I’m running openHAB 2.5.0 Build #1590 on a Pi3. No issues. I’m struggling to get a rule to fire based on a Number:Temperature item, which is a Hue Motion Sensor. I’m trying to trigger an “alarm” when the temperature exceeds XX degrees. The item is, as below. [image] This triggers an Event; 201…

[image] [SOLVED] Comparaison with OpenWeatherMap temperature Bindings Your Item has UoM, Units of Measurement. So it’s effectively 15 °C not just 15, and comparing with just 12 is apples-and-oranges. This is one of the clumsier parts of UoM. You can either e…

What does the logInfo tell about the state of the item?

Hi @opus , Is that this? 2019-05-15 13:41:00.588 [vent.ItemStateChangedEvent] - HueLoftTemperatureSensor_Temperature changed from 32.87 °C to 33.01 °C I dn’t know if the degrees C symbol is breaking things, or if its the decimal. Its hurting my head though!

As @rossko57 posted, your item has UoM, you can see that in the received mail, the state is reported with the unit “°C”. In the log you should also see the output of the logInfo line of your rule.

Thank you guys! I tried a few variations late last night, I knew I could rely on the community! rule "Loft Temperature over 35 Degrees" when Item HueLoftTemperatureSensor_Temperature changed then if(HueLoftTemperatureSensor_Temperature.state >= 35 | "°C" ) { sendMail("blah@pomail.net", "L…

Number:Temperature Problems with IF/IF Else

Setup, Configuration and Use Scripts & Rules

rossko57 (Rossko57) May 15, 2019, 2:06pm 4