Kwikest 910 lock not recognized

[schettj (John Schettino)]

Thus is my lock as seen by a fresh openhab install:
zwave:device:2a594925:node2 (Type=Thing, Status=ONLINE, Label=Z-Wave Node 002 (0090:0003:0238:0.0), Bridge=zwave:serial_zstick:2a594925)

Using This binding:
227 │ Active │ 80 │ 2.4.0 │ ZWave Binding

What did I do wrong?

[Bruce_Osborne]

@schettj

What did I do wrong?

I am not sure because you gave so little information. My guess is you installed the 11 month old stable 2.4 version.
The database entry for that device was last updated 2 months ago. You may eant to consider installing the latest Testing version, 2.5 Milestone 6. Another option would be to manually install a newer zwave binding.

Version 2.5 is expected to be released as a stable version later this month.

[schettj (John Schettino)]

Yep that’s what I did I’ll look into installing a newer binding!

[Bruce_Osborne]

This install script makes things easier…

Zigbee and zwave manual install script

A number of people have run into trouble performing manual installs of the Zigbee and Z-Wave bindings. A manual install (dropping the jar into addons) is rarely needed, but some people prefer a manual install over apt-get, or want to use a stable OH release with a recent Zigbee or Z-Wave binding. Here is a script that will hopefully make it easier to install, upgrade, and uninstall these bindings, and prevent some of the common issues. Who would benefit from this script: Anyone wanting to tes…

[schettj (John Schettino)]

Tried the script and ran into the timeout error - but was able to manually install the 2.5 binding and rediscover, locks now identified! Thanks!