Platform information: Hardware: RPi2 with sd-card OS: RaspbianOS latest version Java Runtime Environment: openjdk version “11.0.9.1” 2020-11-04 OpenJDK Runtime Environment (build 11.0.9.1+1-post-Raspbian-1deb10u2) OpenJDK Server VM (build 11.0.9.1+1-post-Raspbian-1deb10u2, mixed mode) openHAB…

[image] deltabert: mosquitto: container_name: mosquitto image: eclipse-mosquitto restart: unless-stopped user: “1883” ports: “1883:1883” volumes: ./volumes/mosquitto/data:/mosquitto/data ./volumes/mosquitto/log:/mosquitto/log ./volumes/mosquitto/pwfile:/mosquitto/pwfile ./services/mosqui…

I am sorry, but i was using fence code: [image] But for some reason this did not worked as intenden. But the code should be YAML formatted, and it is on my system; the docker-compose install install went without errors.

mosquitto volumes are not used by openHAB though.

Does user 9000 (I think, look at the Dockerhub writeup) have permission to read and write to all the voulmes you’ve mounted?

@rikoshak Yes i think you are right, it must have something to do with user/group rights. I did not payed attention to this when installing my iotstack… I’l have to look into this. @Bruce_Osborne , I know mosquitto is not part of openhab. I should not have included it in my description. But my IOT…

Actually I somehow missed the openHAB part. Sorry about that.

Ok, started from scratch; removed all containers and images, so a clean docker environment. Removed old user and group openhab and (re)created new ones, following the openhab docs. user openhab with UID 9001, group openhab with GID 9001. (also acc. the User and Group Identifiers as shown in the Do…

[image] deltabert: sudo useradd -r -s /sbin/nologin openhab What are the user & group IDs of this user? ud -g openhab and id -u openhab If they are not both 9001 you need to change your docker run command.

Hi Bruce, They are correct in my opinion: pi@oh-241:~ $ id openhab uid=9001(openhab) gid=9001(openhab) groups=9001(openhab) As i wrote, i purposely deleted the user and group, and recreated them again with the correct UID/GID. I followed the staps in Docker | openHAB and opted for Runnin…

Ok, i changed tactic. I left the Sensors/IOTstack approach and started with an new sd-card. Installed Docker and then i followed the steps from the openHAB docs including the /opt/openhab directory for the install volumes. This is working OK. So there must be something in the Sensors/IOTstack scr…

openHAB3 docker; unable to install addons

Setup, Configuration and Use Installation

Bruce_Osborne (Bruce Osborne) December 30, 2020, 5:58pm 2

This relates to openHAB how?
Please use code fences.
How to use code fences - Tutorials & Examples - openHAB Community