Fibaro flood sensor: tamper alarm not reported

Hi,

the issue seems to be still present in openHAB v3.1.0. I have attached also the Thing properties in the hope that someone could spot any abnormalities.

2022-01-24 09:31:54.042 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0D 00 04 00 08 07 9C 02 08 00 FF 00 00 90 
2022-01-24 09:31:54.045 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 07 9C 02 08 00 FF 00 00 
2022-01-24 09:31:54.047 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 07 9C 02 08 00 FF 00 00 
2022-01-24 09:31:54.051 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2022-01-24 09:31:54.051 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Application Command Request (ALIVE:DONE)
2022-01-24 09:31:54.052 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: resetResendCount initComplete=true isDead=false
2022-01-24 09:31:54.053 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Incoming command class COMMAND_CLASS_SENSOR_ALARM, endpoint 0
2022-01-24 09:31:54.054 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: SECURITY not supported
2022-01-24 09:31:54.055 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Received COMMAND_CLASS_SENSOR_ALARM V1 SENSOR_ALARM_REPORT
2022-01-24 09:31:54.056 [DEBUG] [ndclass.ZWaveAlarmSensorCommandClass] - NODE 8: Alarm Report: Source=8, Type=General(0), Value=255
2022-01-24 09:31:54.057 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got an event from Z-Wave network: ZWaveAlarmSensorValueEvent
2022-01-24 09:31:54.058 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_SENSOR_ALARM, value=255
2022-01-24 09:31:54.059 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Commands processed 1.
2022-01-24 09:31:54.060 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@120784e.
2022-01-24 09:31:54.061 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2022-01-24 09:31:54.062 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2022-01-24 09:31:54.063 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2022-01-24 09:31:54.064 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.

I can confirm I’m experiencing the same issue with with a variety of Aeotec and Abus sensors, with OH 3.3.0.M2.