Having trouble by getting enOcean bindings running

[jackmule (Jackson)]

Hey, I’ve finally found a few hours to work on.

@raphael

Did you managed to add your enocen device manually? And how did you get the enocean ID?

I have fixed the problem with error message and duplicate device addresses after making a factory reset and clear sensor list of all actors yesterday. It was a lot of work to re-teach all the switches.

BaseId: FF940300
FF940301
FF940302
FF940303
FF940304
FF940305
FF940306
FF940307
FF940308

@fruggy83

Now go to your FSB, there you first have to switch to the correct channel which you want to teach in (1 or 2), then switch to lrn

Thing config example:

Items overview:

Control view Paper UI:

If I set the upper switch on the FSB14 to 60 (central switch) and LRN, then unfortunately nothing happens when the switch is switched in OpenHab.

The LEDs of FSB14 continue to flash. Is it not possible to include a central switch in the teach-in mode?

Thank you very much and have a nice Sunday!