail... ' 2021-09-26_15:05:09_CEST [openHABian] Adding openHAB scheme to multitail... + cp /opt/openhabian/includes/multitail.openhab.conf /etc/multitail.openhab.conf + cond_redirect sed -i -e '/^.*multitail.*openhab.*$/d' /etc/multitail.conf + [[ -n '' ]] + echo -e '\n\033[90;01m$ sed -i -e /^.*multitail.*openhab.*$/d /etc/multitail.conf \033[39;49;00m' $ sed -i -e /^.*multitail.*openhab.*$/d /etc/multitail.conf  + sed -i -e '/^.*multitail.*openhab.*$/d' /etc/multitail.conf + return 0 + cond_redirect sed -i -e 's|^# misc.*$|# openHAB logs\\ninclude:/etc/multitail.openhab.conf\\n#\\n# misc|g' /etc/multitail.conf + [[ -n '' ]] + echo -e '\n\033[90;01m$ sed -i -e s|^# misc.*$|# openHAB logs\\ninclude:/etc/multitail.openhab.conf\\n#\\n# misc|g /etc/multitail.conf \033[39;49;00m' $ sed -i -e s|^# misc.*$|# openHAB logs\ninclude:/etc/multitail.openhab.conf\n#\n# misc|g /etc/multitail.conf  + sed -i -e 's|^# misc.*$|# openHAB logs\\ninclude:/etc/multitail.openhab.conf\\n#\\n# misc|g' /etc/multitail.conf + return 0 + echo OK OK + srv_bind_mounts + [[ -f /etc/ztab ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:09_CEST [openHABian] Preparing openHAB folder mounts under '\''/srv/openhab-*'\''... ' 2021-09-26_15:05:09_CEST [openHABian] Preparing openHAB folder mounts under '/srv/openhab-*'... + cond_redirect umount -q /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons + [[ -n '' ]] + echo -e '\n\033[90;01m$ umount -q /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons \033[39;49;00m' $ umount -q /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons  + umount -q /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons umount: /srv/openhab-sys: no mount point specified. umount: /srv/openhab-conf: no mount point specified. umount: /srv/openhab-userdata: no mount point specified. umount: /srv/openhab-addons: no mount point specified. + return 128 + cond_redirect rm -f '/etc/systemd/system/srv*.mount' + [[ -n '' ]] + echo -e '\n\033[90;01m$ rm -f /etc/systemd/system/srv*.mount \033[39;49;00m' $ rm -f /etc/systemd/system/srv*.mount  + rm -f '/etc/systemd/system/srv*.mount' + return 0 + cond_redirect mkdir -p /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons + [[ -n '' ]] + echo -e '\n\033[90;01m$ mkdir -p /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons \033[39;49;00m' $ mkdir -p /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons  + mkdir -p /srv/openhab-sys /srv/openhab-conf /srv/openhab-userdata /srv/openhab-addons + return 0 + cond_redirect cp /opt/openhabian/includes/srv_readme.txt /srv/README.txt + [[ -n '' ]] + echo -e '\n\033[90;01m$ cp /opt/openhabian/includes/srv_readme.txt /srv/README.txt \033[39;49;00m' $ cp /opt/openhabian/includes/srv_readme.txt /srv/README.txt  + cp /opt/openhabian/includes/srv_readme.txt /srv/README.txt + return 0 + cond_redirect chmod ugo+w /srv /srv/README.txt + [[ -n '' ]] + echo -e '\n\033[90;01m$ chmod ugo+w /srv /srv/README.txt \033[39;49;00m' $ chmod ugo+w /srv /srv/README.txt  + chmod ugo+w /srv /srv/README.txt + return 0 + cond_redirect create_mount /usr/share/openhab sys + [[ -n '' ]] + echo -e '\n\033[90;01m$ create_mount /usr/share/openhab sys \033[39;49;00m' $ create_mount /usr/share/openhab sys  + create_mount /usr/share/openhab sys + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + local destination + local mountPoint + local source + destination=sys ++ systemd-escape --path /srv/openhab-sys --suffix mount + mountPoint='srv-openhab\x2dsys.mount' + source=/usr/share/openhab ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:09_CEST [openHABian] Creating mount /usr/share/openhab in '\''/srv/openhab-sys'\''... ' 2021-09-26_15:05:09_CEST [openHABian] Creating mount /usr/share/openhab in '/srv/openhab-sys'... + sed -e 's|%SRC|/usr/share/openhab|g; s|%DEST|sys|g' /opt/openhabian/includes/srv_mount_template + cond_redirect systemctl -q daemon-reload + cond_redirect systemctl enable --now 'srv-openhab\x2dsys.mount' + [[ -n '' ]] + echo -e '\n\033[90;01m$ systemctl enable --now srv-openhab\x2dsys.mount \033[39;49;00m' $ systemctl enable --now srv-openhab-sys.mount  + systemctl enable --now 'srv-openhab\x2dsys.mount' Created symlink /etc/systemd/system/multi-user.target.wants/srv-openhab\x2dsys.mount → /etc/systemd/system/srv-openhab\x2dsys.mount. + return 0 + echo OK OK + return 0 + cond_redirect create_mount /etc/openhab conf + [[ -n '' ]] + echo -e '\n\033[90;01m$ create_mount /etc/openhab conf \033[39;49;00m' $ create_mount /etc/openhab conf  + create_mount /etc/openhab conf + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + local destination + local mountPoint + local source + destination=conf ++ systemd-escape --path /srv/openhab-conf --suffix mount + mountPoint='srv-openhab\x2dconf.mount' + source=/etc/openhab ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:09_CEST [openHABian] Creating mount /etc/openhab in '\''/srv/openhab-conf'\''... ' 2021-09-26_15:05:09_CEST [openHABian] Creating mount /etc/openhab in '/srv/openhab-conf'... + sed -e 's|%SRC|/etc/openhab|g; s|%DEST|conf|g' /opt/openhabian/includes/srv_mount_template + cond_redirect systemctl -q daemon-reload + cond_redirect systemctl enable --now 'srv-openhab\x2dconf.mount' + [[ -n '' ]] + echo -e '\n\033[90;01m$ systemctl enable --now srv-openhab\x2dconf.mount \033[39;49;00m' $ systemctl enable --now srv-openhab-conf.mount  + systemctl enable --now 'srv-openhab\x2dconf.mount' Created symlink /etc/systemd/system/multi-user.target.wants/srv-openhab\x2dconf.mount → /etc/systemd/system/srv-openhab\x2dconf.mount. + return 0 + echo OK OK + return 0 + cond_redirect create_mount /var/lib/openhab userdata + [[ -n '' ]] + echo -e '\n\033[90;01m$ create_mount /var/lib/openhab userdata \033[39;49;00m' $ create_mount /var/lib/openhab userdata  + create_mount /var/lib/openhab userdata + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + local destination + local mountPoint + local source + destination=userdata ++ systemd-escape --path /srv/openhab-userdata --suffix mount + mountPoint='srv-openhab\x2duserdata.mount' + source=/var/lib/openhab ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:10_CEST [openHABian] Creating mount /var/lib/openhab in '\''/srv/openhab-userdata'\''... ' 2021-09-26_15:05:10_CEST [openHABian] Creating mount /var/lib/openhab in '/srv/openhab-userdata'... + sed -e 's|%SRC|/var/lib/openhab|g; s|%DEST|userdata|g' /opt/openhabian/includes/srv_mount_template + cond_redirect systemctl -q daemon-reload + cond_redirect systemctl enable --now 'srv-openhab\x2duserdata.mount' + [[ -n '' ]] + echo -e '\n\033[90;01m$ systemctl enable --now srv-openhab\x2duserdata.mount \033[39;49;00m' $ systemctl enable --now srv-openhab-userdata.mount  + systemctl enable --now 'srv-openhab\x2duserdata.mount' Created symlink /etc/systemd/system/multi-user.target.wants/srv-openhab\x2duserdata.mount → /etc/systemd/system/srv-openhab\x2duserdata.mount. + return 0 + echo OK OK + return 0 + cond_redirect create_mount /usr/share/openhab/addons addons + [[ -n '' ]] + echo -e '\n\033[90;01m$ create_mount /usr/share/openhab/addons addons \033[39;49;00m' $ create_mount /usr/share/openhab/addons addons  + create_mount /usr/share/openhab/addons addons + running_in_docker + [[ -n '' ]] + grep -qs 'docker\|lxc' /proc/1/cgroup + [[ -f /.dockerenv ]] + return 1 + local destination + local mountPoint + local source + destination=addons ++ systemd-escape --path /srv/openhab-addons --suffix mount + mountPoint='srv-openhab\x2daddons.mount' + source=/usr/share/openhab/addons ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:11_CEST [openHABian] Creating mount /usr/share/openhab/addons in '\''/srv/openhab-addons'\''... ' 2021-09-26_15:05:11_CEST [openHABian] Creating mount /usr/share/openhab/addons in '/srv/openhab-addons'... + sed -e 's|%SRC|/usr/share/openhab/addons|g; s|%DEST|addons|g' /opt/openhabian/includes/srv_mount_template + cond_redirect systemctl -q daemon-reload + cond_redirect systemctl enable --now 'srv-openhab\x2daddons.mount' + [[ -n '' ]] + echo -e '\n\033[90;01m$ systemctl enable --now srv-openhab\x2daddons.mount \033[39;49;00m' $ systemctl enable --now srv-openhab-addons.mount  + systemctl enable --now 'srv-openhab\x2daddons.mount' Created symlink /etc/systemd/system/multi-user.target.wants/srv-openhab\x2daddons.mount → /etc/systemd/system/srv-openhab\x2daddons.mount. + return 0 + echo OK OK + return 0 + echo OK OK + [[ -f /etc/ztab ]] + misc_system_settings ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:11_CEST [openHABian] Applying miscellaneous system settings... ' 2021-09-26_15:05:11_CEST [openHABian] Applying miscellaneous system settings... + cond_echo 'Setting Java and arping file capabilites' + [[ -z '' ]] + echo -e '\033[33;01mSetting Java and arping file capabilites\033[39;49;00m' Setting Java and arping file capabilites +++ command -v java ++ realpath /usr/bin/java + cond_redirect setcap 'cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep' /usr/lib/jvm/zulu-11-amd64/bin/java + [[ -n '' ]] + echo -e '\n\033[90;01m$ setcap cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep /usr/lib/jvm/zulu-11-amd64/bin/java \033[39;49;00m' $ setcap cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep /usr/lib/jvm/zulu-11-amd64/bin/java  + setcap 'cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep' /usr/lib/jvm/zulu-11-amd64/bin/java + return 0 + cond_redirect setcap 'cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep' /usr/sbin/arping + [[ -n '' ]] + echo -e '\n\033[90;01m$ setcap cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep /usr/sbin/arping \033[39;49;00m' $ setcap cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep /usr/sbin/arping  + setcap 'cap_net_raw,cap_net_admin=+eip cap_net_bind_service=+ep' /usr/sbin/arping + return 0 + cond_echo 'Creating a README note for end user'\''s home folder' + [[ -z '' ]] + echo -e '\033[33;01mCreating a README note for end user'\''s home folder\033[39;49;00m' Creating a README note for end user's home folder + echo -e 'This is your linux user'\''s "home" folder.\nPlace personal files, programs or scripts here.' + cond_echo 'Creating SSH key files' + [[ -z '' ]] + echo -e '\033[33;01mCreating SSH key files\033[39;49;00m' Creating SSH key files + cond_redirect mkdir -p /home/openhabian/.ssh + [[ -n '' ]] + echo -e '\n\033[90;01m$ mkdir -p /home/openhabian/.ssh \033[39;49;00m' $ mkdir -p /home/openhabian/.ssh  + mkdir -p /home/openhabian/.ssh + return 0 + cond_redirect chmod 700 /home/openhabian/.ssh + [[ -n '' ]] + echo -e '\n\033[90;01m$ chmod 700 /home/openhabian/.ssh \033[39;49;00m' $ chmod 700 /home/openhabian/.ssh  + chmod 700 /home/openhabian/.ssh + return 0 + cond_redirect touch /home/openhabian/.ssh/authorized_keys + [[ -n '' ]] + echo -e '\n\033[90;01m$ touch /home/openhabian/.ssh/authorized_keys \033[39;49;00m' $ touch /home/openhabian/.ssh/authorized_keys  + touch /home/openhabian/.ssh/authorized_keys + return 0 + cond_redirect chmod 600 /home/openhabian/.ssh/authorized_keys + [[ -n '' ]] + echo -e '\n\033[90;01m$ chmod 600 /home/openhabian/.ssh/authorized_keys \033[39;49;00m' $ chmod 600 /home/openhabian/.ssh/authorized_keys  + chmod 600 /home/openhabian/.ssh/authorized_keys + return 0 + cond_redirect chown -R openhabian:openhabian /home/openhabian/.ssh + [[ -n '' ]] + echo -e '\n\033[90;01m$ chown -R openhabian:openhabian /home/openhabian/.ssh \033[39;49;00m' $ chown -R openhabian:openhabian /home/openhabian/.ssh  + chown -R openhabian:openhabian /home/openhabian/.ssh + return 0 + is_raspbian + [[ debian == \r\a\s\p\b\i\a\n ]] ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspbian ]] + return 1 + is_raspios + [[ debian == \r\a\s\p\i\o\s ]] + is_raspbian + [[ debian == \r\a\s\p\b\i\a\n ]] ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspbian ]] + return 1 ++ cat /etc/os-release + [[ PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" =~ Raspberry Pi OS ]] + [[ -f /boot/issue.txt ]] + return 1 + cond_echo 'Setting a distinguishable apt User-Agent' + [[ -z '' ]] + echo -e '\033[33;01mSetting a distinguishable apt User-Agent\033[39;49;00m' Setting a distinguishable apt User-Agent + echo 'Acquire { http::User-Agent "Debian APT-HTTP/1.3 openHABian"; };' + echo OK OK + samba_setup + local serviceFile=/lib/systemd/system/smbd.service ++ command -v samba + [[ -x '' ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:11_CEST [openHABian] Installing Samba... ' 2021-09-26_15:05:11_CEST [openHABian] Installing Samba... + cond_redirect apt-get install --yes samba + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes samba \033[39;49;00m' $ apt-get install --yes samba  + apt-get install --yes samba Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig Die folgenden zusätzlichen Pakete werden installiert: attr ibverbs-providers libavahi-client3 libboost-iostreams1.74.0 libboost-thread1.74.0 libcephfs2 libcups2 libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 libgpgme11 libibverbs1 libldb2 libnl-route-3-200 libnspr4 libnss3 librados2 librdmacm1 libtalloc2 libtdb1 libtevent0 liburing1 libwbclient0 python3-cffi-backend python3-cryptography python3-dnspython python3-gpg python3-ldb python3-markdown python3-pygments python3-requests-toolbelt python3-samba python3-talloc python3-tdb python3-yaml samba-common samba-common-bin samba-dsdb-modules samba-libs samba-vfs-modules tdb-tools Vorgeschlagene Pakete: cups-common python-cryptography-doc python3-cryptography-vectors python3-sniffio python3-trio python-markdown-doc python-pygments-doc ttf-bitstream-vera bind9 bind9utils ctdb ldb-tools ntp | chrony smbldap-tools ufw winbind heimdal-clients Die folgenden NEUEN Pakete werden installiert: attr ibverbs-providers libavahi-client3 libboost-iostreams1.74.0 libboost-thread1.74.0 libcephfs2 libcups2 libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 libgpgme11 libibverbs1 libldb2 libnl-route-3-200 libnspr4 libnss3 librados2 librdmacm1 libtalloc2 libtdb1 libtevent0 liburing1 libwbclient0 python3-cffi-backend python3-cryptography python3-dnspython python3-gpg python3-ldb python3-markdown python3-pygments python3-requests-toolbelt python3-samba python3-talloc python3-tdb python3-yaml samba samba-common samba-common-bin samba-dsdb-modules samba-libs samba-vfs-modules tdb-tools 0 aktualisiert, 43 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 32,9 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 120 MB Plattenplatz zusätzlich benutzt. 0% [Wird verarbeitet] Holen:1 http://ftp.debian.org/debian bullseye/main amd64 libtalloc2 amd64 2.3.1-2+b1 [29,3 kB] 0% [1 libtalloc2 5.664 B/29,3 kB 19%] 1% [Wird verarbeitet] Holen:2 http://ftp.debian.org/debian bullseye/main amd64 libtevent0 amd64 0.10.2-1 [37,1 kB] 1% [2 libtevent0 5.664 B/37,1 kB 15%] 1% [Warten auf Kopfzeilen] Holen:3 http://ftp.debian.org/debian bullseye/main amd64 libwbclient0 amd64 2:4.13.5+dfsg-2 [311 kB] 1% [3 libwbclient0 9.416 B/311 kB 3%] 2% [Wird verarbeitet] Holen:4 http://ftp.debian.org/debian bullseye/main amd64 python3-dnspython all 2.0.0-1 [103 kB] 2% [4 python3-dnspython 0 B/103 kB 0%] 3% [Wird verarbeitet] Holen:5 http://ftp.debian.org/debian bullseye/main amd64 libtdb1 amd64 1.4.3-1+b1 [49,9 kB] 3% [5 libtdb1 0 B/49,9 kB 0%] 4% [Wird verarbeitet] Holen:6 http://ftp.debian.org/debian bullseye/main amd64 libldb2 amd64 2:2.2.0-3.1 [147 kB] 4% [6 libldb2 0 B/147 kB 0%] Holen:7 http://ftp.debian.org/debian bullseye/main amd64 python3-ldb amd64 2:2.2.0-3.1 [45,6 kB] 4% [7 python3-ldb 508 B/45,6 kB 1%] 5% [Wird verarbeitet] Holen:8 http://ftp.debian.org/debian bullseye/main amd64 python3-tdb amd64 1.4.3-1+b1 [20,6 kB] 5% [8 python3-tdb 3.294 B/20,6 kB 16%] 6% [Wird verarbeitet] Holen:9 http://ftp.debian.org/debian bullseye/main amd64 libavahi-client3 amd64 0.8-5 [62,1 kB] 6% [9 libavahi-client3 0 B/62,1 kB 0%] 6% [Wird verarbeitet] Holen:10 http://ftp.debian.org/debian bullseye/main amd64 libcups2 amd64 2.3.3op2-3+deb11u1 [350 kB] 6% [10 libcups2 0 B/350 kB 0%] 7% [Wird verarbeitet] Holen:11 http://ftp.debian.org/debian bullseye/main amd64 python3-talloc amd64 2.3.1-2+b1 [17,4 kB] 7% [11 python3-talloc 0 B/17,4 kB 0%] 8% [Wird verarbeitet] Holen:12 http://ftp.debian.org/debian bullseye/main amd64 samba-libs amd64 2:4.13.5+dfsg-2 [5.754 kB] 8% [12 samba-libs 0 B/5.754 kB 0%] 15% [12 samba-libs 3.092 kB/5.754 kB 54%] 22% [Wird verarbeitet] Holen:13 http://ftp.debian.org/debian bullseye/main amd64 python3-samba amd64 2:4.13.5+dfsg-2 [2.603 kB] 22% [13 python3-samba 0 B/2.603 kB 0%] 29% [Wird verarbeitet] Holen:14 http://ftp.debian.org/debian bullseye/main amd64 samba-common all 2:4.13.5+dfsg-2 [166 kB] 29% [14 samba-common 0 B/166 kB 0%] 30% [Wird verarbeitet] Holen:15 http://ftp.debian.org/debian bullseye/main amd64 samba-common-bin amd64 2:4.13.5+dfsg-2 [663 kB] 30% [15 samba-common-bin 0 B/663 kB 0%] 32% [Wird verarbeitet] Holen:16 http://ftp.debian.org/debian bullseye/main amd64 tdb-tools amd64 1.4.3-1+b1 [31,7 kB] 32% [16 tdb-tools 0 B/31,7 kB 0%] 33% [Wird verarbeitet] Holen:17 http://ftp.debian.org/debian bullseye/main amd64 samba amd64 2:4.13.5+dfsg-2 [1.178 kB] 33% [17 samba 0 B/1.178 kB 0%] 36% [Wird verarbeitet] Holen:18 http://ftp.debian.org/debian bullseye/main amd64 attr amd64 1:2.4.48-6 [41,9 kB] 36% [18 attr 0 B/41,9 kB 0%] 37% [Wird verarbeitet] Holen:19 http://ftp.debian.org/debian bullseye/main amd64 libnl-route-3-200 amd64 3.4.0-1+b1 [161 kB] 37% [19 libnl-route-3-200 0 B/161 kB 0%] 37% [Wird verarbeitet] Holen:20 http://ftp.debian.org/debian bullseye/main amd64 libibverbs1 amd64 33.2-1 [59,4 kB] 37% [20 libibverbs1 0 B/59,4 kB 0%] 38% [Wird verarbeitet] Holen:21 http://ftp.debian.org/debian bullseye/main amd64 ibverbs-providers amd64 33.2-1 [253 kB] 38% [21 ibverbs-providers 0 B/253 kB 0%] 39% [Wird verarbeitet] Holen:22 http://ftp.debian.org/debian bullseye/main amd64 libboost-iostreams1.74.0 amd64 1.74.0-9 [264 kB] 39% [22 libboost-iostreams1.74.0 0 B/264 kB 0%] 40% [Wird verarbeitet] Holen:23 http://ftp.debian.org/debian bullseye/main amd64 libboost-thread1.74.0 amd64 1.74.0-9 [279 kB] 40% [23 libboost-thread1.74.0 0 B/279 kB 0%] Holen:24 http://ftp.debian.org/debian bullseye/main amd64 libnspr4 amd64 2:4.29-1 [112 kB] 41% [24 libnspr4 4.739 B/112 kB 4%] 42% [Wird verarbeitet] Holen:25 http://ftp.debian.org/debian bullseye/main amd64 libnss3 amd64 2:3.61-1 [1.304 kB] 42% [25 libnss3 0 B/1.304 kB 0%] 46% [Wird verarbeitet] Holen:26 http://ftp.debian.org/debian bullseye/main amd64 librdmacm1 amd64 33.2-1 [68,9 kB] 46% [26 librdmacm1 0 B/68,9 kB 0%] 46% [Wird verarbeitet] Holen:27 http://ftp.debian.org/debian bullseye/main amd64 librados2 amd64 14.2.21-1 [3.099 kB] 46% [27 librados2 0 B/3.099 kB 0%] 54% [Wird verarbeitet] Holen:28 http://ftp.debian.org/debian bullseye/main amd64 libcephfs2 amd64 14.2.21-1 [480 kB] 54% [28 libcephfs2 8.510 B/480 kB 2%] 56% [Wird verarbeitet] Holen:29 http://ftp.debian.org/debian bullseye/main amd64 libgfxdr0 amd64 9.2-1 [3.043 kB] 56% [29 libgfxdr0 4.096 B/3.043 kB 0%] 64% [Warten auf Kopfzeilen] Holen:30 http://ftp.debian.org/debian bullseye/main amd64 libglusterfs0 amd64 9.2-1 [3.288 kB] 64% [30 libglusterfs0 8.394 B/3.288 kB 0%] 71% [30 libglusterfs0 3.002 kB/3.288 kB 91%] 72% [Warten auf Kopfzeilen] Holen:31 http://ftp.debian.org/debian bullseye/main amd64 libgfrpc0 amd64 9.2-1 [3.069 kB] 72% [31 libgfrpc0 24,6 kB/3.069 kB 1%] 80% [Warten auf Kopfzeilen] Holen:32 http://ftp.debian.org/debian bullseye/main amd64 libgfapi0 amd64 9.2-1 [3.097 kB] 80% [32 libgfapi0 8.100 B/3.097 kB 0%] 88% [Warten auf Kopfzeilen] Holen:33 http://ftp.debian.org/debian bullseye/main amd64 libgpgme11 amd64 1.14.0-1+b2 [281 kB] 88% [33 libgpgme11 10,5 kB/281 kB 4%] 89% [Wird verarbeitet] Holen:34 http://ftp.debian.org/debian bullseye/main amd64 liburing1 amd64 0.7-3 [8.572 B] 89% [34 liburing1 7.287 B/8.572 B 85%] 90% [Warten auf Kopfzeilen] Holen:35 http://ftp.debian.org/debian bullseye/main amd64 python3-cffi-backend amd64 1.14.5-1 [85,8 kB] 90% [35 python3-cffi-backend 880 B/85,8 kB 1%] 91% [Wird verarbeitet] Holen:36 http://ftp.debian.org/debian bullseye/main amd64 python3-cryptography amd64 3.3.2-1 [223 kB] 91% [36 python3-cryptography 5.077 B/223 kB 2%] 92% [Wird verarbeitet] Holen:37 http://ftp.debian.org/debian bullseye/main amd64 python3-gpg amd64 1.14.0-1+b2 [334 kB] 92% [37 python3-gpg 0 B/334 kB 0%] 93% [Warten auf Kopfzeilen] Holen:38 http://ftp.debian.org/debian bullseye/main amd64 python3-markdown all 3.3.4-1 [71,4 kB] 93% [38 python3-markdown 4.096 B/71,4 kB 6%] 93% [Warten auf Kopfzeilen] Holen:39 http://ftp.debian.org/debian bullseye/main amd64 python3-pygments all 2.7.1+dfsg-2.1 [657 kB] 93% [39 python3-pygments 4.096 B/657 kB 1%] 96% [Wird verarbeitet] Holen:40 http://ftp.debian.org/debian bullseye/main amd64 python3-requests-toolbelt all 0.9.1-1 [41,7 kB] 96% [40 python3-requests-toolbelt 0 B/41,7 kB 0%] 96% [Wird verarbeitet] Holen:41 http://ftp.debian.org/debian bullseye/main amd64 python3-yaml amd64 5.3.1-5 [138 kB] 96% [41 python3-yaml 0 B/138 kB 0%] 97% [Warten auf Kopfzeilen] Holen:42 http://ftp.debian.org/debian bullseye/main amd64 samba-dsdb-modules amd64 2:4.13.5+dfsg-2 [390 kB] 97% [42 samba-dsdb-modules 1.800 B/390 kB 0%] 98% [Wird verarbeitet] Holen:43 http://ftp.debian.org/debian bullseye/main amd64 samba-vfs-modules amd64 2:4.13.5+dfsg-2 [498 kB] 98% [43 samba-vfs-modules 6.948 B/498 kB 1%] 100% [Wird verarbeitet] Es wurden 32,9 MB in 5 s geholt (6.287 kB/s). Extrahiere Vorlagen aus Paketen: 69% Extrahiere Vorlagen aus Paketen: 100% Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket libtalloc2:amd64 wird gewählt. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 34584 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../00-libtalloc2_2.3.1-2+b1_amd64.deb ... Entpacken von libtalloc2:amd64 (2.3.1-2+b1) ... Vormals nicht ausgewähltes Paket libtevent0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../01-libtevent0_0.10.2-1_amd64.deb ... Entpacken von libtevent0:amd64 (0.10.2-1) ... Vormals nicht ausgewähltes Paket libwbclient0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../02-libwbclient0_2%3a4.13.5+dfsg-2_amd64.deb ... Entpacken von libwbclient0:amd64 (2:4.13.5+dfsg-2) ... Vormals nicht ausgewähltes Paket python3-dnspython wird gewählt. Vorbereitung zum Entpacken von .../03-python3-dnspython_2.0.0-1_all.deb ... Entpacken von python3-dnspython (2.0.0-1) ... Vormals nicht ausgewähltes Paket libtdb1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../04-libtdb1_1.4.3-1+b1_amd64.deb ... Entpacken von libtdb1:amd64 (1.4.3-1+b1) ... Vormals nicht ausgewähltes Paket libldb2:amd64 wird gewählt. Vorbereitung zum Entpacken von .../05-libldb2_2%3a2.2.0-3.1_amd64.deb ... Entpacken von libldb2:amd64 (2:2.2.0-3.1) ... Vormals nicht ausgewähltes Paket python3-ldb wird gewählt. Vorbereitung zum Entpacken von .../06-python3-ldb_2%3a2.2.0-3.1_amd64.deb ... Entpacken von python3-ldb (2:2.2.0-3.1) ... Vormals nicht ausgewähltes Paket python3-tdb wird gewählt. Vorbereitung zum Entpacken von .../07-python3-tdb_1.4.3-1+b1_amd64.deb ... Entpacken von python3-tdb (1.4.3-1+b1) ... Vormals nicht ausgewähltes Paket libavahi-client3:amd64 wird gewählt. Vorbereitung zum Entpacken von .../08-libavahi-client3_0.8-5_amd64.deb ... Entpacken von libavahi-client3:amd64 (0.8-5) ... Vormals nicht ausgewähltes Paket libcups2:amd64 wird gewählt. Vorbereitung zum Entpacken von .../09-libcups2_2.3.3op2-3+deb11u1_amd64.deb ... Entpacken von libcups2:amd64 (2.3.3op2-3+deb11u1) ... Vormals nicht ausgewähltes Paket python3-talloc:amd64 wird gewählt. Vorbereitung zum Entpacken von .../10-python3-talloc_2.3.1-2+b1_amd64.deb ... Entpacken von python3-talloc:amd64 (2.3.1-2+b1) ... Vormals nicht ausgewähltes Paket samba-libs:amd64 wird gewählt. Vorbereitung zum Entpacken von .../11-samba-libs_2%3a4.13.5+dfsg-2_amd64.deb ... Entpacken von samba-libs:amd64 (2:4.13.5+dfsg-2) ... Vormals nicht ausgewähltes Paket python3-samba wird gewählt. Vorbereitung zum Entpacken von .../12-python3-samba_2%3a4.13.5+dfsg-2_amd64.deb ... Entpacken von python3-samba (2:4.13.5+dfsg-2) ... Vormals nicht ausgewähltes Paket samba-common wird gewählt. Vorbereitung zum Entpacken von .../13-samba-common_2%3a4.13.5+dfsg-2_all.deb ... Entpacken von samba-common (2:4.13.5+dfsg-2) ... Vormals nicht ausgewähltes Paket samba-common-bin wird gewählt. Vorbereitung zum Entpacken von .../14-samba-common-bin_2%3a4.13.5+dfsg-2_amd64.deb ... Entpacken von samba-common-bin (2:4.13.5+dfsg-2) ... Vormals nicht ausgewähltes Paket tdb-tools wird gewählt. Vorbereitung zum Entpacken von .../15-tdb-tools_1.4.3-1+b1_amd64.deb ... Entpacken von tdb-tools (1.4.3-1+b1) ... Vormals nicht ausgewähltes Paket samba wird gewählt. Vorbereitung zum Entpacken von .../16-samba_2%3a4.13.5+dfsg-2_amd64.deb ... Entpacken von samba (2:4.13.5+dfsg-2) ... Vormals nicht ausgewähltes Paket attr wird gewählt. Vorbereitung zum Entpacken von .../17-attr_1%3a2.4.48-6_amd64.deb ... Entpacken von attr (1:2.4.48-6) ... Vormals nicht ausgewähltes Paket libnl-route-3-200:amd64 wird gewählt. Vorbereitung zum Entpacken von .../18-libnl-route-3-200_3.4.0-1+b1_amd64.deb ... Entpacken von libnl-route-3-200:amd64 (3.4.0-1+b1) ... Vormals nicht ausgewähltes Paket libibverbs1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../19-libibverbs1_33.2-1_amd64.deb ... Entpacken von libibverbs1:amd64 (33.2-1) ... Vormals nicht ausgewähltes Paket ibverbs-providers:amd64 wird gewählt. Vorbereitung zum Entpacken von .../20-ibverbs-providers_33.2-1_amd64.deb ... Entpacken von ibverbs-providers:amd64 (33.2-1) ... Vormals nicht ausgewähltes Paket libboost-iostreams1.74.0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../21-libboost-iostreams1.74.0_1.74.0-9_amd64.deb ... Entpacken von libboost-iostreams1.74.0:amd64 (1.74.0-9) ... Vormals nicht ausgewähltes Paket libboost-thread1.74.0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../22-libboost-thread1.74.0_1.74.0-9_amd64.deb ... Entpacken von libboost-thread1.74.0:amd64 (1.74.0-9) ... Vormals nicht ausgewähltes Paket libnspr4:amd64 wird gewählt. Vorbereitung zum Entpacken von .../23-libnspr4_2%3a4.29-1_amd64.deb ... Entpacken von libnspr4:amd64 (2:4.29-1) ... Vormals nicht ausgewähltes Paket libnss3:amd64 wird gewählt. Vorbereitung zum Entpacken von .../24-libnss3_2%3a3.61-1_amd64.deb ... Entpacken von libnss3:amd64 (2:3.61-1) ... Vormals nicht ausgewähltes Paket librdmacm1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../25-librdmacm1_33.2-1_amd64.deb ... Entpacken von librdmacm1:amd64 (33.2-1) ... Vormals nicht ausgewähltes Paket librados2 wird gewählt. Vorbereitung zum Entpacken von .../26-librados2_14.2.21-1_amd64.deb ... Entpacken von librados2 (14.2.21-1) ... Vormals nicht ausgewähltes Paket libcephfs2 wird gewählt. Vorbereitung zum Entpacken von .../27-libcephfs2_14.2.21-1_amd64.deb ... Entpacken von libcephfs2 (14.2.21-1) ... Vormals nicht ausgewähltes Paket libgfxdr0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../28-libgfxdr0_9.2-1_amd64.deb ... Entpacken von libgfxdr0:amd64 (9.2-1) ... Vormals nicht ausgewähltes Paket libglusterfs0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../29-libglusterfs0_9.2-1_amd64.deb ... Entpacken von libglusterfs0:amd64 (9.2-1) ... Vormals nicht ausgewähltes Paket libgfrpc0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../30-libgfrpc0_9.2-1_amd64.deb ... Entpacken von libgfrpc0:amd64 (9.2-1) ... Vormals nicht ausgewähltes Paket libgfapi0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../31-libgfapi0_9.2-1_amd64.deb ... Entpacken von libgfapi0:amd64 (9.2-1) ... Vormals nicht ausgewähltes Paket libgpgme11:amd64 wird gewählt. Vorbereitung zum Entpacken von .../32-libgpgme11_1.14.0-1+b2_amd64.deb ... Entpacken von libgpgme11:amd64 (1.14.0-1+b2) ... Vormals nicht ausgewähltes Paket liburing1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../33-liburing1_0.7-3_amd64.deb ... Entpacken von liburing1:amd64 (0.7-3) ... Vormals nicht ausgewähltes Paket python3-cffi-backend:amd64 wird gewählt. Vorbereitung zum Entpacken von .../34-python3-cffi-backend_1.14.5-1_amd64.deb ... Entpacken von python3-cffi-backend:amd64 (1.14.5-1) ... Vormals nicht ausgewähltes Paket python3-cryptography wird gewählt. Vorbereitung zum Entpacken von .../35-python3-cryptography_3.3.2-1_amd64.deb ... Entpacken von python3-cryptography (3.3.2-1) ... Vormals nicht ausgewähltes Paket python3-gpg wird gewählt. Vorbereitung zum Entpacken von .../36-python3-gpg_1.14.0-1+b2_amd64.deb ... Entpacken von python3-gpg (1.14.0-1+b2) ... Vormals nicht ausgewähltes Paket python3-markdown wird gewählt. Vorbereitung zum Entpacken von .../37-python3-markdown_3.3.4-1_all.deb ... Entpacken von python3-markdown (3.3.4-1) ... Vormals nicht ausgewähltes Paket python3-pygments wird gewählt. Vorbereitung zum Entpacken von .../38-python3-pygments_2.7.1+dfsg-2.1_all.deb ... Entpacken von python3-pygments (2.7.1+dfsg-2.1) ... Vormals nicht ausgewähltes Paket python3-requests-toolbelt wird gewählt. Vorbereitung zum Entpacken von .../39-python3-requests-toolbelt_0.9.1-1_all.deb ... Entpacken von python3-requests-toolbelt (0.9.1-1) ... Vormals nicht ausgewähltes Paket python3-yaml wird gewählt. Vorbereitung zum Entpacken von .../40-python3-yaml_5.3.1-5_amd64.deb ... Entpacken von python3-yaml (5.3.1-5) ... Vormals nicht ausgewähltes Paket samba-dsdb-modules:amd64 wird gewählt. Vorbereitung zum Entpacken von .../41-samba-dsdb-modules_2%3a4.13.5+dfsg-2_amd64.deb ... Entpacken von samba-dsdb-modules:amd64 (2:4.13.5+dfsg-2) ... Vormals nicht ausgewähltes Paket samba-vfs-modules:amd64 wird gewählt. Vorbereitung zum Entpacken von .../42-samba-vfs-modules_2%3a4.13.5+dfsg-2_amd64.deb ... Entpacken von samba-vfs-modules:amd64 (2:4.13.5+dfsg-2) ... python3-requests-toolbelt (0.9.1-1) wird eingerichtet ... attr (1:2.4.48-6) wird eingerichtet ... libboost-iostreams1.74.0:amd64 (1.74.0-9) wird eingerichtet ... libtdb1:amd64 (1.4.3-1+b1) wird eingerichtet ... python3-yaml (5.3.1-5) wird eingerichtet ... samba-common (2:4.13.5+dfsg-2) wird eingerichtet ... Creating config file /etc/samba/smb.conf with new version libgpgme11:amd64 (1.14.0-1+b2) wird eingerichtet ... libnl-route-3-200:amd64 (3.4.0-1+b1) wird eingerichtet ... libtalloc2:amd64 (2.3.1-2+b1) wird eingerichtet ... libglusterfs0:amd64 (9.2-1) wird eingerichtet ... python3-tdb (1.4.3-1+b1) wird eingerichtet ... python3-pygments (2.7.1+dfsg-2.1) wird eingerichtet ... libtevent0:amd64 (0.10.2-1) wird eingerichtet ... python3-gpg (1.14.0-1+b2) wird eingerichtet ... libnspr4:amd64 (2:4.29-1) wird eingerichtet ... tdb-tools (1.4.3-1+b1) wird eingerichtet ... update-alternatives: /usr/bin/tdbbackup.tdbtools wird verwendet, um /usr/bin/tdbbackup (tdbbackup) im automatischen Modus bereitzustellen python3-markdown (3.3.4-1) wird eingerichtet ... liburing1:amd64 (0.7-3) wird eingerichtet ... python3-dnspython (2.0.0-1) wird eingerichtet ... libldb2:amd64 (2:2.2.0-3.1) wird eingerichtet ... libavahi-client3:amd64 (0.8-5) wird eingerichtet ... python3-cffi-backend:amd64 (1.14.5-1) wird eingerichtet ... libgfxdr0:amd64 (9.2-1) wird eingerichtet ... libboost-thread1.74.0:amd64 (1.74.0-9) wird eingerichtet ... libibverbs1:amd64 (33.2-1) wird eingerichtet ... ibverbs-providers:amd64 (33.2-1) wird eingerichtet ... python3-talloc:amd64 (2.3.1-2+b1) wird eingerichtet ... libnss3:amd64 (2:3.61-1) wird eingerichtet ... libwbclient0:amd64 (2:4.13.5+dfsg-2) wird eingerichtet ... python3-cryptography (3.3.2-1) wird eingerichtet ... python3-ldb (2:2.2.0-3.1) wird eingerichtet ... libcups2:amd64 (2.3.3op2-3+deb11u1) wird eingerichtet ... libgfrpc0:amd64 (9.2-1) wird eingerichtet ... librdmacm1:amd64 (33.2-1) wird eingerichtet ... librados2 (14.2.21-1) wird eingerichtet ... samba-libs:amd64 (2:4.13.5+dfsg-2) wird eingerichtet ... libcephfs2 (14.2.21-1) wird eingerichtet ... libgfapi0:amd64 (9.2-1) wird eingerichtet ... samba-dsdb-modules:amd64 (2:4.13.5+dfsg-2) wird eingerichtet ... python3-samba (2:4.13.5+dfsg-2) wird eingerichtet ... samba-vfs-modules:amd64 (2:4.13.5+dfsg-2) wird eingerichtet ... samba-common-bin (2:4.13.5+dfsg-2) wird eingerichtet ... Checking smb.conf with testparm Load smb config files from /etc/samba/smb.conf Loaded services file OK. Weak crypto is allowed Server role: ROLE_STANDALONE Done samba (2:4.13.5+dfsg-2) wird eingerichtet ... Lege Gruppe »sambashare« (GID 118) an ... Fertig. Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service Please ignore the following error about deb-systemd-helper not finding those services. (samba-ad-dc.service masked) Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service. Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked. /usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service. samba-ad-dc.service is a disabled or a static unit, not starting it. Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für libc-bin (2.31-13) werden verarbeitet ... + return 0 + echo OK OK ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:37_CEST [openHABian] Setting up Samba network shares... ' 2021-09-26_15:05:37_CEST [openHABian] Setting up Samba network shares... + cond_echo '\nCopying over custom '\''smb.conf'\''... ' + [[ -z '' ]] + echo -e '\033[33;01m\nCopying over custom '\''smb.conf'\''... \033[39;49;00m'  Copying over custom 'smb.conf'...  + cond_redirect cp /opt/openhabian/includes/smb.conf /etc/samba/smb.conf + [[ -n '' ]] + echo -e '\n\033[90;01m$ cp /opt/openhabian/includes/smb.conf /etc/samba/smb.conf \033[39;49;00m' $ cp /opt/openhabian/includes/smb.conf /etc/samba/smb.conf  + cp /opt/openhabian/includes/smb.conf /etc/samba/smb.conf + return 0 + cond_echo '\nWriting authentication data to openHABian default... ' + [[ -z '' ]] + echo -e '\033[33;01m\nWriting authentication data to openHABian default... \033[39;49;00m'  Writing authentication data to openHABian default...  + smbpasswd -e openhabian + echo openhabian + echo openhabian + smbpasswd -s -a openhabian + echo OK OK ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:37_CEST [openHABian] Setting up Samba service... ' 2021-09-26_15:05:37_CEST [openHABian] Setting up Samba service... + cond_redirect mkdir -p /var/log/samba /var/run/samba + [[ -n '' ]] + echo -e '\n\033[90;01m$ mkdir -p /var/log/samba /var/run/samba \033[39;49;00m' $ mkdir -p /var/log/samba /var/run/samba  + mkdir -p /var/log/samba /var/run/samba + return 0 + cond_redirect sed -i -E -e '/PIDFile/d; /NotifyAccess/ a PIDFile=smbd.pid\nRuntimeDirectory=samba' /lib/systemd/system/smbd.service + [[ -n '' ]] + echo -e '\n\033[90;01m$ sed -i -E -e /PIDFile/d; /NotifyAccess/ a PIDFile=smbd.pid\nRuntimeDirectory=samba /lib/systemd/system/smbd.service \033[39;49;00m' $ sed -i -E -e /PIDFile/d; /NotifyAccess/ a PIDFile=smbd.pid RuntimeDirectory=samba /lib/systemd/system/smbd.service  + sed -i -E -e '/PIDFile/d; /NotifyAccess/ a PIDFile=smbd.pid\nRuntimeDirectory=samba' /lib/systemd/system/smbd.service + return 0 + zram_dependency install nmbd smbd + local zramServiceConfig=/etc/systemd/system/zram-config.service + local install=yes + [[ -f /etc/ztab ]] + return 0 + cond_redirect systemctl enable --now smbd.service + echo OK OK + permissions_corrections + local gpioDir=/sys/devices/platform/soc + groups=('audio' 'bluetooth' 'dialout' 'gpio' 'tty') + local groups + openhabFolders=('/etc/openhab' '/var/lib/openhab' '/var/log/openhab' '/usr/share/openhab') + local openhabFolders + local openhabHome=/var/lib/openhab + local retval=0 ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:38_CEST [openHABian] Applying file permissions recommendations... ' 2021-09-26_15:05:38_CEST [openHABian] Applying file permissions recommendations... + openhab_is_installed + openhab2_is_installed ++ dpkg -s openhab2 ++ grep Status ++ cut '-d ' -f2 + [[ '' == \i\n\s\t\a\l\l ]] + return 1 + openhab3_is_installed ++ dpkg -s openhab ++ grep Status ++ cut '-d ' -f2 + [[ '' == \i\n\s\t\a\l\l ]] + return 1 + return 1 + echo 'FAILED (please execute after openHAB is installed)' FAILED (please execute after openHAB is installed) + return 1 + add_admin_ssh_key + [[ -z '' ]] + return 0 + clean_config_userpw + cond_redirect sed -i -e 's|^userpw=.*$|\#userpw=xxxxxx|g' /etc/openhabian.conf + [[ -n '' ]] + echo -e '\n\033[90;01m$ sed -i -e s|^userpw=.*$|\#userpw=xxxxxx|g /etc/openhabian.conf \033[39;49;00m' $ sed -i -e s|^userpw=.*$|\#userpw=xxxxxx|g /etc/openhabian.conf  + sed -i -e 's|^userpw=.*$|\#userpw=xxxxxx|g' /etc/openhabian.conf + return 0 + frontail_setup light + local frontailBase + local frontailUser=frontail + local frontailTheme + [[ light == \l\i\g\h\t ]] + frontailTheme=openhab ++ command -v npm + [[ -x '' ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:38_CEST [openHABian] Installing Frontail prerequsites (NodeJS)... ' 2021-09-26_15:05:38_CEST [openHABian] Installing Frontail prerequsites (NodeJS)... + cond_redirect nodejs_setup + [[ -n '' ]] + echo -e '\n\033[90;01m$ nodejs_setup \033[39;49;00m' $ nodejs_setup  + nodejs_setup ++ command -v npm + [[ -x '' ]] + local link=https://unofficial-builds.nodejs.org/download/release/v14.15.4/node-v14.15.4-linux-armv6l.tar.xz + local myDistro + local temp ++ command -v lsb_release + [[ -x /usr/bin/lsb_release ]] ++ lsb_release -sc + myDistro=bullseye ++ mktemp /tmp/openhabian.XXXXX + temp=/tmp/openhabian.7sKnJ + [[ -z '' ]] + is_armv6l + [[ amd64 == \a\r\m\v\6\l ]] + case "$(uname -m)" in ++ uname -m + return 1 + [[ -z '' ]] + add_keys https://deb.nodesource.com/gpgkey/nodesource.gpg.key + local repoKey ++ mktemp /tmp/openhabian.XXXXX + repoKey=/tmp/openhabian.gQFfF ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:38_CEST [openHABian] Adding required keys to apt... ' 2021-09-26_15:05:38_CEST [openHABian] Adding required keys to apt... + cond_redirect wget -qO /tmp/openhabian.gQFfF https://deb.nodesource.com/gpgkey/nodesource.gpg.key + [[ -n '' ]] + echo -e '\n\033[90;01m$ wget -qO /tmp/openhabian.gQFfF https://deb.nodesource.com/gpgkey/nodesource.gpg.key \033[39;49;00m' $ wget -qO /tmp/openhabian.gQFfF https://deb.nodesource.com/gpgkey/nodesource.gpg.key  + wget -qO /tmp/openhabian.gQFfF https://deb.nodesource.com/gpgkey/nodesource.gpg.key + return 0 + cond_redirect apt-key add /tmp/openhabian.gQFfF + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-key add /tmp/openhabian.gQFfF \033[39;49;00m' $ apt-key add /tmp/openhabian.gQFfF  + apt-key add /tmp/openhabian.gQFfF Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + return 0 + echo OK OK + rm -f /tmp/openhabian.gQFfF ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:39_CEST [openHABian] Adding NodeSource repository to apt... ' 2021-09-26_15:05:39_CEST [openHABian] Adding NodeSource repository to apt... + echo 'deb https://deb.nodesource.com/node_14.x bullseye main' + echo 'deb-src https://deb.nodesource.com/node_14.x bullseye main' + [[ -n '' ]] + cond_redirect apt-get update + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get update \033[39;49;00m' $ apt-get update  + apt-get update 0% [Wird verarbeitet] OK:1 http://security.debian.org bullseye-security InRelease 0% [Warten auf Kopfzeilen] [Verbunden mit deb.nodesource.com (2.22.242.104)] [Warten auf Kopfzeilen] [Verbunden mit repos.azul.com (143.204.98.60) OK:2 http://ftp.debian.org/debian bullseye InRelease 0% [Warten auf Kopfzeilen] [Verbunden mit deb.nodesource.com (2.22.242.104)] [Warten auf Kopfzeilen] [Verbunden mit repos.azul.com (143.204.98.60) OK:3 http://ftp.debian.org/debian bullseye-updates InRelease 0% [Verbunden mit deb.nodesource.com (2.22.242.104)] [Warten auf Kopfzeilen] [Verbunden mit repos.azul.com (143.204.98.60)] Ign:4 http://repos.azulsystems.com/debian stable InRelease 0% [Verbunden mit deb.nodesource.com (2.22.242.104)] [Warten auf Kopfzeilen] OK:5 http://repos.azulsystems.com/debian stable Release 0% [Warten auf Kopfzeilen] [Warten auf Kopfzeilen] Holen:6 https://deb.nodesource.com/node_14.x bullseye InRelease [4.586 B] 0% [Warten auf Kopfzeilen] 0% [Warten auf Kopfzeilen] OK:7 https://repos.azul.com/zulu/deb stable InRelease 0% [Wird verarbeitet] 0% [Wird verarbeitet] 0% [Wird verarbeitet] 0% [Wird verarbeitet] 0% [Wird verarbeitet] 88% [Warten auf Kopfzeilen] Holen:9 https://deb.nodesource.com/node_14.x bullseye/main amd64 Packages [768 B] 100% [9 Packages 768 B/768 B 100%] 100% [Wird verarbeitet] 100% [9 Packages store 0 B] 100% [Wird verarbeitet] Es wurden 5.354 B in 1 s geholt (4.176 B/s). Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 45% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 62% Paketlisten werden gelesen… 62% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… Fertig + return 0 + echo OK OK ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:41_CEST [openHABian] Installing NodeJS... ' 2021-09-26_15:05:41_CEST [openHABian] Installing NodeJS... + [[ -n '' ]] + cond_redirect apt-get install --yes nodejs + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes nodejs \033[39;49;00m' $ apt-get install --yes nodejs  + apt-get install --yes nodejs Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig Die folgenden NEUEN Pakete werden installiert: nodejs 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 1 nicht aktualisiert. Es müssen 24,9 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 121 MB Plattenplatz zusätzlich benutzt. 0% [Wird verarbeitet] Holen:1 https://deb.nodesource.com/node_14.x bullseye/main amd64 nodejs amd64 14.17.6-deb-1nodesource1 [24,9 MB] 0% [1 nodejs 16,2 kB/24,9 MB 0%] 8% [1 nodejs 2.507 kB/24,9 MB 10%] 18% [1 nodejs 5.493 kB/24,9 MB 22%] 28% [1 nodejs 8.836 kB/24,9 MB 35%] 39% [1 nodejs 12,2 MB/24,9 MB 49%] 50% [1 nodejs 15,5 MB/24,9 MB 62%] 61% [1 nodejs 18,9 MB/24,9 MB 76%] 71% [1 nodejs 22,2 MB/24,9 MB 89%] 100% [Wird verarbeitet] Es wurden 24,9 MB in 4 s geholt (6.158 kB/s). Vormals nicht ausgewähltes Paket nodejs wird gewählt. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 36497 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../nodejs_14.17.6-deb-1nodesource1_amd64.deb ... Entpacken von nodejs (14.17.6-deb-1nodesource1) ... nodejs (14.17.6-deb-1nodesource1) wird eingerichtet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... + return 0 + echo OK OK + return 0 + echo OK OK ++ npm list -g ++ head -n 1 + frontailBase=/usr/lib/node_modules/frontail + id -u frontail + cond_redirect useradd --groups openhabian,openhab -s /bin/bash -d /var/tmp frontail + [[ -n '' ]] + echo -e '\n\033[90;01m$ useradd --groups openhabian,openhab -s /bin/bash -d /var/tmp frontail \033[39;49;00m' $ useradd --groups openhabian,openhab -s /bin/bash -d /var/tmp frontail  + useradd --groups openhabian,openhab -s /bin/bash -d /var/tmp frontail useradd: Gruppe »openhab« existiert nicht. + return 6 + echo 'FAILED (adduser)' FAILED (adduser) + return 1 + custom_log add /var/log/foo.log /usr/local/bin/openhabian-config: Zeile 116: custom_log: Kommando nicht gefunden. + zram_setup + [[ -n 1 ]] + [[ disable == \d\i\s\a\b\l\e ]] ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:54_CEST [openHABian] Skipping zram install as requested.' 2021-09-26_15:05:54_CEST [openHABian] Skipping zram install as requested.+ return 1 + exim_setup + [[ -n 1 ]] + [[ -z john.doe@foo.bar ]] + local updateEximTemplate=/opt/openhabian/includes/update-exim4.conf.conf-template + local eximConfig=/etc/exim4/update-exim4.conf.conf + local eximPasswd=/etc/exim4/passwd.client + local interfaces + local relaynets + local addresses=/etc/email-addresses + local temp + local logrotateFile=/etc/logrotate.d/exim4 + local introText + dpkg -s mailutils exim4 ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:05:54_CEST [openHABian] Installing MTA required packages (mailutils, exim4, dnsutils)... ' 2021-09-26_15:05:54_CEST [openHABian] Installing MTA required packages (mailutils, exim4, dnsutils)... + cond_redirect apt-get install --yes exim4 mailutils + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes exim4 mailutils \033[39;49;00m' $ apt-get install --yes exim4 mailutils  + apt-get install --yes exim4 mailutils Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig Die folgenden zusätzlichen Pakete werden installiert: exim4-base exim4-config exim4-daemon-light gsasl-common guile-2.2-libs libevent-2.1-7 libfribidi0 libgc1 libgnutls-dane0 libgsasl7 libidn11 libltdl7 libmailutils7 libmariadb3 libntlm0 libunbound8 mailutils-common mariadb-common mysql-common psmisc Vorgeschlagene Pakete: exim4-doc-html | exim4-doc-info eximon4 spf-tools-perl swaks dns-root-data mailutils-mh mailutils-doc Die folgenden Pakete werden ENTFERNT: postfix Die folgenden NEUEN Pakete werden installiert: exim4 exim4-base exim4-config exim4-daemon-light gsasl-common guile-2.2-libs libevent-2.1-7 libfribidi0 libgc1 libgnutls-dane0 libgsasl7 libidn11 libltdl7 libmailutils7 libmariadb3 libntlm0 libunbound8 mailutils mailutils-common mariadb-common mysql-common psmisc 0 aktualisiert, 22 neu installiert, 1 zu entfernen und 1 nicht aktualisiert. Es müssen 12,1 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 56,7 MB Plattenplatz zusätzlich benutzt. 0% [Wird verarbeitet] Holen:1 http://ftp.debian.org/debian bullseye/main amd64 exim4-config all 4.94.2-7 [335 kB] 0% [1 exim4-config 7.552 B/335 kB 2%] 3% [Wird verarbeitet] Holen:2 http://ftp.debian.org/debian bullseye/main amd64 exim4-base amd64 4.94.2-7 [1.175 kB] 3% [2 exim4-base 0 B/1.175 kB 0%] 12% [Warten auf Kopfzeilen] Holen:3 http://ftp.debian.org/debian bullseye/main amd64 libevent-2.1-7 amd64 2.1.12-stable-1 [188 kB] 12% [3 libevent-2.1-7 4.292 B/188 kB 2%] 14% [Warten auf Kopfzeilen] Holen:4 http://ftp.debian.org/debian bullseye/main amd64 libunbound8 amd64 1.13.1-1 [504 kB] 14% [4 libunbound8 5.136 B/504 kB 1%] 18% [Warten auf Kopfzeilen] Holen:5 http://ftp.debian.org/debian bullseye/main amd64 libgnutls-dane0 amd64 3.7.1-5 [394 kB] 18% [5 libgnutls-dane0 2.492 B/394 kB 1%] 22% [Warten auf Kopfzeilen] Holen:6 http://ftp.debian.org/debian bullseye/main amd64 libidn11 amd64 1.33-3 [116 kB] 22% [6 libidn11 4.832 B/116 kB 4%] 23% [Warten auf Kopfzeilen] Holen:7 http://ftp.debian.org/debian bullseye/main amd64 exim4-daemon-light amd64 4.94.2-7 [658 kB] 23% [7 exim4-daemon-light 2.545 B/658 kB 0%] 29% [Warten auf Kopfzeilen] Holen:8 http://ftp.debian.org/debian bullseye/main amd64 exim4 all 4.94.2-7 [7.184 B] 29% [8 exim4 6.925 B/7.184 B 96%] 30% [Warten auf Kopfzeilen] Holen:9 http://ftp.debian.org/debian bullseye/main amd64 gsasl-common all 1.10.0-4 [175 kB] 30% [9 gsasl-common 1.906 B/175 kB 1%] 32% [Wird verarbeitet] Holen:10 http://ftp.debian.org/debian bullseye/main amd64 libgc1 amd64 1:8.0.4-3 [239 kB] 32% [10 libgc1 5.662 B/239 kB 2%] 34% [Warten auf Kopfzeilen] Holen:11 http://ftp.debian.org/debian bullseye/main amd64 libltdl7 amd64 2.4.6-15 [391 kB] 34% [11 libltdl7 2.234 B/391 kB 1%] 38% [Warten auf Kopfzeilen] Holen:12 http://ftp.debian.org/debian bullseye/main amd64 guile-2.2-libs amd64 2.2.7+1-6 [4.980 kB] 38% [12 guile-2.2-libs 6.401 B/4.980 kB 0%] 59% [12 guile-2.2-libs 3.246 kB/4.980 kB 65%] 71% [Warten auf Kopfzeilen] Holen:13 http://ftp.debian.org/debian bullseye/main amd64 libfribidi0 amd64 1.0.8-2 [64,8 kB] 71% [13 libfribidi0 11,6 kB/64,8 kB 18%] 73% [Warten auf Kopfzeilen] Holen:14 http://ftp.debian.org/debian bullseye/main amd64 libntlm0 amd64 1.6-3 [84,7 kB] 73% [14 libntlm0 2.796 B/84,7 kB 3%] 74% [Warten auf Kopfzeilen] Holen:15 http://ftp.debian.org/debian bullseye/main amd64 libgsasl7 amd64 1.10.0-4 [195 kB] 74% [15 libgsasl7 2.364 B/195 kB 1%] 76% [Warten auf Kopfzeilen] Holen:16 http://ftp.debian.org/debian bullseye/main amd64 mailutils-common all 1:3.10-3 [728 kB] 76% [16 mailutils-common 4.881 B/728 kB 1%] 82% [Warten auf Kopfzeilen] Holen:17 http://ftp.debian.org/debian bullseye/main amd64 mysql-common all 5.8+1.0.7 [7.464 B] 82% [17 mysql-common 3.504 B/7.464 B 47%] 83% [Wird verarbeitet] Holen:18 http://ftp.debian.org/debian bullseye/main amd64 mariadb-common all 1:10.5.11-1 [36,3 kB] 83% [18 mariadb-common 4.814 B/36,3 kB 13%] 84% [Warten auf Kopfzeilen] Holen:19 http://ftp.debian.org/debian bullseye/main amd64 libmariadb3 amd64 1:10.5.11-1 [175 kB] 84% [19 libmariadb3 2.822 B/175 kB 2%] 86% [Warten auf Kopfzeilen] Holen:20 http://ftp.debian.org/debian bullseye/main amd64 libmailutils7 amd64 1:3.10-3+b1 [893 kB] 86% [20 libmailutils7 3.713 B/893 kB 0%] 93% [Warten auf Kopfzeilen] Holen:21 http://ftp.debian.org/debian bullseye/main amd64 mailutils amd64 1:3.10-3+b1 [576 kB] 93% [21 mailutils 4.861 B/576 kB 1%] 98% [Warten auf Kopfzeilen] Holen:22 http://ftp.debian.org/debian bullseye/main amd64 psmisc amd64 23.4-2 [198 kB] 98% [22 psmisc 545 B/198 kB 0%] 100% [Wird verarbeitet] Es wurden 12,1 MB in 2 s geholt (6.111 kB/s). Vorkonfiguration der Pakete ... (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 41427 Dateien und Verzeichnisse sind derzeit installiert.) Entfernen von postfix (3.5.6-1+b1) ... Vormals nicht ausgewähltes Paket exim4-config wird gewählt. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 41255 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../00-exim4-config_4.94.2-7_all.deb ... Entpacken von exim4-config (4.94.2-7) ... Vormals nicht ausgewähltes Paket exim4-base wird gewählt. Vorbereitung zum Entpacken von .../01-exim4-base_4.94.2-7_amd64.deb ... Entpacken von exim4-base (4.94.2-7) ... Vormals nicht ausgewähltes Paket libevent-2.1-7:amd64 wird gewählt. Vorbereitung zum Entpacken von .../02-libevent-2.1-7_2.1.12-stable-1_amd64.deb ... Entpacken von libevent-2.1-7:amd64 (2.1.12-stable-1) ... Vormals nicht ausgewähltes Paket libunbound8:amd64 wird gewählt. Vorbereitung zum Entpacken von .../03-libunbound8_1.13.1-1_amd64.deb ... Entpacken von libunbound8:amd64 (1.13.1-1) ... Vormals nicht ausgewähltes Paket libgnutls-dane0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../04-libgnutls-dane0_3.7.1-5_amd64.deb ... Entpacken von libgnutls-dane0:amd64 (3.7.1-5) ... Vormals nicht ausgewähltes Paket libidn11:amd64 wird gewählt. Vorbereitung zum Entpacken von .../05-libidn11_1.33-3_amd64.deb ... Entpacken von libidn11:amd64 (1.33-3) ... Vormals nicht ausgewähltes Paket exim4-daemon-light wird gewählt. Vorbereitung zum Entpacken von .../06-exim4-daemon-light_4.94.2-7_amd64.deb ... Entpacken von exim4-daemon-light (4.94.2-7) ... Vormals nicht ausgewähltes Paket exim4 wird gewählt. Vorbereitung zum Entpacken von .../07-exim4_4.94.2-7_all.deb ... Entpacken von exim4 (4.94.2-7) ... Vormals nicht ausgewähltes Paket gsasl-common wird gewählt. Vorbereitung zum Entpacken von .../08-gsasl-common_1.10.0-4_all.deb ... Entpacken von gsasl-common (1.10.0-4) ... Vormals nicht ausgewähltes Paket libgc1:amd64 wird gewählt. Vorbereitung zum Entpacken von .../09-libgc1_1%3a8.0.4-3_amd64.deb ... Entpacken von libgc1:amd64 (1:8.0.4-3) ... Vormals nicht ausgewähltes Paket libltdl7:amd64 wird gewählt. Vorbereitung zum Entpacken von .../10-libltdl7_2.4.6-15_amd64.deb ... Entpacken von libltdl7:amd64 (2.4.6-15) ... Vormals nicht ausgewähltes Paket guile-2.2-libs:amd64 wird gewählt. Vorbereitung zum Entpacken von .../11-guile-2.2-libs_2.2.7+1-6_amd64.deb ... Entpacken von guile-2.2-libs:amd64 (2.2.7+1-6) ... Vormals nicht ausgewähltes Paket libfribidi0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../12-libfribidi0_1.0.8-2_amd64.deb ... Entpacken von libfribidi0:amd64 (1.0.8-2) ... Vormals nicht ausgewähltes Paket libntlm0:amd64 wird gewählt. Vorbereitung zum Entpacken von .../13-libntlm0_1.6-3_amd64.deb ... Entpacken von libntlm0:amd64 (1.6-3) ... Vormals nicht ausgewähltes Paket libgsasl7:amd64 wird gewählt. Vorbereitung zum Entpacken von .../14-libgsasl7_1.10.0-4_amd64.deb ... Entpacken von libgsasl7:amd64 (1.10.0-4) ... Vormals nicht ausgewähltes Paket mailutils-common wird gewählt. Vorbereitung zum Entpacken von .../15-mailutils-common_1%3a3.10-3_all.deb ... Entpacken von mailutils-common (1:3.10-3) ... Vormals nicht ausgewähltes Paket mysql-common wird gewählt. Vorbereitung zum Entpacken von .../16-mysql-common_5.8+1.0.7_all.deb ... Entpacken von mysql-common (5.8+1.0.7) ... Vormals nicht ausgewähltes Paket mariadb-common wird gewählt. Vorbereitung zum Entpacken von .../17-mariadb-common_1%3a10.5.11-1_all.deb ... Entpacken von mariadb-common (1:10.5.11-1) ... Vormals nicht ausgewähltes Paket libmariadb3:amd64 wird gewählt. Vorbereitung zum Entpacken von .../18-libmariadb3_1%3a10.5.11-1_amd64.deb ... Entpacken von libmariadb3:amd64 (1:10.5.11-1) ... Vormals nicht ausgewähltes Paket libmailutils7:amd64 wird gewählt. Vorbereitung zum Entpacken von .../19-libmailutils7_1%3a3.10-3+b1_amd64.deb ... Entpacken von libmailutils7:amd64 (1:3.10-3+b1) ... Vormals nicht ausgewähltes Paket mailutils wird gewählt. Vorbereitung zum Entpacken von .../20-mailutils_1%3a3.10-3+b1_amd64.deb ... Entpacken von mailutils (1:3.10-3+b1) ... Vormals nicht ausgewähltes Paket psmisc wird gewählt. Vorbereitung zum Entpacken von .../21-psmisc_23.4-2_amd64.deb ... Entpacken von psmisc (23.4-2) ... mysql-common (5.8+1.0.7) wird eingerichtet ... update-alternatives: /etc/mysql/my.cnf.fallback wird verwendet, um /etc/mysql/my.cnf (my.cnf) im automatischen Modus bereitzustellen psmisc (23.4-2) wird eingerichtet ... mariadb-common (1:10.5.11-1) wird eingerichtet ... update-alternatives: /etc/mysql/mariadb.cnf wird verwendet, um /etc/mysql/my.cnf (my.cnf) im automatischen Modus bereitzustellen libntlm0:amd64 (1.6-3) wird eingerichtet ... libidn11:amd64 (1.33-3) wird eingerichtet ... libfribidi0:amd64 (1.0.8-2) wird eingerichtet ... libevent-2.1-7:amd64 (2.1.12-stable-1) wird eingerichtet ... mailutils-common (1:3.10-3) wird eingerichtet ... libmariadb3:amd64 (1:10.5.11-1) wird eingerichtet ... libgc1:amd64 (1:8.0.4-3) wird eingerichtet ... libltdl7:amd64 (2.4.6-15) wird eingerichtet ... exim4-config (4.94.2-7) wird eingerichtet ... Adding system-user for exim (v4) gsasl-common (1.10.0-4) wird eingerichtet ... guile-2.2-libs:amd64 (2.2.7+1-6) wird eingerichtet ... exim4-base (4.94.2-7) wird eingerichtet ... exim: DB upgrade, deleting hints-db Created symlink /etc/systemd/system/timers.target.wants/exim4-base.timer → /lib/systemd/system/exim4-base.timer. exim4-base.service is a disabled or a static unit, not starting it. libgsasl7:amd64 (1.10.0-4) wird eingerichtet ... libunbound8:amd64 (1.13.1-1) wird eingerichtet ... libgnutls-dane0:amd64 (3.7.1-5) wird eingerichtet ... libmailutils7:amd64 (1:3.10-3+b1) wird eingerichtet ... exim4-daemon-light (4.94.2-7) wird eingerichtet ... mailutils (1:3.10-3+b1) wird eingerichtet ... update-alternatives: /usr/bin/frm.mailutils wird verwendet, um /usr/bin/frm (frm) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/from.mailutils wird verwendet, um /usr/bin/from (from) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/messages.mailutils wird verwendet, um /usr/bin/messages (messages) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/movemail.mailutils wird verwendet, um /usr/bin/movemail (movemail) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/readmsg.mailutils wird verwendet, um /usr/bin/readmsg (readmsg) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/dotlock.mailutils wird verwendet, um /usr/bin/dotlock (dotlock) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/mail.mailutils wird verwendet, um /usr/bin/mailx (mailx) im automatischen Modus bereitzustellen exim4 (4.94.2-7) wird eingerichtet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für libc-bin (2.31-13) werden verarbeitet ... + return 0 + echo OK OK + cond_redirect install_dnsutils + [[ -n '' ]] + echo -e '\n\033[90;01m$ install_dnsutils \033[39;49;00m' $ install_dnsutils  + install_dnsutils + apt-cache show bind9-dnsutils + apt-get install --yes bind9-dnsutils Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig bind9-dnsutils ist schon die neueste Version (1:9.16.15-1). 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 1 nicht aktualisiert. + return 0 + return 0 + echo OK OK ++ dig +short Debian ++ tr '\n' ';' + interfaces='127.0.0.1;::1' ++ dig +short Debian ++ cut -d. -f1-3 + relaynets=.0/24 + introText='We will guide you through the install of exim4 as the mail transfer agent on your system and configure it to relay mails through a public service such as Google gmail.\n\nThe values you need to enter after closing this window are documented here:\n\nhttps://www.openhab.org/docs/installation/openhabian-exim.html\n\nOpen that URL in a browser now. Your interface addresses are 127.0.0.1;::1.\nYou will be able to repeat the whole installation if required by selecting the openHABian menu for MTA again.' ++ mktemp /tmp/openhabian.XXXXX + temp=/tmp/openhabian.jQJ7B ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:06:09_CEST [openHABian] Beginning Mail Transfer Agent setup... ' 2021-09-26_15:06:09_CEST [openHABian] Beginning Mail Transfer Agent setup... + [[ -n '' ]] + sed -e 's|%INTERFACES|127.0.0.1;::1|g' -e 's|%SMARTHOST|smtp.gmail.com|g' -e 's|%SMARTPORT|587|g' -e 's|%RELAYNETS|.0/24|g' /opt/openhabian/includes/update-exim4.conf.conf-template + update-exim4.conf + echo OK OK + zram_dependency install exim4 + local zramServiceConfig=/etc/systemd/system/zram-config.service + local install=yes + [[ -f /etc/ztab ]] + return 0 ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:06:09_CEST [openHABian] Creating MTA config... ' 2021-09-26_15:06:09_CEST [openHABian] Creating MTA config... + cond_redirect mkdir -p /var/log/exim4 + [[ -n '' ]] + echo -e '\n\033[90;01m$ mkdir -p /var/log/exim4 \033[39;49;00m' $ mkdir -p /var/log/exim4  + mkdir -p /var/log/exim4 + return 0 + cond_redirect chmod -R u+rw /var/log/exim4 + [[ -n '' ]] + echo -e '\n\033[90;01m$ chmod -R u+rw /var/log/exim4 \033[39;49;00m' $ chmod -R u+rw /var/log/exim4  + chmod -R u+rw /var/log/exim4 + return 0 + cond_redirect chown -R Debian-exim /var/log/exim4 + [[ -n '' ]] + echo -e '\n\033[90;01m$ chown -R Debian-exim /var/log/exim4 \033[39;49;00m' $ chown -R Debian-exim /var/log/exim4  + chown -R Debian-exim /var/log/exim4 + return 0 + grep '^#' /etc/exim4/passwd.client + echo smtp.gmail.com:john.doe@foo.bar:secret + cond_redirect cp /tmp/openhabian.jQJ7B /etc/exim4/passwd.client + [[ -n '' ]] + echo -e '\n\033[90;01m$ cp /tmp/openhabian.jQJ7B /etc/exim4/passwd.client \033[39;49;00m' $ cp /tmp/openhabian.jQJ7B /etc/exim4/passwd.client  + cp /tmp/openhabian.jQJ7B /etc/exim4/passwd.client + return 0 + cond_redirect rm -f /tmp/openhabian.jQJ7B + [[ -n '' ]] + echo -e '\n\033[90;01m$ rm -f /tmp/openhabian.jQJ7B \033[39;49;00m' $ rm -f /tmp/openhabian.jQJ7B  + rm -f /tmp/openhabian.jQJ7B + return 0 + cond_redirect chmod o-rwx /etc/exim4/passwd.client + [[ -n '' ]] + echo -e '\n\033[90;01m$ chmod o-rwx /etc/exim4/passwd.client \033[39;49;00m' $ chmod o-rwx /etc/exim4/passwd.client  + chmod o-rwx /etc/exim4/passwd.client + return 0 + echo OK OK + for s in base paniclog + [[ -f /etc/logrotate.d/exim4-base ]] + sed -i 's#Create 640 Debian-exim adm#Create 640 Debian-exim adm\n\tsu Debian-exim adm#g' /etc/logrotate.d/exim4-base + for s in base paniclog + [[ -f /etc/logrotate.d/exim4-paniclog ]] + sed -i 's#Create 640 Debian-exim adm#Create 640 Debian-exim adm\n\tsu Debian-exim adm#g' /etc/logrotate.d/exim4-paniclog ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:06:09_CEST [openHABian] Adding to john.doe@foo.bar email to system accounts... ' 2021-09-26_15:06:09_CEST [openHABian] Adding to john.doe@foo.bar email to system accounts... + sed -i '/^[^#]/d' /etc/email-addresses + echo 'openhab: john.doe@foo.bar' + echo 'openhabian: john.doe@foo.bar' + echo 'root: john.doe@foo.bar' + echo 'backup: john.doe@foo.bar' + echo OK OK + install_tailscale install + local 'installText=We will install the tailscale VPN client on your system. Use it to securely interconnect multiple openHAB(ian) instances.\nSee https://tailscale.com/blog/how-tailscale-works/ for a comprehensive explanation how it creates a secure VPN. For personal use, you can get a free solo service from tailscale.com.' + local 'removeText=We will remove the tailscale VPN client from your system.\n\nDouble-check ~/.ssh/authorized_keys and eventually remove the admin key.' + local serviceTargetDir=/lib/systemd/system + [[ -n 1 ]] + [[ ! -v tskey-xxxxxxxxxxxxxxxxx ]] ++ timestamp ++ date +%F_%T_%Z + echo '2021-09-26_15:06:09_CEST [openHABian] tailscale VPN installation... SKIPPED (no preauthkey defined)' 2021-09-26_15:06:09_CEST [openHABian] tailscale VPN installation... SKIPPED (no preauthkey defined) + return 1 + setup_mirror_SD install + [[ -n 1 ]] + [[ -z /dev/sda ]] + local dest + local srcSize + local destSize + local minBackupSize + local serviceTargetDir=/etc/systemd/system + local storageDir=/storage + local 'sizeError=your destination SD card device does not have enough space, it needs to have at least twice as much as the source' + local 'infoText1=DANGEROUS OPERATION, USE WITH PRECAUTION!\n\nThis will *copy* your system root from your SD card to a USB attached card writer device. Are you sure' + local 'infoText2=is an SD card writer device equipped with a dispensible SD card? Are you sure, this will destroy all data on that card and you want to proceed writing to this device?' ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:06:09_CEST [openHABian] Setting up automated SD mirroring and backup... ' 2021-09-26_15:06:09_CEST [openHABian] Setting up automated SD mirroring and backup... + [[ install == \r\e\m\o\v\e ]] + [[ install != \i\n\s\t\a\l\l ]] + is_pi + is_pifour + [[ pi4 == \p\i\4 ]] + return 0 + return 0 + mkdir -p /storage + cond_redirect apt-get install --yes gdisk + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get install --yes gdisk \033[39;49;00m' $ apt-get install --yes gdisk  + apt-get install --yes gdisk Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 100% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig Die folgenden NEUEN Pakete werden installiert: gdisk 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 1 nicht aktualisiert. Es müssen 220 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 897 kB Plattenplatz zusätzlich benutzt. 0% [Wird verarbeitet] Holen:1 http://ftp.debian.org/debian bullseye/main amd64 gdisk amd64 1.0.6-1.1 [220 kB] 1% [1 gdisk 1.888 B/220 kB 1%] 100% [Wird verarbeitet] Es wurden 220 kB in 0 s geholt (2.102 kB/s). Vormals nicht ausgewähltes Paket gdisk wird gewählt. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 42462 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../gdisk_1.0.6-1.1_amd64.deb ... Entpacken von gdisk (1.0.6-1.1) ... gdisk (1.0.6-1.1) wird eingerichtet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... + return 0 + echo OK OK + cond_redirect install -m 755 /opt/openhabian/includes/set-partuuid /usr/local/sbin + [[ -n '' ]] + echo -e '\n\033[90;01m$ install -m 755 /opt/openhabian/includes/set-partuuid /usr/local/sbin \033[39;49;00m' $ install -m 755 /opt/openhabian/includes/set-partuuid /usr/local/sbin  + install -m 755 /opt/openhabian/includes/set-partuuid /usr/local/sbin + return 0 + [[ -n '' ]] + dest=/dev/sda ++ blockdev --getsize64 /dev/sda blockdev: cannot open /dev/sda: Datei oder Verzeichnis nicht gefunden + [[ -n '' ]] + echo 'FAILED (bad destination)' FAILED (bad destination) + return 1 + install_cleanup ++ timestamp ++ date +%F_%T_%Z + echo -n '2021-09-26_15:06:11_CEST [openHABian] Cleaning up... ' 2021-09-26_15:06:11_CEST [openHABian] Cleaning up... + cond_redirect systemctl -q daemon-reload + cond_redirect apt-get clean + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get clean \033[39;49;00m' $ apt-get clean  + apt-get clean + return 0 + cond_redirect apt-get autoremove --yes + [[ -n '' ]] + echo -e '\n\033[90;01m$ apt-get autoremove --yes \033[39;49;00m' $ apt-get autoremove --yes  + apt-get autoremove --yes Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 0% Paketlisten werden gelesen… 45% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 52% Paketlisten werden gelesen… 62% Paketlisten werden gelesen… 62% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 97% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 98% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… 99% Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 0% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 50% Abhängigkeitsbaum wird aufgebaut… 99% Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… 0% Statusinformationen werden eingelesen… Fertig 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 1 nicht aktualisiert. + return 0 + echo OK OK + cd /home/int5749 [?2004hroot@Debian:/home/int5749# cut -d: -f1 /etc/passwdcut -d: -f1 /etc/passwd [?2004l root daemon bin sys sync games man lp mail news uucp proxy www-data backup list irc gnats nobody _apt postfix sshd systemd-timesync systemd-network systemd-resolve messagebus systemd-coredump int5749 openhabian avahi-autoipd avahi Debian-exim [?2004hroot@Debian:/home/int5749# exit [?2004l exit [?2004h]0;int5749@Debian: ~int5749@Debian:~$ logout [?2004l