MQTT topic missing from tutorial

[hafniumzinc (T)]

Does the below link help? Don’t install the embedded broker: install the 3rd party broker Mosquitto outside of openHAB.

Control Tasmota flashed devices via MQTT

Overview This tutorial follows the setup and installation of a Sonoff Basic. However, many Tasmota flashed devices have an on/off capability, so this tutorial is relevant for other Tasmota flashed devices. A Sonoff Basic is a simple mains relay, which can be flashed with Tasmota firmware and controlled from openHAB using the the MQTT binding. You can splice the Basic into anything mains powered (check the power rating first!) that you wish to switch on or off. Ingredients You will need: 1. So…

@Racerflea

I’ve followed the tutorial, installed the network binding

What tutorial is that? For this, you need the MQTT Binding, not the Network Binding.