Updated to 2.3.0-SNAPSHOT today and I’m also suffering from
Component descriptor entry ‘OSGI-INF/*.xml’ not found
with network binding.
/Miika
Updated to 2.3.0-SNAPSHOT today and I’m also suffering from
Component descriptor entry ‘OSGI-INF/*.xml’ not found
with network binding.
/Miika
Same problem.
I certainly do. Expect it being fixed by tonight.
Latest distro #1148 is fixed!
Thanks a lot - I will test it tonight.
With #1148 the errors are still present:
2017-12-21 14:46:12.592 [ERROR] [org.openhab.binding.yamahareceiver ] - Component descriptor entry 'OSGI-INF/*.xml' not found
2017-12-21 14:46:12.597 [ERROR] [org.openhab.binding.harmonyhub ] - Component descriptor entry 'OSGI-INF/*.xml' not found
2017-12-21 14:46:15.880 [ERROR] [org.openhab.binding.avmfritz ] - Component descriptor entry 'OSGI-INF/*.xml' not found
2017-12-21 14:46:15.897 [ERROR] [org.openhab.binding.homematic ] - Component descriptor entry 'OSGI-INF/*.xml' not found
I can confirm, loxone binding is working with #1148
I specifically checked homematic, so I very much doubt that you have a clean 1148 install. Check the version of your add-ons.
I now checked with kar files for the addons. That works !
Before i test without local kar files and than i get the errors.
Network binding still not work after upgrade to the latest snapshot version,
[org.openhab.binding.network] - Component descriptor entry ‘OSGI-INF/*.xml’ not found.
openHAB 2.3.0 Build #1149 working!
Hi Olymp,
I’m using openHAB 2.3.0 Build $1149, but network binding still not work, I still get the error [org.openhab.binding.network] - Component descriptor entry ‘OSGI-INF/*.xml’ not found.
I uninstall the network binding and install it again and again, but still not work, I cannot find Network Binding in paper UI > inbox > “Scan for Things”.
Any suggestion?
Thanks
Eric
I do not set up through the papeUI. I’m using a network.things file. Example:
network:pingdevice:ping_google "Google" @ "Net" [ hostname="google.ru", retry=1, timeout=5000, refresh_interval=60000 ]
but you, I think, the problem is not this.
As an option, have you tried clearing the cache and temp?
After you set the binding, do you see it in the karaf?
ssh -p8101 openhab@localhost
bundle:list
Yes, I clear the tmp and cache folder and restart the service, uninstall the network binding and install it again, the network binding show in “bundle:list”, and still have
“[org.openhab.binding.network] - Component descriptor entry ‘OSGI-INF/*.xml’ not found.”
then I try to set “network:pingdevice:iMac_State [ hostname=“192.168.0.6” ]” in the “things” file, but still not work.
may be I need to reinstall openhab2 and whole addon, but I don’t want to setting it up again.
so I’m give up use “network binding”, and use “Network Health Binding” now.
thanks your help.
I still have the problem with the Network- and HarmonyHub-Binding. I’ve updated to
Update 2.3.0.20180102110829-1.noarch.rpm @openHAB-Snapshots
bundle:list says
478 │ Active │ 80 │ 2.3.0.201712172314 │ HarmonyHub Binding
480 │ Active │ 80 │ 2.3.0.201712172314 │ Network Binding
481 │ Active │ 80 │ 2.3.0.201801020943 │ openHAB 1.x Compatibility Layer
So both bindings are there but with a somewhat “old” version and as you see with 481 there also are current versions of other bindings.
Log says
2018-01-03 12:25:50.344 [ERROR] [org.openhab.binding.network ] - Component descriptor entry 'OSGI-INF/*.xml' not found
2018-01-03 12:25:56.894 [ERROR] [org.openhab.binding.harmonyhub ] - Component descriptor entry 'OSGI-INF/*.xml' not found
And both bindings seem not to work (no things created in Paper UI or via thing-file).
I am not sure if it is a problem with updating or both files still miss the changes for the descriptor entry. Has someone a clue?
Is this already fixed in 1251?
I see the following line?
2018-04-06 21:52:39.432 [ERROR] [clipse.smarthome.io.transport.serial] - Component descriptor entry ‘OSGI-INF/*.xml’ not found
I have the same issue after upgrading to 2.3.SNAPSHOT
Build #1251
Seeing the same issue after upgrading
I have it too! But I also created a PR to get it fixed.