Daikin BRP069B4x - New datapoints

New datapoints have been discovered. Is it possible to add them to the binding? … Demand Control (manual) [http://DAIKIN-IP/aircon/set_demand_control?lpw=&en_demand=1&mode=0&type=1&max_pow=[40-100]](http://daikin-ip/aircon/set_demand_control?lpw=&en_demand=1&mode=0&type=1&max_pow=%5B40-100%5D) Demand Control (automatic) [http://DAIKIN-IP/aircon/set_demand_control?lpw=&en_demand=1&mode=2&type=1&max_pow=[40-100]](http://daikin-ip/aircon/set_demand_control?lpw=&en_demand=1&mode=2&type=1&max_pow=%5B40-100%5D) Demand Control (OFF): http://daikin-ip/aircon/set_demand_control?lpw=&en_demand=0 Demand Control (State): http://daikin-ip/aircon/get_demand_control?lpw= More detailed information can be found [here 1](https://github.com/Apollon77/daikin-controller/issues/230)

github.com/openhab/openhab-addons

[daikin] new datapoints

opened 11:45AM - 10 Jul 24 UTC

closed 02:10PM - 10 Jul 24 UTC

Jogobo

enhancement

As Daikin turned off the cloud access on July, 3rd and the developper portal is …more or less a pain in the a**, I wondered if the WLAN-Api could be of more use. So I investigated and came across the following: http://_YOUR_IP_/aircon/get_demand_control returns the DemandControl-Settings available in the Onecta-App. ![Screenshot_20240710-132115](https://github.com/openhab/openhab-addons/assets/62647003/24fd3cce-9426-4d76-9a54-6c7579dd3ced) Executing "get_demand_control" returns the following line: `ret=OK,type=1,en_demand=0,mode=0,max_pow=100,scdl_per_day=4,moc=0,tuc=0,wec=0,thc=0,frc=0,sac=0,suc=0` I identified the following values: - **en_demand**: possible values '0' or '1' for generally disable or enable demand control as seen in the picture at "Bedarfssteuerung aktivieren" - **mode**: possible values '2' = 'AUTO', '1' = 'Schedule', '0' = 'Fixed' (see 'max_pow') - **max_pow**: range from 40 to 100% in steps of 5. When 'mode' is set to '0' 'max_pow' defines the percentage the compressor is allowed to consume - **moc, tuc, ...**: when 'mode' is set to '1' the scheduled demand control settings are displayed. Example: `ret=OK,type=1,en_demand=1,mode=1,max_pow=100,scdl_per_day=4,moc=3,mo1_en=1,mo1_t=720,mo1_p=90,mo2_en=1,mo2_t=840,mo2_p=0,mo3_en=1,mo3_t=600,mo3_p=70,tuc=0,wec=0,thc=0,frc=0,sac=0,suc=0` **moc**: number of scheduled events for Monday (max = 4) **mo**_X_**_t**: Minutes from midnight for entry _X_ **mo**_X_**_p**: Power in percent for entry _X_ **mo**_X_**_en**: '1' = enable demand control, '1' = disable demand control To set the values simply use http://_YOUR_IP_/aircon/set_demand_control with one or more from the above parameters. To enable demand control with a fixed value of 60% just execute http://_YOUR_IP_/aircon/set_demand_control?en_demand=1&mode=0&max_pow=60 in your browser. This works for wireless modules from the B-series like BRP069B4_x_. Maybe a maintainer of this binding can add these additional features to the binding?