Hi there, I’ve just recently bought a Eurotronic Spirit Z-Wave thermostat. While inclusion an reading values goes quite smoothly I cannot set any values (e.g. temperature setpoint). The logfile shows an error: 2018-04-15 17:36:16.434 [ome.event.ItemCommandEvent] - Item ‘Thermostat_SetpointHeat’ re…

That was a good idea to check that as I had not but I have those both off. Adding pic to make sure we are talking about the same thing. [Screenshot_20180718-075820_Chrome] I have also tried adding them via PaperUI and Habmin with same results.

[image] fifo: Adding pic to make sure we are talking about the same thing Yes - that’s what I was talking about. I’m not sure then - sorry. If the thing is coming back after it’s deleted, and adding channels etc,then I guess something in the core is not deleting the data. The only other thin…

Ok I can remove now and wait till afternoon to add back. I’ll take a look at the jsondb as well (although I’m not too familiar with an easy way to search in there) to make sure it’s not there and go from there. If that doesn’t work I will try removing the node and see if that works. I’ll let you kno…

Ok so I looked through the jasondb thing and items files and I found nothing. There was no mention of the thermostat which is good. I went ahead and added the thing and again, it populated all the items. So I thought ok its weird but let’s go with it. I tested again and nothing still not working. I …

Did you create the items in a file or using PaperUI? If in a file, could you please post them?

@5iver I created everything with PaperUI. @chris The only thing that catches my eye as a warning is this below but it doesn’t seem like that would cause an error as the thermostat value I assume should be a decimal. I messaged you a bigger section of the debug output. 2018-07-19 07:46:43.654 [WARN…

Moving to this thread as it seems others are having the same issue. honeywell-zwave-thermostat-in-openhab2

Are you sure you are using the latest development binding? This error should not occur like this in the latest binding, so I’m suspicious that you are using an older one?

[image] fifo: Moving to this thread as it seems others are having the same issue. honeywell-zwave-thermostat-in-openhab2 Can I suggest let’s keep the discussion here. The other thread seems to be talking about serial port problems and other issues -we’ll end up going backwards if we’re not c…

openHAB Community

Eurotronic Spirit Z-Wave errors

Add-ons Bindings

chris (Chris Jackson) July 19, 2018, 6:57am 17

Please use the latest binding, and check the debug logs during the binding initialisation to see if there are any errors during the thing handler initialisation.

Eurotronic Spirit Zwave Plus thermostats not being initialized