Hi Power-Producers,
as the Informations i get from the API back for my installation … how can i get these additional informations in the connector? For me its in first interesting whats the chargelevel of my battery (soc)
One Response (Partly) of my Account is shown below :
“capacity”: “5kW”,
“model”: “GW5K-ET”,
“output_power”: “389W”,
“output_current”: “1.1A”,
“grid_voltage”: “233.4V/234.3V/232.1V”,
“backup_output”: “233.4V/19W”,
“soc”: “49%”,
“soh”: “100%”,
“last_refresh_time”: “08.29.2021 14:30:31”,
“work_mode”: “Wait Mode”,
“dc_input1”: “232.8V/8.6A”,
“dc_input2”: “0V/0A”,
“battery”: “200.2V/-7.8A/-1562W”,
“bms_status”: “ChargingOfBattery”,
“warning”: “Normal”,
“charge_current_limit”: “18A”,
“discharge_current_limit”: “18A”,
“firmware_version”: 618,
“creationDate”: “08/29/2021 20:30:31”,
“eDay”: 6.6,
“eTotal”: 100.5,
“pac”: 2002.08,
“hTotal”: 304,
“vpv1”: 232.8,
“vpv2”: 0,
“vpv3”: null,
“vpv4”: null,
“ipv1”: 8.6,
“ipv2”: 0,
“ipv3”: null,
“ipv4”: null,
“vac1”: 233.4,
“vac2”: 234.3,
“vac3”: 232.1,
“iac1”: 1.1,
“iac2”: 1,
“iac3”: 1,
“fac1”: 49.99,
“fac2”: 49.99,
“fac3”: 49.99,
“istr1”: 0,
“istr2”: 0,
“istr3”: null,
“istr4”: null,
“istr5”: null,
“istr6”: 13.9,
“istr7”: null,
“istr8”: 12.2,
“istr9”: null,
“istr10”: 11.9,
“istr11”: null,
“istr12”: 0,
“istr13”: 0,
“istr14”: 0,
“istr15”: 0,
“istr16”: 0