Expected Behavior The readings for temperature and humidity with EEP A5-10-12 should be correct. Current Behavior The readings are incorrect. Please see the drop in temperature and non changing humidity readings after updating from latest openocean version 3.2.0.0 to official Enocean binding 4.0.2. …

The issue was fixed. Installed snapshot version 4.1 and everything is working as expected. [Screenshot_20230831_223236_openHAB] Thanks for the fix! [enocean] Fix humidity and temperature readings for EEP family A5_10 main ← fr…

Ok, I took a look at the EEP which is causing the issue. It looks like that in the latest openocean version (from 2021) the EEP A5-10 was revised but these changes were never merged into the official binding. I think using the enocean binding 4.0.2 as a base and the code from openocean openocean/…

I’m enjoying my holiday and not back before next weekend. If not fixed already, I’ll have a look.

Thank you, this sounds great. Wish you a wonderful holiday :sunny:

@dirkdirk and whom also interessted in, I do also run EnOcean TF Sensors (EEP A5-04-03) and the values for temperatur and humidity have been correct over all OH3 versions and also with OH4 versions 4.0.1 (workaround) and now 4.0.2.

I use some enocean temperature sensors which are NOT EEP A5-10-12 (green line). They are working (A5-10-06) fine. [Screenshot_20230820_233540_openHAB] So it looks like (only?) the A5-10-12 (blue line) is not correct. Daniel ( @fruggy83 ) fixed them some time ago. See here: …

Enocean humidity and temperature readings incorrect in 4.0.2

Add-ons Bindings

dirkdirk (Dirk) August 31, 2023, 8:38pm 7

The issue was fixed. Installed snapshot version 4.1 and everything is working as expected.

Thanks for the fix!

Beginners guide for implementing Eltako FSR14, FSB14, FUD14 via FGW14