hi i have a sonoff and i want to command it from openhab by rasberry pi. This is the configuration of the sonoff: [image] mqtt.cfg: # URL to the MQTT broker, e.g. tcp://localhost:1883 or ssl://localhost:8883 localbroker.url=tcp:the ip of the raspberry:1883 # Optional. User id to authenticate…

ok i followed the topic and i changed the sonoff.item so: Switch LivingRoom_Light "Interruttore WiFi Sonoff" <light> (LR,gLight) {channel="mqtt:topic:b7bb37dc:Power1"} but i continue to have problem to command by the bottom of openhab the sonoff. I report the images of my openhan [image] [i…

Now by MQTT.fx i am able to se the message that the switch of openhab send but the sonoff don’t change the status

[image] fzonno: i followed the topic and i changed the sonoff.item so: Switch LivingRoom_Light "Interruttore WiFi Sonoff" <light> (LR,gLight) {channel="mqtt:topic:b7bb37dc:Power1"} but i continue to have problem to command by the bottom of openhab the sonoff. If using files try changing t…

Thanks Now it work. I want to command a sonoff dual but in this way i command only 1 exit. Can you help me?

You have created a channel for Power1, do the same for Power2.

These are the configs of my two switches of the Sonoff dual [Screenshot_20190313-112011_Chrome] [Screenshot_20190313-112000_Chrome]

this is the result [image] when i push one also the other turn on but i setted the interlock. I command the same [image] [image]

openHAB Community

Openhab and Sonoff Switch

Tutorials & Examples Solutions

opus (Jürgen Baginski) March 12, 2019, 8:32pm 2

Please read in Here.
You are doing the same mistake by using the syntax of the MQTT 1 binding while having the MQTT 2.4 binding installed.