Exec Binding script for 1wire temps on OpenHABianPi GPIO

[dijit]

Tutorial Created:

GPIO 1-Wire Temp sensors on Raspberry Pi with openHABian

This tutorial explains how to connect multiple Maxim DS18b20 1-wire temperature sensors to a GPIO pin on a Raspberry Pi, and pull those temperature readings into OpenHAB. This is a re-write of my previous post on this issue, which includes problems I ran into, and how I fixed them: Exec Binding script for 1wire temps on OpenHABianPi GPIO I have also posted a longer version on my blog, which is a bit more…“bloggy”…: Step 1: Install and configure openHABianPi For this tutorial, I used the o…

I had some trouble with formatting though, as the “Heading” and “Bold” tags refused to work on a few sections. I will attempt to fix this with an edit.

Thanks again for the guidance @ThomDietrich