Hello everyone.I have a problem.I have a stick сс2538.I installed zigbee2mqtt via sudo openhabian-config.broker and binding are also installed.I don’t understand what to do next.how to set up a stick?what commands should I prescribe?how will he see that the stick is working?

Your Zigbee coordinator is not recommended by Zigbee2MQTT (it may work nevertheless …). Please read the Zigbee2MQTT documentation. Make sure that you can control your Zigbee devices from within Zigbee2MQTT. The basic setup: Zigbee device ↔ Zigbee coordinator ↔ Zigbee2MQTT ↔ MQTT Broker ↔ MQTT Bi…

broker and binding are also installed!!!and online!!!after installing zigbee2mqtt, what should I do? what should I write in putty to set up the stick?

Have you setup your configuration.yaml? openHABian | Zigbee2MQTT Zigbee to MQTT bridge, get rid of your proprietary Zigbee bridges What do the logs say?

please tell me.What am I doing wrong?I have installed broker and mqtt binding.this is online.then I installed zigbee2mqtt according to the instructions Home | Zigbee2MQTT Zigbee to MQTT bridge, get rid of your proprietary Zigbee bridges openHABian | Zigbee2M…

Can you use the code fencing for your configuration file. [image] How to use code fences Tutorials & Examples We all have to type this content over and over and over. Here is a posting we can all point to when the topic comes up. Why use code fences? Because …

If youhave another computer on your LAN, install MQTT Explorer ( http://mqtt-explorer.com/ ) and enter the broker config details and connect. This will show EVERY mqtt message sent through the broker in a very easy to read tree structure, If you have an android phone, install MQTT Client ( https://pl…

Also have you tried typing “sudo systemctl status zigbee2mqtt”? Or even “sudo journalctl -u zigbee2mqtt.service -f”?

[quote=“Tougharms, post:8, topic:143532”] here’s what it says when I wrote the command “sudo systemctl status zigbee2mqtt” ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2023-01-26 1…

Look.When i write command: ls -l /dev/serial/by-id I got the answer that the stick is connected to raspberry lrwxrwxrwx 1 root root 13 Jan 19 12:14 usb-Texas_Instruments_CC2538_USB_CDC-if00 → ../../ttyACM1 the stick is connected,the zigbee2mqtt service is running where can I see my zigbe device…

Looks ok. Set up the frontend webUI. Type “cd /opt/zigbee2mqtt/data” Edit configuration.yaml - “nano configuration.yaml” After experimental: attribute insert frontend: port: 8090 host: localhost NOTE: there are 2 spaces before “port” and “host” Save and reboot Use a web broweser on yo…

Help me please with zigbee2mqtt

Setup, Configuration and Use Installation

clinophobic (clinophobic) January 22, 2023, 11:47am 6

Can you use the code fencing for your configuration file.

Have you started zigbee2mqtt???

I would also suggest adding a frontend to your configuration that and setting the port to one that does not interfere with openhab. That way you can view the logs and settings in your browser