Hi All my SD card corrupted on the pi 3 so decided to rebuild on a pi 4 Its just not booting reliably after multiple reseats of the card and power cycles I can get it to boot from cold but never from a reboot shuts down but wont restart its not a lack of power issue was using the official pi PS…

got my replacement pi today put Sd card in powered up first go reboot every time first time ive had a doa pi got 5 of the 3s all fine

I assume you are using openHABian. Did you use the latest openHABian v1.5 release? [image] Release openHABian v1.5 based on Debian Buster supports RPi4 ·... Finally, we have Raspberry Pi 4 support! 🚀 To achieve that we have upgraded our base operation system to Raspbian Buster. As usua…

yes downloaded it this morning I’m going back to using the pi 3B for now and try and sort this out later as wasted a day on this already

Just to make sure… You did not reuse the old SD-Card, right? :smiley:

No I used a brand new out the box cards think this seller may have ripped me off with the psu the pi 4 needs 5.1V stable and the ones they sent are labeled 5v and look nothing like the official ones they sold them as have ordered a new psu and will retest

https://www.raspberrypi.org/products/raspberry-pi-4-model-b/specifications/ Quote: * 5V DC via USB-C connector (minimum 3A*) * 5V DC via GPIO header (minimum 3A*) How much Ampere does your current power supply deliver?

Did you try the default raspbian image?

no will try that tomorrow have run out of time with is now as need to go to work

Alright, wish you a relaxed shift :slight_smile:

[image] arden: no will try that tomorrow I have found the easiest way is to install NOOBS. You can then install Raspbian Lite and follow the openHABian install instructions for Linux. https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/2

openHAB Community

Raspberry pi 4 reboot issues

Setup, Configuration and Use Installation

mstormi (Markus Storm) March 6, 2020, 2:31pm 18

I’d consider to setup your new box using the ZRAM feature in openHABian.
No need for an off-mainstream solution with external HW.