violine
(Andre)
July 13, 2024, 8:56am
1
Hello,
I would like to take up this topic again:
https://community.openhab.org/t/daikin-bedarfssteuerung-available-on-local-api-brp069b41/153877
I operate my air conditioning system with the local API via BRP069B42
and Daikin Binding and I am interested in whether the option of limiting power is also available here.
jimtng
(jimtng)
July 14, 2024, 7:31am
2
Is this what you’re looking for? If so, I’m starting to work on the binding to add support for it.
opened 12:06PM - 03 Mar 24 UTC
enhancement
New datapoints have been discovered. Is it possible to add them to the binding?
…
Demand Control (manual)
[http://DAIKIN-IP/aircon/set_demand_control?lpw=&en_demand=1&mode=0&type=1&max_pow=[40-100]](http://daikin-ip/aircon/set_demand_control?lpw=&en_demand=1&mode=0&type=1&max_pow=%5B40-100%5D)
Demand Control (automatic)
[http://DAIKIN-IP/aircon/set_demand_control?lpw=&en_demand=1&mode=2&type=1&max_pow=[40-100]](http://daikin-ip/aircon/set_demand_control?lpw=&en_demand=1&mode=2&type=1&max_pow=%5B40-100%5D)
Demand Control (OFF):
http://daikin-ip/aircon/set_demand_control?lpw=&en_demand=0
Demand Control (State):
http://daikin-ip/aircon/get_demand_control?lpw=
More detailed information can be found [here 1](https://github.com/Apollon77/daikin-controller/issues/230)
violine
(Andre)
July 14, 2024, 3:55pm
3
I followed this link:
https://www.akkudoktor.net/forum/heizungssysteme/daikin-esp32-faikin-modul/
There communication with the Daikin device also takes place via the S21-interface.
Perhaps the transmission is similar or the same?
system
(system)
Closed
August 25, 2024, 7:56am
4
This topic was automatically closed 41 days after the last reply. New replies are no longer allowed.