[BTicino/OpenWebNet] New openHAB2 binding ready for testing

[massi (Massimo)]

@gozilla01

Are you sure the percentages are not reversed?
You indicate:
100% closed (minimum light)
0% open (maximum light)

Hi Michele,
This is not a binding decision, but a openHAB decision: see here

Item Name	Main Data Type	Additional Data Types Conversions
Rollershutter	PercentType	UpDownType - UP if the shutter level indicated by the percent type equals 0, DOWN if it equals 100, and UnDefType.UNDEF for any other value
so for OH2, and not only for my binding, UP=0%, DOWN=100% for a Rollershutter item.
If you think about Rollershutter = sun shade (tenda da sole), this makes sense.
I suggest you discuss this in the other threads about HomeKit integration (i do not use HomeKit for now so I cannot test it).
Bye
M

[massi (Massimo)]

@gozilla01

when pervades the implementation of your binding (beta 9 and beta 10)?

@gozilla01, @fmalfatto : a very draft roadmap of the binding is here, but it can be changed anytime…

For what is not planned yet, some new other volunteer developers are very welcome to contribute!

[massi (Massimo)]

@rubenfuser

after openhab service restart, all my rollershutters are showed in sitemap as (for example) “Tapparella Sala -%”.
i also see temperature settings (automatic-manual-antigelo and so on) are not saved after openhab restart…it’s only saved my manual “set_temp” item.

this is normal and the right thing to do, because after a OH2 restart the state of the devices could have be changed meanwhile , so OH2 does not know the position of the rollershutter anymore, for example.
In any case there is already an issue about this point, but there are good reasons and bad reasons to wait for an update from the BUS before updating the device state after a restart.

@rubenfuser

also i got in “openhab.log” an error showing all my openwebnet items ad duplicate, and each item is reported as duplicate for 3-4 times.

is very difficult to understand what is going on and if there is any error without seeing you log at DEBUG level. Read here.

bye
m

[gozilla01 (Michele)]

@massi

@gozilla01, @fmalfatto : a very draft roadmap of the binding is here, but it can be changed anytime…

I understand very well the private and work needs.
I saw that the issues 12 AUX there is no planning.

I wondered if it was possible to anticipate AUX.

@massi

so for OH2, and not only for my binding, UP=0%, DOWN=100% for a Rollershutter item.
If you think about Rollershutter = sun shade (tenda da sole), this makes sense.
I suggest you discuss this in the other threads about HomeKit integration (i do not use HomeKit for now so I cannot test it).
Bye
M

I abandoned the OH Homekit binding, too much time without knowing anything and no response to posts.
I switched to Node-Red to interface your Openwebnet with Ios.
I will modify the Node-red function to reverse the Rollershutter recognition.

[gozilla01 (Michele)]

@massi

I configured the development environment in windows, I would like to play with openwebnet.
Where can I find the sources for your 0.9.16 library?

[gozilla01 (Michele)]

I’ve opened a new topic on Aux

New topic for the expansion of the AUX commands

[rubenfuser (Ruben)]

hello Massimo, finally i’ve connected my raspberry back to my LCD/gateway…everything seem to be okay, but i’ve found another “issue”. after openhab service restart, excet blinds that not show the right position, also thermostat settings are not kept with the last setting used. i mean if it’s in manual, automatic, anti-freeze…
i’ve set everything (*) to persist file but these settings aren’t saved. because if i have to restart openhab daily, and i have scheduled at 9am to send up to rollershutter, it doesn’t work correctly.
i suggest to allow to persist for everything (temperature/shutters) at least if i don’t want to persist, i will exclude items i don’t want to. but just give us the possibility to decide this is just a suggestion

another question, is the translation of thermostat settings. have to transform to a map file to make the translation possible?

last: with my thermostats, anti-freeze, normal, off aren’t reported correctly. with one thermostat, normal is reported as anti-freeze. tell me how can help you more…

thanks for all!

edit: here one error, but maybe it’s related to homekit plugin…

2018-12-06 13:44:15.820 [ERROR] [al.accessories.HomekitThermostatImpl] - Unrecognized heating cooling target mode: off. Expected cool, heat, auto, or off strings in value.

[Marcello_Chiara]

Good morning and thank you for the excellent work done.

I have a problem related to this binding, until yesterday everything worked but I had to turn off the rasberry and after restarting all the BTICINO devices were “off line”. The impression is that some service does not start automatically but I’m not expert and I can not figure out where the problem is.

Thanks in advance

Marcello

[massi (Massimo)]

@Marcello_Chiara without more info on your setup (which OH2 version? which binding version?) is difficult to understand what is happening.
Did you check the log?
check: http://openhabianpi.local:9001
m

[col_1958 (Marco Colombini)]

E Hi Massimo,

Hope the project is still active. I am planning to install at home a myhome setup. At this very moment I have bought most of the hardware. During next holidays I am planning to actually start installation. The myhome system is based on mhserver1 as a gateway. I am wishing:

1. to control three sun blinds somfy RTS via a dry contact transmitter 1810135 and a f411u2 (general command for up, down, stop)
2. to control three wired somfy blinds via f401
3. to control a bticino alarm set 4200
4. to control lights … still to think about them
5. to integrate everything with Alexa via openhab on raspberry and your binding.

Hope the project is feasible.

I’m an amateur electrician with a good knowledge of Linux and a long experience in programming in many languages. I am a newbie of raspberry but I am a fast learner.

If there is something in my setup that can be of interest, I will be happy to be a tester, please let me know. I am also interested in knowing about Alexa’s Italian skill for Openhab. Do you know about the state of the art of the project?

Marco

[Marcello_Chiara]

Sorry Massimo,

The version of OpenHab is “2.3.0” and the binding version is “2.4.0 B7”.

below what happens when I try to light a ligth:

2018-12-11 19: 45: 11.954 [ome.event.ItemCommandEvent] - The ‘Faretti_Cameretta’ element received the OFF command

==> /var/log/openhab2/openhab.log <==

2018-12-11 19: 45: 11.970 [WARN] [ebnet.handler.OpenWebNetThingHandler] - == OWN: ThingHandler == Gateway is NOT connected, setting thing = openwebnet: bus_on_off_switch: 9c386ce5: 32 to OFFLINE

==> /var/log/openhab2/events.log <==

2018-12-11 19: 45: 11.972 [vent.ItemStateChangedEvent] - Faretti_Cameretta has changed from ON to OFF

I’m sure the webserver is on and reachable because if I use the “openwebnet” APP I can manage the system.

Thanks
Marcello

[gozilla01 (Michele)]

@Marcello_Chiara
The Openwebnet binding is active.
Massimo is implementing CEN and CEN +
Currently the AUX and alarm commands are not implemented.
Soon it will be official on OpenHab, read beta8, the beta8 has no CEN, CEN + see link
For AUX I implemented on 1.X bindings see link
For Alarm I do not know …

I use MH202 with Bticino works well with Openwebnet 2.x co of @massi.

[Marcello_Chiara]

Thanks Michele,
my problem is that the raspberry does not contact the F504 web server but until 2 days ago all things worked well. They stopped working after the raspberry was turned off.

[gozilla01 (Michele)]

Try re-installing the .jar this
Give the two commands again in consol karaf.
I have on Raspberry 3 version 2.4.0 M8, M8 output today.
Make reboot is public all the log.

[gozilla01 (Michele)]

Hello @massi ,
I am attaching the log with communication error problem, everything is back ok alone

Openhab 2.4.0 M8
Openwebnet beta9-pre2

2018-12-12 15:56:18.663 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 1.

2018-12-12 15:56:19.672 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 2.

2018-12-12 15:56:20.678 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 3.

2018-12-12 15:56:21.685 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 4.

2018-12-12 15:56:22.692 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 5.

2018-12-12 15:56:23.698 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 6.

2018-12-12 15:56:24.727 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 7.

2018-12-12 15:56:25.737 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 8.

2018-12-12 15:56:26.742 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 9.

2018-12-12 15:56:27.747 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 10.

2018-12-12 15:56:28.752 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 11.

2018-12-12 15:56:29.757 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 12.

2018-12-12 15:56:30.762 [WARN ] [sciani.connector.MyHomeJavaConnector] - Monitor connection problem. Attempting retry 13.

2018-12-12 15:56:40.537 [WARN ] [bnet.handler.OpenWebNetBridgeHandler] - ==OWN==  CONNECTION ERROR: Connection error (IOException). Check network and gateway thing Configuration Parameters

==> /var/log/openhab2/events.log <==

2018-12-12 15:56:40.552 [hingStatusInfoChangedEvent] - 'openwebnet:bus_gateway:mybridge' changed from ONLINE to OFFLINE (COMMUNICATION_ERROR): Connection error (IOException). Check network and gateway thing Configuration Parameters

2018-12-12 15:56:40.565 [hingStatusInfoChangedEvent] - 'openwebnet:bus_thermostat:mybridge:LR_thesala' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.596 [hingStatusInfoChangedEvent] - 'openwebnet:bus_thermostat:mybridge:LR_therustico' changed from UNKNOWN: waiting state update... to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.602 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_sala' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.606 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_camera_finestra' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.609 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_salater' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.614 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_camera_scorrevole' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.617 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_cameretta' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.622 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_rustico' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.626 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_entrata' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.632 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_cucina' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.638 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_bagno' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.643 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_cucina' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.646 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_cameretta' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.652 [hingStatusInfoChangedEvent] - 'openwebnet:bus_dimmer:mybridge:mydim_camera' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.658 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_bagno' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.661 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_specchio_bagno' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.664 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_corridoio' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.668 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_comodino_sinistro' changed from UNKNOWN: waiting state update... to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.671 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_comodino_destro' changed from UNKNOWN: waiting state update... to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.673 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_scala' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.676 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_entrata_rustico' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.679 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_rustico' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.683 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_specchio_bagno_rustico' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.686 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_cantina' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.700 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_caldaia' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.703 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_dietro_divano' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.706 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_prima_rustico' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.709 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_bagno_rustico' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.713 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_sala' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.718 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig__piscina' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.722 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_scala_esterna' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.724 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_lavanderia' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.726 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mypul_porta_garage' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.729 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mypul_cancello' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.731 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_garage' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:40.733 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_olivo' changed from ONLINE to OFFLINE (BRIDGE_OFFLINE)

2018-12-12 15:56:43.077 [hingStatusInfoChangedEvent] - 'openwebnet:bus_gateway:mybridge' changed from OFFLINE (COMMUNICATION_ERROR): Connection error (IOException). Check network and gateway thing Configuration Parameters to ONLINE

2018-12-12 15:56:43.088 [hingStatusInfoChangedEvent] - 'openwebnet:bus_thermostat:mybridge:LR_therustico' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.105 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_salater' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.121 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_cameretta' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.135 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_cucina' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.142 [hingStatusInfoChangedEvent] - 'openwebnet:bus_thermostat:mybridge:LR_thesala' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.149 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_cucina' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.156 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_camera_scorrevole' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.164 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_rustico' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.169 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_sala' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.174 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_specchio_bagno' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.181 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_comodino_sinistro' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.186 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_bagno_rustico' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.194 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_sala' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.198 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_specchio_bagno_rustico' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.206 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_camera_finestra' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.211 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_garage' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.223 [hingStatusInfoChangedEvent] - 'openwebnet:bus_automation:mybridge:mytap_bagno' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.227 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_olivo' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.233 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_entrata' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.236 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mypul_porta_garage' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.240 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_bagno' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.245 [hingStatusInfoChangedEvent] - 'openwebnet:bus_dimmer:mybridge:mydim_camera' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.248 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_comodino_destro' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.254 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_corridoio' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.257 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_entrata_rustico' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.262 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_scala' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.267 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_caldaia' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.271 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_rustico' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.274 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_dietro_divano' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.280 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_cantina' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.283 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_lavanderia' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.289 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_prima_rustico' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.292 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig__piscina' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.296 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mypul_cancello' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.302 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_scala_esterna' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

2018-12-12 15:56:43.309 [hingStatusInfoChangedEvent] - 'openwebnet:bus_on_off_switch:mybridge:mylig_cameretta' changed from OFFLINE (BRIDGE_OFFLINE) to ONLINE

[Marcello_Chiara]

HI Michele,

I did it but nothing, “COMMUNICATION_ERROR”.

2018-12-15 11:28:33.276 [hingStatusInfoChangedEvent] - ‘openwebnet:bus_gateway:3e19aa7a’ changed from UNKNOWN to OFFLINE (COMMUNICATION_ERROR).

[gozilla01 (Michele)]

Version Openhab?
Version Openwebnet?
Bus configuration?

[Marcello_Chiara]

The version of OpenHab is “2.3.0” and the binding version is “2.4.0 B7”.
What do you mean by bus configuration ?

[gozilla01 (Michele)]

B7 old
New B9

[gozilla01 (Michele)]

Raspberry configured with static ip?
I use MH202
Raspberry ip control is range on F504.
from rasberry:

ifconfig

Try to postpone the two commands from Karaf console.

feature:install openhab-transport-serial
feature:install esh-io-transport-upnp

These are attempts …