Hi @chris,
i noticed that the items is getting changed to 100% after the UP command, ist that correct?
cause if i remember right in OH 2.1 it was 0%
Node 9 is the on i tested it in this case.
2018-07-01 21:15:05.890 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Command received zwave:device:15c214568f7:node9:blinds_control --> UP
2018-07-01 21:15:05.920 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 9: Creating new message for command SWITCH_MULTILEVEL_START_LEVEL_CHANGE
2018-07-01 21:15:05.936 [DEBUG] [ve.internal.protocol.ZWaveController] - Message queued. Queue length = 1. Queue={}
2018-07-01 21:15:05.939 [DEBUG] [ocol.ZWaveController$ZWaveSendThread] - Took message from queue for sending. Queue length = 0
2018-07-01 21:15:05.954 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0C 00 13 09 05 26 04 20 00 FF 25 10 24
2018-07-01 21:15:05.967 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 9: Sending REQUEST Message = 01 0C 00 13 09 05 26 04 20 00 FF 25 10 24
2018-07-01 21:15:05.991 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8
2018-07-01 21:15:05.996 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:06.000 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 01 13 01 E8
2018-07-01 21:15:06.005 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 04 01 13 01 E8
2018-07-01 21:15:06.009 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=SendData[0x13], type=Response[0x01], priority=High, dest=255, callback=0, payload=01
2018-07-01 21:15:06.016 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 9: Sent Data successfully placed on stack.
2018-07-01 21:15:06.013 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 10 00 00 02 F9
2018-07-01 21:15:06.023 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:06.026 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 13 10 00 00 02 00 00 F7
2018-07-01 21:15:06.030 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 13 10 00 00 02 00 00 F7
2018-07-01 21:15:06.034 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=SendData[0x13], type=Request[0x00], priority=High, dest=255, callback=0, payload=10 00 00 02
2018-07-01 21:15:06.037 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 9: SendData Request. CallBack ID = 16, Status = Transmission complete and ACK received(0)
2018-07-01 21:15:06.041 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Starting initialisation from DONE
2018-07-01 21:15:06.045 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@1c584b2 already registered
2018-07-01 21:15:06.048 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Sent Message: class=SendData[0x13], type=Request[0x00], priority=Set, dest=9, callback=16, payload=09 05 26 04 20 00 FF
2018-07-01 21:15:06.052 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Recv Message: class=SendData[0x13], type=Request[0x00], priority=High, dest=255, callback=0, payload=10 00 00 02
2018-07-01 21:15:06.055 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: class=SendData, callback id=16, expected=SendData, cancelled=false transaction complete!
2018-07-01 21:15:06.058 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveTransactionCompletedEvent
2018-07-01 21:15:06.062 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2018-07-01 21:15:06.065 [DEBUG] [ocol.ZWaveController$ZWaveSendThread] - NODE 9: Response processed after 85ms/4955ms.
2018-07-01 21:15:06.382 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 16 03 80 03 45 21
2018-07-01 21:15:06.386 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:06.390 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 16 03 80 03 45 21
2018-07-01 21:15:06.394 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 16 03 80 03 45 21
2018-07-01 21:15:06.398 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 16 03 80 03 45
2018-07-01 21:15:06.402 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Application Command Request (ALIVE:DONE)
2018-07-01 21:15:06.405 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Starting initialisation from DONE
2018-07-01 21:15:06.409 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@be8bc7 already registered
2018-07-01 21:15:06.413 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Incoming command class BATTERY
2018-07-01 21:15:06.416 [DEBUG] [ommandclass.ZWaveBatteryCommandClass] - NODE 22: Received Battery Request
2018-07-01 21:15:06.420 [DEBUG] [ommandclass.ZWaveBatteryCommandClass] - NODE 22: Battery report value = 69
2018-07-01 21:15:06.424 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
2018-07-01 21:15:06.428 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-07-01 21:15:06.432 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0C 00 04 00 16 06 43 03 01 42 01 90 75
2018-07-01 21:15:06.432 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Got a value event from Z-Wave network, endpoint = 0, command class = BATTERY, value = 69
2018-07-01 21:15:06.435 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Updating channel state zwave:device:15c214568f7:node22:battery-level to 69 [DecimalType]
2018-07-01 21:15:06.445 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Transaction not completed: node address inconsistent. lastSent=9, incoming=255
2018-07-01 21:15:06.450 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:06.454 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0C 00 04 00 16 06 43 03 01 42 01 90 75
2018-07-01 21:15:06.457 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 0C 00 04 00 16 06 43 03 01 42 01 90 75
2018-07-01 21:15:06.460 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 16 06 43 03 01 42 01 90
2018-07-01 21:15:06.463 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Application Command Request (ALIVE:DONE)
2018-07-01 21:15:06.466 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Starting initialisation from DONE
2018-07-01 21:15:06.469 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@be8bc7 already registered
2018-07-01 21:15:06.473 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Incoming command class THERMOSTAT_SETPOINT
2018-07-01 21:15:06.476 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 22: Received Thermostat Setpoint Request
2018-07-01 21:15:06.479 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 22: Thermostat Setpoint report Scale = 0
2018-07-01 21:15:06.482 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 22: Thermostat Setpoint Value = 4
2018-07-01 21:15:06.485 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 22: Thermostat Setpoint Report, Type Heating (1), value = 4
2018-07-01 21:15:06.488 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveThermostatSetpointValueEvent
2018-07-01 21:15:06.491 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Got an event from Z-Wave network: ZWaveThermostatSetpointValueEvent
2018-07-01 21:15:06.494 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Got a value event from Z-Wave network, endpoint = 0, command class = THERMOSTAT_SETPOINT, value = 4
2018-07-01 21:15:06.497 [DEBUG] [converter.ZWaveCommandClassConverter] - Converted temperature from 4C to 4C
2018-07-01 21:15:06.500 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Updating channel state zwave:device:15c214568f7:node22:thermostat_setpoint_heating to 4 [DecimalType]
2018-07-01 21:15:06.501 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0A 00 04 00 16 04 46 08 00 7F D2
2018-07-01 21:15:06.508 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Transaction not completed: node address inconsistent. lastSent=9, incoming=255
2018-07-01 21:15:06.511 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:06.515 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0A 00 04 00 16 04 46 08 00 7F D2
2018-07-01 21:15:06.517 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 0A 00 04 00 16 04 46 08 00 7F D2
2018-07-01 21:15:06.520 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 16 04 46 08 00 7F
2018-07-01 21:15:06.523 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Application Command Request (ALIVE:DONE)
2018-07-01 21:15:06.525 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Starting initialisation from DONE
2018-07-01 21:15:06.528 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@be8bc7 already registered
2018-07-01 21:15:06.530 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Incoming command class CLIMATE_CONTROL_SCHEDULE
2018-07-01 21:15:06.533 [DEBUG] [veClimateControlScheduleCommandClass] - NODE 22: Received CLIMATE_CONTROL_SCHEDULE command V1
2018-07-01 21:15:06.535 [INFO ] [veClimateControlScheduleCommandClass] - NODE 22 reported: Override type: NO_OVERRIDE, ScheduleState: [UNUSED]
2018-07-01 21:15:06.538 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Transaction not completed: node address inconsistent. lastSent=9, incoming=255
2018-07-01 21:15:06.569 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 08 00 04 00 16 02 84 07 64
2018-07-01 21:15:06.572 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:06.575 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 08 00 04 00 16 02 84 07 64
2018-07-01 21:15:06.578 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 08 00 04 00 16 02 84 07 64
2018-07-01 21:15:06.581 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 16 02 84 07
2018-07-01 21:15:06.583 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Application Command Request (ALIVE:DONE)
2018-07-01 21:15:06.586 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Starting initialisation from DONE
2018-07-01 21:15:06.588 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@be8bc7 already registered
2018-07-01 21:15:06.591 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Incoming command class WAKE_UP
2018-07-01 21:15:06.594 [DEBUG] [commandclass.ZWaveWakeUpCommandClass] - NODE 22: Received Wake Up Request
2018-07-01 21:15:06.596 [DEBUG] [commandclass.ZWaveWakeUpCommandClass] - NODE 22: Received WAKE_UP_NOTIFICATION
2018-07-01 21:15:06.598 [DEBUG] [commandclass.ZWaveWakeUpCommandClass] - NODE 22: Is awake with 0 messages in the wake-up queue.
2018-07-01 21:15:06.601 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveWakeUpEvent
2018-07-01 21:15:06.604 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Got an event from Z-Wave network: ZWaveWakeUpEvent
2018-07-01 21:15:06.619 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Transaction not completed: node address inconsistent. lastSent=9, incoming=255
2018-07-01 21:15:07.620 [DEBUG] [commandclass.ZWaveWakeUpCommandClass] - NODE 22: No more messages, go back to sleep
2018-07-01 21:15:07.623 [DEBUG] [commandclass.ZWaveWakeUpCommandClass] - NODE 22: Creating new message for application command WAKE_UP_NO_MORE_INFORMATION
2018-07-01 21:15:07.627 [DEBUG] [ocol.ZWaveController$ZWaveSendThread] - Took message from queue for sending. Queue length = 0
2018-07-01 21:15:07.630 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 13 16 02 84 08 25 11 49
2018-07-01 21:15:07.634 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 22: Sending REQUEST Message = 01 09 00 13 16 02 84 08 25 11 49
2018-07-01 21:15:07.636 [DEBUG] [ve.internal.protocol.ZWaveController] - Message queued. Queue length = 0. Queue={}
2018-07-01 21:15:07.650 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8
2018-07-01 21:15:07.654 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:07.658 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 04 01 13 01 E8
2018-07-01 21:15:07.661 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 04 01 13 01 E8
2018-07-01 21:15:07.665 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=SendData[0x13], type=Response[0x01], priority=High, dest=255, callback=0, payload=01
2018-07-01 21:15:07.668 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 22: Sent Data successfully placed on stack.
2018-07-01 21:15:07.687 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 11 00 00 04 FE
2018-07-01 21:15:07.691 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:07.694 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 13 11 00 00 04 00 00 F0
2018-07-01 21:15:07.697 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 13 11 00 00 04 00 00 F0
2018-07-01 21:15:07.700 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=SendData[0x13], type=Request[0x00], priority=High, dest=255, callback=0, payload=11 00 00 04
2018-07-01 21:15:07.702 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 22: SendData Request. CallBack ID = 17, Status = Transmission complete and ACK received(0)
2018-07-01 21:15:07.705 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 22: Starting initialisation from DONE
2018-07-01 21:15:07.708 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@be8bc7 already registered
2018-07-01 21:15:07.711 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Sent Message: class=SendData[0x13], type=Request[0x00], priority=Immediate, dest=22, callback=17, payload=16 02 84 08
2018-07-01 21:15:07.714 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Recv Message: class=SendData[0x13], type=Request[0x00], priority=High, dest=255, callback=0, payload=11 00 00 04
2018-07-01 21:15:07.717 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: class=SendData, callback id=17, expected=SendData, cancelled=false transaction complete!
2018-07-01 21:15:07.720 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveTransactionCompletedEvent
2018-07-01 21:15:07.723 [DEBUG] [commandclass.ZWaveWakeUpCommandClass] - NODE 22: Went to sleep
2018-07-01 21:15:07.726 [DEBUG] [commandclass.ZWaveWakeUpCommandClass] - NODE 22: Is sleeping
2018-07-01 21:15:07.728 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 22: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2018-07-01 21:15:07.731 [DEBUG] [ocol.ZWaveController$ZWaveSendThread] - NODE 22: Response processed after 90ms/4955ms.
2018-07-01 21:15:08.062 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 09 03 26 03 63 BE
2018-07-01 21:15:08.065 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:08.068 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 09 03 26 03 63 BE
2018-07-01 21:15:08.071 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 09 03 26 03 63 BE
2018-07-01 21:15:08.074 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 09 03 26 03 63
2018-07-01 21:15:08.077 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Application Command Request (ALIVE:DONE)
2018-07-01 21:15:08.079 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Starting initialisation from DONE
2018-07-01 21:15:08.081 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0C 00 04 00 09 06 31 05 04 22 00 00 EA
2018-07-01 21:15:08.084 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@1c584b2 already registered
2018-07-01 21:15:08.087 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Incoming command class SWITCH_MULTILEVEL
2018-07-01 21:15:08.089 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 9: Received SWITCH_MULTILEVEL command V3
2018-07-01 21:15:08.091 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 9: Switch Multi Level report, value = 99
2018-07-01 21:15:08.094 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
2018-07-01 21:15:08.096 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-07-01 21:15:08.098 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got a value event from Z-Wave network, endpoint = 0, command class = SWITCH_MULTILEVEL, value = 99
2018-07-01 21:15:08.101 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Updating channel state zwave:device:15c214568f7:node9:blinds_control to 100 [PercentType]
2018-07-01 21:15:08.106 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Transaction not completed: node address inconsistent. lastSent=22, incoming=255
2018-07-01 21:15:08.125 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-07-01 21:15:08.130 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0C 00 04 00 09 06 31 05 04 22 00 00 EA
2018-07-01 21:15:08.133 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 0C 00 04 00 09 06 31 05 04 22 00 00 EA
2018-07-01 21:15:08.136 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 09 06 31 05 04 22 00 00
2018-07-01 21:15:08.139 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Application Command Request (ALIVE:DONE)
2018-07-01 21:15:08.141 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 9: Starting initialisation from DONE
2018-07-01 21:15:08.144 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@1c584b2 already registered
2018-07-01 21:15:08.147 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Incoming command class SENSOR_MULTILEVEL
2018-07-01 21:15:08.148 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Received COMMAND_CLASS_SENSOR_MULTILEVEL command V2
2018-07-01 21:15:08.150 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Multi Level REPORT received
2018-07-01 21:15:08.152 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Type = Power(4), Scale = 0
2018-07-01 21:15:08.153 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Value = 0E+1
2018-07-01 21:15:08.155 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveMultiLevelSensorValueEvent
2018-07-01 21:15:08.156 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got an event from Z-Wave network: ZWaveMultiLevelSensorValueEvent
2018-07-01 21:15:08.158 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got a value event from Z-Wave network, endpoint = 0, command class = SENSOR_MULTILEVEL, value = 0E+1
2018-07-01 21:15:08.160 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Updating channel state zwave:device:15c214568f7:node9:sensor_power to 0 [DecimalType]
2018-07-01 21:15:08.163 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 22: Transaction not completed: node address inconsistent. lastSent=22, incoming=255