OH3 MQTT Dimmer Channel

[hafniumzinc (T)]

For some reason you need to do this same thing for your Item too. Skip to the section which starts

We have to make one small adjustment to the Item created for the Dimmer Channel:

in this tutorial:

[OH3] Ikea Tradfri LED1649C5 e14 dimming bulb via zigbee2mqtt

Foreword This tutorial is for openHAB3. If you are on openHAB2 you will need to use my older tutorial . We have an Ikea Tradfri e14 400lm dimmable bulb. Here is how I integrated into openHAB, via zigbee2mqtt and Mosquitto . This tutorial was written with openHAB3 running on a headless Raspberry Pi 3B with Raspberry Pi OS, with SSH access. Overview This tutorial assumes you have openHAB3 installed. This tutorial will show you how to: Install an MQTT broker, install the MQTT binding, and c…