Hi, my rollershutters are driving down (value 100) when pressing in BasicUI the arrow down button. They are stopping if pressing the middle button. Values of percentage closed are correctly displayed. BUT If I am pressing button arrow up nothing happens. I guess the button is sending command/va…

[image] Homer-Sim: is there another mistake? The mistake I see is that there is not enough information here for anybody to make an informed suggestion.

my fault, what exactly do you need. all is running except BasicUI up command. HabPanel with blinds widget all is working

Sounds a bit like this thread maybe [image] Rollershutter Item with MQTT commands Bindings Hi there, I try to integrate Dooya Rollershutters into openhab2. The motors are connected via 433MHz to a fhem installation with nanoCul Signalduino. From openhab I cont…

[image] Homer-Sim: my fault, what exactly do you need. Just off the top of my head: Version of OH Type of Thing (binding used) for the rollershutter What you have already tried Messages in the logs You may find some good hints here. [image] How to ask a good questi…

Version of OH 2.4.0 Type of Thing (binding used) for the rollershutter homematic Messages in the logs event.log: 2019-08-03 23:57:04.286 [ome.event.ItemCommandEvent] - Item 'WohnzimmerRollo_W_IN' received command UP 2019-08-03 23:57:04.292 [nt.ItemStatePredictedEvent] - WohnzimmerRollo_W_IN p…

[image] Homer-Sim: my fault, what exactly do you need. [image] How to ask a good question / Help Us Help You Tutorials & Examples Before you ask… Community forum is NOT a helpdesk Let’s put this in the front: nobody here works for openHAB. The community …

Did this get lost due to last post? Version of OH 2.4.0 Type of Thing (binding used) for the rollershutter homematic Messages in the logs event.log: 2019-08-03 23:57:04.286 [ome.event.ItemCommandEvent] - Item 'WohnzimmerRollo_W_IN' received command UP 2019-08-03 23:57:04.292 [nt.ItemStatePre…

I am a little bit sad that no one answered. Even if I understand that you did stop helping if you do not get right format of questions. I’m still fighting with this point. Today I mad a new attempt in PaperUI and I guess it explanes the issue very good. Values if rollershutter is completly open/u…

It looks like a mismatch by the binding between decimal and percent.

[image] Homer-Sim: bring all in one Threat : Not your best idea :wink:

Rollershutter in Basic UI not driving up

Setup, Configuration and Use Items & Sitemaps

mstormi (Markus Storm) August 3, 2019, 11:53pm 7