So I am trying to get my FS20 switch running on OPENHAB2.2 on PI3b and now with an original Busware CUL. I would say - I am close - but not yet successful! Using the screen commando on ttyACM0 I am getting something like FCD9B13123F FCD9B131232 and the related switch switchs using the remot con…

Yeah Works!!! Thanks a lot, So at the end it was just the wrong logic I used in sitemap and items!! New Questions from a Beginner: Can I only use the FS20 items in BasicUI or also in e.g. HabPanel or PaperUI? Can I combine Z-Wave Movement detector to switch the FS20 Switches maybe in HabPanel…

[image] boris03: Switch item=PowerSocket Switch item=Test

yes, in all graphical interfaces yes not in HABPanel, but yes, in a rules file

Thanks a lot, (Your answers are not really long:slight_smile: So in the example “Item Presence_Mobile_John” could be a Zwave item and “Wallplug_FF_LR_TV” could be FS20 switch? Then these names used are my defined items doesn´t matter if FS20 or ZWAVE? Can I flexible use such rules in all UIs…

yes yes, rules alter your items states, so you are using updated/switched item states in your UI’s [image] boris03: Your answers are not really long Time is short and costs money :rofl:

So I added now my Z-WAVE stick AOTEC GEN5, it allocates the ttyACM0, and the busware CUL is getting ttyACM1. OK, no problem changed it in my FS20.cfg, but … FS20 not working anymore how often I restart - nothing! BTW: I see that Z-WAVE stick in PaperUI config shows me serial port ttyACM0 twice?? …

[image] Raspberry Pi - Make serial USB ports persistent via symlinks Tutorials & Examples Usually, USB sticks attached to Raspberry Pi will get assigned ports in an increasing manner such as /dev/ttyACM0, /dev/ttyACM1, etc. This may become a problem whenever yo…

FS20 - I am close but not yet there - please help

Setup, Configuration and Use Installation

sihui (SiHui) February 15, 2018, 4:34pm 8