i have some problems with the RaspBee-Module from Dresden Elektronik. If i use the official Image from Dresden Elektronik all works very well. But with openhabian Image i dont get Access to the Module.
Yes, i add the deconz gateway, put the right ip and press the “Connect App” button into Phoscon. After few seconds the gateway goes online but dont find anything.
I don’t have bulbs only temp, presence and window/door sensors. Into phoscon I can see the right values of the sensors. So I think that the deCONZ works very well. Only the connection to openHAB struggles.
That’s fine. These log settings should bring you something at least
But if you really watch out for items from deCONZ, then you can’t find them, since you simply don’t have items for your deCONZ stuff at this stage. Remember: Things provide channels which can be linked to items…
If everything is well set up, then you could expect your deCONZ-things to be discovered and appearing in the log (and in the INBOX).
Hope that helps.
BUT: If these are new terms for you in relation to openHAB, then you should really read some more in the documentation (check for basic concepts etc.)
On openHAB M1 version auto discovery does not work.
I have had it working on later snapshots, but unsure of the current state of snapshots.
There has been major rework going on lately in the preparations for M2, so my last few attempts using a snapshot resulted in me reverting back to M1.
Anyway, if you have renamed your switches and sensors, the only way to obtain the id number is using the REST-API
Ok, with http://192.168.178.62/api/APIKEY/sensors i get the list with all Items and ids. Now i can add them manually. But i have 2 problems. First the Temperatur is just a little bit high
Temperature 2431.0 °C
If i look into the SensorThingHandler.java i see the Xiaomi Temperatur fix ( temperature / 100 ) - Strange
Secord. I’m not able to add Window/Door-Sensors. All my Presence and Temperatur-Sensors work very well. Do you have any idea?
Edit: If i add the Items via HUE Bidnign Manually all is fine. Did i need the deCONZ binding? It looks like i can all with the Hue Binding. But i dont have all Channels of the Items. Its very bad
should i switch to OH 2.5? Maybe the Binding is better? And all my Windows/Door-Sensors are not able to find. I tested 6 Sensors. They all works like a charm with the original Xiaomi Gateway.
I don’t know what Thing device types you try using?
Again, are you using the correct Thing device type?
Using the HUE binding sensors and switches are polled.
The upside with the deCONZ binding is that is listens on the WEBsocket port where events are pushed.
This reduces data traffic and switch response times.
I’m on 2.5M1 (did you state what version you are on?), but knows that the deCONZ binding has received updates after that, but in order to use it you must try out a snapshot and see how that fares.
This are the Thing i would have in openhab. Some of my Door And Windows Sensors are connected. I switchted my installation to 2.5 Milestone and installed the deCONZ Snapshot 2.5 Binding.