I am opening this thread as a platform to discuss the implementation of the Hue CLIP 2 API v2 in the Hue openHAB binding. openHAB Pull Request for CLIP 2 implementation Discussion thread on Philips Hue Developer Portal

[image] andrewfg: but perhaps you can turn on log DEBUG to catch the next time you get the error? okay, DEBUG is enabled. I am also on bridge FW 1959097030.

@seime apologies for the delay, but there is a new Jar which fixes the scene actualisation and dynamics. It is in the usual place HERE

Thanks @AndrewFG , openhab> bundle:list|grep hue 356 │ Active │ 80 │ 3.4.3.202304251442 │ openHAB Add-ons :: Bundles :: hue Binding Found this: 3dcdda92-3d88-4ef0-80b1-3530bb110ebe -> updateState() 'light-level' updated to '11853' - light-levels are reported by a factor of 100 I guess? Somet…

[image] seime: light-levels are reported by a factor of 100 I guess? See the following from the Hue API v2 documentation: Light level in 10000*log10(lux) +1 measured by sensor. Logarithmic scale used because the human eye adjusts to light levels and small changes at low lux levels are more …

[image] seime: two my room/zones do no longer have a scene channel - which they had before restart Can you please give me the resource id (the Hue resource id) of those things, so I can find them easier in your logs?

Bridge hue:bridge-api2:stue "Hue Bridge Stue, Trapp og kjøkken (Ny)" [.. ] { Thing zone trappSpotter "Trapp spotter (lysgruppe)" [resourceId="2d5e0450-7b54-4c00-86cb-e487c041512c"] // Zone idV1:/groups/10 Thing room stue "Stue (lysgruppe)" [resourceId="b207b5ce-4cc4-4b4d-9242-74d938d66c17"] // Roo…

[image] AndrewFG: to answer my own question, I think the answer should be ‘yes’… Definately :slight_smile:

@seime I made yet another attempt to fix the scene initialization timing, and also the units of measure of the light level and dynamics channels. Jars in the usual place..

Im having an issue with the brightness of a hue ambiance candle bulb. If I use “openhab:send 1” to the bulb, the bulb goes dark and is 0% in the hue app. If I use “openhab:send 2”, the bulb goes on and is 2% in the hue app. All numbers from 2-100 are correctly set and are shown with the same n…

[image] Fred_Dobler: If I use “openhab:send 1” to the bulb, the bulb goes dark and is 0% in the hue app. If I use “openhab:send 2”, the bulb goes on and is 2% in the hue app. All lights when they are on have a maximum and minimum lumen output. If you command below the minimum, it is interpre…

can be, don’t know for sure, the old hue binding did stay on with sendCommand(1) with the same bulb

openHAB Community

Philips Hue CLIP 2 API v2 Discussion Thread

Add-ons Bindings

seime (Arne S) April 27, 2023, 9:02am 135

Definately