Oliver2
(Oliver)
January 3, 2021, 11:41pm
1
Raspberry Pi4 4GB
Fresh installation of v1.6.2 Image / openhab-config v1.6.2-1087
openhabian-config Menu #14 (Update file permissions of commonly used files and folders) creates the following error:
Applying file permissions recommendations... FAILED (samba and 3rd party logdir)
What can I do to provide more information?
---
layout: documentation
title: openHABian
source: https://github.com/openhab/openhabian/blob/master/docs/openhabian-DEBUG.md
---
<!-- Attention authors: Do not edit directly. Please add your changes to the appropriate source repository -->
This document is meant to give a guiding hand to users when their openHABian
install fails either on initial image installation or later on when running menu
options that install or configure optional components.
TL;DR:<br>
set `debugmode=maximum`in `/etc/openhabian.conf` and see `/boot/first-boot.log` for
image installation else record the terminal output.<br>
Do not ask for help on the forum unless you have FULLY read this guide.
**Attention:**
If you do not use the image but use `openhabian-config` manually - either to run
`openhabian-config unattended` or interactive use -, **there is no logfile**.
This file has been truncated. show original
There will be times when you discover a bug in OH. This tutorial explains how to file an issue so the developers can know about the bug and hopefully fix it.
Do I Have a Bug?
openHAB is a complex system with lots of options and ways to configure various capabilities. As the old saying goes, openHAB gives you a lot of rope with which to hang yourself.
So how do I as an average user know whether I’ve done something wrong or if there is a bug? The good news is we don’t expect you.
Step 1: Ask fo…
Set debug mode to maximum then try again it may give you a better reason than Failed.
Oliver2
(Oliver)
January 4, 2021, 12:18am
3
I see. Error comes up because it accesses some ZRAM directories but ZRAM is disabled on my device.
Wolfgang_S
(Wolfgang_S)
January 4, 2021, 11:41am
4
Oliver2
(Oliver)
January 4, 2021, 11:50am
5
You’re right. I checked Github before posting but waited for a day. Meantime the issue was raised…