Help needed recovering zigbee network / trying to understand what happened

Hi,

About a week ago I noticed one of my Philips Hue remotes stopped working. No big deal, it was an empty battery. I replaced the battery and it worked again as expected.
One day later, the same issue. I used a battery from the battery drawer so I wasn’t sure about its state. I replaced the battery again but this time I used a new one fresh out of the blister.

One day later, the same issue. Ok this might be a broken remote? But then I noticed all my battery powered zigbee devices where running low. I replaced all batteries (new, confirmed with a multimeter and from different packages) but again the next day the battery level dropped by 20%

I looked at the “When things don’t appear to be working as expected” section in the documentation and changed loglevels to DEBUG. I saw a lot of repeating traffic:

Summary

2026-10-28 10:23:24.189 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=C243]
2026-10-28 10:23:24.210 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=C243]
2026-10-28 10:23:24.550 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=04DF]
2026-10-28 10:23:24.571 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=04DF]
2026-10-28 10:23:24.806 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=05C4]
2026-10-28 10:23:24.807 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=05C4]
2026-10-28 10:23:25.092 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspMessageSentHandler [networkId=0, type=EMBER_OUTGOING_DIRECT, indexOrDestination=05C4, apsFrame=EmberApsFrame [profileId=0000, clusterId=0005, sourceEndpoint=0, destinationEndpoint=0, options=[EMBER_APS_OPTION_ENABLE_ROUTE_DISCOVERY, EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY, EMBER_APS_OPTION_RETRY], groupId=0, sequence=77], messageTag=68, status=EMBER_DELIVERY_FAILED, messageContents=]
2026-10-28 10:23:25.093 [DEBUG] [tsystems.zigbee.ZigBeeNetworkManager] - RX STA: msgTag=68 state=RX_NAK
2026-10-28 10:23:25.094 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D00028D4315: transactionComplete, state=FAILED, outstanding=0
2026-10-28 10:23:25.094 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D00028D4315: transactionComplete exceeded max retries 2
2026-10-28 10:23:25.095 [DEBUG] [zigbee.transaction.ZigBeeTransaction] - Transaction cancelled: ZigBeeTransaction [ieeeAddress=00158D00028D4315 queueTime=9597, state=CANCELLED, sendCnt=2, command=ActiveEndpointsRequest [0000/0 → 05C4/0, cluster=0005, TID=68, nwkAddrOfInterest=05C4]]
2026-10-28 10:23:25.095 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D00028D4315: transactionComplete but not outstanding, state=CANCELLED, outstanding=0
2026-10-28 10:23:25.095 [DEBUG] [zigbee.transaction.ZigBeeTransaction] - Transaction state changed: nwk=05C4, TID=68, event=RX_NAK, state=CANCELLED
2026-10-28 10:23:25.095 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D00028D4315: Node SVC Discovery: ActiveEndpointsResponse returned CommandResult [TIMEOUT]
2026-10-28 10:23:25.096 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D00028D4315: Node SVC Discovery: request ACTIVE_ENDPOINTS failed. Retry 1, wait 2334ms before retry.
2026-10-28 10:23:26.059 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=E915]
2026-10-28 10:23:26.079 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=E915]
2026-10-28 10:23:26.146 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=04DF]
2026-10-28 10:23:26.166 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=04DF]
2026-10-28 10:23:26.331 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=D99D]
2026-10-28 10:23:26.352 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=D99D]
2026-10-28 10:23:26.398 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=05C4]
2026-10-28 10:23:26.418 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=05C4]
2026-10-28 10:23:27.431 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D00028D4315: Node SVC Discovery: running ACTIVE_ENDPOINTS
2026-10-28 10:23:27.431 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D00028D4315: Added transaction to queue, len=1, transaction=ZigBeeTransaction [ieeeAddress=00158D00028D4315 queueTime=0, state=WAITING, sendCnt=0, command=ActiveEndpointsRequest [0000/0 → 05C4/0, cluster=0005, TID=–, nwkAddrOfInterest=05C4]]
2026-10-28 10:23:27.431 [DEBUG] [tsystems.zigbee.ZigBeeNetworkManager] - TX CMD: ActiveEndpointsRequest [0000/0 → 05C4/0, cluster=0005, TID=6B, nwkAddrOfInterest=05C4]
2026-10-28 10:23:27.432 [DEBUG] [tsystems.zigbee.ZigBeeNetworkManager] - TX APS: ZigBeeApsFrame [sourceAddress=0000/0, destinationAddress=05C4/0, profile=0000, cluster=0005, addressMode=DEVICE, radius=8, apsSecurity=false, ackRequest=true, apsCounter=85, rssi=–, lqi=–, payload=6B C4 05]
2026-10-28 10:23:27.441 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspSendUnicastResponse [networkId=0, status=EMBER_SUCCESS, sequence=7A]
2026-10-28 10:23:27.652 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=E915]
2026-10-28 10:23:27.673 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=E915]
2026-10-28 10:23:27.742 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=04DF]
2026-10-28 10:23:27.762 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=04DF]
2026-10-28 10:23:27.928 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=D99D]
2026-10-28 10:23:27.948 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=D99D]
2026-10-28 10:23:27.950 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspMessageSentHandler [networkId=0, type=EMBER_OUTGOING_DIRECT, indexOrDestination=E915, apsFrame=EmberApsFrame [profileId=0000, clusterId=0005, sourceEndpoint=0, destinationEndpoint=0, options=[EMBER_APS_OPTION_ENABLE_ROUTE_DISCOVERY, EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY, EMBER_APS_OPTION_RETRY], groupId=0, sequence=78], messageTag=69, status=EMBER_DELIVERY_FAILED, messageContents=]
2026-10-28 10:23:27.950 [DEBUG] [tsystems.zigbee.ZigBeeNetworkManager] - RX STA: msgTag=69 state=RX_NAK
2026-10-28 10:23:27.951 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D0002A2180F: transactionComplete, state=FAILED, outstanding=0
2026-10-28 10:23:27.951 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D0002A2180F: transactionComplete exceeded max retries 2
2026-10-28 10:23:27.951 [DEBUG] [zigbee.transaction.ZigBeeTransaction] - Transaction cancelled: ZigBeeTransaction [ieeeAddress=00158D0002A2180F queueTime=9605, state=CANCELLED, sendCnt=2, command=ActiveEndpointsRequest [0000/0 → E915/0, cluster=0005, TID=69, nwkAddrOfInterest=E915]]
2026-10-28 10:23:27.952 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D0002A2180F: transactionComplete but not outstanding, state=CANCELLED, outstanding=0
2026-10-28 10:23:27.952 [DEBUG] [zigbee.transaction.ZigBeeTransaction] - Transaction state changed: nwk=E915, TID=69, event=RX_NAK, state=CANCELLED
2026-10-28 10:23:27.952 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D0002A2180F: Node SVC Discovery: ActiveEndpointsResponse returned CommandResult [TIMEOUT]
2026-10-28 10:23:27.953 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D0002A2180F: Node SVC Discovery: request ACTIVE_ENDPOINTS failed. Retry 2, wait 4686ms before retry.
2026-10-28 10:23:27.999 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=05C4]
2026-10-28 10:23:28.020 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=05C4]
2026-10-28 10:23:28.214 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspMessageSentHandler [networkId=0, type=EMBER_OUTGOING_DIRECT, indexOrDestination=D99D, apsFrame=EmberApsFrame [profileId=0000, clusterId=0005, sourceEndpoint=0, destinationEndpoint=0, options=[EMBER_APS_OPTION_ENABLE_ROUTE_DISCOVERY, EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY, EMBER_APS_OPTION_RETRY], groupId=0, sequence=79], messageTag=6A, status=EMBER_DELIVERY_FAILED, messageContents=]
2026-10-28 10:23:28.214 [DEBUG] [tsystems.zigbee.ZigBeeNetworkManager] - RX STA: msgTag=6A state=RX_NAK
2026-10-28 10:23:28.214 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D00025EDDA1: transactionComplete, state=FAILED, outstanding=0
2026-10-28 10:23:28.214 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D00025EDDA1: transactionComplete exceeded max retries 2
2026-10-28 10:23:28.215 [DEBUG] [zigbee.transaction.ZigBeeTransaction] - Transaction cancelled: ZigBeeTransaction [ieeeAddress=00158D00025EDDA1 queueTime=9595, state=CANCELLED, sendCnt=2, command=ActiveEndpointsRequest [0000/0 → D99D/0, cluster=0005, TID=6A, nwkAddrOfInterest=D99D]]
2026-10-28 10:23:28.215 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D00025EDDA1: transactionComplete but not outstanding, state=CANCELLED, outstanding=0
2026-10-28 10:23:28.215 [DEBUG] [zigbee.transaction.ZigBeeTransaction] - Transaction state changed: nwk=D99D, TID=6A, event=RX_NAK, state=CANCELLED
2026-10-28 10:23:28.215 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D00025EDDA1: Node SVC Discovery: ActiveEndpointsResponse returned CommandResult [TIMEOUT]
2026-10-28 10:23:28.215 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D00025EDDA1: Node SVC Discovery: request ACTIVE_ENDPOINTS failed. Retry 4, wait 4390ms before retry.
2026-10-28 10:23:29.248 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=E915]
2026-10-28 10:23:29.268 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=E915]
2026-10-28 10:23:29.521 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=D99D]
2026-10-28 10:23:29.542 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=D99D]
2026-10-28 10:23:29.602 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=05C4]
2026-10-28 10:23:29.623 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=05C4]
2026-10-28 10:23:30.855 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=E915]
2026-10-28 10:23:30.876 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=E915]
2026-10-28 10:23:31.128 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=D99D]
2026-10-28 10:23:31.129 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=D99D]
2026-10-28 10:23:31.197 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingNetworkStatusHandler [networkId=0, errorCode=6, target=05C4]
2026-10-28 10:23:31.217 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspIncomingRouteErrorHandler [networkId=0, status=EMBER_MAC_INDIRECT_TIMEOUT, target=05C4]
2026-10-28 10:23:31.591 [DEBUG] [iscovery.ZigBeeNodeServiceDiscoverer] - 00158D0006D42C2B: Node SVC Discovery: running ACTIVE_ENDPOINTS
2026-10-28 10:23:31.591 [DEBUG] [e.transaction.ZigBeeTransactionQueue] - 00158D0006D42C2B: Added transaction to queue, len=1, transaction=ZigBeeTransaction [ieeeAddress=00158D0006D42C2B queueTime=0, state=WAITING, sendCnt=0, command=ActiveEndpointsRequest [0000/0 → C243/0, cluster=0005, TID=–, nwkAddrOfInterest=C243]]
2026-10-28 10:23:31.592 [DEBUG] [tsystems.zigbee.ZigBeeNetworkManager] - TX CMD: ActiveEndpointsRequest [0000/0 → C243/0, cluster=0005, TID=6C, nwkAddrOfInterest=C243]
2026-10-28 10:23:31.593 [DEBUG] [tsystems.zigbee.ZigBeeNetworkManager] - TX APS: ZigBeeApsFrame [sourceAddress=0000/0, destinationAddress=C243/0, profile=0000, cluster=0005, addressMode=DEVICE, radius=8, apsSecurity=false, ackRequest=true, apsCounter=86, rssi=–, lqi=–, payload=6C 43 C2]
2026-10-28 10:23:31.602 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspSendUnicastResponse [networkId=0, status=EMBER_SUCCESS, sequence=7B]
2026-10-28 10:23:32.229 [DEBUG] [zigbee.dongle.ember.ZigBeeDongleEzsp] - RX EZSP: EzspMessageSentHandler [networkId=0, type=EMBER_OUTGOING_DIRECT, indexOrDestination=05C4, apsFrame=EmberApsFrame [profileId=0000, clusterId=0005, sourceEndpoint=0, destinationEndpoint=0, options=[EMBER_APS_OPTION_ENABLE_ROUTE_DISCOVERY, EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY, EMBER_APS_OPTION_RETRY], groupId=0, sequence=7A], messageTag=6B, status=EMBER_DELIVERY_FAILED, messageContents=]

I tried:

  • restarting OpenHAB
  • restarting the VM
  • clearing cache and restarting
  • reconnecting zigbee dongle
  • replacing batteries
  • resetting some remotes as a test

After each attempt I waited about an hour for the network to settle down. Unfortunately it became worse. A lot of sensors stopped responding/updating. So as a last attempt I switched the “Reinitialize Controller” switch on. which apparently was a mistake. All sensors were “gone”. I managed to restore most Things by restoring all xml files in /var/lib/openhab/zigbee//

Anyway, now I’m back at the point that most sensors and remotes are online but unresponsive.

My setup:

I’m running openhab 5.3.0.M3 on a Proxmox VM on a Dell mini PC (x86)

Bindings:

Summary

openhab> bundle:list
START LEVEL 100 , List Threshold: 50
ID │ State │ Lvl │ Version │ Name
────┼──────────┼─────┼─────────────────────────┼───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
30 │ Active │ 80 │ 2.22.0 │ Jackson-annotations
31 │ Active │ 80 │ 2.22.2 │ Jackson-core
32 │ Active │ 80 │ 2.22.2 │ jackson-databind
33 │ Active │ 80 │ 2.22.2 │ Jackson-dataformat-XML
34 │ Active │ 80 │ 2.22.2 │ Jackson-dataformat-YAML
35 │ Active │ 80 │ 2.22.2 │ Jackson datatype: JSR310
36 │ Active │ 80 │ 6.6.2 │ Woodstox
37 │ Active │ 80 │ 2.48.0 │ error-prone annotations
38 │ Active │ 80 │ 2.14.0 │ Gson
39 │ Active │ 80 │ 33.6.0.jre │ Guava: Google Core Libraries for Java
40 │ Active │ 80 │ 1.0.3 │ Guava InternalFutureFailureAccess and InternalFutures
41 │ Active │ 80 │ 7.0.0 │ guice
42 │ Active │ 80 │ 5.18.1 │ jna
44 │ Active │ 80 │ 1.9.3 │ Jollyday Core
45 │ Active │ 80 │ 1.9.3 │ Jollyday with Jackson
46 │ Active │ 80 │ 4.8.184 │ ClassGraph
47 │ Active │ 80 │ 0.19.1 │ Directory-Watcher
48 │ Active │ 80 │ 2.2.54 │ swagger-annotations
49 │ Active │ 80 │ 2.2.54 │ swagger-core
50 │ Active │ 80 │ 2.2.54 │ swagger-integration
51 │ Active │ 80 │ 2.2.54 │ swagger-jaxrs2
52 │ Active │ 80 │ 2.2.54 │ swagger-models
53 │ Active │ 80 │ 2.1.1 │ Jakarta Annotations API
54 │ Active │ 80 │ 2.0.1 │ Jakarta Dependency Injection
56 │ Active │ 80 │ 2.0.2 │ Jakarta Bean Validation API
58 │ Active │ 80 │ 2.3.3 │ Jakarta XML Web Services API
59 │ Active │ 80 │ 3.6.4 │ JmDNS
60 │ Active │ 80 │ 2.2.0 │ Units of Measurement API
62 │ Active │ 80 │ 3.2.0.v201101311130 │ ANTLR Runtime
63 │ Active │ 80 │ 1.0.0.v201105210816 │ Aopalliance Plug-in
64 │ Active │ 80 │ 1.2.2 │ org.apache.aries.component-dsl.component-dsl
65 │ Active │ 80 │ 1.0.4 │ Apache Aries JAX-RS Specification API
66 │ Active │ 80 │ 2.0.2 │ Apache Aries JAX-RS Whiteboard
68 │ Active │ 80 │ 3.20.0 │ Apache Commons Lang
69 │ Active │ 80 │ 3.6.10 │ Apache CXF Core
70 │ Active │ 80 │ 3.6.10 │ Apache CXF Runtime JAX-RS Frontend
71 │ Active │ 80 │ 3.6.10 │ Apache CXF JAX-RS Client
72 │ Active │ 80 │ 3.6.10 │ Apache CXF JAX-RS Server-Side Events Support
73 │ Active │ 80 │ 3.6.10 │ Apache CXF Runtime Security functionality
74 │ Active │ 80 │ 3.6.10 │ Apache CXF Runtime HTTP Transport
81 │ Active │ 80 │ 4.4.11 │ Apache Karaf :: OSGi Services :: Event
97 │ Active │ 80 │ 2.3.1 │ XmlSchema Core
98 │ Active │ 80 │ 1.1.2 │ apiguardian-api
99 │ Active │ 80 │ 0.9.6 │ jose4j
100 │ Active │ 80 │ 2.30.0.v20231210-0956 │ EMF Common
101 │ Active │ 80 │ 2.36.0.v20240203-0859 │ EMF Ecore
102 │ Active │ 80 │ 2.16.0.v20231208-1346 │ EMF Change Model
103 │ Active │ 80 │ 2.37.0.v20231208-1346 │ EMF XML/XMI Persistence
104 │ Active │ 80 │ 3.20.300.v20251111-0312 │ Common Eclipse Runtime
138 │ Active │ 80 │ 1.0.0.v20260209-1721 │ org.eclipse.lsp4j
139 │ Active │ 80 │ 1.0.0.v20260209-1721 │ org.eclipse.lsp4j.jsonrpc
140 │ Resolved │ 80 │ 2.43.0.v20260525-1205 │ Xtend Runtime Library
141 │ Resolved │ 80 │ 2.43.0.v20260525-1205 │ Xtend Macro Interfaces
142 │ Active │ 80 │ 2.43.0.v20260525-1205 │ Xtext
143 │ Active │ 80 │ 2.43.0.v20260525-1205 │ Xtext Common Types
144 │ Active │ 80 │ 2.43.0.v20260525-1205 │ Xtext IDE Core
145 │ Active │ 80 │ 2.43.0.v20260525-1205 │ Xtext Utility
146 │ Active │ 80 │ 2.43.0.v20260525-1205 │ Xbase Model
147 │ Active │ 80 │ 2.43.0.v20260525-1205 │ Xbase Generic IDE Services
148 │ Active │ 80 │ 2.43.0.v20260525-1205 │ Xbase Runtime Library
156 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Core
157 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Add-on XML
158 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Marketplace Add-on Services
159 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Community Marketplace Add-on Service :: Karaf
160 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Audio
161 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: JAAS Authentication
162 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: OAuth2Client
163 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Automation
164 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Automation Media Modules
165 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Automation Script Modules
166 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Automation Script ProviderSupport
167 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Automation Script RuleSupport
168 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Automation REST API
169 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration Core
170 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration Discovery
171 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Add-on Suggestion Service
172 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Process-based Suggested Add-on Finder
173 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration mDNS Discovery
174 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration Dispatcher
175 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Ephemeris
176 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: ID
177 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Console
178 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Console for OSGi runtime Karaf
179 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: HTTP Interface
180 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: HTTP Interface Authentication
182 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Monitor
183 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Network I/O
184 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: REST Interface
185 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Audio REST Interface
186 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Authentication Support for the REST Interface
187 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: REST Interface :: Core
188 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: REST mDNS Announcer
189 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Sitemap REST Interface
190 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: SSE Interface
191 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: REST Interface :: Swagger 1
192 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Transformation REST Interface
193 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: UI REST Interface
194 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Voice REST Interface
195 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: mDNS Service
196 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: WebSocket
197 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Audio PCM Websocket Interface
198 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Karaf Integration
199 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Core
200 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Items
201 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Item IDE
202 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Items Runtime
203 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Language Server
204 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Persistence
205 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Persistence IDE
206 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Persistence Runtime
207 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Rules
208 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Rule IDE
209 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Rules Runtime
210 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Script
211 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Script IDE
212 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Script Runtime
213 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Sitemap
214 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Sitemap IDE
215 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Sitemap Runtime
216 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Thing
217 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Thing IDE
218 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model Thing Runtime
219 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Model YAML
220 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Persistence
221 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Semantics
222 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Sitemap
223 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: JSON Storage
224 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Thing
225 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Transformation Service
226 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: UI
227 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: UI Icon Support
228 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Voice
229 │ Active │ 80 │ 5.3.0.M3 │ openHAB UI :: Bundles :: Main UI
230 │ Active │ 80 │ 5.3.0.M3 │ openHAB UI :: Bundles :: Icon Set :: Classic
240 │ Active │ 80 │ 1.5.1.202212101352 │ org.osgi:org.osgi.service.component.annotations
241 │ Active │ 80 │ 1.0.1.202109301733 │ org.osgi:org.osgi.service.jaxrs
242 │ Active │ 80 │ 1.8.0 │ ThreeTen-Extra
243 │ Active │ 80 │ 2.5.0 │ SnakeYAML
244 │ Active │ 80 │ 2.2.3 │ SI Quantity
245 │ Active │ 80 │ 2.2.3 │ SI Units
246 │ Active │ 80 │ 4.3.0 │ Stax2 API
247 │ Active │ 80 │ 2.2.3 │ Units of Measurement Reference Implementation
248 │ Active │ 80 │ 2.2.0 │ Units of Measurement Common Library for Java
249 │ Active │ 80 │ 1.4.21 │ XStream Core
250 │ Active │ 80 │ 2.42 │ Dagger
251 │ Active │ 80 │ 1.4.0 │ HiveMQ MQTT Client
252 │ Active │ 80 │ 5.18.1 │ jna-platform
253 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee
254 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee.console
255 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee.console.ember
256 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee.console.telegesis
257 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee.dongle.cc2531
258 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee.dongle.ember
259 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee.dongle.telegesis
260 │ Active │ 80 │ 1.4.16.1 │ com.zsmartsystems.zigbee.dongle.xbee
261 │ Active │ 80 │ 4.1.137.Final │ Netty/Buffer
262 │ Active │ 80 │ 4.1.137.Final │ Netty/Codec
263 │ Active │ 80 │ 4.1.137.Final │ Netty/Codec/HTTP
264 │ Active │ 80 │ 4.1.137.Final │ Netty/Codec/Socks
265 │ Active │ 80 │ 4.1.137.Final │ Netty/Common
266 │ Active │ 80 │ 4.1.137.Final │ Netty/Handler
267 │ Active │ 80 │ 4.1.137.Final │ Netty/Handler/Proxy
268 │ Active │ 80 │ 4.1.137.Final │ Netty/Resolver
269 │ Active │ 80 │ 2.0.81.Final │ Netty/TomcatNative [OpenSSL - Classes]
270 │ Active │ 80 │ 4.1.137.Final │ Netty/Transport
271 │ Active │ 80 │ 4.1.137.Final │ Netty/Transport/Classes/Epoll
272 │ Active │ 80 │ 4.1.137.Final │ Netty/Transport/Native/Unix/Common
273 │ Active │ 80 │ 2.2.21 │ rxjava
274 │ Active │ 80 │ 1.0.1 │ IO.Socket Engine Client
275 │ Active │ 80 │ 1.0.1 │ IO.Socket Socket Client
276 │ Active │ 80 │ 1.0.5 │ Jakarta Dependency Injection
277 │ Active │ 80 │ 20251224.0.0 │ JSON in Java
278 │ Active │ 80 │ 5.2.1.OH1 │ nrjavaserial
279 │ Active │ 80 │ 2.22.0 │ Apache Commons IO
280 │ Active │ 80 │ 3.13.0 │ Apache Commons Net
281 │ Active │ 80 │ 3.8.1.1 │ Apache ServiceMix :: Bundles :: okhttp
282 │ Active │ 80 │ 1.13.0.1 │ Apache ServiceMix :: Bundles :: okio
283 │ Active │ 78 │ 25.0.1 │ GraalVM :: JS :: Language
284 │ Active │ 80 │ 25.0.1 │ GraalVM :: JS :: Script Engine
285 │ Active │ 80 │ 25.0.1 │ GraalVM :: Polyglot :: Polyglot
286 │ Active │ 78 │ 25.0.1 │ GraalVM :: Regex :: TRegex
287 │ Active │ 80 │ 25.0.1 │ GraalVM :: SDK :: Collections
288 │ Active │ 80 │ 25.0.1 │ GraalVM :: SDK :: Native Image
289 │ Active │ 80 │ 25.0.1 │ GraalVM :: SDK :: Word
290 │ Active │ 80 │ 25.0.1 │ GraalVM :: Truffle :: ICU4J
291 │ Active │ 80 │ 25.0.1 │ GraalVM :: Truffle :: JSON
292 │ Active │ 80 │ 25.0.1 │ GraalVM :: Truffle :: XZ
293 │ Active │ 78 │ 25.0.1 │ GraalVM :: Tools :: Chrome Inspector
294 │ Active │ 78 │ 25.0.1 │ GraalVM :: Tools :: Profiler
295 │ Active │ 79 │ 25.0.1 │ GraalVM :: Truffle :: API
296 │ Active │ 80 │ 25.0.1 │ GraalVM :: Truffle :: Compiler
297 │ Active │ 80 │ 25.0.1 │ GraalVM :: Truffle :: Runtime
298 │ Active │ 80 │ 4.0.7 │ Java Concurrency Tools Core Library
299 │ Active │ 80 │ 1.23.2 │ jsoup Java HTML Parser
300 │ Active │ 80 │ 3.0.5 │ jUPnP Core Library
301 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Automation :: JavaScript Scripting
302 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Automation :: JavaScript Scripting (Nashorn)
303 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Astro Binding
304 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: DSMR Binding
305 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Enphase Binding
306 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: HEOS Binding
307 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Home Connect Direct Binding
308 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: meteostick Binding
309 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: MQTT Broker Binding
310 │ Active │ 81 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: MQTT Awtrix 3
311 │ Active │ 81 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: MQTT EspMilightHub
312 │ Active │ 81 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: MQTT FPP
313 │ Active │ 81 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: MQTT Ruuvi Gateway
314 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Network Binding
315 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Rfxcom Binding
316 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: SNMP Binding
317 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Velux Binding
318 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: WLed Binding
319 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Binding
320 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee CC2531 Bridge
321 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Console
322 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Console Ember
323 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Console Telegesis
324 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Ember Bridge
325 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Firmware Provider
326 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Serial Driver
327 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee SLZB06 Bridge
328 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee Telegesis Bridge
329 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZigBee XBee Bridge
330 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: ZWave Binding
331 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: IP-based Suggested Add-on Finder
332 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: mDNS Suggested Add-on Finder
333 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: SDDP Suggested Add-on Finder
334 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: uPnP Suggested Add-on Finder
335 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: USB Suggested Add-on Finder
336 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration SDDP Discovery
337 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration UPnP Discovery
338 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration USB-Serial Discovery
339 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration USB-Serial Discovery for Linux using sysfs scanning
340 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration USB-Serial Discovery using ser2net mDNS scanning
341 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration USB-Serial Discovery for Windows
342 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Configuration Serial
343 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: MQTT Transport
344 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Serial Transport
345 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Serial Transport for RXTX
346 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: Serial Transport for RFC2217
347 │ Active │ 80 │ 5.3.0.M3 │ openHAB Core :: Bundles :: UPnP Transport
348 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: IO :: openHAB Cloud Connector
349 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Persistence Service :: InfluxDB
350 │ Active │ 80 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Persistence Service :: MapDB
351 │ Active │ 75 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Transformation Service :: JSonPath
352 │ Active │ 75 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Transformation Service :: Map
353 │ Active │ 75 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Transformation Service :: RegEx
354 │ Active │ 75 │ 5.3.0.M3 │ openHAB Add-ons :: Bundles :: Transformation Service :: Scale
355 │ Active │ 80 │ 5.3.0.M3 │ openHAB UI :: Bundles :: Basic UI
356 │ Active │ 80 │ 1.0.4 │ reactive-streams-jvm

Zigbee log: (last 1 mb)

zigbee1m.log (1 MB)

I used ZigBee Log Viewer but didnt see anything obvious.

Any suggestions on what to do next?

[edit]

I use the “native” openhab zigbee binding. I have a separate container running zigbee2mqtt with a second stick for two devices not supported by the binding.

The sticks are Sonoff ZBDongle-E Zigbee 3.0 with firmware 7.4.4

Hi @tsmit !

I have a small Zigbee network, and I’d like to share some of my experiences—they might help with your troubleshooting.

    • I’ve encountered situations where battery-powered devices drained their batteries in just a few days; the cause was that they were constantly attempting to pair or communicate with the coordinator. So, it could be a pairing issue or a communication failure.
    • I use Zigbee2MQTT with an Ember-based coordinator (a Sonoff USB dongle).
    • Zigbee networks can suffer from interference from your own or your neighbors’ Wi-Fi networks. Some channels are more prone to interference than others. Check which channels your Wi-Fi is using. Switching to higher Zigbee channels—like 20 or 25—might help reduce interference, especially if your Wi-Fi is set to channels 6 or 11.
    • In Zigbee2MQTT, if you change the Zigbee network channel, some battery-powered devices may need to be re-paired. This happens in my own network.
    • I have more mains-powered devices (like those plugged into outlets) than battery-powered ones, which gives my network better “balance” within the mesh.
    • The positioning of the Sonoff USB dongle’s antenna makes a difference in my network. Check how it’s positioned, and see if you can move the coordinator closer to the center of your Zigbee device cluster.

I hope something on this list proves helpful to you!

Hi!

Thanks for the suggestions!

  1. This seems to be my issue as well. It came out of nowhere :frowning:

  2. This network uses the “native” Zigbee binding (I’ve updated my first post)

  3. Also no changes here. My neighbors are too far away to cause any trouble (I think) I have a couple of Aqara devices and I remember they don’t like other channels than 11?

  4. No zigbee2mqtt in this case. But I did click reinitialize zigbee network maybe this broke more than I wanted

  5. All my Zigbee devices are battery powered. For this reason I have two repeaters/routers installed (yeas ago). One is an Ikea tradfri and the other is a Sonoff dongle with koens router firmware.

  6. Also nothing changed. I have mounted them quite high with a USB extension lead to minimize interference from the PC

If you set the reinitialize switch on your controller the only way to get everything back to working correctly is NOT replace the xml file but to actually repair each device again otherwise you will have random intermittent behavior that will drive you crazy. Most likely the first issue was a low battery in a device and that had created a noise(chatter) on your ZigBee network or as also mentioned a new neighbor’s wireless network. Or a powered device that saw a brown out and is in a bad state. I have seen all of the above in the past. start by deleting the devices and trigger repairing(rediscovery) take note the name you used and if you did not change the uid when you first installed, they will discover come back and reattach to the items you had linked before if you did change uid then before you delete you need to copy it and replace it on rediscovery again.
TLDR: version delete and repair(rediscover) all zigbee devices. (things).

Before deleting everything, I would test one device close to the coordinator to separate a mesh problem from a general binding problem. With only two routers for an all-battery network, a weak mesh is also worth checking, so I would bring one router nearer to the failing devices and let the network settle before judging the result. If you do rediscover devices, do them one at a time and keep a note of each device name, so a device that comes back under a new identity does not silently break your items and rules.

Thanks for the replies and suggestions!

In the mean time I managed to get the network up and running again by shutting down OH, replacing the xml files again and restarting OH again. This time all sensors came back online and everything is working as before.

Next time the network fails I will keep in mind that any device with a low battery can create noise on the network (this might explain the repeating rejoin packages I saw earlier, caused by a brownout of the sensor during the join?) And if replacing batteries doesn’t work I will recreate the network by starting all over. I really didn’t want to do that; as of now I have 1 controller, 2 repeaters and 45 battery operated sensors.

I will also take a look at the “backbone” of the network, maybe I need to add more repeaters, any suggestions for a specific brand or model? Or just buy any mains powered device an use that as a repeater? (like zwave)