Finally added link via Item setup 

2019-11-24 20:51:07.250 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Channel zwave:device:77371ce0:node65:sensor_door linked - polling started.

2019-11-24 20:51:07.252 [.ItemChannelLinkAddedEvent] - Link 'Test_65_Door-zwave:device:77371ce0:node65:sensor_door' has been added.

2019-11-24 20:52:07.954 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Application Command Request (ALIVE:SET_ASSOCIATION)

2019-11-24 20:52:07.956 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Incoming command class COMMAND_CLASS_ALARM, endpoint 0

2019-11-24 20:52:07.958 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: SECURITY not supported

2019-11-24 20:52:07.960 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Received COMMAND_CLASS_ALARM V4 NOTIFICATION_REPORT

2019-11-24 20:52:07.963 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: NOTIFICATION report - 0 = 0, event=22, status=255, plen=0

2019-11-24 20:52:07.966 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: Alarm Type = ACCESS_CONTROL (0)

2019-11-24 20:52:07.968 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got an event from Z-Wave network: ZWaveAlarmValueEvent

2019-11-24 20:52:07.971 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_ALARM, value=255

2019-11-24 20:52:07.973 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:07.975 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 22, type OpenClosedType

2019-11-24 20:52:07.978 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating channel state zwave:device:77371ce0:node65:sensor_door to OPEN [OpenClosedType]

2019-11-24 20:52:07.983 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:07.986 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 22, type OnOffType

2019-11-24 20:52:07.988 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Commands processed 1.

2019-11-24 20:52:07.990 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@1770e9.

2019-11-24 20:52:23.751 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Application Command Request (ALIVE:SET_ASSOCIATION)

2019-11-24 20:52:23.754 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Incoming command class COMMAND_CLASS_ALARM, endpoint 0

2019-11-24 20:52:23.756 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: SECURITY not supported

2019-11-24 20:52:23.759 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Received COMMAND_CLASS_ALARM V4 NOTIFICATION_REPORT

2019-11-24 20:52:23.762 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: NOTIFICATION report - 0 = 0, event=23, status=255, plen=0

2019-11-24 20:52:23.764 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: Alarm Type = ACCESS_CONTROL (0)

2019-11-24 20:52:23.767 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got an event from Z-Wave network: ZWaveAlarmValueEvent

2019-11-24 20:52:23.770 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_ALARM, value=255

2019-11-24 20:52:23.773 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:23.776 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 23, type OpenClosedType

2019-11-24 20:52:23.779 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating channel state zwave:device:77371ce0:node65:sensor_door to CLOSED [OpenClosedType]

2019-11-24 20:52:23.783 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:23.786 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 23, type OnOffType

2019-11-24 20:52:23.789 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Commands processed 1.

2019-11-24 20:52:23.792 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@228b86.

2019-11-24 20:52:24.964 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Application Command Request (ALIVE:SET_ASSOCIATION)

2019-11-24 20:52:24.966 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Incoming command class COMMAND_CLASS_ALARM, endpoint 0

2019-11-24 20:52:24.969 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: SECURITY not supported

2019-11-24 20:52:24.972 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Received COMMAND_CLASS_ALARM V4 NOTIFICATION_REPORT

2019-11-24 20:52:24.976 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: NOTIFICATION report - 0 = 0, event=22, status=255, plen=0

2019-11-24 20:52:24.979 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: Alarm Type = ACCESS_CONTROL (0)

2019-11-24 20:52:24.982 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got an event from Z-Wave network: ZWaveAlarmValueEvent

2019-11-24 20:52:24.985 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_ALARM, value=255

2019-11-24 20:52:24.988 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:24.992 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 22, type OpenClosedType

2019-11-24 20:52:24.995 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating channel state zwave:device:77371ce0:node65:sensor_door to OPEN [OpenClosedType]

2019-11-24 20:52:25.000 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:25.004 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 22, type OnOffType

2019-11-24 20:52:25.007 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Commands processed 1.

2019-11-24 20:52:25.010 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@103be91.

2019-11-24 20:52:26.175 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Application Command Request (ALIVE:SET_ASSOCIATION)

2019-11-24 20:52:26.178 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Incoming command class COMMAND_CLASS_ALARM, endpoint 0

2019-11-24 20:52:26.181 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: SECURITY not supported

2019-11-24 20:52:26.184 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Received COMMAND_CLASS_ALARM V4 NOTIFICATION_REPORT

2019-11-24 20:52:26.187 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: NOTIFICATION report - 0 = 0, event=23, status=255, plen=0

2019-11-24 20:52:26.189 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: Alarm Type = ACCESS_CONTROL (0)

2019-11-24 20:52:26.193 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got an event from Z-Wave network: ZWaveAlarmValueEvent

2019-11-24 20:52:26.195 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_ALARM, value=255

2019-11-24 20:52:26.198 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:26.201 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 23, type OpenClosedType

2019-11-24 20:52:26.204 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating channel state zwave:device:77371ce0:node65:sensor_door to CLOSED [OpenClosedType]

2019-11-24 20:52:26.208 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:26.212 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 23, type OnOffType

2019-11-24 20:52:26.216 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Commands processed 1.

2019-11-24 20:52:26.220 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@16fadf9.

2019-11-24 20:52:28.602 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Application Command Request (ALIVE:SET_ASSOCIATION)

2019-11-24 20:52:28.605 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: Incoming command class COMMAND_CLASS_ALARM, endpoint 0

2019-11-24 20:52:28.607 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 65: SECURITY not supported

2019-11-24 20:52:28.610 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 65: Received COMMAND_CLASS_ALARM V4 NOTIFICATION_REPORT

2019-11-24 20:52:28.613 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: NOTIFICATION report - 0 = 0, event=22, status=255, plen=0

2019-11-24 20:52:28.616 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 65: Alarm Type = ACCESS_CONTROL (0)

2019-11-24 20:52:28.619 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got an event from Z-Wave network: ZWaveAlarmValueEvent

2019-11-24 20:52:28.622 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_ALARM, value=255

2019-11-24 20:52:28.625 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:28.628 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 22, type OpenClosedType

2019-11-24 20:52:28.631 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 65: Updating channel state zwave:device:77371ce0:node65:sensor_door to OPEN [OpenClosedType]

2019-11-24 20:52:28.635 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter processing NOTIFICATION

2019-11-24 20:52:28.638 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 65: Alarm converter NOTIFICATION event is 22, type OnOffType

2019-11-24 20:52:28.640 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Commands processed 1.

2019-11-24 20:52:28.643 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 65: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@3e1985.