My Rpi3 crashes a few seconds after OH2 is started (sadly automatically). The pi freezes completely. It seems that I don’t even have a chance to sudo systemctl stop openhab2.service This happend after I upgraded to 2.1.0~20170609105814-1 (Build #943) and after a neccessary shutdown. Maybe I have …

I made the two changes in config.txt. There is no boot folder shown when I inserted the sd-card into my windows pc, so I simply changed x:\config.txt. But this didn’t help. The pi crashes after the first error that is thrown by a binding (mostly caldav, sometimes weather). The macaddress in confi…

I have another rpi3 with oh2 running. It’s my testing machine. It was setup with ua-netinst from 2017/03/17 but without any upgrade. So it runs OH 2.0.0 stable. Can I move my configuration and my RaZberry zwave controller to that second machine? What do I have to do? As a first step I made a backup…

IHello @ThomDietrich , sorry that I have to say, but this really drives me crazy. I set up a fresh sd-card with the normal setup as you described (not the ua-netinst!). Then I upgraded to 2.1.0.SNAPSHOT (latest binding) and - as described in the docs - replaced the conf- and the userdata with my la…

Hey Frank, the freezing thing still baffles me. [image] FrankR: Caused by: java.io.FileNotFoundException: /var/lib/openhab2/cache/org.eclipse.osgi/.manager/.fileTableLock (Keine Berechtigung) [image] FrankR: What I saw is that all files have openhabian as owner. Maybe because I had save…

[image] ThomDietrich: Did you see the Readme in the samba network share? It warns about that problem. You can “Fix Permissions” from within sudo openhabian-config Hm, well, I must admit that I have seen the readme some months ago but forgot about it. Sorry and thanks for the hint! I will fix …

Hi @ThomDietrich , may thanks for your help,. Setting the permissions di the trick. But I am afraid I need a little more help as my RazBerry z-wave controller ist offline. In paperui I see: Status: OFFLINE - BRIDGE_OFFLINE Controller is offline I checked ls -l /dev/ttyAMA0 crw-rw---- 1 root dial…

Sorry again and thanks for your patience @ThomDietrich . I must have mixed some things from older threads. I followed your instructions at Z-Wave serial controller is offline - #8 by greenoid And now everything works fine. Had to remove “console=tty0” from /boot/cmdline.txt and set “dt-overlay=pi…

Hello Frank! Sorry for the late reply. All of these and more things are actually done via the menu entry openhabian-config → Serial Port. You could have saved yourself the trouble… Does everything work now?

Hello Thom, [image] ThomDietrich: All of these and more things are actually done via the menu entry openhabian-config -> Serial Port. That’s what I did immediately after the setup (and two more times yesterday) and it did not work. I checked all 3 options in Serial Port. But now everything …

Are you sure? In this case please tell me what you did in addition to all the things done by all three options: openhabian/openhabian-setup.sh at main · openhab/openhabian · GitHub

Need urgent help after oh2-crash

Setup, Configuration and Use Runtime

ThomDietrich ( ) June 21, 2017, 1:28pm 18

I’m sorry but I’m not able to help with the first problem without googling first.

As for the second, you can find my opinion on the matter here: