Help setting up broadlink and openhab

Add-ons Bindings
1

Hey Community,

I apologize for this simple request, but i’m brand new to this and I’m just stuck. I got open hab to recognize the broadlink but I cant seem to send commands.

This is whats in my broadlink map:
AirCon_POWER_OFF=2600bc01713a0d0f0e2b0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d100d2c0d0f0d0f0e0f0d0f0e0f0d0f0e0f0d2c0d2c0d2c0d0f0d100d2b0e0f0d0f0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d100d0f0d100d0f0d0f0e0f0d0f0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d100d2c0d2b0e0f0d0f0e0f0d0f0e0f0d0009ca713a0d100d2c0d0f0d0f0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d2c0d0f0d100d0f0d100d0f0d0f0e0f0d2c0d2c0d2c0d0f0d100d2c0d0f0d100d0f0d0f0e0f0d0f0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d2c0d2c0d2c0d0f0e0f0d0f0e2b0d100d2c0d0f0d2c0d100d0f0d100d0f0d0f0e0f0d0f0e0f0d0f0e2b0d2c0d100d0f0d100d2c0d2b0e2b0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d100d0f0d100d0f0d0f0e0f0d0f0e0f0d2c0d2c0d2c0d0f0d100d0f0d100d0f0d100d0f0d0f0e0f0d2c0d2c0d2c0d0f0d100d0f0d100d0f0d100d0f0d0f0e0f0d0f0e0f0d0f0e0f0d0f0d100d0f0d2c0d100d0f0d100d0f0d100d0f0d2c0d0f0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d100d0f0d100d0f0d0f0e0f0d0f0e0f0d2c0d0f0d100d2c0d2c0d000d05000000000000000000000000

AirCon_POWER_ON=2600bc01713a0d0f0d2c0d100d0f0c110c100c110c100c110c100d0f0d100d0f0e2b0e0f0d0f0d100c100d100c100d100c2d0d2c0d2b0e0f0d0f0d2c0e0f0d0f0d100d0f0d100d0f0d110c0f0d100d0f0d100d0f0d0f0e0f0d100d0f0c100d100d0f0d100d0f0d100d0f0d100c100d100d0f0d100c100d0f0e2b0e2b0e0f0d0f0d100d0f0d100d0009ca713a0d100d2c0d0f0d100d0f0d0f0e0f0d0f0e0f0d0f0e0f0d0f0d100d2c0d0f0d100d0f0d100d0f0d100d0f0d2c0d2c0d2c0d0f0d100d2c0d0f0d100d0f0d100c100d100d0f0d100d0f0d0f0e0f0d0f0e0f0d2c0d0f0d100d2c0d2c0d2c0d0f0d100d0f0d2c0d0f0e2b0e0f0d2c0d0f0d100d0f0d100d0f0d100d0f0d100d0f0d2c0d2c0d0f0e0f0d0f0d2c0d2c0d2c0d100d0f0d100d0f0d0f0e0f0d0f0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d100d2c0d2c0d2b0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d2c0d2c0d2c0d0f0d0f0e0f0d0f0e0f0d0f0d100d0f0d100d0f0d100d0f0d100d0f0d100d0f0d2c0d0f0e0f0d0f0e0f0d0f0e0f0d2c0d0f0d100d0f0d100d0f0d100d0f0d100d0f0d0f0e0f0d0f0e0f0d0f0e0f0d0f0d2c0d100d0f0d2c0d100d0f0d2c0d2c0d000d05000000000000000000000000

This is whats in my items
Switch Bedroom_AirCon “Air Conditioner” (Bedroom, gAirCon) { channel=“broadlink:RM2+:34:ea:35:c7:86:a6:command” }

And this is in my sitemap
Switch item=AirCon_Bedroom label=“Power” mappings=[AirCon_POWER_ON=“On”, AirCon_POWER_OFF=“Off”]

I hope someone can help me

2

Hello, I’m new and I’m going crazy …
how did you solve with the Broadlink RM3 and Openhab 1.8 interface?

If you have the procedure and examples you could post them. thank you very much