How to use z-wave **Soft Remote Remote Control**

Setup, Configuration and Use Scripts & Rules
, ,
1

Hi,

I have a Nodon z-wave Soft Remote Remote Control

It has a channel Scene Number

When I press a button on the remote I get a response in the event log like:

zwave_device_xxxxxxx_node10_scene_number changed from 1.0 to 2.0
zwave_device_xxxxxxx_node10_scene_number changed from 2.0 to 4.0
zwave_device_xxxxxxx_node10_scene_number changed from 4.0 to 1.0
zwave_device_xxxxxxx_node10_scene_number changed from 1.0 to 3.0
zwave_device_xxxxxxx_node10_scene_number changed from 3.0 to 4.0
zwave_device_xxxxxxx_node10_scene_number changed from 4.0 to 1.0

What is the best way to use this?

Rules? or is there some other way?
any examples or idees

2

In addition to those 4 updates. That remote also have:
Double click: X.3
Long click: X.2
Release long click: X.1

I have one “remote.rules” file which have rules for different events:
e.g:

rule "Remote (1.2)"
when
  Item soft_remote_scene received update 1.2
then
  sendCommand(Lights, OFF)
end
3

Thank you Hans,

I will experiment with that

Update: it works like a charm

4

Question,

I now use “zwave_device_xxxxxxxx_node10_scene_number” directly in my rules

I want to add this to my items file. What is het correct syntax?

Switch kitchen_remote “Remote in kitchen” {channel=“zwave_device_xxxxxxxx_node10_scene_number”}
Number kitchen_remote “Remote in kitchen” {channel=“zwave_device_xxxxxxxx_node10_scene_number”}
Text kitchen_remote “Remote in kitchen” {channel=“zwave_device_xxxxxxxx_node10_scene_number”}