-
Platform information:
Release = Raspbian GNU/Linux 9 (stretch)
Kernel = Linux 4.9.80-v7+
Platform = Raspberry Pi 3 Model B Rev 1.2 -
Java Runtime Environment:
openjdk version “1.8.0_152”
OpenJDK Runtime Environment (Zulu Embedded 8.25.0.76-linux-aarch32hf) (build 1.8.0_152-b76)
OpenJDK Client VM (Zulu Embedded 8.25.0.76-linux-aarch32hf) (build 25.152-b76, mixed mode, Evaluation) -
openHAB version:
openHAB 2.3.0~20180314204401-1 (Build #1227)
I tried to install a 433Mhz transmitter as it is described here OpenHAB Exec Binding explained in detail on 433MHz radio transmitter example.
I’m getting log errors when uploading the rules file to my installation. This just happens at the first time uploading. All following uploads don’t send any message. In either case the I can’t switch the transmitter. At the command line the ophenhab user has the rights to execute the command (/opt/433Utils/RPi_utils/codesend 1361) and the switch reacts as expected.
2018-03-15 16:22:36.565 [INFO ] [el.core.internal.ModelRepositoryImpl] - Refreshing model 'powerplugs.rules'
2018-03-15 16:22:36.959 [ERROR] [ntime.internal.engine.RuleEngineImpl] - Rule 'Poweroutlet A': An error occurred during the script execution: null
2018-03-15 16:22:36.962 [ERROR] [ntime.internal.engine.RuleEngineImpl] - Rule 'Poweroutlet A': An error occurred during the script execution: null
2018-03-15 16:22:36.964 [ERROR] [ntime.internal.engine.RuleEngineImpl] - Rule 'Poweroutlet A': An error occurred during the script execution: null
2018-03-15 16:22:36.967 [ERROR] [ntime.internal.engine.RuleEngineImpl] - Rule 'Poweroutlet A': Script interpreter couldn't be obtain
2018-03-15 16:22:36.961 [ERROR] [ntime.internal.engine.RuleEngineImpl] - Rule 'Poweroutlet A': An error occurred during the script execution: null
2018-03-15 16:22:36.967 [ERROR] [ntime.internal.engine.RuleEngineImpl] - Rule 'Poweroutlet A': An error occurred during the script execution: null
Nevertheless I get following messages in my log when switching:
2018-03-15 16:26:51.632 [vent.ItemStateChangedEvent] - Power_Plug_Socket_A changed from OFF to ON
2018-03-15 16:26:52.583 [ome.event.ItemCommandEvent] - Item 'Power_Plug_Socket_A' received command OFF
2018-03-15 16:26:52.622 [ome.event.ItemCommandEvent] - Item 'Remote_Send_Args' received command 1364
2018-03-15 16:26:52.630 [vent.ItemStateChangedEvent] - Power_Plug_Socket_A changed from ON to OFF
2018-03-15 16:26:52.643 [vent.ItemStateChangedEvent] - Remote_Send_Args changed from 1361 to 1364
Here is my things file:
Thing exec:comand:remote-send [
command="/opt/433Utils/RPi_utils/codesend %2$s",
interval=0,
autorun=true
]
My items file
Switch Power_Plug_Socket_A <poweroutlet>
Switch Power_Plug_Socket_B <poweroutlet>
Switch Power_Plug_Socket_C <poweroutlet>
Switch Remote_Send { channel="exec:command:remote-send:run" }
String Remote_Send_Args { channel="exec:command:remote-send:input" }
String Remote_Send_Out { channel="exec:command:remote-send:output" }
My rules file
rule "Poweroutlet A"
when
Item Power_Plug_Socket_A received command
then
// wait for transmitter to be free
// State will be NULL if not used before or ON while command is executed
while(Remote_Send.state == ON){
Thread::sleep(500)
}
if(receivedCommand == ON){
Remote_Send_Args.sendCommand("1361")
}else{
Remote_Send_Args.sendCommand("1364")
}
// wait for the command to complete
while(Remote_Send.state != OFF){
Thread::sleep(500)
}
logInfo("Power_Plug", "Result:" + Remote_Send_Out.state )
end
rule "Poweroutlet B"
when
Item Power_Plug_Socket_B received command
then
// wait for transmitter to be free
// State will be NULL if not used before or ON while command is executed
while(Remote_Send.state == ON){
Thread::sleep(500)
}
if(receivedCommand == ON){
Remote_Send_Args.sendCommand("5207728 4 355")
}else{
Remote_Send_Args.sendCommand("4908304 4 355")
}
// wait for the command to complete
while(Remote_Send.state != OFF){
Thread::sleep(500)
}
logInfo("Power_Plug", "Result:" + Remote_Send_Out.state )
end
rule "Poweroutlet C"
when
Item Power_Plug_Socket_C received command
then
// wait for transmitter to be free
// State will be NULL if not used before or ON while command is executed
while(Remote_Send.state == ON){
Thread::sleep(500)
}
if(receivedCommand == ON){
Remote_Send_Args.sendCommand("5207732 4 355")
}else{
Remote_Send_Args.sendCommand("4258212 4 355")
}
// wait for the command to complete
while(Remote_Send.state != OFF){
Thread::sleep(500)
}
logInfo("Power_Plug", "Result:" + Remote_Send_Out.state )
end
And my sitemap file:
sitemap default label="My first sitemap"
{
Frame label="Funkschaltdosen"
{
Switch item=Power_Plug_Socket_A label="Power Plug A"
Switch item=Power_Plug_Socket_B label="Power Plug B"
Switch item=Power_Plug_Socket_C label="Power Plug C"
}
}
I read a lot of articles but didn’t find a solution. Could you please help me?
Maybe @Josar is arround here?
