hi guys I have an electric coffee maker plugged into a Tuya Basic. In the Tuya app I created a scene to turn the coffee maker on and off after 3m15s. I’m going to put Tasmota on that device and I would like to create the same scene in Openhabian. I think the easiest thing would be to use Expire-Bin…

If you want to do this in openHAB then I would use the Expire binding, as you suggest. However, it looks like you can do this directly in Tasmota using the PulseTime command: Commands - Tasmota In the Tasmota console, just type: PulseTime 1950 and the switch will turn off 195 seconds after being…

I started from scratch and have the same log file going 2 messages per second. I’ll try more later. thank you very much for your hrlp and interest.

The same log file, featuring the Item you thought you’d deleted?

Not the same but similar showing the last things I tried but same behavior. 2 lines a second. I erased items, things and sitemap to start over. I just don’t know how is the best way to start. Some tutorial are old and they say different methods. 1-Should I use only the Visual Studio and create th…

[image] PauloGomes: I erased items, things and sitemap to start over. Don’t forget this does not erase anything created in PaperUI or anything previously autocreated by Simple Mode (which do not go away after you have turned that off) Have a browse through PaperUI to see if anything is left …

[image] PauloGomes: When I try to stop the server (sudo systemctl stop openhab2) to clean cache I got this: Warning: The unit file, source configuration file or drop-ins of openhab2.service changed on disk. Run ‘systemctl daemon-reload’ to reload units. I deleted everything on Paper UI. Wha…

[image] PauloGomes: What about this thing below? i’ve no idea, *nix stuff. Have you done what it suggests? [image] The unit file, source configuration file or drop-ins of openh ab2.service changed on disk. Run 'systemctl daemon-reload' to reload units Installation …

[image] rossko57: Have you done what it suggests? Hi. I did it and that’s fine. I can stop the server and clean the cache now. I made everything from the beginning only on Paper UI and the log is the same crazy 2 messages a second: 2020-07-13 10:11:13.546 [ome.event.ItemCommandEvent] - Item…

So what is LSitem? The last Items you showed us were named Luz_xxx

I created this. It’s the only one I have now

I have sitemap and item empty and things with just this to have mqtt: Bridge mqtt:broker:mosquitto “Mosquitto” [ host=“192.168.2.112”, port=1883, secure=false, username=“openhabian”, password=“as1689”, clientID=“Paulo” ]

How to create a simple timer scene in openhab?

rossko57 (Rossko57) July 9, 2020, 12:10pm 43

i’ve no idea, *nix stuff. Have you done what it suggests?