Hello, I can’t find any tutorial how to connect devices likes hue bulbs through mqtt to openHAB. I already successfully added Xiaomi devices, just because I receive Information. I used for that MQTT.fx. But now I’m struggling with the bulbs, because I don’t know what I can send/publish to the bulb…

What binding are you using? I use zigbee2mqtt and mqtt but I think you may can use the zigbee binding? @sihui beat me to it. :smile: Also, if you have an Echo Plus you can use that to control the hue lights as it has a zigbee hub inside it.

[image] H102: beat me to it. Only for 10 seconds :grinning:

I’m sorry, I’m using zigbee2mqtt already. I’m interested where do I found the documentation or another way to find this command e.g. { "brightness" : 50 }

Have you read this topic Zigbee2mqtt revisited: No more ugly transformations

[image] H102: Have you read this topic I’m using this for a couple of days now, makes it really easy to connect the channels :+1:

I’m interested in figuring out the channels by myself. The Supported devices page I already discovered. Lets look at e.g.: Philips 9290012573A control via MQTT | Zigbee2MQTT No where is documented this: { "brightness" : 50 }

[image] baum1234: No where is documented this: { "brightness" : 50 } Where are you seeing this?

Well from the beginners tutorial for zigbee2mqtt

Connecting devices through mqtt

Setup, Configuration and Use Beginners

sihui (SiHui) January 3, 2020, 5:11pm 2

HUE bulbs are zigbee, not mqtt.
You first need to connect your bulbs to a mqtt broker, for example through zigbee2mqtt.

If you already have them connected to mqtt, check this page for the channels: