The problem I have is as follows. The remotes for my garage door openers do not work. My first HA project was to wifi enable my garage door opener which I did with a Raspberry Pi wired to a relay and WebIOPi. Over time this setup became more sophisticated but there is still one problem, on my wife’s…

My FritzBox sets up automaticly fixed IP’s! You have to increasing the nh-check interval! BUT GOOD NEWS, you can deactivate amazon app notifications for the Dash Button.

In OpenHAB2 i can set the interval manually :slight_smile:[image]

Hi everyone, I’m new to OpenHab, and I’m trying to figure out if it will suit my needs. Support for Amazon Dash buttons is fairly integral to my plans. I currently run scripts which listen for the Dash buttons to log onto the network and execute commands (turn Hue lights on/off), and I’m looking f…

Looking at one-year-old original post from @rlkoshak I see, that Apple made a good progress since then - in iOS10 you just swipe lock screen up - and here you are with all your Homekit buttons. Or just say - “Siri, open the garage door”. So the number of steps was greatly reduced since then. And you…

I don’t personally use Apple products so I have no idea. I do something similar (have for years) on my Android using Tasker. Even a Siri solution would not meet the WAF (she does use Apple products) so I’ve not pursued any Homekit integration. And I try to avoid any solution that is locked into any …

Thankyou for your binding, I am a beginner on openHAB2 (2.0.0 online SNAPSHOT build560 ubuntu14.04. I have the dash button reporting to the openhab log, but cannot get the dash button to trigger a rule. Please could your wiki code include sample Item and rule definitions to perform a simple task? I…

[image] steve098: Please could your wiki code include sample Item and rule definitions to perform a simple task? I recommend looking at the Items and Rules documentation. http://docs.openhab.org/features/items.html http://docs.openhab.org/features/automation/ruledsl.html You do not say wha…

Thankyou for a prompt reply, sorry for not being clear. Pressing RunCode1 element (button) on the sitemap works fine - the rule is triggered, executeCommandLine is run and the script runs. I get this in the logfile for GUI button press: 16:14:01.290 [INFO ] [smarthome.event.ItemCommandEvent …

[image] steve098: It is probably my lack of understanding in how to process .event.ChannelTriggeredEvent (as triggered by the Dash Button) as opposed to .event.ItemCommandEvent (as triggered by the GUI button). Properly configured there is no difference as far as the Rules are concerned. Yo…

openHAB Community

Amazon Dash Button as openHAB Trigger

Tutorials & Examples

oliver (Oliver Libutzki) October 28, 2016, 6:55pm 40

I developed an Amazon Dash button binding for openHAB 2: http://docs.openhab.org/addons/bindings/amazondashbutton/readme.html