Broadlink / Floureon/Hysen-Thermostat Binding

PeWi · March 29, 2020, 11:09am

Hi,
I am on this topic for a while now. Unfortunately the BEOK WIFI thermostate for floor water heating seem to be sold out. I orderd an apparently identical one from BECA: BHT-1000 but unfortunately this one seem not to use the Broadlink chipset. It identifes as ESP_D76859 in the network.
Is there any chance to get this integrated to opemhab2 ?

Edit:
Now I know its a TUYA Device and the network name is only a part of the MAC address…
Seems using the cloud is the only option

thank you for any help

bachel1 · May 9, 2020, 8:20am

Hi
Is their a list what Thermostad is working ?

Joerg_Schreiner · May 9, 2020, 8:41am

Hi,
devices with Tuya should be able to be flashed with other firmware. See:
Mikes Thermostat
Joerg

poki123 · July 5, 2020, 1:48pm

Hello Florian,

could you please add the ability od ADJ settings change, please?
Im unable to get it works :-(.

Thank you very much
J.

Ruben_Perez · October 19, 2020, 3:49pm

Hi all, first of all, thanks a lot to @flo-02-mu Florian for developing this addon.

I have following this post time ago, but not until now I have decided to use it. I have some questions, that would be happy to know before use the addon. I will use it with a Beok thremostat. I don’t know yet if it works, but I hope that yes!

The questions are:

I have found several binding versions, I supose that the last one (0.1.10) are the correct to use more debbuged one. The one that is on the first post is 0.1.7.
Is the binding able to send commands to the thermostat? Or only to read temp, state, etc? I would to do the automation of switch on/off based on OpenHAB, so I need to send commands to it.
And the last one: There is some documentation to create things and items? I will use the discovery to recover the parameters of thermostat (I know the IP, but not key, etc), but once done it, I will prefer to make the things and items manually.

Thanks a lot in advance.
Ruben

Ruben_Perez · October 20, 2020, 8:39am

Well, I have tested it… and all works perfectly. I have installed last version found on thread (0.1.10), auto discovered the thermostat at first attempt watching the log. I have created manually a .items (not things, I used the things created by autodiscover).

My only doubt… can I switch on or off the thermostat from the OH? Or is a “read only” addon?

Thanks a lot in advance!
Ruben

Ruben_Perez · October 20, 2020, 8:43am

Well… it seems to actuate to Beok Thermostat… but not sure… or some strange interaction with Beok App. Also don’t understand very well about “auto” / “manual” mode, because I have actually in “auto” mode, but message from Beok inform that is on “manual”, but changing it, seems to change on thermostat…

Edited:
Very good, it is working also to send comands to the thermostats.

Thanks again to @flo-02-mu Florian. I think that this binding must be on OpenHAB official bindings.

Ruben

xlemassacre · November 19, 2020, 9:36pm

@flo-02-mu I’m using your binding a few weeks now and it’s working really great.
Will you port this binding to the upcoming openhab 3 release?

flo-02-mu · November 19, 2020, 10:13pm

If somehow possible, yes. As I am using 4 of these devices on my own, I have a high interest in upgrading as well. The issue is: The work relies on a 3rd party library (GitHub - mob41/broadlink-java-api: A clean Broadlink API for Java) that is not yet java 11 compatible. There are PRs out though. If there is no movement, I might need to for the lib and bundle it directly. The issue with the library is also that it is reverse engineered and that’s why it is probably hard to include it into OH directly.
I was also thinking about integrating it into the other broadlink binding, but that one has a totally different focus. So maybe I’ll rename mine to just narrow it down to the thermostats. Let’s see. Somehow this binding will continue.

xlemassacre · November 20, 2020, 5:05pm

That’s good news. Sounds like a lot of work though. Thanks for the effort that are putting in that binding!

_tobi · November 20, 2020, 11:15pm

Shouldnt be OH3 compatible to all OH2 bindings? So it might work or not?
But a “stand alone” binding would be great to. Maybe u can intigrate it offical to OH

flo-02-mu · December 6, 2020, 4:50pm

I finally took the action to create a PR: https://github.com/openhab/openhab-addons/pull/9260
Build that is supposed to work with Openhab 3.0 is available for download at https://github.com/flo-02-mu/openhab2-addons/releases/tag/0.2.0

flo-02-mu · December 6, 2020, 4:51pm

could you please add the ability od ADJ settings change, please?
Im unable to get it works :-(.

I might pick up feature work again if the binding got integrated into openhab.

_tobi · January 8, 2021, 11:35pm

hi =)
can u take a look at this. sometimes it comes every few minutes. sometime hours without ?!

2021-01-09 00:31:01.053 [ERROR] [al.handler.FloureonThermostatHandler] - Error while retrieving data for broadlinkthermostat:floureonthermostat:34021da816

java.lang.ArrayIndexOutOfBoundsException: Index 34 out of bounds for length 0

at com.github.mob41.blapi.pkt.cmd.hysen.BaseHysenCommand.execute(BaseHysenCommand.java:38) ~[bundleFile:?]

at com.github.mob41.blapi.dev.hysen.BaseHysenDevice.getAdvancedStatus(BaseHysenDevice.java:102) ~[bundleFile:?]

at org.openhab.binding.broadlinkthermostat.internal.handler.FloureonThermostatHandler.refreshData(FloureonThermostatHandler.java:192) [bundleFile:?]

at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:515) [?:?]

at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:305) [?:?]

at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:305) [?:?]

at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) [?:?]

at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) [?:?]

at java.lang.Thread.run(Thread.java:834) [?:?]

flo-02-mu · February 13, 2021, 10:28am

FYI, the PR for the binding has been merged, so with release 3.1 it will officially be part of openhab. And thanks to the code review there are some improvements under the hood.

Ruben_Perez · February 16, 2021, 8:40am

Congratulations!!!

Josep_Xavier_Sellart · August 30, 2021, 6:27pm

You found some solution

poki123 · September 5, 2021, 3:05am

Hello Florian,

the temperature offset “temperature offset” is not changing the value.
After refreshing data from thermostat, the value is changed back.
Is it possible to fix it please? I’m novic in Java, and i can’t to fix it :-(.

Thank you very much,
Juraj

serion · March 20, 2023, 7:50pm

Hey,

is there solution for the COMMUNICATION_ERROR
“Error while retrieving data for broadlinkthermostat:floureonthermostat:Temp: Index 34 out of bounds for length 0”?

Christoph

Smart_Homer · August 6, 2023, 8:42am

Unfortunatly i was upgrading from OH3.3 to 4.0 before i used the binding from there: https://community.openhab.org/t/broadlink-binding-for-rmx-a1-spx-and-mp-any-interest/22768/1557

unfortunatly at the moment OH is unable to find my rm3mini [FW v44057] device via scanning. Adding manually will show it online but activating learning mode does not work.

extract openhab.log:
2023-08-06 08:39:17.951 [WARN ] [com.github.mob41.blapi.BLDevice ] - RM2 enter learning received error: fffffffb / -5

extract openhab.events.log
2023-08-06 08:39:17.910 [INFO ] [openhab.event.ItemCommandEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ received command ON
2023-08-06 08:39:17.911 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item ‘Rm_Universal_Device_Learning_Mode’ predicted to become ON
2023-08-06 08:39:17.911 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:17.911 [INFO ] [openhab.event.ItemStateChangedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ changed from OFF to ON
2023-08-06 08:39:17.914 [INFO ] [openhab.event.ItemCommandEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ received command ON
2023-08-06 08:39:17.915 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item ‘Rm_Universal_Device_Learning_Mode’ predicted to become ON
2023-08-06 08:39:17.915 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:17.918 [INFO ] [openhab.event.ItemCommandEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ received command ON
2023-08-06 08:39:17.918 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item ‘Rm_Universal_Device_Learning_Mode’ predicted to become ON
2023-08-06 08:39:17.918 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:17.920 [INFO ] [openhab.event.ItemCommandEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ received command ON
2023-08-06 08:39:17.921 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item ‘Rm_Universal_Device_Learning_Mode’ predicted to become ON
2023-08-06 08:39:17.921 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:17.952 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:17.968 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:17.986 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:18.004 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:19.354 [INFO ] [openhab.event.ItemCommandEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ received command OFF
2023-08-06 08:39:19.354 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item ‘Rm_Universal_Device_Learning_Mode’ predicted to become OFF
2023-08-06 08:39:19.355 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to OFF
2023-08-06 08:39:19.355 [INFO ] [openhab.event.ItemStateChangedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ changed from ON to OFF
2023-08-06 08:39:24.494 [INFO ] [openhab.event.ItemCommandEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ received command ON
2023-08-06 08:39:24.495 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item ‘Rm_Universal_Device_Learning_Mode’ predicted to become ON
2023-08-06 08:39:24.496 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON
2023-08-06 08:39:24.496 [INFO ] [openhab.event.ItemStateChangedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ changed from OFF to ON
2023-08-06 08:39:24.513 [INFO ] [openhab.event.ItemStateUpdatedEvent ] - Item ‘Rm_Universal_Device_Learning_Mode’ updated to ON

Any Idea how to tell the Binding using coirrect version of device?