RFXCOM Lighting5 results in 2 things for open/close?

[Christoph_B]

Hi there,

I ordered some 433mhz chinese door/window sensors and noticed that they are recognized as Lighting 5, but I get two things for one device:

Closing the switch triggers ON on dev 4
Opening it triggers ON on dev 6

2018-02-06 12:18:12.579 [vent.ItemStateChangedEvent] - rfxcom_lighting5_fa6a004d_487152_6_command changed from OFF to ON
2018-02-06 12:18:13.912 [vent.ItemStateChangedEvent] - rfxcom_lighting5_fa6a004d_487152_4_command changed from OFF to ON

How can/should I handle this?

[rlkoshak (Rich Koshak)]

Design Pattern: Proxy Item

Please see Design Pattern: What is a Design Pattern and How Do I Use Them for information on what a DP is and how to use them. Problem Statement Often one faces one or more of the following situations: the need to perform additional logic before sending a command to a device the need to send a command to multiple devices based on a single event the need to do something different based on the state of one or more other Items the channel to update the state of an Item and the channel to send c…

[Christoph_B]

Thanks a lot!