This thread is to collect Milestone 6 issues.

Hello, I can confirm the hue issue in M6 release. I get an unuseable system after upgrading. If I remove the hue things it becomes normal again, but after including only one hue thing, logfile will be spammed with hue events and CPU consumption is 100% an memory is increasing over 5GB. [grafik] …

[image] Ingo_Bruland: I can confirm the hue issue in M6 release Please open an issue on GitHub. [image] openhab/openhab2-addons This is an archive of the full history of the openhab2-addons repo. - openhab/openhab2-addons

Yes I know. But since I only use that binding for cosmetic purposes the need to update is somewhere at the bottom of my TODO-list.

[image] Bruce_Osborne: Just stock setup by openHABian. For openHABian Xms/Xmx defaults are 250/350 which is fine for a 1GB ARM system and on x86 or ARM boxes with more mem probably not more harmful than the defaults. [image] What -Xms (and -Xmx) options do you use? D…

[image] stfn82: For openHABian Xms/Xmx defaults are 250/350 which is fine for a 1GB ARM system and on x86 or ARM boxes with more mem probably not more harmful than the defaults. Actually, on this recent install on a Pi 3B+ the OPTS is blank. I inslled Java using openHABian, used apt to instal…

I’ve seen Java go to 100% and stay there, too. First I’ve seen a number of 2019-12-08 14:40:19.398 [WARN ] [me.core.internal.events.EventHandler] - Dispatching event to subscriber 'org.openhab.core.events.internal.EventBridge@ffb7f8' takes more than 5000ms. until I restarted. Now this time (and …

[image] mstormi: the following ZWave error I’m not keen to discuss issues here where it’s mixed up with so many other issues. If there’s a problem, please create a thread and I’m happy to look at it. However the thread full error is an effect, not the cause.

MQTT Link Number item - items missing I configured a number type channel for a generic MQTT thing using paper ui When I add a link to this channel, I expect all number type items of my things to be listed. But the list is empty and I have only the choice to create a new item. This works perfectly…

Hi, me again… I have now rebuilt a new machine from scratch and when I restore my openhab backup from the other machine, I get the same java error as on the old machine:-( Conclusion is then I guess that there is something in my config that is not “right” even if M4 is happy about it… 2019-12-08 1…

openHAB Community

2.5 Milestone 6 Issues

Setup, Configuration and Use Installation

berni (Berni) December 8, 2019, 1:30pm 100

Made a quick dirty fix for the Broadlink binding for M6: Broadlink binding for RMx, A1, SPx and MP. Any interest? - #908 by berni