Rfxcom binding: Need help getting device id + unit

Add-ons Bindings
,
1

Hi All,

We just installed motorized blinds using the AOK AC-123 model which is compatible with the RFXtrx433XL transceiver. I have RFXmgr installed on a Windows PC with the transceiver attached and using the blinds remote to send RF signals to the transceiver and display in RFXmgr. In RFXMgr, in the Main tab, I have “undec on” and “Blinds Tx” checked off and selected Set Mode.

When I press the “Close” button on the Blind remote, I get the following output in RFXmgr:

------------------------------------------------
2022-01-24 05:33:08:267= 05030F1C0700
Packettype        = UNDECODED RF Message
UNDECODED Blinds:0700 
------------------------------------------------
2022-01-24 05:33:08:377= 06030F1D1087B9
Packettype        = UNDECODED RF Message
UNDECODED Blinds:1087B9 
------------------------------------------------
2022-01-24 05:33:08:595= 05030F1E0700
Packettype        = UNDECODED RF Message
UNDECODED Blinds:0700 
------------------------------------------------
2022-01-24 05:33:08:830= 06030F1F10497B
Packettype        = UNDECODED RF Message
UNDECODED Blinds:10497B

I don’t know how to decode this to get the device id and unit number for use in Openhab 3.2.0.
Anyone able to help here?

Thanks,
Randy

2

Hi,
I’m getting similar for a couple of new RF433 remotes I’ve just got, but I can’t figure out what to send.
I’ve created an RFX433 Undecoded Thing and tried sending various permutations of the hex I got in RFXManager, but it doesn’t work.

Anyone got this working?

Thanks,
Richie